Engineering Commons^™

Spectroscopic Ellipsometric Monitoring Of Electron Cyclotron Resonance Plasma Etching Of Gaas And Algaas, Paul G. Snyder, Natale J. Ianno, B. Wigert, S. Pittal, B. Johs, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

In situ real time spectroscopic ellipsometry measurements were made during electron cyclotron resonance plasma etching of radio frequency biased GaAs and AlGaAs samples. Gas mixtures used were CH₄/H₂/Ar, pure H₂ , and pure Ar. Ellipsometry provided information about damage to the surface region and AlGaAs epilayer thickness. For the methane mixture GaAs etch, damage appeared in the form of redshifted and broadened E₁ and E₁+ Δ₁ critical point features in a surface layer several tens of nm thick. The damage layer began forming within a few seconds after the start of …

An Algorithmic Approach To Loop Shaping With Applications To Self-Tuning Control Systems, Zhiqiang Gao

Electrical and Computer Engineering Faculty Publications

An algorithmic approach to feedback control design is introduced. It simplifies the existing iterative design process, which is often tedious, by reducing the design problem to solving a set of linear algebraic equations. The algorithmic nature of such an approach makes it attrative to not only off-line designs but also self-tuning control systems, where the compensators are continuously tuned on-line as the dynamics of the physical process vary with time. This is demonstrated in the example where the proposed algorithm is implemented for an industrial tension regulation system with successful simulation results. Extensions of the algorithm to …

Fault Tolerant Training For Optimal Interpolative Nets, Daniel J. Simon, Hossny El-Sherief

Electrical and Computer Engineering Faculty Publications

The optimal interpolative (OI) classification network is extended to include fault tolerance and make the network more robust to the loss of a neuron. The OI net has the characteristic that the training data are fit with no more neurons than necessary. Fault tolerance further reduces the number of neurons generated during the learning procedure while maintaining the generalization capabilities of the network. The learning algorithm for the fault-tolerant OI net is presented in a recursive formal, allowing for relatively short training times. A simulated fault-tolerant OI net is tested on a navigation satellite selection problem

Intelligent Control Of Vehicles: Preliminary Results On The Application Of Learning Automata Techniques To Automated Highway System, Cem Unsal, John S. Bay, Pushkin Kachroo

Electrical & Computer Engineering Faculty Research

We suggest an intelligent controller for an automated vehicle to plan its own trajectory based on sensor and communication data received. Our intelligent controller is based on an artificial intelligence technique called learning stochastic automata. The automaton can learn the best possible action to avoid collisions using the data received from on-board sensors. The system has the advantage of being able to work in unmodeled stochastic environments. Simulations for the lateral control of a vehicle using this AI method provides encouraging results.

Design Factors For Improving The Efficiency Of Freeproduct Recovery Systems In Unconfined Aquifers, Jagath J. Kaluarachchi, R. Elliot

Civil and Environmental Engineering Faculty Publications

Free-product recovery system designs for light hydrocarbon recovery were investigated to evaluate the effects of multiple-stage pumping, delayed startup, and uncertainty of key residual oil saturation input data using a vertically integrated three-phase flow model, ARMOS. The results obtained from a single well recovery system subjected to a given well location and uniform soil properties suggested that multiple-stage water pumping can enhance the recovery and provide optimal design conditions if cost and recovery oil volume are the targets. However, if containment of the spill area with simultaneous recovery is the target, then single-stage pumping still provides the optimal design. Delayed …

Quality Of Service Specification For Multimedia Presentations, Richard Staehli, Jonathan Walpole, David Maier

Computer Science Faculty Publications and Presentations

The bandwidth limitations of multimedia systems force tradeoffs between presentation data fidelity and real-time performance. For example, digital video is commonly encoded with lossy compression to reduce bandwidth and frames may be skipped during playback to maintain synchronization. These tradeoffs depend on device performance and physical data representations that are hidden by a database system. If a multimedia database is to support digital video and other continuous media data types, we argue that the database should provide a Quality of Service (QOS) interface to allow application control of presentation timing and information loss tradeoffs.

This paper proposes a data model …

Device And Physical Data Independence For Multimedia Presentations, Richard Staehli, Jonathan Walpole, David Maier

Computer Science Faculty Publications and Presentations

Multimedia computing promises access to any type of visual or aural medium on the desktop. But in this networked future, will every type of media be accessible from every terminal device? Current multimedia standards do not allow content that is authored for high-bandwidth workstations to scale down for low-bandwidth applications. The problem is that application requests are commonly interpreted as requests for the highest possible quality and resource overloads are handled by ad hoc methods. We can begin to solve this problem by specifying Quality of Service (QOS) requirements based on functionality rather than on content encoding and device capabilities.

Size-Dependent Adsorption Models In Microporous Materials. 2. Comparison With Experimental Data, Manuela Giustiniani, Massimiliano Giona, Douglas K. Ludlow

Chemical and Biochemical Engineering Faculty Research & Creative Works

In This Article, We Complete the Study of Size-Scaling Effects and of the Keller Model, presenting a Detailed Analysis of the Application of This Model to a Broad Range of Experimental Data on Microporous Materials (In Particular, Activated Carbon and Zeolites). Particular Attention is Focused on the Temperature Dependence of the Freundlich Exponents Αi, on the Functional Form of the Adsorption Energies, and on the Application of Keller Adsorption Isotherms in a Predictive Way to Generic Multicomponent Mixtures. © 1995, American Chemical Society. All Rights Reserved.

Finite Element Study Of The Flat Strip Rolling Process Using A Deformable Roll Model, Hany George Harmouch

Archived Theses and Dissertations

No abstract provided.

Intermodal Commuter Network Planning, Maria P. Boile

Dissertations

An intermodal commuter network is an integration of passenger transportation systems, or modes, to a single comprehensive system that provides connections among the various modes, and improved travel choices to users. In the system examined in this dissertation, commuters access their final destination via auto, rail, and intermodal auto-to-rail modes. There are numerous highway paths by which a commuter can reach the final destination. Once on the highway, the commuter can switch to rail at stations along the rail route. The commuter may also choose to walk to the rail station closest to the trip's origin.

The main focus of …

Removal Of Vocs From Air By Absorption And Stripping In Hollow Fiber Devices, Tarun K. Poddar

Dissertations

Large volumes of exhaust air streams contaminated with volatile organic compounds (VOCs) such as toluene, xylene, acetone etc. are discharged into the atmosphere by various industrial facilities. Common technologies for VOC emission abatement e.g., activated carbon adsorption, absorption in a liquid, incineration and catalytic oxidation, have many strengths as well as considerable limitations. In this study, a regenerative absorption-based removal of VOCs from N₂ in an inert, nonvolatile, organic liquid flowing in compact hollow fiber devices has been developed. The process eliminates flooding, loading and entrainment encountered in conventional absorption devices.

Contaminated air/N₂ stream was fed through the …

Computer-Aided Process Design For Waste Minimization, Konstadinos Abeliotis

Dissertations

Problems related to process design with environmental considerations have been studied in this dissertation. A new heuristic design methodology has been formulated with the objective of minimizing the adverse environmental impact of chemical processes.

This hierarchical methodology starts with the definition and analysis of a process flowsheet followed by quantification of the process environmental loads. The quantification of environmental loads is an essential aspect of this methodology, because it serves as the comparative measure for environmental performance.

If the calculated environmental loads do not satisfy the environmental constraints (e.g., regulatory limits), waste minimization is investigated in the following order:

• Pollution …

A Theoretical Analysis Of Volatile Contaminant Removal By The Pneumatic Fracturing Process, Yuan Ding

Dissertations

A mathematical model that simulates the process of contaminant removal from a pneumatically induced fracture within a porous medium is presented. It includes: (1) model development; (2) parameter evaluation; (3) statistical sensitivity analysis; and (4) model validation.

Based on the dual porosity approach, a mathematical model for a fractured porous formation is developed for both two dimensional and axial symmetrical cases. This model constitutes a pair of coupled partial differential equations for the porous medium and discrete fracture, respectively. The initial and boundary conditions have been determined based on field considerations of a soil vapor extraction system. By means of …

Vibration As An Aid In Robotic Peg-In-Hole Assembly, Hsin-Te Liao

Dissertations

This dissertation presents an analytical and experimental investigation of vibration assisted engagement for parts mating. A dynamic model of assembly is established by using Lagrange's equation for impact to derive impact equations for a robotic manipulator in peg-in-hole assembly. The model can be used to analyze part motion and contact force in the mating of parts by robots. The impact equations of a SCARA robot are derived using this model and utilized to investigate how robot configuration, insertion speed, chamfer angle, coefficient of restitution and other system parameters affect impulsive force and departure angle in the assembly of a peg …

Particle Deposition On Surfaces In A Divergent Channal Flow, Ding Sun

Dissertations

Particle trajectory and deposition of two phase gas-solid flows in a convergent or divergent two-dimensional channel are investigated numerically in a wide range of parameters. For the fluid phase, a two dimensional, incompressible laminar fluid flow is considered in the analysis. The particle phase is a diluted suspension. The effects of inertia, gravity, viscous force and electrostatic image force are included in the computational model.

Both convergent and divergent channel flow are solved by the finite element method based on the software FIDAP. The flow separations will appear in a divergent channel and their separation positions are obtained in the …

Performance Analysis For Genetic Algorithms., Hermrean Wong

Dissertations

Genetic algorithms have been shown effective for solving complex optimization problems such as job scheduling, machine learning, pattern recognition, and assembly planning. Due to the random process involved in genetic algorithms, the analysis of performance characteristics of genetic algorithms is a challenging research topic. Studied in this dissertation are methods to analyze convergence of genetic algorithms and to investigate whether modifications made to genetic algorithms, such as varying the operator rates during the iterative process, improve their performance. Both statistical analysis, which is used for investigation of different modifications to the genetic algorithm, and probability analysis, which is used to …

The Effect Of Chlorine, Sulfur And Phosphorus Compounds On Deactivation Of Palladium Catalysts, Tai-Chiang Yu

Dissertations

The effects of HCl, H₂S, tributyl phosphate (TBP), P₂O₅, and zinc dialkyldithophosphate (ZDP) as catalyst poisons for methane oxidation over palladium catalysts supported on γ-alumina were investigated in this study. The overall reaction rate of methane oxidation over palladium catalysts can be simplified into a pseudo first order reaction under excess oxidation conditions.

The deactivation of the catalyst poisoned by HCl is attributed to the loss of active sites due to volatilization of PdCl₂. H₂ treatment at 200 °C can reactivate the catalyst poisoned by HCl at temperatures of up to …

Analysis Of Cim Performance Using Different Lan Structures A Simulation Approach, Kirk Rawle

Theses

This research illustrates a systematic procedure for modeling and performance analysis of the integration effect of communication network to the physical system. The concept is to model different layouts of Computer Integration Manufacturing (CIM) using different Local Area Network(LAN) structures. The steps to accomplish this concepts are, a) To determine the performance measures for physical layouts and the communication network, in order to obtain a performance analysis. b) Modeling the physical layout using Promodel simulation package. c) Extracting results from the outcome of the simulation of the physical layout and using this as input to the communication network simulation. d) …

Auditing & Measuring The Need For Flexibility In A Manufacturing Facility, Kartika-Sari Stroman

Theses

Flexible manufacturing was created out of the need for facilities to be able to efficiently respond to changes in their environment so as to build a competitive advantage. Flexible manufacturing (FM) is currently viewed as a way for facilities to be able to introduce and produce multiple products quickly and more efficiently. In this research we will present some new tools to help managers address the changes that are affecting the facility.

An audit was developed to help system designers identify the changes that are impacting the facilities. The audit provides the opportunity to understand the changes that are occurring …

Optimizing Rail-Truck Intermodal Drayage Operations, Wen Zhang

Theses

This thesis presents a case study of the trucking (or drayage) portion of rail-truck intermodal freight transportation. The approach used was to examine in detail the current costs and potential for improvement at one New Jersey intermodal terminal. The analysis is conducted using a mathematical programming model to find an optimal scheduling plan for the drayage operation. To solve the model more efficiently, a modification is made to explore the special structure of the original problem which has a sparse constraint matrix. The model is solved first with an objective function that minimizes the total cost of the operation, and …

Synthesis Of Boron Nitride/Vycor Composite Membrane Structures By An Optimized Lpcvd Process, Chenna Ravindranath

Theses

Since the advent of the idea of ultrafiltration, microporous membranes have come through a long way in establishing a niche as an efficient technology for gas separation applications. More and more research is aimed at reducing pore size towards nanolevels, when separation factor is the criterion rather than the permeability. This work is focused at synthesizing and characterizing microporous inorganic membranes for gas separations by molecular sieving. BN was deposited on mesoporous vycor tubes using triethylamine borane complex (TEAB) and ammonia as precursors. Effect of temperature and deposition geometry on permeability of various gases has been studied. Very high selectivities …

Algorithms For The Njit Turbonet Parallel Computer, Nitin J. Lad

Theses

Element selection for arrays, array merging, and sorting are very frequent operations in many of today's important applications. These operations are of interest to scientific, as well as other applications where high-speed database search, merge, and sort operations are necessary and frequent. Therefore, their efficient implementation on parallel computers should be a worthwhile objective. Parallel algorithms are presented in this thesis for the implementation of these operations on the NET TurboNet system, an in-house built experimental parallel computer with TMS320C40 Digital Signal Processors interconnected in a 3-D hypercube structure. The first algorithm considered is selection. It involves finding the k-th …

Low Pressure Chemical Vapor Deposition Of Tungsten As An Absorber For X-Ray Masks, Hongyu Chen

Theses

Tungsten film is one of promising materials for X-ray absorber in X-ray Lithography technology because of its high X-ray absorption and refractory properties. This study focus on CVD method to make tungsten film for X-ray absorber.

In this work, a cold wall, single wafer, Spectrum 211 CVD reactor was used for the deposition of tungsten from H, and WF6. The growth kinetics were determined as a function of temperature, pressure and flow ratio. The deposition rate of as deposited tungsten films was found to follow an Arrehnius behavior in the range of 300-500°C with an activation energy of 55.7 kJ/mol. …

Reverse Osmosis As A Pretreatment Of Ion Exchange Equipment At Pse & G'S Hudson Generation Station, Steven Leon

Theses

Public Service Electric and Gas Company's Hudson Generating Station has historically had problems providing sufficient high quality water for its two once through, supercritical design boilers. The station requires over 60 million gallons annually to compensate for system losses.

The stations' ion exchange demineralizers proved to be costly to operate and overall inefficient in performance. Drawbacks include: short service cycles, periodic contamination of storage tanks due to premature breakthrough, prohibitively high chemical regenerant costs, excessive labor requirements, frequent resin replacement, and overall unreliable plant operations.

A reverse osmosis unit was installed as a pretreatment to the demineralizers to offset these …

Chute Flow Experiments, Yahong Zhang

Theses

The objective of this thesis is to study the behavior of granular materials flowing down an inclined chute using three diagnostic techniques under different chute inclination angles and chute floor conditions. The three methods are: (1) tracking the motion of single particle within the mass in a noninvasive manner using a transmitting sphere and antenna receiving system, (2) scale mass flow rate measurement, and (3) high speed camera system to obtain flow velocity measurements.

For these purposes, an experimental setup has been completed and a set experiments has been performed.

A Study Of Settlement In Landfills Due To Biodegradation, Michael Guasconi

Theses

Finding new space for landfills is difficult due to land availability, stringent environmental regulations, and public sentiment. So other means of waste disposal, such as hauling it to a distant landfill, or incinerating it, will have to be resorted to. These methods may be unpopular with the public involved. By studying settlement due to biodegradation, ways to increase settlement can be found, allowing for additional waste disposal capacity in operating, and closed landfills.

Existing theoretical models are based on rheological concepts, not on biodegradation. So, they do not realistically model settlement. In this study, a model to determine the rate, …

Congestion Management Systems Development And Implementation : Four Case Studies, Arlene Rose-Marie Willis

Theses

To address concerns of poor air quality, congested highways and the need to manage and plan for transportation within budgetary constraints, the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) mandated the development and implementation of a Congestion Management System (CMS). Primarily, a CMS will fuel transportation decision making with information on system performance and alternate strategies to alleviate congestion and enhance mobility. Efforts through ISTEA are expected to produce a more efficient American transportation system -- this thesis takes a look at the preparatory activities.

It is based on a federally funded project with metropolitan planning organizations (MPOs) in …

The Effect Of Liquid Gallium On Plastics, Vivek P. Dwivedi

Theses

As part of a joint effort by Cornell University and NJIT to find a replacement for mercury as a pressuring medium for P-V-T devices, we investigated the effect of liquid gallium on four thermoplastics: two semi-crystalline ( high density polyethylene and polypropylene ) and two amorphous ( polystyrene and polymethylmethacrylate ). Test specimens were covered with liquid gallium and held in vacuum oven at temperatures close to their melting points for up to two weeks. Change in weight after treatment with gallium was measured, along with tensile testing and particle analysis using dispersion x-ray spectroscopy. The results are compared with …

Removal Of Vocs From Waste Gas Streams By A Hollow Fiber Permeator, Varinder Pal Malik

Theses

Removal of various VOCs from air/nitrogen feed streams using a novel hollow fiber membrane was studied. Hollow Fiber Module (HFM) used had composite silicone membranes wherein an ultrathin (~ 1μm), nonporous silicone rubber membrane layer had been plasma polymerized on a porous (porosity: 0.4) polypropylene substrate. VOCs studied were toluene, methanol, acetone, methylene chloride and hexane. Primary focus was on single VOCs, although separation of VOC mixtures was also briefly studied. HFM was found to be extremely effective in removing various VOCs from feed streams. Removal of 90-99 % of various VOCs was achieved at low feed flow rates and …

Performance Evaluation Of Specialized Hardware For Fast Global Operations On Distributed Memory Multicomputers, Rajesh Madukkarumukumana Sankaran

Dissertations and Theses

Workstation cluster multicomputers are increasingly being applied for solving scientific problems that require massive computing power. Parallel Virtual Machine (PVM) is a popular message-passing model used to program these clusters. One of the major performance limiting factors for cluster multicomputers is their inefficiency in performing parallel program operations involving collective communications. These operations include synchronization, global reduction, broadcast/multicast operations and orderly access to shared global variables. Hall has demonstrated that a .secondary network with wide tree topology and centralized coordination processors (COP) could improve the performance of global operations on a variety of distributed architectures [Hall94a]. My hypothesis was that …