Engineering Commons^™

Catalytic Oxidation Of Methanol On Pt/C-Spe And Ptru/C-Spe Electodes, Aihua Su, Changzhi Li, Gongquan Sun, Ying Zhang, Tianhong Lu

Journal of Electrochemistry

Anode catalysts of methanol oxidation for direct methanol fuel cell, Pt/C and PtRu/C, ere prepared by chemical reduction in this work. The results indicated that the PtRu/C showed higher electrocatalytic activity than that of Pt/C. It was explained by XRD and XPS analyses that the existence of Ru enhanced the catalytic activity for electrochemical oxidation of methanol.

Influence Of O-Phenylenediamine On The Catalysis At Hrp Enzyme Electrode In 1,4-Dioxane, Hong Chen, Hui-Huang Wu

Journal of Electrochemistry

Horseradish peroxidase (HRP) was immobilized by crosslinkage on the glassycarbon electrode to prepare the enzyme electrode, where the reduction of H₂O₂ was studied in 1,4-dioxane media. It was shown that HRP electrode can catalyze the reduction of H₂O₂ without anymedintor, however, as an activator, o-phenylenediamine can promote the bio-catalysis. In thepresence of the activator, the parallel reactions occurred on the enzyme electrode. The workingcondition of the HRP electrode was investigated as the sensors for H₂O₂ and o-phenylenediamine, also the influence of water content in organic phase was discussed on the performance …

Study Of The Action Mechanism Of A New Type Additive Sd-1 On The Electrodepositional Process Of Zinc, Huaqiang Wu, Yiqin Yan, Guangming Ni

Journal of Electrochemistry

The action mechanism of a new type additive SD-1 on the electrodepositionalprocess of zinc is reported.The results showed that the additive SD-1 is not electrochemistry activesubstane in the range of adsorption potential at rotating disk electrode surface. The action of additive SD-1 on the electrodepositional process of zinc is considerated to be fitting in with the diffusion controlmechanism.

1995 Strategic Plan For Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Check from Mr. Gerst Letter from Dr. Omtvedt Plan for Renovation Decision to Replace Roof Estimate from Landscaping

Equivalent Relationship Of Function-Level Representation And Implementation Of Unified Indexing Of Fft Algorithms, Nee-Hua Cho

Dissertations and Theses

With the advance of the VLSI technology, the FFT algorithm has been pushed further in solving the multidimensional array signal processing in real time. Many DSP chip users have tried to find ways to improve addressing huge data in multidimension systems with minimum cost and maximum performance. However, there is no efficient method to address data for 1-D to M-D FFTs.

A methodology has been defined to conquer the addressing problem of M-D FFT. It is well known that the twiddle factor matrix of Discrete Fourier Transform (DFT) can be recursively factored into basic butterfly stage matrices. The matrix can …

Malt Drying Model Verification For Efficiency Improvement, John David Kribs

Dissertations and Theses

The aim of this work has been to minimize the thermal energy required to dry malt in deep beds while maintaining malt quality, and without increasing the drying time more than one hour. Malt drying usually takes place in deep bed (.7-1 m) driers by forcing hot air through the bed.

Measurements of inlet and outlet relative humidity, temperature, and airflow at a drier at Great Western Malting Company's Vancouver, Washington facility were made to find average moisture content versus time. The measurements were used to develop a wetted surface model of a malt bed. However, the model was not …

Ultrasonic Radiative Transfer In Polycrystalline Media: Effects Of A Fluid–Solid Interface, Joseph A. Turner, Richard L. Weaver

Department of Engineering Mechanics: Faculty Publications

In previous derivations of the ultrasonic radiative transfer equation (URTE) for the modeling of multiply scattered diffuse ultrasound in polycrystalline media, the boundary conditions appropriate to experiments performed in a water bath were not used. In the present work, this fluid–solid boundary condition is discussed as it applies to the URTE. An interpolation scheme is developed that is consistent with the discrete ordinates method used for the solution of the URTE. Steady-state and time-dependent results are presented for the solution of the URTE with a fluid–solid boundary condition. The steady-state results show that diffusive behavior is exhibited nearer the specimen …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 11, Number 9, November 1995, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Acuta Enews November 1995, Vol. 24, No. 11

ACUTA Newsletters

In This Issue

From the President

Voice Cellular Services at CMU

CTI for Universities Network 2000 at UTMB

From ACUTA Headquarters

Analysis Of Ladar Range Resolution Enhancement By Sinusoidal Phase Modulation, Leonard T. Masters, Martin B. Mark, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

The ability of a ladar system to resolve two or more separate returns from a combined echo is related to the effective correlation bandwidth of the pulse emitted by the ladar system. Phase modulation of an outgoing pulse introduces additional frequency components, which increases the effective correlation bandwidth of the pulse and thus improves the range resolution of the system. In this paper, we discuss the general theoretical basis for achieving improved range resolution using a modulated waveform and a matched filter receiver. We then demonstrate these concepts by considering the particular case of improved range resolution for a sinusoidally …

Heterodyne Ladar System Efficiency Enhancement Using Single-Mode Optical Fiber Mixers, Donald K. Jacob, Martin B. Mark, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

A theoretical performance analysis of a heterodyne ladar system incorporating a single-mode fiber receiver has been performed. For our purposes, the performance parameters of interest are the coupling and mixing efficiency of the ladar receiver, as they relate to the overall system carrier-to-noise ratio. For a receiver incorporating a single-mode fiber mixer, the received and local-oscillator fields are matched both spatially and temporally at the detector, yielding 100% mixing efficiency. We have therefore focused our efforts on determining an expression for the efficiency with which a diffuse return from a purely speckle target can be coupled into the receiving leg …

Image Restoration Of Dispersion-Degraded Images From A Liquid-Crystal Beam Steerer, Ronald J. Broessel, Vince Dominic, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Liquid-crystal arrays represents one of the first practical technologies capable of steering light by electronic control only. We use such a device to steer the field of view of a broadband imaging sensor. Unfortunately, dispersion degrades the image quality by smearing out details in the image and by introducing multiple diffraction orders (echoes) at the detector plane. We present a method to compensate for these unwanted effects and thus restore the broadband images obtained with the beam steerer. We use the beam-propagation method to find the wavelength-dependent impulse response, from which we determine the appropriate Wiener filter. When training data …

Fertigation Techniques For Different Irrigation Methods, Charles M. Burt

BioResource and Agricultural Engineering

- The irrigation method influences whether or not chemicals must be injected at a constant rate.
- The irrigation method influences the optimum duration of chemical injection.
- Chemical injection rates may inadvertently vary during an irrigation set for many reasons: improper mixing, system flow rate fluctuations, and system pressure fluctuations
- Drip systems must account for the disposal of filter flush water.

Aliasing Reduction In Staring Infrared Imagers Utilizing Subpixel Techniques, Joseph C. Gillette, Thomas M. Stadtmiller, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

We introduce and analyze techniques for the reduction of aliased signal energy in a staring infrared imaging system. A standard staring system uses a fixed two-dimensional detector array that corresponds to a fixed spatial sampling frequency determined by the detector pitch or spacing. Aliasing will occur when sampling a scene containing spatial frequencies exceeding half the sampling frequency. This aliasing can significantly degrade the image quality. The aliasing reduction schemes presented here, referred to as microscanning, exploit subpixel shifts between time frames of an image sequence. These multiple images are used to reconstruct a single frame with reduced aliasing. If …

Photovoltaic Applications For Disaster Relief, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Hurricanes, floods, tornadoes, and earthquakes are natural disasters that can happen at any time destroying homes, businesses, and natural surroundings. One such disaster, Hurricane Andrew, devastated South Florida leaving several hundred-thousand people homeless. Many people were without electrical service, functioning water and sewage systems, communications, and medical services for days, even weeks in the aftermath of the storm. Emergency management teams, the military and countless public and private organizations staged a massive relief effort. Dependency on electrical utility power became a pronounced problem as emergency services were rendered to survivors and the rebuilding process started.

Many of the energy needs …

A Feasibility Study On The Automation Of Domestic Airline Passenger Customer Service Check-In Procedures For Far Part 121 Carriers, Don Michael Trevor Bennett

Master's Theses - Daytona Beach

This study was conducted in an attempt to determine whether airlines can benefit from a fully automated customer service system which will be used by major, Part 121, operators for domestic travel purposes only. The proposed system will be designed to alleviate airport terminals check-in counter congestion and improve customer service personnel effectiveness and efficiency.

Domestic traffic is expected to increase by 50 percent by the year 2004. An Automatic Ticketing and Baggage (ATB) system will allow passengers to process all flight related transactions only once. A self checking-in system allows a passenger to obtain boarding passes and destination bag …

Groundwater Study: Toyota Motor Manufacturing, Usa Georgetown, Kentucky, Gary Felton, Lyle V. A. Sendlein, Teri Dowdy, Daryl Hines

KWRRI Research Reports

An eighteen month study of the Toyota Motor Manufacturing (TMM) plant site and the surrounding area was undertaken. The basic charge for this project was to characterize the groundwater that is potentially impacted by the TMM plant site. This included occurrence, flow direction, and, if possible, velocity. Because the area is karstified (has sinkholes, springs, caves, etc.) surface water and groundwater are intimately connected and, hence, surface water was frequently an important component of this work.

Data from TMM construction plans and monitoring work done subsequent to construction were elicited from the various repositories within the TMM infrastructure. Aerial color …

A Psychological Perspective On Service Segmentation Models: The Significance Of Accounting For Consumers' Perceptions Of Waiting And Service, Ziv Carmon, J. George Shanthikumar, Tali F. Carmon

Industrial and Manufacturing Engineering

We examine how service should be divided and scheduled when it can be provided in multiple separate segments. We analyze variants of this problem using a model with a conventional function describing the waiting cost, that is modified to account for some aspects of the psychological cost of waiting in line. We show that consideration of the psychological cost can result in prescriptions that are inconsistent with the common wisdom of queuing theorists derived according to the conventional approach (e.g., equal load assignments). More generally, our intention in this paper is to illustrate that aspects of the psychological cost of …

Equilibrium Phase-Behavior Of Nematic Mixtures, Hao-Wen Chiu, Thein Kyu

College of Polymer Science and Polymer Engineering

A phenomenological model for predicting phase diagrams of a binary nematic mixture containing side chain liquid crystalline polymers and/or low molar mass liquid crystals has been proposed by combining Flory-Huggins free energy of isotropic mixing and Maier-Saupe free energy for nematic ordering of the nematogens. Two orientational order parameters, s(1) and S-2, Of the two components in the mixtures having two different clearing temperatures are taken into consideration in the calculation. The Flory-Huggins interaction parameter, chi, and the nematic interaction parameter of the Maier-Saupe theory, nu(1) and nu(22), are assumed to be functions of inverse absolute temperature. Further the cross-nematic …

Integrating Reconstructed Scatterometer And Advanced Very High Resolution Radiometer Data For Tropical Forest Inventory, David G. Long, Perry J. Hardin

Faculty Publications

A scientific effort is currently underway to assess tropical forest degradation and its potential impact on Earth's climate. Because of the large continental regions involved, Advanced Very High Resolution Radiometer (AVHRR) imagery and its derivative vegetation index products with resolutions between 1 and 12 km are typically used to inventory the Earth's equatorial vegetation. Archival AVHRR imagery is also used to obtain a temporal baseline of historical forest extent. Recently however, 50-km Seasat-A Scatterometer (SASS) Ku-band imagery (acquired in 1978) has been reconstructed to = 4-km resolution, making it a supplement to AVHRR imagery for historical vegetation assessment. In order …

Development And Testing Of A New Optimum Design Code For Hypersonic Wind Tunnel Nozzles, Including Boundary Layer, Turbulence, And Real Gas Effects, Ralph C. Tolle

Theses and Dissertations

A robust and efficient optimization code is developed and validated. The code is used to redesign an existing Mach 12 wind tunnel nozzle and utilizes response surface methodology (RSM) techniques. Explicit, globally second-order, flux-difference-splitting algorithms are used to solve the Navier-Stokes (NS) and Parabolized Navier-Stokes (PNS) flow solvers incorporated into the optimizer code. Either the Baldwin-Lomax or the Yang-Shih k-s turbulence model may be employed in the optimization code. First, 2-D/axisymmetric NS and PNS flow solvers are developed/modified and account for perfect gas/nonequilibrium chemically reacting flows. All solvers are validated against Computational Fluid Dynamics (CFD) and experimental data. The optimization …

Analysis Of Soil Vapor Extraction Expenses To Estimate Bioventing Expenses, Steven M. Loken

Theses and Dissertations

An in-depth analysis of the expenses incurred with five soil venting petroleum remediation projects was accomplished. The data was obtained from receipts provided by a major United States petroleum refiner and distributor. Cost categories were designed that incorporated all costs and provided a method to analyze the data. The five cost categories used were: permits, equipment, management, utilities, and analysis. Further analysis showed trends and described the behavior of the costs related to remediation events. The relative percentile for each cost category was found to be consistent among the projects. Many costs were also found to be very linear throughout …

Use Of Respirometry To Determine The Effect Of Nutrient Enhancement On Jp-8 Biodegradability, Christian T. Totten

Theses and Dissertations

The purpose of this study was to use respirometry to measure the impact of nutrient combinations or treatments on JP - 8 biodegradation under simulated fuel spill soil conditions. The study was designed observe one soil type at a constant fuel exposure level of 1% and a constant moisture of 60% of field capacity. Three experiments conducted were of two and three factor designs with potassium nitrate and sodium phosphate addition levels serving as two factors and fuel serving as a third factor in Experiments 1 and 2. Cumulative oxygen values obtained by the respirometer were assumed to be a …

Device And Physical Data Independence For Multimedia Presentations, Richard Staehli, Jonathan Walpole, David Maier

Computer Science Faculty Publications and Presentations

Multimedia computing promises access to any type of visual or aural medium on the desktop. But in this networked future, will every type of media be accessible from every terminal device? Current multimedia standards do not allow content that is authored for high-bandwidth workstations to scale down for low-bandwidth applications. The problem is that application requests are commonly interpreted as requests for the highest possible quality and resource overloads are handled by ad hoc methods. We can begin to solve this problem by specifying Quality of Service (QOS) requirements based on functionality rather than on content encoding and device capabilities.

Customizable Operating Systems, Jonathan Walpole, Crispin Cowan, Andrew P. Black, Jon Inouye, Calton Pu, Shanwei Cen

Computer Science Faculty Publications and Presentations

A customizable operating system is one that can adapt to improve its functionality or performance. The need for customizable and application-specific operating systems has been recognized for many years, but they have yet to appear in the commercial market. This paper explores the notion of operating system customizability and examines the limits of existing approaches. The paper begins by surveying system structuring approaches for the safe and efficient execution of customizable operating systems. Then it discusses the burden that existing approaches impose on application software, and explores techniques for reducing this burden. Finally, support for customizability in the Synthetix project …

Fatigue Behavior Of The Equine Third Metacarpus: Mechanical Property Analysis, V.A. Gibson, S.M. Stover, R.B. Martin, J.C. Gibeling, N. H. Willits, M.B. Gustafson, L.V. Griffin

Biomedical Engineering

This is the first in a series of experiments to study the fatigue properties of equine cannon (third metacarpal) bone specimens from Throughbred racehorses. Monotonic and fatigue tests to failure were performed in four-point bending on diaphyseal specimens in a 37°C saline bath to answer three initial questions. (a) Will a linear variable differential transducer yield the same elastic modulus as strain gauges? (b) Will fatigue results depend on whether the periosteal or endosteal side of the beam is in tension? (c) Are there regional variations in the monotonic and fatigue properties of the cannon bone midshaft? Eighteen left-right pairs …

Spectroscopic Ellipsometric Monitoring Of Electron Cyclotron Resonance Plasma Etching Of Gaas And Algaas, Paul G. Snyder, Natale J. Ianno, B. Wigert, S. Pittal, B. Johs, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

In situ real time spectroscopic ellipsometry measurements were made during electron cyclotron resonance plasma etching of radio frequency biased GaAs and AlGaAs samples. Gas mixtures used were CH₄/H₂/Ar, pure H₂ , and pure Ar. Ellipsometry provided information about damage to the surface region and AlGaAs epilayer thickness. For the methane mixture GaAs etch, damage appeared in the form of redshifted and broadened E₁ and E₁+ Δ₁ critical point features in a surface layer several tens of nm thick. The damage layer began forming within a few seconds after the start of …

An Algorithmic Approach To Loop Shaping With Applications To Self-Tuning Control Systems, Zhiqiang Gao

Electrical and Computer Engineering Faculty Publications

An algorithmic approach to feedback control design is introduced. It simplifies the existing iterative design process, which is often tedious, by reducing the design problem to solving a set of linear algebraic equations. The algorithmic nature of such an approach makes it attrative to not only off-line designs but also self-tuning control systems, where the compensators are continuously tuned on-line as the dynamics of the physical process vary with time. This is demonstrated in the example where the proposed algorithm is implemented for an industrial tension regulation system with successful simulation results. Extensions of the algorithm to …

Fault Tolerant Training For Optimal Interpolative Nets, Daniel J. Simon, Hossny El-Sherief

Electrical and Computer Engineering Faculty Publications

The optimal interpolative (OI) classification network is extended to include fault tolerance and make the network more robust to the loss of a neuron. The OI net has the characteristic that the training data are fit with no more neurons than necessary. Fault tolerance further reduces the number of neurons generated during the learning procedure while maintaining the generalization capabilities of the network. The learning algorithm for the fault-tolerant OI net is presented in a recursive formal, allowing for relatively short training times. A simulated fault-tolerant OI net is tested on a navigation satellite selection problem

Intelligent Control Of Vehicles: Preliminary Results On The Application Of Learning Automata Techniques To Automated Highway System, Cem Unsal, John S. Bay, Pushkin Kachroo

Electrical & Computer Engineering Faculty Research

We suggest an intelligent controller for an automated vehicle to plan its own trajectory based on sensor and communication data received. Our intelligent controller is based on an artificial intelligence technique called learning stochastic automata. The automaton can learn the best possible action to avoid collisions using the data received from on-board sensors. The system has the advantage of being able to work in unmodeled stochastic environments. Simulations for the lateral control of a vehicle using this AI method provides encouraging results.