Engineering Commons^™

A Fast Converging, Low Complexity Adaptive Filtering Algorithm, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a new adaptive filtering algorithm called fast affine projections (FAP). Its main attributes include RLS (recursive least squares) like convergence and tracking with NLMS (normalized least mean squares) like complexity. This mix of complexity and performance is similar to the recently introduced fast Newton transversal filter (FNTF) algorithm. While FAP shares some similar properties with FNTF it is derived from a different perspective, namely the generalization of the affine projection interpretation of NLMS. FAP relies on a sliding windowed fast RLS (FRLS) algorithm to generate forward and backward prediction vectors and expected prediction error energies. Since sliding …

Superheating Of Bi(0001), E. A. Murphy, H. E. Elsayed-Ali, J. W. Herman

Electrical & Computer Engineering Faculty Publications

Superheating of Bi(0001) by about 90 K above the bulk melting temperature is observed using time-resolved reflection high-energy electron diffraction with ∼200-ps time resolution. Larger temperature excursions above the bulk melting temperature result in melting accompanied by irreversible laser damage to the surface. The rhombohedral structure of Bi leads to very different behavior of material parameters upon melting as compared with fcc metals. Therefore, our observation of the superheating of Bi(0001), together with the previously observed superheating of Pb(111), suggests the generality of the superheating phenomenon.

Direct Measurements Of The Transport Of Nonequilibrium Electrons In Gold Films With Different Crystal Structures, T. Juhasz, H. E. Elsayed-Ali, G. O. Smith, C. Suárez, W. E. Bron

Electrical & Computer Engineering Faculty Publications

The transport of femtosecond-laser-excited nonequilibrium electrons across polycrystalline and single-crystalline gold films has been investigated through time-of-flight measurements. The thicknesses of the films range from 25 to 400 nm. Ballistic electrons as well as electrons interacting with other electrons and/or with the lattice have been observed. The ballistic component dominates the transport in the thinner films, whereas the interactive transport mechanism is dominant at the upper end of the thickness range. A slower effective velocity of the interactive component is observed in the polycrystalline samples, and is assumed to arise from the presence of grain boundaries. The reflection coefficient of …

Design And Implementation Of Fuzzy Logic Controllers. Thesis Final Report, 27 July 1992 - 1 January 1993, Osama A. Abihana, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

The main objectives of our research are to present a self-contained overview of fuzzy sets and fuzzy logic, develop a methodology for control system design using fuzzy logic controllers, and to design and implement a fuzzy logic controller for a real system. We first present the fundamental concepts of fuzzy sets and fuzzy logic. Fuzzy sets and basic fuzzy operations are defined. In addition, for control systems, it is important to understand the concepts of linguistic values, term sets, fuzzy rule base, inference methods, and defuzzification methods. Second, we introduce a four-step fuzzy logic control system design procedure. The design …

Mathematical Modeling Of The Formation Of Calcareous Deposits On Cathodically Protected Steel In Seawater, J. F. Yan, T. V. Nguyen, Ralph E. White, R. B. Griffin

Faculty Publications

A first principle mathematical model of the formation of calcareous deposits on a cathodically protected steel rotatingdisk electrode in seawater is presented. The model includes equations which transport phenomena, electrochemical reactions,precipitation reactions, and a homogeneous reaction involved in the formation of calcareous deposits on an electrodesurface. Predicted concentration profiles show that a high concentration of OH^– ions on the electrode surface leads to the formation of calcareous deposits. The calcareous deposits contain mostly CaCO₃, but the initial deposits are predicted to contain more Mg(OH)₂ than CaCO₃. The predicted calcareous deposits on the electrode surface …

Parametric Studies Of The Formation Of Calcareous Deposits On Cathodically Protected Steel In Seawater, J. F. Yan, Ralph E. White, R. B. Griffin

Faculty Publications

A first principle mathematical model has been used to study the effects of ocean environment and cathodic protection on the formation of calcareous deposits and their ability to reduce the cathodic current density. These parameters include applied potential, rotation speed, temperature, salinity, and depth. The results showed the applied potential strongly influences the formation of calcareous deposits and their ability to reduce the cathodic current density. Among the environmental factors, rotation speed has the most influence on the cathodic current density. Salinity slightly influences the cathodic current density over the range of interest. Temperature is much more influential than salinity …

Thermal Analysis Of Spirally Wound Li/Bcx And Li/Socl2 Cells, E. E. Kalu, Ralph E. White

Faculty Publications

A thermal analysis of Li/BCX and high rate Li/SOCl₂ cells is presented. The thermal model developed was used to study the effect of ambient temperature of discharge (0–40°C) on Li/BCX cells discharged at the same rate. The model predictions show that ambient temperature of discharge was critical in thermal management of the cell. For forced convection cooled cells, the model predicted that ambient temperature near room temperature (25°C) was required to achieve the lowest maximum temperature rise in the cell. Inclusion of the effects of reaction products to the model predictions showed that a constant composition assumption may be …

Galvanostatic Pulse And Pulse Reverse Plating Of Nickel-Iron Alloys From Electrolytes Containing Organic Compounds On A Rotating Disk Electrode, Branko N. Popov, Ken-Ming Yin, Ralph E. White

Faculty Publications

Linear sweep voltammetry, galvanostatic pulse, and pulse reverse techniques were used to study the plating of nickel-iron alloys in the presence of organic additives. The effects of pulse current densities, i_p, reverse current densities, i_r, rotation speed of disk electrode, and the presence of organic additives on deposition of nickel-iron alloys are evaluated. The observed phenomena can be explained by the concentration depletion of reactants (or products), and the surface coverage of the additives on the electrode. A new formulation of the plating bath is defined.

A Water And Heat Management Model For Proton-Exchange-Membrane Fuel Cells, Trung V. Nguyen, Ralph E. White

Faculty Publications

Proper water and heat management are essential for obtaining high-power-density performance at high energy efficiency for proton-exchange-membrane fuel cells. A water and heat management model was developed and used to investigate the effectiveness of various humidification designs. The model accounts for water transport across the membrane by electro-osmosis and diffusion, heat transfer from the solid phase to the gas phase and latent heat associated with water evaporation and condensation in the flow channels. Results from the model showed that at high current densities (> 1 A/cm²) ohmic loss in the membrane accounts for a large fraction of the …

Thermally Activated Reversible Threshold Shifts In Yba2Cu3O7-Δ/Yttria-Stabilized Zirconia/Si Capacitors, Jianmin Qiao, Eric M. Ajimine, Paresh P. Patel, Geoffrey L. Giese, Cary Y. Yang

Electrical and Computer Engineering

Yba₂Cu₃O_7-δ/yttria‐stabilized zirconia (YSZ)/silicon superconductor–insulator–semiconductor capacitors are characterized with capacitance‐voltage (C‐V) measurements at different gate‐voltage sweep rates and under bias‐temperature cycling. It is shown that ionic conduction in YSZ causes both hysteresis and stretch‐out in room‐temperature C‐V curves. A thermally activated process with an activation energy of about 39 meV in YSZ and/or at YSZ/Si interface is attributed to trapping/detrapping mechanisms in the SiO_x interfacial layer between YSZ and Si. The negative mobile ions in YSZ can be moved by an applied electric field at room temperature and then ‘‘frozen’’ with decreasing temperature, giving …

Nanosecond Transient Electroluminescene From Polymer Light-Emitting Diodes, David Braun, D. Moses, C. Zhang, A. J. Heeger

Electrical Engineering

The transient electroluminescence from polymer light-emitting diodes is reported. When the devices are mounted on a microstrip transmission line, the temporal response is limited by the electrode geometry, with rise and fall times below 50 ns. With low duty-cycle pulses (0.5%) the electroluminescence intensity remains proportional to the current at values up to 10 A/cm², two orders of magnitude greater than possible under direct current operation. Since the spectral blue-shift observed at high current levels (with power dissipation above 1 W/cm²) indicates significant sample heating, still higher levels should be possible with proper thermal management.

Free-Radical Retrograde Precipitation-Polymerization Process, Gerard T. Caneba

Michigan Tech Patents

A free-radical retrograde polymerization process for forming a polymer. An admixture of reactants including predetermined amounts of a monomer, a solvent, and a free-radical-initiator is reacted. A precipitation polymerization reaction occurs such that a polymer-rich phase is at a temperature generally above the lower critical solution temperature (LCST) of the admixture.

Fuzzy Logic Applied To Adaptive Kalman Filtering, Marlys Rae Remus

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The Kalman filter provides an effective means of estimating the state of a system from noisy measurements given that the system parameters are completely specified. The innovations sequence for a properly specified Kalman filter will be a zero-mean white noise process. However, when the system parameters change with time the Kalman filter will need to be adapted to compensate for the changes. Traditionally this has been accomplished by using nonlinear filtering, parallel Kalman filtering and covariance matching techniques. These methods have produced good results at the expense of large amounts of computational time. Necessary changes in the system parameters become …

Turbomachine Stability And Forced Response Prediction, Leland Bert Clark

Open Access Theses

A mathematical model is developed and utilized to analyze turbomachine cascade flutter and forced response. The flutter boundary, defined as the largest value of reduced frequency at which flutter occurs for a given cascade, was evaluated for single degree of freedom torsional oscillation as well as coupled bending and torsional oscillations. The maximum amplitude of forced response in bending and torsion was also considered. The unsteady aerodynamic lift and moment coefficients were determined from unsteady aerodynamic flow models for subsonic flow, supersonic flow with a subsonic axial component and supersonic axial flow. The effect of changing the Mach number, stagger …

Method Of Predicting Cut-Time Of Milk Coagulum In Cheese-Making Process, Frederick A. Payne, Clair L. Hicks

Biosystems and Agricultural Engineering Faculty Patents

An apparatus for predicting milk coagulum cut-time in a cheese making process includes a light source, a sensor or detector for sensing diffuse reflectance of light from said milk and a controller for analyzing the diffuse reflectance and accurately predicting the cut-time to significantly enhance overall yield. More specifically, the apparatus includes an optical probe which may be suspended over the milk or attached to a wall of a fermentation vessel in which the milk is contained. A method for predicting milk coagulum cut-time includes the steps of (a) directing light from a light source toward milk undergoing enzymatic hydrolysis; …

High-Level Expression Of A Heterologous Protein In The Milk Of Transgenic Swine Using The Cdna Encoding Human Protein C, William H. Velander, John L. Johnson, Raymond L. Page, Christopher G. Russell, Anuradha Subramanian, Tracy D. Wilkins, Francis C. Gwazdauskas, Christoph Pittius, William N. Drohan

William H. Velander Publications

Transgenic pigs were generated that produced human protein C in their milk at up to 1 g/liter. The gene construct was a fusion gene consisting of the cDNA for human protein C inserted into the first exon of the mouse whey acidic protein gene. These results demonstrate that the mouse whey acidic protein gene contains regulatory elements that can direct cDNA expression at high levels in the pig mammary gland. Recombinant human protein C that was produced at about 380 pg/ml per hr in transgenic pig milk possessed anticoagulant activity that was equivalent to that of protein C derived from …

A Computational Algorithm For Squaring-Up, Part I: Zero Input-Output Matrix, Pradeep Misra

Electrical Engineering Faculty Publications

In this paper, some preliminary results on the problem of squaring-up a non-square linear multivariable system are presented. It. is shown that. for the case considered here. the squaring-up problem can be transformed into a state feedback problem. An illustrative numerical example is included to illustrate the results developed.

The Implementation Of Photovoltaic Transportation Devices, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

The Florida Solar Energy Center (FSEC) and the Florida Department of Transportation (FDOT) are currently involved in a program to implement solar electric (photovoltaic) powered applications in the transportation sector. The objective of the program is to encourage the widespread use of cost-effective, transportation related, photovoltaic-powered systems in all areas of traffic control.

Transportation departments have generally relied on conventional practices of using generators, primary batteries, and extensions of utility grid to fulfil their power needs. There exist many remote and conventional electric power requirements within the FDOT that may be effectively satisfied by photovoltaic (PV) power. Applications ranging from …

Utilizing Instructional Design Constructs To Enhance Computer-Based Instruction In Air Traffic Controller Training, Theodore Scott Rhoads

Master's Theses - Daytona Beach

This study demonstrates that a computer-based instructional design format is appropriate for novice air traffic control (ATC) training. The computer presents the student with small amounts of information in tutorial and drill and practice sequences that necessitate student interactivity. The student is then periodically audit tested to ascertain mastery of the subject matter. The result of these mid-lesson evaluations serve as a self-check so that the student can assess his/her progress in the learning cycle. The systematic design of instruction and interactive approach to learning, enhances student motivation, improves learning and retention, while placing the responsibility of achieving specific learning …

Active Vibration Control Device, Keith E. Rouch, Sanjiv Tewani, Bruce L. Walcott, Ted R. Massa, Robert W. Stephenson, L. Scott Stephens

Mechanical Engineering Faculty Patents

An active vibration control device for controlling vibration in a cantilevered member and a method for the same are disclosed. The device is comprised of a cantilevered member having a longitudinal axis comprising a sensor mounted near the free end of the member to measure motion of the member in a transverse direction and to produce a corresponding signal. A force generating assembly is mounted to the member near the free end to oppose the measured motion with a force thereby minimizing subsequent motion along the transverse axis caused by vibration.

An Investigation Of Performance Appraisal With Recommendations For White Collar And Blue Collar Workers, Mark W. Alberts

Graduate Research Papers

The accurate evaluation of an employee's performance, whether it be a salary or wage worker, is one of the most challenging problems confronting any organization. According to Lazer (1977), which is still true today, performance appraisal is absolutely necessary if an organization is to prosper in the highly competitive world of modern business.

Regardless of all that has been written about the how and why of performance appraisal, there still seems to be constant problems and areas of clear disagreement. Published writings about performance appraisal cover approximately the past 30 years and deal mostly with private corporations. Before that, performance …

Semiconductor P-N Junction Space Charge Region Capacitance, Mohammad Humayun Habib

Dissertations and Theses

The classical capacitance voltage characteristics based on the depletion approximation, is adequate at reverse bias, but introduces errors at high forward bias. Because of its inherent simplicity and compactness this classical depletion model is well studied and widely used in circuit simulators. In this work, a new model for the semiconductor space charge region (SCR) capacitance, based on physical justification, will be derived. This new model takes three input parameters, C0 , Vbi and m, thus eliminating the fitting parameter FC currently used in SPICE. This new model is applicable for any applied voltage and will be compared with the …

Selection And Implementation Of A Cad/Software System For Navigator Boats, Brian J. Finzel

Honors Capstone Projects and Theses

No abstract provided.

Acuta Enews December 1992, Vol. 21, No. 12

ACUTA Newsletters

In This Issue

Regulatory update

President's column

Dual routing protects Duke

Talking clock "tells" time

Seminar ratings

Director's column

Design Of Automotive Structural Components Using High Strength Sheet Steels Influence Of Strain Rate On The Mechanical Properties Of Sheet Steels And Structural Performance Of Cold-Formed Steel Members, Chi-Ling Pan, Wei-Wen Yu

CCFSS Library (1939 - present)

The current design criteria for effective design width being used in the AISI Automotive Steel Design Manual 1 for the design of cold-formed steel members are based on tests under static loading condition. The primary objective of this investigation was to study the validity of these effective design width formulas for members subjected to dynamic loads. This report presents a detailed description of an experimental study. Selected steels with nominal yield strengths ranging from 25 ksi to 100 ksi were uniaxially tested under different strain rates. In order to study the structural behavior and strength of cold-formed steel members having …

10th Conference On Senior Engineering Design Projects, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 10th Conference on Senior Engineering Design Projects was held on December 8, 1992 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Thermally Induced Vibration Of A Cross-Ply Laminated Plate With Hygrothermal Effects (Exact Solution), Stephen Jerry Maerz

Master's Theses - Daytona Beach

Of increasing importance in structural design is the use of fiber-reinforced polymeric composite material, notably in advanced aircraft and projectiles. These applications expose the materials to varied environmental conditions, therefore the material performance under these conditions is of great interest. One aspect of this is the solution of the dynamic response of a composite structure under elevated temperature and moisture conditions. An exact solution is formulated which describes the hygrothermal effects due to heating and moisture diffusion on one surface of a symmetric cross-ply plate made of AS/3501 graphite epoxy with simply-supported boundary conditions.

Isolating Failure Mechanisms In A Fiberglass/Epoxy Tensile Test Specimen Using Acoustic Emission Signal Parameters, Michael Kouvarakos

Master's Theses - Daytona Beach

This study used acoustic emission (AE) signal parameters to isolate the failure mechanisms in a 0° unidirectional, fiberglass/epoxy tensile test specimen. Since several failure mechanisms were known to be present, the lack of any distinctly identifiable bands in the original amplitude distribution indicated that there was considerable overlap between the AE signals of the various failure mechanisms. In order to separate the amplitude bands associated with each mechanism, it was necessary to sort on the duration of the AE signal. Two additional plots, counts versus amplitude and hits versus counts, were used to verify that the amplitude distributions were comprised …

An Efficient Technique For Finding The Desired Global Optimum Of Robotic Joint Displacement, Paul P. Lin, An-Jen J. Yang

Mechanical Engineering Faculty Publications

For an industrial robot on a daily operation basis such as pick and place, it is desired to minimize the robotic joint displacements when moving the robot from one location to another. The objective of the optimization here is to simultaneously minimize a robot end effector's positional error and the robotic joint displacements. By modifying the searching algorithm in the existing complex optimization method, this article presents a technique for finding the desired global optimum solution more efficiently. To compare the optimum searching capability between the proposed and existing searching algorithms, a modified Himmelblau's function is used as an objective …

Laminar/Turbulent Oscillating Flow In Circular Pipes, Kyung H. Ahn, Mounir B. Ibrahim

Mechanical Engineering Faculty Publications

A two-dimensional oscillating flow analysis was conducted simulating the gas flow inside Stirling engine heat exchangers. Both laminar and turbulent oscillating pipe flow were investigated numerically for Re_max = 1,920 (Va = 80), 10,800 (Va = 272), 19,300 (Va = 272), and 60,800 (Va = 126). The results are here compared with experimental results of previous investigators. Predictions of the flow regime on present oscillating flow conditions are also checked by comparing velocity amplitudes and phase difference with those from laminar theory and quasi-steady profile. A high Reynolds number k-ε turbulence model was used for turbulent oscillating pipe flow. …