Engineering Commons^™

Automation Of Part Inspection In A Coordinate Measuring Machine, Madhu N. Kanoor

Theses

Some of the drawbacks in inspecting a part using a Direct Computer Controlled Coordinate Measuring Machine are that a programmer has to generate a part program for the inspection process, and such programs have to be generated for each part to be inspected. These programs will be restricted to a kind of CMM, thus preventing the portability of the program t o other kinds of CMM.

If a part program can be generated off line after a part has been designed in a CAD system. an operator can inspect the part without any prior knowledge of the esoteric CMM programming …

Design Optimization Of Laminated Fiber Composites, Ramarao G. Prasad

Theses

Laminated Fiber Composites are finding a wide range of applications in structural design especially for light weight structures that have stringent stiffness and strength requirements Finding an efficient composite structural design that meets the requirements of a certain application can be achieved not only by sizing the cross-sectional areas and member thicknesses but also by global or local tailoring of the material properties through selective use of orientation, number and stacking sequence of the laminae that make up the composite laminate.

The work presented here treats the design optimization problem involving minimum weight design of fiber composite laminates subject to …

Development Of Technology For Glass Shaping By The Use Of Abrasive Water-Jet, Li-Yuan Shih

Theses

This study is to investigate the effects of AWJ properties on the results of glass machining and to develop a practical procedure for prediction of these results of abrasive waterjet (AWJ) machining. The use of glass in engineering and Abrasive Waterjet Cutting Technology are introduced. A practical technique to prevent defects and to improve the quality of the glass surface is suggested. A earlier parameter introduced, Exergy Distribution Density (EDD), is used in order to characterize the cutting conditions.

It was found that besides of EDD the results of machining are affected by the particles' destruction in the course of …

Biodegradation Of Phenol And 4-Chlorophenol Using A Single Species In A Sequencing Batch Reactor, Kung-Wei Wang

Theses

Biodegradation of phenol and 4-chlorophenol (4CP) using Pseudomonas putida (ATCC 17514) was studied in batch and sequencing batch reactors. Batch experiments were first performed in order to reveal the kinetics of biodegradation for each substrate. 4-Chlorophenol was degradable only in the presence of phenol, or immediately after exposure of the organism to phenol. It was postulated that an enzyme induced by the presence of phenol was necessary to initiate degradation of 4-chlorophenol.

A mathematical model was then developed to describe the dynamic behavior of both substrates in a sequencing batch reactor (SBR). The model utilized rate parameters obtained from batch …

Direct Recovering Of Surface Structure Characterized By An Nth Degree Polynomial Equation Using The Uoff Approach, Mazen A. Salhi

Theses

There are two different approaches for estimation of structure and/or motion of objects in the computer vision community today. One is the feature correspondence method, and the other is the optical flow method [1]. There are many difficulties and limitations encountered with the feature correspondence method, while the optical flow method is more feasible, but requires a substantial amount of extra calculations if the optical flow is to be computed as an intermediate step.

Direct methods have been developed [2-4], that use the optical flow approach, but avoid computing the full optical flow field as an intermediate step for recovering …

Broadband Isdn Control Using Neural Networks, Stavros Zervoudakis

Theses

Broadband Integrated Services Digital Networks (B-ISDN) are considered to become the standard communications networks in the near future. Major research efford is being applied in determining the appropriate mode of operation for B-ISDN systems. Two proposals, the Synchronous Transfer Mode (STM) and the Asynchronous Transfer Mode (ATM) claim to best fit the B-ISDN transmission requirements individually. A new method for B-ISDN traffic control is proposed in this paper. This method assigns priority levels to incoming traffic while integrating STM with ATM. A neural network is used to decide how the multiplexing of the incoming packets will be performed. Several traffic …

Delay Performance Of Cebus And Modified Cebus Schemes, Altaf Hussain

Theses

In this thesis the performance of the CEBUS (Consumer Electronics Bus), a local area network proposed by the Electronics Industries Association for the 'Smart House,' is analyzed under varying network load and traffic patterns that would occur in a typical home environment. Reduced complexity versions of the CEBUS scheme are compared with the standard CEBUS scheme.

It was found from simulation analysis that the delay in the CEBUS network, at a given network bandwidth, is dependent upon the message priority and the traffic pattern in the network. It was also observed that the performance of a modified CEBUS scheme was …

1991 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 7, Number 7, October 1991, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Bulletin - Fall, 1991, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

An eight page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Acuta Enews October 1991, Vol. 20, No. 10

ACUTA Newsletters

In This Issue

President's message

Wireless alternative to cable

AT&T donates computers

ACUTA budget for 1991-92

Voice messaging is "hit"

Publications Editor profiled

Santa Clara Magazine, Volume 34 Number 1, Fall 1991, Santa Clara University

Santa Clara Magazine

12 - FROM SLAVERY TO SAINTHOOD? With the impending canonization of Pierre Toussaint, many feel the Church is finally beginning to recognize the contributions of its African-American worshippers. By Kathy Daile-Molle '85

18 - AND THEY SAID IT WOULDN'T LAST 4-Remembering Dave 2 Letters to the Editor 4 Santa Clara Today 10 Santa Clara Sports 32 Alumni Class Notes 42 University Calendar Tales of freshman roommates who beat the odds and stayed friends. By Kathryn Bold '81

22 - HISPANIC CALIFORNIANS AND CATHOLIC HIGHER EDUCATION The second of a two-part article featuring the diaries of a Hispanic student who attended …

The Calendar - October 1991, Nova University

The Calendar

No abstract provided.

Ole Miss Engineer 1991

Ole Miss Engineer

No abstract provided.

A Conservation Tillage Educational Program, Elbert C. Dickey, Paul J. Jasa, David P. Shelton

Department of Agricultural and Biological Systems Engineering: Faculty Publications

An educational program was conducted to enhance the adoption of conservation tillage practices in targeted areas to reduce soil erosion and on-farm fuel use. Traditional extension methods such as meetings, field days, demonstrations, and plots were used extensively. In addition, the following nontraditional educational methods were used to achieve project objectives: targeting high priority areas, local program guidance committees, surveys to evaluate perceptions and use of conservation tillage, employment of extension assistants to work in the target areas, use of a rainfall simulator to demonstrate the effectiveness of residue cover in reducing erosion, and small group or "coffee shop" meetings …

Area Conservation Tillage Meetings-A Successful Educational Program, Elbert C. Dickey, Paul J. Jasa, David P. Shelton, Robert Grisso, Keith Glewen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Interest in conservation tillage began to increase in the early 1980s, and farmers wanted information on how to adopt and manage various tillage and planting systems. Area conservation tillage meetings were developed by the University of Nebraska Cooperative Extension to provide the needed information on a regional basis. Local extension agents and Soil Conservation Service personnel helped extension specialists determine program content. The multidisciplinary meetings included farmer presentations and allowed space and time for commercial exhibits. About 80% of respondents to meeting evaluations indicated they planned to change their tillage practices as a result of the information presented.

Dna Mapping Algorithms: Clone Sequencing, Judith H. Lewis, Will Gillett

All Computer Science and Engineering Research

The DNA restriction mapping problem can be abstracted to the Shortest Common Matching String problem by viewing the restriction fragment lengths as symbols and the clones as bags. The Shortest Common Matching String problem can be decomposed into the Bag Sequencing problem and the Symbol Sequencing problem. All three of these problems have bene shown to be NP-hard. Rhee has proposed a family of greedy algorithms to compute polynomial time approximations to the Bag Sequencing problem, which produced surprisingly good performance results on abstracted data. In the test data generated by Rhee for pragmatic analysis, the symbols in bags represented …

Center For Computer And Information Sciences Master Of Science In Computer Computer Science Fall Courses 1991, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Instrumentation And Control For A Microprocessor-Based Coronary Perfusion System, Daniel L. Priester

Master's Theses (1922-2009) Access restricted to Marquette Campus

No abstract provided.

Flexural Behavior Of Web Elements With Openings, Roger A. Laboube, Wei-Wen Yu, Ming-Yang Shan, K. D. Batson

CCFSS Library (1939 - present)

INTRODUCTION The purpose of this research project has been to investigate the flexural behavior of C-shaped members with web openings. Three common industry standard C-sections have been studied as summarized in the First and Second Progress Reports. To date two testing sequences have been completed. Test sequence No.1 investigated sections with web openings fabricated from nominally low yield strength material. Test sequence No.2 examined sections both with and without web openings. Specimens in test sequence No. 2 have nominally higher yield strengths. This report summarizes the test procedure and results of the research to date.

Finite Element Frequency Domain Solution Of Nonlinear Panel Flutter With Temperature Effects And Fatigue Life Analysis, David Yongxiang Xue

Mechanical & Aerospace Engineering Theses & Dissertations

A frequency domain solution method for nonlinear panel flutter with thermal effects using a consistent finite element formulation has been developed. The von Karman nonlinear strain-displacement relation is used to account for large deflections, the quasi-steady first-order piston theory is employed for aerodynamic loading and the quasi-steady thermal stress theory is applied for the thermal stresses with a given change of the temperature distribution, ΔΤ (x, y, z). The equation of motion under a combined thermal-aerodynamic loading can be mathematically separated into two equations and then solved in sequence: (1) thermal-aerodynamic postbuckling and (2) limit-cycle oscillation. The Newton-Raphson iteration technique …

Thermal Characterization Of Carbon Monoxide Oxidation Catalysts Using Thermogravimetric Analysts And Differential Scanning Calorimetry, Rene A. Bartgis

Chemistry & Biochemistry Theses & Dissertations

Catalysts composed of platinum and/or palladium on tin (IV) oxide supports, with and without silica gel, as well as catalysts composed of gold on manganese oxide, have been developed for the recombination of carbon monoxide and oxygen to form carbon dioxide for use in carbon dioxide lasers. A thermogravimetric method and a differential scanning calorimetric method have been developed for the thermal characterization of these catalysts. The mass loss data and the enthalpy changes determined as the catalysts lost water were then related to existing activity data for these catalysts. No relationship was found between the thermal data and the …

Study Of Cathodoluminescence In Semiconductors, Mandakini V. Kale

Electrical & Computer Engineering Theses & Dissertations

Cathodoluminescence in Zn doped GaAs and ZnSe, the materials of interest for electron-beam controlled semiconductor switches, has been investigated. A new diagnostic technique, using telescopic setup of lenses, was developed to study the spatially resolved cathodoluminescence. The setup eliminated the light, other than rays from the sample, parallel to the optical axis, resulting in an enhanced spatial resolution. At high e-beam energies, light was detected, from the Zn layer region in the GaAs. It is proposed to be due to the radiative recombination of electron-hole pairs, created by the e-beam. For the polycrystalline ZnSe no light emission was detected. This …

Experimental Study Of Transition In A Supersonic Free Shear Layer, Rudolph A. King

Mechanical & Aerospace Engineering Theses & Dissertations

The transition behavior of a free shear layer above a cavity with high and low levels of freestream acoustic disturbances has been investigated at Mach 3.5 in the Supersonic Low-Disturbance Pilot Tunnel located at NASA Langley Research Center. Schlieren photography, mean pitot pressure data, and hot-wire surveys were used to detect transition locations. The transition Reynolds numbers obtained were between Re_Tr = 3.6 x 10⁵ and 5.3 x 10⁵ in good agreement with conventional ("noisy") wind tunnel results. The study indicated that the effects of a decrease in freestream noise on Re_Tr were minimal but, as …

An Experimental Investigation Of Composite Sensors For Crack Length Measurement, Manickam Ramasamy

Mechanical & Aerospace Engineering Theses & Dissertations

Structural defects such as cracks can cause catastrophic failure in engineering components or structures. There are many techniques to measure the crack growth in materials and are commercially available. In this thesis, bondable crack length measurement gages have been investigated and these gages give electrical signal as the output and measure the crack length continuously. Silver paint, nickel powder impregnated epoxy and carbon powder impregnated polymer composite gages are investigated and tests are conducted by resistance measurement method with simple instrumentation and by potential drop method with a constant current output source. Rectangular shape gages have been investigated and as …

Value Of Research, Kentucky Transportation Center

Kentucky Transportation Center Research Report

Transportation research in Kentucky has been ongoing since 1914. The Road Materials Testing Laboratory was established that year at the University of Kentucky. Operation of the laboratory commenced in 1915 under the guidance of Professor D.V. Terrell who later became Dean of the College of Engineering. Dean Terrell often noted that the purpose of research was not to save money but to make it go farther. Public funding was never sufficient to accomplish all that various agency personnel considered essential nor that which the public deemed necessary and research was conducted most often for the purpose of gaining more for …

Bs News

Building Services Engineering

No abstract provided.

Evaluation Of Pe Film, James E. Funk, Theodore Hopwood Ii, Christopher M. Oberst

Kentucky Transportation Center Research Report

Laboratory tests were conducted to assess the ability of a 3-mil thick adhesive-backed polyethylene film (Polymask) to protect vehicle paint finishes from acid-rain damage. The laboratory tests employed conditions known to be relevant to actual service conditions including: 1) automotive paints of various colors, 2) simulated acid-rain solutions (of pH values from 2.2 to 5.5), and 3) service temperatures (120 to 160 °F). Laboratory tests included cyclic evaporation and soak tests similar to those employed in a previous series of tests for Toyota (1). Cyclic evaporation tests were performed for 12 cycles and the soak tests were performed for 5 …

Linearized Dynamics Of Space Structures With Articulated Appendages, Gopichand Koganti

Mechanical & Aerospace Engineering Theses & Dissertations

The inherent difficulties of the conventional spacecraft design, which first considered the optimization with respect to structural variables and then with respect to control variables, have led to the concept of Controls-Structures Interactive Design. The success of the CSI design of Space structures without articulated appendages has prompted the extension of the CSI design to systems with articulated appendages. The presentation is of two parts, the first part deals with the derivations of the equations of motion and the second part deals with the eigenvalue/vector approximations.

Three approaches, namely: the multibody approach, the finite element based approach with hinge joints …

Domain Limitations And Interface Requirements For Expert Developed Knowledge Based Systems, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

The expanded use of graphical, case-based and object oriented techniques in expert systems creation has made it more practical for domain experts to develop their own applications. This thesis focuses on the elements necessary in an expert/developer interface and looks at various forms and techniques that exemplify such an approach. The spreadsheet metaphor is used for an interface or managed set of interfaces that a domain expert can use in building his own expert system or prototype. criteria are established for such interfaces and recent commercial offerings that make expert-created knowledge-bases more practical are reviewed for techniques that qualify. Approaches …