Engineering Commons^™

Permeability Control Using Polymer Impregnation In Sandy Soil, Mohamed Salah Mohamed Ahmed

Archived Theses and Dissertations

No abstract provided.

Nonlinear Transient Dynamics Of Flexible Robots, Mohamed Fouad Abdel Wahab

Archived Theses and Dissertations

No abstract provided.

The World Wide Web And Technology Transfer At Nasa Langley Research Center, Michael L. Nelson, David J. Bianco

Computer Science Faculty Publications

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase …

Electronic Document Distribution: Design Of The Anonymous Ftp Langley Technical Report Server, Michael L. Nelson, Gretchen L. Gottlich

Computer Science Faculty Publications

An experimental electronic dissemination project, the Langley Technical Report Server (LTRS), has been undertaken to determine the feasibility of delivering Langley technical reports directly to the desktops of researchers worldwide. During the first six months, over 4700 accesses occurred and over 2400 technical reports were distributed. This usage indicates the high level of interest that researchers have in performing literature searches and retrieving technical reports at their desktops. The initial system was developed with existing resources and technology. The reports are stored as files on an inexpensive UNIX workstation and are accessible over the Internet. This project will serve as …

World Wide Web Implementation Of The Langley Technical Report Server, Michael L. Nelson, Gretchen L. Gottlich, David J. Bianco

Computer Science Faculty Publications

On January 14, 1993, NASA Langley Research Center (LaRC) made approximately 130 formal, 'unclassified, unlimited' technical reports available via the anonymous FTP Langley Technical Report Server (LTRS). LaRC was the first organization to provide a significant number of aerospace technical reports for open electronic dissemination. LTRS has been successful in its first 18 months of operation, with over 11,000 reports distributed and has helped lay the foundation for electronic document distribution for NASA. The availability of World Wide Web (WWW) technology has revolutionized the Internet-based information community. This paper describes the transition of LTRS from a centralized FTP site to …

A Strategy For Electronic Dissemination Of Nasa Langley Technical Publications, Donna G. Roper, Mary K. Mccaskill, Scott D. Holland, Joanne L. Walsh, Michael L. Nelson, Susan L. Adkins, Manjula Y. Ambur, Bryan A. Campbell

Computer Science Faculty Publications

To demonstrate NASA Langley Research Center's relevance and to transfer technology to external customers in a timely and efficient manner, Langley has formed a working group to study and recommend a course of action for the electronic dissemination of technical reports (EDTR). The working group identified electronic report requirements (e.g., accessibility, file format, search requirements) of customers in U.S. industry through numerous site visits and personal contacts. Internal surveys were also used to determine commonalities in document preparation methods. From these surveys, a set of requirements for an electronic dissemination system was developed. Two candidate systems were identified and evaluated …

Bachelor Of Science Degree In Computer Science, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Doctoral Programs Computer Info Systems, Info Science, Info Sytems, Computer Science, Computing Technology In Education 1994, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Ms Computer Science, Ms Computer Information Systems, Ms Computer Technology In Education, Ms Management Info System, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Inclusion Of Lubrication Forces In Dynamic Simulations, Ashok S. Sangani, Guobiao Mo

Biomedical and Chemical Engineering - All Scholarship

A new method is described for incorporating close-field, lubrication forces between pairs of particles into the multiparticle Stokes flow calculations. The method is applied to the suspensions of both spherical as well as cyliridrical particles, and results computed by the method are shown to be in excellent agreement with the exact known results available in the literature.

Test 1685: White 6175 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1675: Agco Allis 9650 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1677: White 6145 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1679: John Deere 7200 Powerquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1681: John Deere 7400 Powrquad Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1683: Agco Allis 9670 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1684: Agco Allis 9690 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary: S159 John Deere 6400, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

The Application Of Markov State Probabilities In Developing Artificially Intelligent Managerial Strategies: A Case Study Based On Major League Baseball, Arnold Vincent Arconati

Doctoral Dissertations

"Baseball is a very large industry that influences the lives and financial assets of millions of people.

Many baseball analysts estimate that even the best Major League player can increase his team's expected number of yearly wins by only 3 or 4 games. In 1993 Bobby Bonilla, a New York Mets National League outfielder, earned $5,200,000 more than the average Major League player earned. The Mets apparently believed that expenditure of this money was worth his expected additional victories. If the strategy of an Artificially Intelligent baseball manager could produce 4 more team victories than the corresponding human baseball manager, …

Synthesis Of Numerical Integrators For The Real-Time Digital Simulation Of Continuous Systems, Michael James Panzitta

Retrospective Theses and Dissertations

Real-time digital simulation is a powerful means for engineers and scientists in government, industry, and academia to perform research and training as well as serving as a basis for many commercial applications. Due to the special constraints imposed by digitally simulating continuous systems in real time, however, many of these systems either require costly high-speed components or are unable to provide suitable performance characteristics using affordable computers.

This dissertation describes a new technique for the synthesis of numerical integrators specifically designed for the real-time digital simulation of continuous systems. This methodology is based upon the fact that the state derivatives …

Kentucky Traffic Accident Facts 1994 Report, Kentucky Transportation Center, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY'S TRAFFIC ACCIDENT FACTS report for 1994 is based on accident reports submitted to the Accident Unit housed in the Kentucky State Police Information Services Branch, Records Section. As required by Kentucky Revised statutes 189.635, "every law enforcement agency whose officers investigate a vehicle accident of which a report must be made ... shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau." The stated purpose of this requirement is to utilize date on traffic accidents" for such purposes as will improve the traffic safety program in the Commonwealth." Data …

A Fringe Center Detection Technique Based On A Sub-Pixel Resolution, And Its Applications Using Sinusoidal Gratings, Ming Chang, Paul P. Lin, Wen Chih Tai

Mechanical Engineering Faculty Publications

A common problem in optical profilometry is the accuracy in locating fringe centers. This paper presents an accurate fringe center detection technique based on sub-pixel resolution using the fringe projection method. An optimum reconstruction filter is developed which has low sensitivity to noise. In fringe center detection, computer simulation results of using one-pixel and sub-pixel resolutions are compared. The detection technique is then applied to radius measurement of cylindrical objects and surface profile measurement of diffuse objects. The experimental results thus obtained through the proposed optimum reconstruction filter show significant improvement in measurement accuracy.

Interactive Learning: The Casewriting Method As An Entire Semester Course For Higher Education Teacher's Manual, Brent D. Bowen, Rebecca K. Lutte, Uno Aviation Institute

Faculty Books and Monographs

UNOAI Report 94-2

This guide explains the reasons for employing the case method as a tool in the academic discipline of aviation. It promotes the use of case writing as a unique opportunity to derive even further benefits from case analysis. The benefits to students of using case writing as a learning strategy include a focus on the strategy of a real situation; development of an ownership interest; and development of reasoning, decision making, judgment, group dynamics, formal written and oral communication ability, and organizational skills. This is a teacher's guide that includes the course syllabus, schedule and practical tips …

A Finite-Difference Method For Pseudo-Two-Dimensional Boundary Value Problems, Z. Mao, Ralph E. White

Faculty Publications

A finite-difference method is presented for solving pseudo-two-dimensional boundary-value problems. The sparse and nearly block tridiagonal properties of the matrices generated by using the finite-difference method for problems of this type are fully utilized and maintained, which yields a method that is highly efficient in the use of storage space and computation. An example shows that the central process unit time required by the method is significantly less than that required by an alternative method.

Ignition And Combustion Properties Of Pulverized Coal Suspended In Laminar Upward Flow Under High Heating Rate Condition, Masayuki Taniguchi, John C. Chen, Kiyoshi Narato, Kazuyuki Ito, Hiroshi Miyadera, Kazuhiko Kudo

Mechanical Engineering

Ignition and combustion behaviors were observed for pulverized coal particles which were suspended in a laminar upward flow and were heated by a single pulse Nd : YAG laser. The surface temperature of the particles was estimated to increase at a rate of about 10⁶K/s. For a bituminous coal, observations with high-speed video revealed that the coal particles ignited heterogeneously 1-2ms after the laser pulse operation and this was followed by the evolution of volatile materials and their combustion in the gas phase. A rate constant of surface oxidation reaction of the bituminous coal at a temperature range …

Integration Of Artificial Neural Networks And Simulation Modeling In A Decision Support System, Kenney Lecroy

Retrospective Theses and Dissertations

A simulation based decision support system is developed for AT&T Microelectronics in Orlando. This system uses simulation modeling to capture the complex nature of semiconductor test operations. Simulation, however, is not a tool for optimization by itself. Numerous executions of the simulation model must generally be performed to narrow in on a set of proper decision parameters. As a means of alleviating this shortcoming, artificial neural networks are used in conjunction with simulation modeling to aid management in the decision making process. The integration of simulation and neural networks in a comprehensive decision support system, in effect, learns the reverse …

Polarimetric Fiber Optic Weigh-In-Motion Sensor, Jieping Wang

Theses

During the past decade, the demand for new methods of measuring the weight of moving vehicles has grown substantially. In the 1980's, several techniques for weighing vehicles in motion were developed. However, they often suffer from high installation and maintenance costs as well as low accuracy. This thesis describes a new technique based on polarization preserving optical fibers. A fibercore HB600 Bow-Tie fiber with an initial beat length of 1.16 mm was employed in the present study. Sensor response is discussed in terms of the effects of force amplitudes and velocities on the calibration parameter T_f. T_{f …}

Impact On Laminated Composites: Recent Advances, Serge Abrate

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Impact damage in structures made out of composite materials is a major concern since such damage can be introduced during the life of the structure, and its mechanical properties can be drastically reduced as a result. In a previous review of the literature on impact on composite materials, this author considered 285 published before 1989. In this article over 300 articles most of which appeared after 1989 are reviewed. These figures indicate that this is a very active area of research, and the present paper seeks to present a comprehensive view of the latest developments. Taken together, these two reviews …

On The Interface Stability Of A Neck Propagating In A Sheet Reinforced With Shape-Memory Fibers, C. Q. Ru, R. C. Batra

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We propose a simple model of necking in a sheet reinforced with straight fibers made of a shape-memory alloy and examine conditions under which the interface between the necked and the unnecked region is morphologically stable. We use the Mullins and Sekerka (1963, J. Appl. Phys. 34, 323-330; 1964, J. Appl. Phys. 35, 444-450) method, established for studying the stability of a moving interface in a solidification problem, to investigate the interface stability of a propagating neck. It is found that the moving straight interface is morphologically stable for several typical cases even in the absence of surface-tension effects, and …

Optimal Design Of Laminated Plates And Shells, Serge Abrate

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Designing structures made out of composite materials represents a challenging task, since not only the thickness of the element must be determined to satisfy the constraints of the problem, but, in addition, the number of plies in the laminate and their relative orientation must also be selected. Because of their strong anisotropy, a careful selection of lay-up is required to make the best use of the capabilities of the material. In this article the optimum design of laminated plates and shells subjected to constraints on strength, stiffness, buckling loads, and fundamental natural frequencies are examined. © 1994.