Engineering Commons^™

Detection Of Methane Leaks By The Use Of Mid-Range Infrared Camera, Jared Rosario, Oscar Salcido

Undergraduate Research Symposium Posters

Timely detection of methane leaks from natural gas infrastructure, like pipelines and valves, is essential for mitigating environmental and safety risks. This research focuses on using mid-wave infrared (MwIR) cameras on unmanned aerial systems (UAS) to detect leaks. By leveraging machine learning, the study aims to develop an efficient, real-time methane inspection system that operates directly on embedded processors on UAS platforms.

This project employs the FLIR G300a OGI camera for remote gas inspection, utilizing video preprocessing and optical flow to mask gas plumes in footage. The YOLOv8 deep learning model is used to detect gas pixels and segment the …

Transferred-Learning Intrusion Detection System For Internet Of Vehicles, Tan Nguyen

Undergraduate Research Symposium Posters

The growing connectivity of modern vehicles, particularly within the Internet of Vehicles (IoV), has significantly increased the need for robust cybersecurity solutions. Building upon the work of Yang and Shami (2022), who proposed a transfer learning and optimized convolutional neural network (CNN)-based Intrusion Detection System (IDS) for IoV, this research seeks to validate their results and explore potential enhancements. The original IDS demonstrated exceptional performance, with detection rates surpassing 99.25% on benchmark datasets. In this study, we first replicate their experiments using the Car-Hacking dataset to confirm the effectiveness of the proposed model and then evaluate its ability to detect …

Biochar/Hydrochar Applications In Disinfection Byproduct Removal For Drinking Water, Ashleu Mussio Marquez, Donna Rouhani, Ismail Abdulraheem, Kers Ung-Watson, Ahmadreza Khatamgooya, Scarlet Nelson, Dr. Jaeyun Moon, Dr. Erica Marti

Undergraduate Research Symposium Posters

This project aims to investigate the process of disinfection byproduct (DBP) removal in drinking water, looking into the applications of biochar and hydrochar, which are low cost and environmentally sustainable adsorbents. These carbon-based adsorbents are derived from agricultural waste biomass, such as walnut shells. These adsorbents will be used to capture and remove contaminants in water, such as DBPs. DBPs are formed when chemical disinfectants react with organic and inorganic substances naturally present in water. The targeted DBPs for adsorption include trihalomethanes, haloacetic acids, haloacetonitriles, and nitrosamines. An example of high concentration DBP formation is during emergency chlorination, where excess …

Integrated Sustainability Analysis Of A Shared Micro-Mobility System In University Campus: Life-Cycle Assessment And User Impact Study Of Electric Scooters, Md Afif Rahman Chowdhury

LSU Master's Theses

The objective of this study is to evaluate the environmental, economic, and social impacts of implementing e-scooter technology on the LSU campus. The study is structured into three main parts: (1) an environmental life-cycle assessment of e-scooters, (2) a comparative environmental and economic impact assessment of e-scooters, cars, and campus shuttle buses, and (3) a comprehensive survey of e-scooter users to assess their characteristics, satisfaction levels, and comfort while using e-scooters on the LSU campus.

To achieve the objectives of the study, a life-cycle assessment (LCA) was conducted to assess the environmental sustainability of e-scooters, encompassing all stages from raw …

Next Generation Permeable Pavement For Enhanced Durability And Functionality, S M Tanvir

LSU Master's Theses

Porous Asphalt Concrete (PAC), also known as Open-Graded Friction Course (OGFC), is known for its high permeability, which provides benefits such as enhanced rainwater drainage, improved skid resistance, and reduced hydroplaning risks. These characteristics are due to its high air void content, allowing water to flow through the pavement and reducing splash, spray, and noise compared to conventional asphalt mixes. However, this high air void content also contributes to durability concerns, such as raveling, stripping, and clogging, which can reduce service life and increase costs, making OGFC more expensive than conventional asphalt mixtures.

This research focuses on identifying the failure …

Geotechnical Characterization Of Saline Sabkha Soil Of Abu Dhabi, Uae, And Its Stabilization Using Steel Slag And Sodium Silicate, Ahmed Maher Abdulla

Thesis/ Dissertation Defenses

Saline sabkha soil is widely distributed across the Abu Dhabi coastal regions of the UAE. These soils are associated with geotechnical problems that principally emerge from the heterogeneous nature of the soil and its high soluble salt content. Upon exposure to fresh water, the soluble salt dissolves, resulting in loss of the bond that once cemented the soil particles. In addition, the volume occupied by the salt minerals becomes part of the voids between the particles. This process results in a weak and loose soil structure of lower bearing capacity that is ready to collapse upon being subjected to loads. …

Dynamic And Harmonic Studies Of Inverter Based Resources, Rabi Shankar Kar

USF Tampa Graduate Theses and Dissertations

As the inverter-based generation is the primary technology driving renewable energy sources such as solar photovoltaic and wind turbines, its penetration is increasing rapidly. Due to the high penetration, there are multiple situations of IBR misoperation due to any type of grid contingency. This dissertation focuses on exploring the response of IBR towards grid contingency.

The primary objectives of the study are as follows: 1. Conducting a harmonic analysis of inverter-based resources when subjected to balanced and unbalanced grid conditions, 2. The use of a circuit simplification method to streamline the analysis process and study the dynamic response of IBR …

Applying Visual Identity At The Main Entrances To Cities (Case Study: Entrance To Beni Suef City), Nesma Mohamed Abd El- Maksoud

Mansoura Engineering Journal

Egypt’s vision and many initiatives, such as the “Controlling Egyptian Urbanism and Supporting Visual Identity” initiative, seek to create a visual identity for Egypt’s governorates, to deepen the concept of national belonging, and to issue a guideline for visual identity at the level of each governorate. The visual identity of cities is produced from a set of urban, social, cultural, historical, and environmental variables. Economically, the research studies how to link the urban and visual identity of cities and express it through the entrances to cities and the urban spaces surrounding them to improve and develop the city’s local and …

Hybrid Energy Systems: Synergy Margin And Control Co-Design, Mario Garcia Sanz

Faculty Scholarship

Extraordinary properties emerge from subsystems' interactions. Hybrid energy systems (HESs) are a promising concept that could change the renewable energy landscape. By co-designing generation, storage, and conversion technologies, HESs can provide new electrical power services, increase grid stability and control authority, and generate energy and/or nonenergy products such as electricity, hydrogen, ammonia, heat, digital data, or fresh water. This article discusses some conditions the co-design of HESs should follow to optimize the combined system (synergy), avoiding deterioration (dysfunction). It introduces some technoeconomic synergy conditions, develops a synergy margin, and analyses several case studies, exploring also the control co-design methodology to …

Phagolysosomes Break Down The Membrane Of A Non-Apoptotic Corpse Independent Of Macroautophagy, Shruti Kolli, Cassidy J. Kline, Kimya M. Rad, Ann M. Wehman

Biological Sciences: Faculty Scholarship

Cell corpses must be cleared in an efficient manner to maintain tissue homeostasis and regulate immune responses. Ubiquitin-like Atg8/LC3 family proteins promote the degradation of membranes and internal cargo during both macroautophagy and corpse clearance, raising the question how macroautophagy contributes to corpse clearance. Studying the clearance of non-apoptotic dying polar bodies in Caenorhabditis elegans embryos, we show that the LC3 ortholog LGG-2 is enriched inside the polar body phagolysosome independent of autophagosome formation. We demonstrate that ATG-16.1 and ATG-16.2, which promote membrane association of lipidated Atg8/LC3 proteins, redundantly promote polar body membrane breakdown in phagolysosomes independent of their role …

Smartphone Haptics Can Uncover Differences In Touch Interactions Between Asd And Neurotypicals, Ivonne Monarca, Franceli L. Cibrian, Isabel López Hurtado, Monica Tentori

Engineering Faculty Articles and Research

Utilizing touch interactions from smartphones for gathering data and identifying digital markers for screening and monitoring neurological disorders, such as Autism Spectrum Disorder (ASD), is an emerging area of research. Smartphones provide multiple benefits for this kind of study, including unobtrusive data collection via built-in sensors, integrated haptic feedback systems, and the capability to create specialized applications. Acknowledging the significant yet understudied presence of tactile processing differences in individuals with ASD, we designed and developed Feel and Touch, a mobile game that leverages the haptic capabilities of smartphones. This game provides vibrotactile feedback in response to touch interactions and collects …

Synthesis And Characterization Of Titanium And Vanadium Nitride–Carbon Composites, Helia Magali Morales, David A. Sanchez, Elizabeth M. Fletes, Michael Odlyzko, Victoria Padilla, Mataz Alcoutlabi, Jason Parsons

Mechanical Engineering Faculty Publications

Titanium nitride and vanadium nitride–carbon-based composite systems, TiN/C and VN/C, were prepared using a new synthesis method based on the thermal decomposition of titanyl tetraphenyl porphyrin (TiOTPP) and vanadyl tetraphenyl porphyrin (VOTPP), respectively. The structure of the TiN/C and VN/C composite materials, as well as their precursors, were characterized using Fourier Transformed Infrared Spectroscopy, X-Ray diffraction (XRD), X-Ray energy dispersive (EDS) and X-Ray photoelectron spectroscopy (XPS). Morphologies of the TiN/C and VN/C composites were examined by means of scanning electron (SEM) and transmission electron (TEM) microscopy. The synthesis of the non-metalated tetraphenyl porphyrin, the titanium, and vanadium tetraphenyl porphyrin complexes …

Effects Of Surface Treatment On Adhesive Performance Of Composite-To-Composite And Composite-To-Metal Joints, Nikhil Paranjpe, Md. Nizam Uddin, Akm S. Rahman, Ramazan Asmatulu

Publications and Research

This study deals with the long-running challenge of joining similar and dissimilar materials using composite-to-composite and composite-to-metal joints. This research was conducted to evaluate the effects of surface morphology andsurfacetreatments onthemechanicalperformanceofadhesively bonded joints used for the aircraft industry. A two-segment, commercially available, toughened epoxy was chosen as the adhesive. Unidirectional carbon fiber prepreg and aluminum 2021-T3 alloys were chosen for the composite and metal panels, respectively. Surface treatment of the metal included corrosion elimination followed by a passive surface coating of Alodine®. A combination of surface treatment methods was used for the composite and metal specimens, including detergent cleaning, plasma …

The Future Of Flying: An Exploration Of New Aircraft Design And Energy Required To Support Advanced Air Mobility – Part 3, Sarah Nilsson

Publications

Lecture exploring new aircraft design and energy required to support advanced air mobility.

Unleaded Fuel For General Aviation, Carolina Anderson, Laura Garcia

Sustainability Conference

The Clean Air Act, passed in the late 1970s, mandating the removal of lead from most fuels due its detrimental effects on public health, yet piston-driven aircraft continue to rely on leaded aviation gas (AvGas 100LL). This fuel remains the last lead-containing fuel regulated by the Department of Transportation (DOT). Lead, added as tetraethyl lead (TEL), enhances octane levels and prevents engine detonation, vital for high-compression aircraft engines. In response to the health effects, regulating bodies like the Environmental Protection Agency (EPA) have tightened lead standards and are assessing the risk posed by AvGas. Research links even low-level lead exposure …

Novel Nanocomposite Of Carbonized Chitosan-Zinc Oxide-Magnetite For Adsorption Of Toxic Elements From Aqueous Solutions, Dalia A. Ali Eng, Ganna Gaber Ismail Eng.

Chemical Engineering

Herein, a novel nanocomposite (carbonized chitosan-zinc oxide-magnetite, CCZF) was developed to effectively remove toxic elements in water remediation. Combining the high adsorption capacities of chitosan with the magnetic properties of magnetite and the chemical stability of zinc oxide, the combination of these unique properties makes it an efficient and versatile material that offers a sustainable solution for water purification. The (CCZF) nanocomposite was synthesized through the coprecipitation method and characterized using various techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and zeta potential analysis. The results showed …

Analysis Of Dual, Onboard Storage And Separation Of Biogas In Carbon-Based Adsorbed Gas Systems, Kyle Newport, Carlos Wexler, Peter Pfeifer, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Direct utilization of "low-grade" biogas, as an important sustainable energy resource, provides a viable approach to avoid the energy-intensive upgrading step that is often required to separate CO₂ from CH₄ in order to produce a pipeline-grade fuel gas. This study investigated dual, onboard storage and separation of biogas in an adsorbed gas system (AGS) over two highly porous carbon sorbents, Br-318 and Nuchar, in the pressure range of 0-55 bar. The AGS was pressurized with a 50/50 vol % CH₄/CO₂ feed and working capacities as a function of charge-discharge pressures and temperatures were determined and …

Ptsd Increases Risk For Hypertension Development Through Pvn Activation And Vascular Dysfunction In Sprague Dawley Rats, Xinqian Chen, Xin Yan, Chunxiu Yu, Qing-Hui Chen, Lanrong Bi, Zhiying Shan

Michigan Tech Publications

This study investigates the impact of single prolonged stress (SPS), a model of post-traumatic stress disorder (PTSD), on cardiovascular responses, hypothalamic paraventricular nucleus (PVN) activity, and vascular function to elucidate the mechanisms linking traumatic stress to hypertension. Although SPS did not directly cause chronic hypertension in male Sprague Dawley (SD) rats, it induced acute but transient increases in blood pressure and heart rate and significantly altered the expression of hypertension-associated genes, such as vasopressin, angiotensin II type 1 receptor (AT1R), and FOSL1 in the PVN. Notably, mitochondrial reactive oxygen species (mtROS) were predominantly elevated in the pre-autonomic regions of the …

Reflections On Improving Industrial Investment And Financing Environment To Promote Healthy Development Of Commercial Aerospace, Cuilin Wu, Chao Zhang, Quan Cheng, Hongyu Wu

Bulletin of Chinese Academy of Sciences (Chinese Version)

As a new frontier in global technological competition, the sustainable development of the commercial aerospace industry highly depends on a sound and efficient investment and financing environment. Although China’s commercial aerospace investment and financing system has achieved initial progress, it still faces multiple challenges, including imbalanced capital structure, insufficient risk-sharing mechanisms, and weakened market incentives, which constrain industrial innovation and competitiveness. This study systematically analyzes the current status and main challenges of China’s commercial aerospace investment and financing environment and draws on international experience to propose following optimization strategies. First, improve the structure of capital supply and expand diversified financing …

Fostering Systems Thinking Through Engineering Study Abroad Programs, Desen S. Ozkan, Kirsten A. Davis, James C. Davis, Jessica Deters, Homero Murzi

School of Engineering Education Faculty Publications

Engineering study abroad programs are a novel setting for students to develop systems thinking, which has primarily been taught in formal learning environments. Through a situated learning perspective, we examined the impact of two engineering-focused study abroad experiences on developing students’ systems thinking skills. We conducted secondary data analysis to examine how first-year engineering students (n = 47) at a technical university in the United States (US) connect technical and contextual aspects of engineering in China and the UK/Ireland. The students on the China track drew connections more frequently (81% of excerpts) than those on the UK/Ireland track (49% …

Benefits And Challenges Of Constructing Low-Altitude Air Route Network Infrastructure For Developing Low-Altitude Economy, Xiaohan Liao, Chenchen Xu, Huping Ye

Bulletin of Chinese Academy of Sciences (Chinese Version)

Low-altitude airspace is a resource that needs to be fully explored, and the low-altitude economy is a new type of economic activity resulted from low-altitude airspace exploration and utilization. As the primary players of low-altitude flight activities, the commercialization and wide applications of unmanned aerial vehicles (UAVs) are promoting the prosperity of the low-altitude economy. A low-altitude air route network is an effective means to ensure the safe and efficient operations of a large number of UAVs, and it is also a new key infrastructure hosting low-altitude traffic. The history shows that the investment on public transport infrastructure as a …

Beyond Innovation Paradox: Practices And Reflections On Promoting High-Quality Development Of Commercial Aerospace With Low Costs, Chao Zhang, Qianshu Shi, Binbin Meng, Quan Cheng, Jun Zhao, Weitao Wu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Commercial spaceflight, as a national strategic emerging industry, is critical for seizing the high ground of the space economy and fostering new quality productive forces through its low-cost and high-quality development. Currently, international enterprises represented by SpaceX have gained a leading advantage through technological breakthroughs and business model innovations, posing severe challenges to China’s aerospace security and development. This study first analyzes the evolutionary trajectory of low-cost development in commercial spaceflight, then delves into the “low-cost vs. high-quality” innovation paradox faced by the traditional aerospace industry and its root causes. Building on this analysis, it examines the experiences of international …

Suggestions On Expanding Application Scenarios Of Commercial Aerospace Market, Mengru Dong, Chaofeng Huang, Ningyi Yang, Yu Yao, Yafeng Qin

Bulletin of Chinese Academy of Sciences (Chinese Version)

Expanding the application scenarios of the commercial aerospace market is an inevitable requirement for promoting the transformation and upgrading of the space industry and achieving the strategic goal of becoming a leading space power. Currently, the development of China’s commercial aerospace is in a critical transition period from technological breakthroughs to market expansion. However, there are still problems such as insufficient participation of private enterprises, low penetration of consumer markets, and insufficient competitiveness in the international market, and a sustainable and benign commercial closed loop has not yet been formed. The study analyzes the current situation of commercial aerospace market …

How Does Original And Disruptive Innovation Lead Modern Industrial System: Insights From Revolutionary Frontier Of Next-Generation Chip Manufacturing Technology, Jiang Yu, Yue Guo, Shiguang Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

Original and disruptive innovation is the foundation for tackling key technological challenges and nurturing the development of new forms of productive forces. The breakthrough of FinFET (Fin field-effect transistor) technology, a frontier manufacturing process for chips, represents a typical example of original and disruptive innovation. This breakthrough extended Moore’s Law, catalyzed the transition of semiconductor manufacturing from 2D to 3D structures, and significantly advanced the global high-tech industry, positioning it at the core of international technological competition. This study reviews the breakthrough journey of FinFET technology, specifically focusing on its development stages from “scientific discovery—formation of new technological pathways—systematization of …

Disciplinary Policy Research On Science Development Strategies For Crewed Lunar Exploration, Wei Yang, Yuyang He, Jinting Kang, Ruiyi Chen, Huihong Cheng, Li Sun, Pan Deng, Yong Wei, Yangting Lin, Xianhua Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

In order to better serve China’s crewed lunar exploration, this study researched and analyzed the current status of lunar exploration and planetary science research in China and the United States. Additionally, we conducted interviews and a questionnaire survey with experts in planetary science and deep-space exploration, and formed the following four policy recommendations: 1) Strengthening the layout and management of the disciplines of lunar and planetary sciences, and setting up a long-term and stable funding mechanism; 2) Improving the system of talent cultivation, and encouraging young talents to participate in deep-space exploration missions; 3) Strengthening the protection of original ideas, …

Situation And Challenges In Development Of China’S Commercial Aerospace, Chaofeng Huang, Chao Zhang, Jinge Li, Mengru Dong

Bulletin of Chinese Academy of Sciences (Chinese Version)

Commercial aerospace is an important support for the national aerospace power strategy and a “new growth engine” for economic development, serving as a strategic pivot to win the future competitive landscape. Currently, China’s commercial aerospace industry is facing a mixed and urgent situation. On the one hand, the international competition situation is severe, with frequency track resources being seized and squeezed, international rules being passively constrained, and global market breakthroughs being hindered. On the other hand, domestic development opportunities are highlighted. The multidimensional support of central local cooperation is constantly strengthening, and the development prospects driven by industrial demand are …

Analysis Of Status, Challenges, And Optimization Recommendations For China’S Commercial Space Policy Support System, Liming Ge, Zixuan Liu, Mingda Yang, Wenbin Ma

Bulletin of Chinese Academy of Sciences (Chinese Version)

As a strategic pillar in building a space power, commercial space has become a new frontier for global technological competition. The Chinese government and relevant regulatory authorities have introduced a series of multi-level policy documents, propelling the commercial space sector into a phase of vigorous development. This study systematically reviews the background, evolution, and implementation outcomes of China’s policy support system for commercial space. It is indicates that, in light of the goal of becoming a “space power” and the future industrial competition, China’s policy support system for commercial space still faces challenges such as ineffective policy implementation mechanisms, lack …

Research On Strategies For High Quality Development Of New Power Systems, Xiaohong Chen, Junpeng Li, Yongmei Liu

Bulletin of Chinese Academy of Sciences (Chinese Version)

New power systems are at a critical stage of transition from theory to implementation. Against the backdrop of accelerating global energy transformation and technological revolution, shifting the energy system from “scale-oriented” to “quality-driven” is both an urgent need and a key focus for advancing the high-quality development of China’s new power systems. This study employs a four-dimensional analytical framework integrating “technology-elements-industry-green transition” to identify the main challenges existing in the new power systems currently, including constraints in key technologies, imbalances in factor allocation, difficulties in industrial coordination, and instability in power supply structure. Targeted measures are proposed accordingly. (1) Strengthening …

Sound Innovations For Biofabrication And Tissue Engineering, Mengxi Wu, Zhiteng Ma, Zhenhua Tian, Joseph Rich, Xin He, Jianping Xia, Ye He, Kaichun Yang, Shujie Yang, Kam W. Leong, Luke P. Lee, Tony Jun Huang

Faculty Publications

Advanced biofabrication techniques can create tissue-like constructs that can be applied for reconstructive surgery or as in vitro three-dimensional (3D) models for disease modeling and drug screening. While various biofabrication techniques have recently been widely reviewed in the literature, acoustics-based technologies still need to be explored. The rapidly increasing number of publications in the past two decades exploring the application of acoustic technologies highlights the tremendous potential of these technologies. In this review, we contend that acoustics-based methods can address many limitations inherent in other biofabrication techniques due to their unique advantages: noncontact manipulation, biocompatibility, deep tissue penetrability, versatility, precision …

Compliant Structures Facilitate Less Invasive And Biomechanically Improved Lumbar Spinal Implants, Daniel J. Orr

Theses and Dissertations

Implants used in lumbar spinal fusion and lumbar total disc replacement procedures have improved substantially over the years, however, the opportunity remains to improve either the adjustability, durability, motion, or minimally invasive characteristics which could aid in achieving optimal surgical outcomes. It is hypothesized that the inherent advantages of compliant mechanisms specifically Deployable Euler Spiral Connectors (DESCs) and a new mechanism known as the interior contact aided rolling element (I-CORE) are well suited for each of these applications and will be explored and utilized as the basis of these proposed designs. By addressing these challenges, the research endeavors to improve …