Engineering Commons^™

Apap: The Arithmetic Pipeline Analysis Package, Chang-Chieh Lin

Theses

This study is aimed at the development of an interactive PC-based package for simulating data flow within an arithmetic pipeline in multiprocessor systems. The user constructs the arithmetic pipeline, specifying the functionality of each segment, the intersegment connectivity and pipeline inputs and outputs. After defining reservation tables and data, analysis is performed with the results available in tabular, simple graphic and animated graphic forms.

APAP allows the user to design hardware and analyze its functionality with-out building the circuit, an economical alternative. Even when circuits are to be built, APAP allows the user to correct logic errors before implementation, leaving …

The Quantitative Determination Of Formaldehyde In Ambient Air (Analytical Method), Chitsan Lin

Theses

A procedure for coating in situ silica gel in prepacked cartridges with 2,4-dinitrophenylhvdrazine (DNPH) acidified with hydrochloric acid is described. The method was evaluated under practical field conditions in The Northern New Jersey-Staten Island Urban Air Toxics Project. The formaldehyde hydrazone formed is desorbed by acetonitrile and determined by high-performance liquid chromatography with UV det.ection. In this study, we have examined trap coaz)ng, trap efficiency, parallel ambient air and inaoor air sampLing, to find the best analysis method. Sampling traps aci:iifled .:ith hydrochloric acid perform better than those using percnicric acid or phosphoric acid. Trap sampling efficiency was significantly affected …

An Analysis Of The Second-Order, Type-One Hilbert Phase-Locked Loop, Inn-Shian Lin

Theses

In this thesis, a second-order, type-one PLL ( Phase- Lock, Loop ) in which the usual lead-lag loop filter is paralleled with a Hilbert Transformer (the whole system is called HPLL) is analyzed. A motivation for the study was that earlier researchers have found improved performance if Ilse lead-lag network is paralleled by a differentiator, result mg in the so called ERPIM (Extended-Range Phase-Locked Demodulator). For the purpose of com-parison with earlier experimental and analytical results on the PLL and the ERPLD, the numerical results in this thesis ale based on the parameters of Acampora and Newton.

The basic characteristics …

Simulation Study Of The Multi-H Continuous Phase Modulation, Min-Ling Lin

Theses

Of particular interest in satellite communications are modulation techniques that have a relatively constant envelope and are power and bandwidth efficient. Attempts have been made to satisfy these requirements by using phase and frequency modulation formats. Recently, one approach has been researched which combines the modulation and encoding functions, which is referred to as multi-h continuous phase modulation. Simultaneously good power and bandwidth efficiencies can be achieved at the expense of increased complexity.

This report examines the performance of multi-h continuous phase modulation by a simulation. A multi-h phase coded modulation is generated, passed through the AWGN transmission channel. The …

Gallium Arsenide Standard Cell Cad Database For Digital Design, Nanchou Liu

Theses

This thesis develops a selected design database of gallium arsenide logic cells for automated design. Uniformly applied 1 um gate length physical layout rules are used for the design database with a standard cell design methodology.

Schottky Diode FET Logic (SDFL) technology with double level metallization was selected following a consideration of alternative gallium arsenide MESFET logic types. The SDFL approach is judged to provide improved noise margin, production yield, density, and lower power dissipation.

A cell library with 60 um cell height has been implemented with double entry for each cell input/output. Each cel1 has been simulated with SPICE …

Contrast Sensitivity Measurement Via Evoked Potential, Ken-Gen Lu

Theses

This work is concerned with the use of the visual Evoked Response (VER) to determine Contrast Sensitivity in humans. For this purpose, a system has been developed where signals, obtained from scalp electrodes, and stimulated by visual grating patterns, are recorded digitized and processed on a personal computer (IBM compatible). Processing includes signal averaging and digital filtering. The system provides storage, retrieval and graphic representation of data as well as the capability to transfer data to other computer systems. Data processing includes parameter estimation of suitable signal models, which provide effective data compression of the signal into a finite set …

Asics Application On Voice Processing Interface Design- Qegg Multiplier, Gwo-Jen Luar

Theses

Application Specific Integrated Circuits (ASIC) is a high density VLSI design that including the lower cost, higher performance, small size, and increased reliability. The ASIC, XILINX's LCA is applied on the signal processing ahead of computer I/O interface, specially for the quantitative Electroglottograph. This thesis covers the logic design, simulation test, realization, and stand alone test.

Computer Aided Synthesis Of A Four-Bar Linkage To Generate A Symmetrical Coupler Curve, Shailendra R. Pachalag

Theses

The purpose of this study is to develop a new analytical technique for the synthesis of four-bar mechanisms to generate symmetrical curves with a coupler point passing through 8 points. The geometric expressions involved in kinematic synthesis often tend to offer difficulties such as negative radicals, alternative choices and repetitions. Here a solution procedure has been developed which avoids these difficulties. This solution procedure includes a development of a computer algorithm that should synthesize a crank-rocker type linkage for any given input crank length. This algorithm dismisses all solutions involving negative radicals and lists magnitudes of members so that those …

Design Criteria Of Coherent Optical Fiber Communication System, Rajesh N. Patel

Theses

Design criteria of coherent optical fiber communication system were discussed and investigated. First, the different types of optical fibers (waveguides) were discussed. Then the laser sources, photo-detectors, transmitter & receiver circuits were discussed in detail.

Design criteria of conventional intensity modulated (direct detection) optical fiber communication system were discussed. Then, the design criteria and estimation of number of photons for different modulation schemes for coherent optical fiber communication system were analyzed.

Coherent optical fiber communication system's advantages and drawbacks were discussed in detail. Improvement in receiver sensitivity of coherent detection compare with conventional direct detection was investigated. Finally, some receiver …

An Improved Method Of Gas Chromatographic Determination Of Trace Organic Vapors In Ambient Air Collected In Canisters, Yong-Jin Shen

Theses

An improved method for analysis and quantitation of volatile organic compounds in ambient air has been developed. Samples are collected in evacuated SUMMA polished stainless steel canisters using a sampling flow apparatus with a critical orifice as flowrate controller. Analysis of VOCs in the collected air is carried out by cryogenically concentrating the sample, then thermally transfering it onto the head of a capillary column in a gas chromatograph. The column effluent is measured by a parallel flame ionization detector (FID), and electron capture detector (ECD). The problems associating with quantitative transfer of the sample to the initial cryofocusing loop …

Recycled Plastics As Fillers In Polymer Cement Concrete Composites, Shian-Jong Liu

Theses

How to handle the plastic waste is a big task for the modern society in environmental protection. People already focus on it, especially in PET soft drink bottles. Although PET bottle can be reclaimed, its usages are restricted due to the limitation in color and difficulty in purification.

On the other side, concrete is the most common material for human beings to used [sic] in construction. Concrete has good compressive strength, but poor [sic] in flexural and tensile strengths, which limits its applications. So, scientists try to improve its properties by adding the polymer into the conventional concrete, to enhance …

Sorptive And Geotechnical Characteristics Of Kaolinite, Chi-Yuan Shih

Theses

The sorption/desorption behavior of phenol and chlorobenzene as well as their influence on geotechnical characteristics of kaolinite were studied. The results reveal that the sorption process follows closely with the Freundlich adsorption isotherm whereas the sorption/desorption ratio depends upon the characteristics of organic compounds.

A series of geotechnical properties tests was also undertaken after achieving equilibrium at different concentrations of organic compounds. It was found that the parameters such as liquid limit, plastic limit, optimum moisture content, and dry density increase with an increasing-concentration of organic compounds.

The relationship between the geotechnical, properties and sorption behavior of soils provides the …

Softening Response Of Concrete In Direct Tension, Teresa Cintora

Theses

Due to the increased attention in nonlinear fracture mechanics and numerical methods of cementitious material, it has become necessary to have a reliable investigation of the post-peak softening response of concrete under direct uniaxial loading. But due to the brittleness of the material previous researchers have encountered great difficulty in obtaining complete data regarding the load-deformation behavior. This study uses a strain-controlled testing method and therefore the post-peak curve can be more easily obtained. Based on these results a unique formula for the normalized load vs. deformation curve has been proposed to be applied in fracture analysis applications.

On Conventional And Harmonic Load Flow Analysis, Ranjit B. Pradhan

Theses

In conventional power flow analysis, simultaneous linear equations numbering in thousands must be solved repeatedly and in many instances on-line. Luckily the matrix of coefficients of these equations is sparse with a few elements in each row. Therefore for a faster solution and to save computer memory, sparsity must be exploited and an optimal ordering of the equations must be sought. When considering harmonics, the number of the simultaneous equations to be solved is multiplied and therefore, considering sparsity and optimal ordering is doubly important.

In this thesis a software package for optimizing computation time and memory requirements through exploitation …

System Performance Criteria In Cdma Networks Using Gold Codes, Yong H. Kim

Theses

First, we have presented the autocorrelation and crosscorrelation properties for periodic and aperiodic binary sequences. The generation of binary sequences using shift registers with feedback was reviewed. We have also included correlation properties for the Gold codes.

Next, we discussed Gold code generation for the balanced and unbalanced Gold codes.

Thirdly, we investigated the number of simultaneous users in a CDMA system using Gold codes for the worst case and the average case of mutual interference.

Finally, we simulated the probability of interference exceeding a threshold value, and the average crosscorrelation value caused by interference in a CDMA network which …

Modeling And Simulation Of Robot Arms With Flexible Links, John G. Danis

Theses

The design of lightweight robot arms introduces a degree of flexiblity in the individual links which renders the arm difficult to control. Solution of the control problem requires accurate and detailed mathematical models of the arm dynamics. A comprehensive survey of the current literature in this area has shown that although many such models exist, there is a great diversity in their structure, function, and applicability. The different objectives and techniques of model development which lead to this diversity are examined and summarized in this thesis. Bases for classification of the mathematical models and techniques of development are established, and …

An Analysis Of The Dense Packing Of Disks : A Computer Simulated Approach, Jir-Yih Tsaur

Theses

This thesis is concerned with the analysis of dense packing of hard disks. The Voronoi diagram and the geometric neighbours were first computed. The average number of geometric neighbours of a disk is six. It is thus more efficient to choose structural neighbours from among the geometric neighbours than from among all other disks.

Through the Monte Carlo simulation by Rosato et. al., disk configurations after pouring and subsequent shaking were provided for analysis. The mean number of geometric neighbours and the average coordination number were computed. The angular distribution of the structural neighbours was discussed. The packing fraction increases …

An Investigation Of Electrical And Optical Properties Of Reactively Sputtered Silicon Nitride And Amorphous Hydrogenated Silicon Thin Films, Tae Hoon Kim

Theses

Thin films of silicon nitride and amorphous hydrogenated silicon were prepared by radio frequency reactive sputter deposition and their properties optimized for their use as low temperature passivation coatings for optoelectronic devices. The effect of various sputter deposition parameters on the conduction and optical properties were studied. Infrared spectrophotometry and ellipsometry were used to determined the optical properties of the films whereas the electrical properties were determined from current-voltage measurements of MIS capacitors.

Typical parameters of a sputter deposition run for the best Si₃N₄ films were: base pressure, 1-2x10^-6 torr; sputtering pressure, 5 mtorr; nitrogen partial …

Use Of Recirculation Reactor To Study Biodegradation Of 2-Chlorophenol, Kai-Chung Yang

Theses

The performance of immobilized cells in the treatment of hazardous waste was investigated using a recirculation flow reactor run in a batch mode. A mixed microbial population from a municipal wastewater treatment plant was immobilized in calcium alginate gel. The bio-oxidation ability of these microbes towards a model toxin (2-chlorophenol) was studied. The process parameters studied were as follows:

1. Flow rate of the recycle stream;
2. Biomass loading;
3. Spiking concentration of 2-chlorophenol;
4. Use of buffered vs. non-buffered defined medium.

Dissolved oxygen concentration was monitored using a flow Clark-type dissolved oxygen probe. Oxygen consumption was correlated with the biodegradation of 2-chlorophenol. Physical …

Investigation Of Forces In The Course Of The Water Jet--Work Piece Interaction, Hung-Yuan Li

Theses

This study is concerned with the dynamic of the interaction between the water jet and the work-piece. The piezoelectric transducer was used to construct an experimental setup. The simultaneous use of the constructed setup and strain gage enables us to validate the experimental procedure. The forces in the impingment zone were measured at different operational conditions. Totally about 400 different combinations of these conditions were tested. It was found that the force is mainly determined by the diameter of the sapphire. The effects of the abrasive size , abrasive flow rate, the diameter of the carbide tube, and the stand-off …

Design And Development Of An Infrared Ccd Camera, John Frederick Romanowich

Theses

An infrared CCD camera system was designed and developed for operating various sizes of Schottky-barrier IR-CCD image sensor chips. The camera has a digitally programmable frequency synthesizer for operating the 160 X 244, 320 X 244, and 256 X 256 image sensors developed at the David Sarnoff Research Center. The electronics of the camera are designed to provide the outputs required for operating a XYZ monitor, a standard TV monitor, or a computer workstation. At the core of the camera design is a RS-170 standard sync generator that supplies the waveforms for synchronizing the camera's circuitry to produce a composite …

Design And Construction Of A Thermoelectric Calorimeter To Measure Thermal Resistance Of Building Components, Ravindra Samtaney

Theses

The steady-state thermal resistance of a building wall is an important parameter in determining its thermal performance. In-situ measurement of thermal resistance is the only unambiguous way of determining thermal resistance since the actual value may significantly differ from the laboratory or the calculated R-value.

Hitherto, the in-situ measurement of thermal resistance has been largely confined to the winter season. A thermoelectric calorimeter was designed, constructed and tested in order to provide measurements of thermal resistance during the summer as well as the winter season.

This thermoelectric calorimeter is a rectangular box, insulated on five sides and covered with an …

An Investigation Of Electrical And Physical Properties Of Reactively, Diode Sputtered Silicon Nitride Thin Films, Divyang Manharlal Shah

Theses

Silicon nitride thin films were deposited by r.f. reactive sputtering of silicon in nitrogen and argon discharge. Biased and unbiased modes of diode mode sputtering were used. Typical parameters for a sputter deposition run were: base pressure, 1-2x10-6 torr; sputtering pressure, 5-7 mtorr; nitrogen partial pressure, 15-16%; cathode-anode gap, 4 inch; r.f. power, 200-250 watts; cathode voltage, 1.8-2.1 V r.f.; water vapor pressure, 20-30% of the base pressure. The film thickness and the refractive index were measured by ellipsometery. The films of thickness 300-2500A, refractive index 1.9-2.1 and resistivity 10101Ω — cm were obtained. The deposition rate was in the …

Design Of An Experimental Apparatus To Measure The Charge And Mass Of Ionized Species In A Partially Ionized Cluster Beam Deposition System, Nitin K. Shah

Theses

The objective of this research was the design and construction of an experimental apparatus to investigate the size distribution of gallium clusters that can be emitted from a heated crucible with a 1 mm nozzle. This research work involved the design and construction of a partially ionized cluster beam (PICB) deposition system which would provide low charged particle background for retarding field analysis and cluster size measurements. The apparatus also allowed control of critical parameters on which the cluster size may depend.

The promise of PICB is based on the formation of clusters of adatoms, their ionization and their acceleration …

Seizure And Wear Testing Methodology, I-Tsung Shih

Theses

In this work the seizure as an adhesive wear has been discussed and analyzed The diffusion hypotheses is accepted as the seizure mechanism. It was determined that the surface of machine components, material properties, and contact stresses in sliding and loading zone are responsible for the wear.

A computer controlled wear testing methodology has been developed and a wear testing machine has been designed and assembled. The tests for the selected gray cast non and alloy steel specimens with different surface treatment were performed on the designed wear testing machine.

The test results showed that the selected materials with additional …

Investigation Of High Shear-Rate Viscoelastic Flow, Sudarshan S. Sood

Theses

The object of this study is to understand two important characteristics exhibited by viscoelastic fluids at high shear-rates, and analyse their influence on practical applications Viscoelastic fluids, such as polymer solutions, when subjected to high shear stress, behave in a manner which has not been sufficiently analytically explained In experimental studies, such fluids have shown.

(a) Stress relaxation.

(b) Decrease of viscosity with an increase in shear rate.

(c) Slight decrease of viscosity with temperature.

(d) Normal stress differences in shear flow.

In this thesis an analytical explanation is given for two (a and b ) of these features This …

Friedman's Model Of Calculating The Optimum Bid Price Using Dbase Iii Plus, Selim Uzel

Theses

The micro-computer program, BIDCALC presented in this thesis is offered as simple, practical, and proven approach to developing an effective data-based competitive bidding strategy. BIDCALC is written in dBASE III Plus programming language for MS-DOS based computers.

Main purpose of the program is to evaluate the optimum bid using the Friedman's model of Maximizing the Expected Profit. At the same time the program keeps track of necessary competitor and project information in data base files which are easily transferable to other software packages. The program is capable of generating a variety of reports in a matter of seconds.

BIDCALC is …

Investigation Of The Characteristics Of The Kerf And The Surface Generated In The Course Of Cutting Titanium With Abrasive Waterjets, Ajay Vora

Theses

The effect of cutting parameters on the quality of cut in the course of cutting Titanium (Gr.2) with Abrasive Waterjet is investigated. The cutting parameters include nozzle traverse rate, size and feed rate of abrasives and nozzle(s) diameter. The width of kerf (top and bottom ), taper and roughness is studied. The measurements are tabulated and plots are made to study the trend and relationship for each set of parameters.

The qualitative conclusions are made successfully but no quantitative relationship was derived. Suggestions are made for the evaluation of technology for feasibility and economic justification, and to achieve desired cutting …

Attenuation Properties Of An Lp 11 Mode In A W-Type Fiber Operating Below Cutoff, Chih-Chiang Wang

Theses

Rigorous formulation of a W-type fiber for its dispersion properties is presented. An LP mode has been studies extensively with respect to its attenuation properties when the frequency of operation is kept below cut-off. Due to rigorous dispersion equation numerical difficulties encountered in the computations, an approximate dispersion equation corresponding to weakly guided modes is solved. Numerical results corresponding to attenuation and propagation characteristics of the W-type fiber for radii and refractive index variations are presented. A computational subroutine for radial functions (Bessel, etc ) for complex argument has been used and proved to be useful in the legion of …

Schema Based Wiring Tool : A Computer Network And Cad Design System, Jia Jing Zhang

Theses

For the purpose of building a SBC-8052-Basic micro-controller based instrument system, a new SCHEMA II Computer Aided Design system for IBM-PC is used to enhance circuits design routine, and it is described here. The new features of this CAD are discussed, and the design example of a new version of the SBC-8052-Basic micro-controller is given here in detail.

Since the wiring board system is adopted as tool of the laboratory development and controlled by the QL microcomputer, and since SCHEMA II CAD, on the other hand, is used on the IBM-PC-AT, communication between the two microcomputers is accomplished, and the …