Engineering Commons^™

Cold Formed Standard Steel Products In A Low Cost House Construction Method, Robert W. Dannemann

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Aisi Design Criteria For Bolted Connections, Wei-Wen Yu

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Web Crippling Of Decks Subjected To Two Flange Loading, B. A. Wing, R. M. Schuster

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Effective Lengths For Laterally Unbraced Compression Flanges Of Continuous Beams Near Intermediate Supports, G. Haaijer, J. H. Garrett Jr., K. H. Klippstein

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Purlin Failures In The Vicinity Of Lap Joints And Internal Supports, K. T. Kavanagh

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Flexural Buckling In Cold-Formed Steel Structural Members, Peter Lorincz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Interactive Buckling In Thinwalled Columns, Srinivasan Sridharan, Rafael Benito

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

The Strength Of Cold-Formed Portal Frames, A. H. Baigent, Gregory J. Hancock

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Behavior Of C- And Z-Purlins Under Wind Uplift, Parviz Soroushian, Teoman Peköz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Combined Compression And Lateral Loads On Load Bearing Steel Stud Walls, Paul G. Schurter, R. M. Schuster, Andrew S. Zakrzewski

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Composite Steel Deck Diaphragm Slabs -- Design Modes, Max L. Porter, Lowell F. Greimann

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Composite Cold-Formed Steel-Concrete Structural System, George Abdel-Sayed

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Cold-Formed Steel: Research To Design, Albert L. Johnson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Teaching Cold-Formed Steel Design To Technologists, Richard K. Keplar, Edward R. Estes Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Cold Formed Steel Applications Abroad, Rolf Baehre, Bao-Kang He, Gerard Moreau, Kazumi Sakae, E. R. Bryan, Teoman Peköz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Buckling Of Eccentrically Loaded Curved Panels, Ted T. Sokol Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Buckling Strength Of Cold-Formed Steel Curved Panels, James L. Jorgenson, Asadul H. Chowdhury

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

The Post Buckling Behaviour Of Bending Elements, J. Rhodes

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Ultimate Moment Capacity Of Thin-Walled Cold-Formed Members Of Vehicular Structures, Frank Monasa, Timothy Chipman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Sidor's Design Aids For Cold-Formed Steel Beams And Columns, Arnaldo R. Gutierrez, O. Jorge Espinoze

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Dynamic Behavior Of Locally Buckled Frames, George E. Blandford, Shien T. Wang, Neng T. Wang

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Comparison Of Methods Predicting Diaphram Behavior, Paul E. Liedtke, Donald R. Sherman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Analysis Of Local Plate Buckling Experimental Data, J. Roorda, K. R. Venkataramaiah

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Shear Resistance Of Steel-Stud Wall Panels, Joseph D. Girard, Thomas S. Tarpy Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Acuta Enews November 1982, Vol. 11, No. 11

ACUTA Newsletters

In This Issue

INSIDE ACUTA

PARTY LINE

FROM THE BOARD

"MOUTH OF THE SOUTH"

POTPOURRI

Review Of Pertinent Contract Documents Tennessee-Tombigbee Waterway Divide Cut Section 3a, Ronald D. Hughes, Robert C. Deen, David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

During construction of a portion of the Tombigbee Canal near Corinth, Mississippi, southward from Pickwick Lake (Station 13,118+00 to 13,337+50), the Contractor reported various problems, which he termed "differing site conditions." Some of the items considered as problems by the Contractor were: the amount of cherty Paleozoic material was far less than he expected or anticipated, there were deep deposits of bluish muck, the alluvial was not sufficiently stable to place in 1-foot lifts, excessively wet materials made it necessary to shift equipment frequently, the equipment had to travel over bad roads, and the materials had no bearing strength.

Strain Energy Analysis Of Pavement Designs For Heavy Trucks, Herbert F. Southgate, Robert C. Deen, Jesse G. Mayes

Kentucky Transportation Center Research Report

The first portion of this paper summarizes classical concepts of work, or strain energy, as applied to the analysis of stresses, strains, and deflections under various vehicular load configurations on pavement systems. Controlling equations for strain energy density are presented. When considering strain energy density, strain energy, or work, all components of stresses or strains must be taken into account so that total internal behavior can be evaluated. Previously, pavement thickness design systems have been developed using only a single component of strain, typically at the bottom of the asphaltic concrete layer or at the top of the subgrade. Strain …

Subharmonic Generation By Resonant Three‐Wave Interaction Of Deep‐Water Capillary Waves, Partha P. Banerjee, Adrianus Korpel

Electrical and Computer Engineering Faculty Publications

Subharmonic generation has been observed during the propagation of deep‐water capillary waves. The observations are shown to be in agreement with the theory of degenerate resonant noncollinear three‐wave interaction in a nonlinear, dispersive medium.

Approximate Solutions For Distillation Rating And Operating Problems Using The Smoker Equations, Raymond C. Waggoner, Terry L. Tolliver

Chemical and Biochemical Engineering Faculty Research & Creative Works

Algorithms for rapid solution of implicit variables in the Smoker design equations are presented. The accuracy of these solutions in the context of distillation rating and operating problems Is evaluated for distillation systems where more rigorous physical property assumptions are known to apply. Alternative methods of initially fitting the Smoker equations to rigorous tray-by-tray material and energy balance calculations as well as methods extending the procedure to handle multicomponent systems are discussed. These methods are well suited for many optimization, reliability, and control studies as well as for the fast real-time calculations such as interactive computations or on-line control. © …

H & V News

Building Services Engineering

No abstract provided.