Engineering Commons^™

A Potentially Fruitful Path Toward A Cleaner And Safer Environment: Mxenes Uses In Environmental Remediation, Ali Mohammad Amani, Milad Abbasi, Atena Najdian, Farzaneh Mohamadpour, Seyed Reza Kasaee, Hesam Kamyab, Shreeshivadasan Chelliapan, Hanieh Ardeshiri, Lobat Tayebi, Ehsan Vafa, Sarah Mosleh-Shirazi, Alireza Jahanbin, Saravanan Rajendran, Daniel Simancas-Racines

Electrical & Computer Engineering Faculty Publications

The rapid industrialization of the world has resulted in severe environmental pollution, necessitating the development of new materials such as pollution remediation. Two-dimensional (2D) MXenes have emerged as a promising family of materials due to their unique physicochemical properties, making them ideal for environmental remediation. The article sheds light on the new opportunities of MXenes in the removal of organic and inorganic contaminants, including organic dyes, pharmaceuticals, heavy metals, radionuclides, and gas pollutants. MXenes also show excellent performance in photocatalytic degradation, adsorption, and microbial inactivation with environmental safety. Moreover, their application in recovering valuable elements from waste streams is also …

Data-Driven Gradient Optimization For Field Emission Management In A Superconducting Radio-Frequency Linac, S. Goldenberg, K. Ahammed, A. Carpenter, J. Li, R. Suleiman, C. Tennant

Electrical & Computer Engineering Faculty Publications

Field emission can cause significant problems in superconducting radio-frequency linear accelerators (linacs). When cavity gradients are pushed higher, radiation levels within the linacs may rise exponentially, causing degradation of many nearby systems. This research aims to utilize machine learning with uncertainty quantification to predict radiation levels at multiple locations throughout the linacs and ultimately optimize cavity gradients to reduce field emission-induced radiation while maintaining the total linac energy gain necessary for the experimental physics program. The optimized solutions show over 40% reductions for both neutron and gamma radiation from the standard operational settings.

Detecting Sars-Cov-2 In Ct Scans Using Vision Transformer And Graph Neural Network, Kamorudeen Amuda, Almustapha Wakili, Tomilade Amoo, Lukman Agbetu, Qianlong Wang, Jinjuan Feng

Electrical & Computer Engineering Faculty Publications

The COVID-19 pandemic has presented significant challenges to global healthcare, bringing out the urgent need for reliable diagnostic tools. Computed Tomography (CT) scans have proven instrumental in detecting COVID-19-induced lung abnormalities. This study introduces Convolutional Neural Network, Graph Neural Network, and Vision Transformer (ViTGNN), an advanced hybrid model designed to enhance SARS-CoV-2 detection by combining Graph Neural Networks (GNNs) for feature extraction with Vision Transformers (ViTs) for classification. Using the strength of CNN and GNN to capture complex relational structures and the ViT capacity to classify global contexts, ViTGNN achieves a comprehensive representation of CT scan data. The model was …

Adaptive Fusion Neural Networks For Sparse-Angle X-Ray 3d Reconstruction, Shaoyong Hong, Bo Yang, Yan Chen, Hao Quan, Shan Liu, Minyi Tang, Jiawei Tian

Electrical & Computer Engineering Faculty Publications

3D medical image reconstruction has significantly enhanced diagnostic accuracy, yet the reliance on densely sampled projection data remains a major limitation in clinical practice. Sparse-angle X-ray imaging, though safer and faster, poses challenges for accurate volumetric reconstruction due to limited spatial information. This study proposes a 3D reconstruction neural network based on adaptive weight fusion (AdapFusionNet) to achieve high-quality 3D medical image reconstruction from sparse-angle X-ray images. To address the issue of spatial inconsistency in multi-angle image reconstruction, an innovative adaptive fusion module was designed to score initial reconstruction results during the inference stage and perform weighted fusion, thereby improving …

The Impact Of Chromium Ion Implantation On Ald Lead Chalcogenide Thin Films, Haifeng Cong, Charlotte Poterie, Jean Francois Barbot, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

Inherently the synthesis of semiconducting materials by Atomic Layer Deposition ALD produces only intrinsic undoped films which require the introduction of small amounts of impurities for doping to change them into extrinsic semiconductors. Apart from various in-situ diffusion doping techniques like delta doping during the ALD process, post deposition doping by ion implantation affords the best control of dose and doping profile. The present study investigates the impact of 180 keV Cr⁺ ion implantation on the properties of semiconducting ALD lead chalcogenide thin films to improve their thermoelectric figure of merit. The implantation was accomplished with 180 keV Chromium …

Potential Of Lidar And Hyperspectral Sensing For Overcoming Challenges In Current Maritime Ballast Tank Corrosion Inspection, Sergio Pallas Enguita, Jiajun Jiang, Chung-Hao Chen, Samuel Kovacic, Richard Lebel

Electrical & Computer Engineering Faculty Publications

Corrosion in maritime ballast tanks is a major driver of maintenance costs and operational risks for maritime assets. Inspections are hampered by complex geometries, hazardous conditions, and the limitations of conventional methods, particularly visual assessment, which struggles with subjectivity, accessibility, and early detection, especially under coatings. This paper critically examines these challenges and explores the potential of Light Detection and Ranging (LiDAR) and Hyperspectral Imaging (HSI) to form the basis of improved inspection approaches. We discuss LiDAR’s utility for accurate 3D mapping and providing a spatial framework and HSI’s potential for objective material identification and surface characterization based on spectral …

High-Fidelity Soh Prediction In Lithium-Ion Batteries Using Hybrid Ml Networks, Shafiyee Islam, Gon Namkoong

Electrical & Computer Engineering Faculty Publications

Accurate and efficient prediction of lithium-ion battery state of health (SOH) is critical for ensuring reliability in electric vehicles, grid storage, and aerospace systems. Traditional SOH estimation methods often struggle with nonlinear degradation behaviors and lack sensitivity to subtle electrochemical signals, limiting their real-world deployment. To address these challenges, this study examines hybrid deep learning models that integrate differential capacity (dQ/dV) analysis to enhance predictive accuracy. Four hybrid architectures - hybrid CNN-LSTM multihead, CNN extractor for LSTM, DNN-LSTM, and DNN Bi-LSTM - were developed and evaluated using the NASA randomized battery usage dataset, offering a realistic benchmark under diverse operational …

A Method For Ultrasound Servo Tracking For Puncture Needle, Shitong Ye, Bo Yang, Hao Quan, Shan Liu, Minyu Tang, Jiawei Tian

Electrical & Computer Engineering Faculty Publications

Computer-aided surgical navigation technology helps and guides doctors to complete the operation smoothly, which simulates the whole surgical environment with computer technology, and then visualizes the whole operation link in three dimensions. At present, common image-guided surgical techniques such as computed tomography (CT) and X-ray imaging (X-ray) will cause radiation damage to the human body during the imaging process. To address this, we propose a novel Extended Kalman filter-based model that tracks the puncture needle-point using an ultrasound probe. To address the limitations of Kalman filtering methods based on position and velocity, our method of Kalman filtering uses the position …

A Customized Large Single-Piece Bifrontal Implant For Post-Craniectomy Defect Reconstruction: A Case Study, Omid Ghaderzadeh, Ehsan Amirbeyk, Seyed Roholah Ghodsi, Zahra Namazi, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

Background: Large bifrontal defects pose unique reconstruction challenges due to their complex curvature and mechanical requirements. This case demonstrated how computer-aided design/manufacturing (CAD/CAM) enabled precise single-piece polymethyl methacrylate (PMMA) implant fabrication, thereby overcoming traditional limitations. Case presentation: A 25-year-old male who had undergone bifrontal decompressive craniectomy suffered a severe traumatic brain injury. The autologous bone flap had been temporarily stored in a subcutaneous fat area of the abdomen for 3 months to preserve its viability. A secondary cranioplasty was then performed using titanium miniplates and self-tapping screws for final fixation. After 2 years, the patient developed empyema and a brain …

Out Of Order And Causally Correct: Ready-Event Discovery Through Data-Dependence Analysis, Erik John Jensen, James Leathrum Jr., Christopher Lynch, Katherine Smith, Ross Gore

Electrical & Computer Engineering Faculty Publications

Data-dependence analysis can identify causally-unordered events in a pending event set. The execution of these events is independent from all other scheduled events, making them ready for execution. These events can be executed out of order or in parallel. This approach may find and utilize more parallelism than spatial-decomposition parallelization methods, which are limited by the number of subdomains and by synchronization methods. This work provides formal definitions that use data-dependence analysis to find causally-unordered events and uses these definitions to measure parallelism in several discrete-event simulation models. A variant of the event-graph formalism is proposed, which assists with identifying …

A Proximal Policy Optimization-Based Controller For Enhanced Power Sharing In Microgrids, Seyedmohammad Hasheminasab, Armin Lotfy, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

This paper introduces a Proximal Policy Optimization (PPO)-based virtual impedance (VI) controller to enhance both power sharing and system response under disturbances in inverter-interfaced microgrids. Traditional droop control methods often face challenges due to variations in feeder impedance, which degrade performance. The proposed controller continuously updates its policy based on changes in the operating environment. The control problem is modeled as a Markov Decision Process (MDP), in which the state and action spaces are explicitly defined, and a carefully designed reward function, satisfying system criteria and constraints, guides the learning process toward achieving the desired transient and steady-state performance. By …

Time-Marching Quantum Algorithm For Simulation Of Nonlinear Lorenz Dynamics, Efstratios Koukoutsis, George Vahala, Min Soe, Kyriakos Hizanidis, Linda Vahala, Abhay K. Ram

Electrical & Computer Engineering Faculty Publications

Simulating nonlinear classical dynamics on a quantum computer is an inherently challenging task due to the linear operator formulation of quantum mechanics. In this work, we provide a systematic approach to alleviate this difficulty by developing an explicit quantum algorithm that implements the time evolution of a second-order time-discretized version of the Lorenz model. The Lorenz model is a celebrated system of nonlinear ordinary differential equations that has been extensively studied in the contexts of climate science, fluid dynamics, and chaos theory. Our algorithm possesses a recursive structure and requires only a linear number of copies of the initial state …

Development Of 2d Microfluidics Surface With Low-Frequency Electric Fields For Cell Separation Applications, Madushan Wickramasinghe, Dharmakeerthi Nawarathna

Electrical & Computer Engineering Faculty Publications

Cell separation techniques are widely used in many biomedical and clinical applications for the development of screening, diagnosis and therapeutic tests. Current 3D microfluidics-based cell separation methods have limited applications in part due to low throughput and technical complexity. To address these critical needs, we have developed a 2D microfluidics surface which is the miniaturized version of a 3D microfluids cell separation device. Using low-frequency electric fields (1–10 Vpp and 1 kHz–20 MHz), we have first studied dielectrophoresis, AC electro-osmosis and capillary flow within a sessile drop, and finally utilized the results to develop the 2D cell separation surface. Our …

Energy-Aware Swarm Robotics In Smart Microgrids Using Quantum-Inspired Reinforcement Learning, Mohamed Shili, Salah Hammedi, Hicham Chaoui, Khaled Nouri

Electrical & Computer Engineering Faculty Publications

The integration of autonomous robots with intelligent electrical systems introduces complex energy management challenges, particularly as microgrids increasingly incorporate renewable energy sources and storage devices in widely distributed environments. This study proposes a quantum-inspired multi-agent reinforcement learning (QI-MARL) framework for energy-aware swarm coordination in smart microgrids. Each robot functions as an intelligent agent capable of performing multiple tasks within dynamic domestic and industrial environments while optimizing energy utilization. The quantum-inspired mechanism enhances adaptability by enabling probabilistic decision-making, allowing both robots and microgrid nodes to self-organize based on task demands, battery states, and real-time energy availability. Comparative experiments across 1500 grid-based …

Energy-Aware Sensor Fusion Architecture For Autonomous Channel Robot Navigation In Constrained Environments, Mohamed Shili, Hicham Chaoui, Khaled Nouri

Electrical & Computer Engineering Faculty Publications

Navigating autonomous robots in confined channels is inherently challenging due to limited space, dynamic obstacles, and energy constraints. Existing sensor fusion strategies often consume excessive power because all sensors remain active regardless of environmental conditions. This paper presents an energy-aware adaptive sensor fusion framework for channel robots that deploys RGB cameras, laser range finders, and IMU sensors according to environmental complexity. Sensor data are fused using an adaptive Extended Kalman Filter (EKF), which selectively integrates multi-sensor information to maintain high navigation accuracy while minimizing energy consumption. An energy management module dynamically adjusts sensor activation and computational load, enabling significant reductions …

Flux-Weakening Control Methods For Permanent Magnet Synchronous Machines In Electric Vehicles At High Speed, Samer Alwaqfi, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Permanent magnet synchronous motors (PMSMs) are widely favored by manufacturers for use in electric vehicles (EVs) because of their many benefits, which include high power density at high speeds, ruggedness, potential for high efficiency, and reduced control complexity. However, since the Back Electromotive Force (EMF) increases proportionally with the motor’s rotational speed, it must be carefully controlled at high speeds. Flux-weakening (FW) control is required to avoid excessive electromagnetic flux beyond the power source and inverter’s voltage restrictions. This paper aims to compare various FW control strategies and analyze their effectiveness in maximizing the speed of PMSMs in EV applications …

Advances In Battery Modeling And Management Systems: A Comprehensive Review Of Techniques, Challenges, And Future Perspectives, Seyed Saeed Madani, Yasmin Shabeer, Ananthu Shibu Nair, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, Shi Xue Dou, Khay See, Saad Mekhilef, Françios Allard

Electrical & Computer Engineering Faculty Publications

Energy storage systems (ESSs) and electric vehicle (EV) batteries depend on battery management systems (BMSs) for their longevity, safety, and effectiveness. Battery modeling is crucial to the operation of BMSs, as it enhances temperature control, fault detection, and state estimation, thereby maximizing efficiency and preventing malfunctions. This paper thoroughly examines the most recent advancements in battery and BMS modeling, including data-driven, thermal, and electrochemical methods. Advanced modeling approaches are explored, including physics-based models that incorporate mechanical stress and aging effects, as well as artificial intelligence (AI)-driven state estimation. New technologies that facilitate data-driven decision-making, real-time monitoring, and simplified systems include …

Novel Micro-And Nanoformulations Of Paclitaxel For Targeting Metastatic Breast, Non-Small Cell Lung, And Pancreatic Cancers, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nonlinear pharmacokinetics resulting from high lipophilic and low oral bioavailability, and hypersensitivity reactions and hyperlipidemia caused by formulation by Cremophor EL have limited clinical effectiveness of paclitaxel (Taxol). In this way, there is the critical necessity of innovative drug delivery systems (DDSs) to mitigate severe side effects and overcome clinical limitations of paclitaxel. In recent years, various micro- and nanoformulations, specifically polymeric nanoparticles (NPs) and lipid NPs, have been presented and approved by the Food and Drug Administration (FDA). In addition, other nanoformulations, such as polymeric nanoparticles (NPs), micelles, liposomes, and mesoporous silica nanoparticles, have shown promising results in vitro …

The Effect Of Electrode Geometry On Excited Species Production In Atmospheric Pressure Air-Hydrogen Streamer Discharge, Shirshak Kumar Dhali, Stuart Reyes

Electrical & Computer Engineering Faculty Publications

When a gas is overvolted at or near atmospheric pressure, it results in a streamer discharge formation. Electrode geometries exert significant impact on the electrical breakdown of gases by altering the spatial profile of the electric field. In many applications the efficient generation of radicals is critical and is determined by the characteristics of the streamer discharge. We examine the effect of electrode geometry on the streamer characteristics and the production of radicals. This is performed for three different electrode geometries: plane–plane, pin–plane, and pin–pin. A two-dimensional rotationally symmetric fluid model is used for the streamer discharge simulation in the …

Quantifying Trapped Magnetic Vortex Losses In Niobium Resonators At Mk Temperatures, D. Bafia, B. Abdisatarov, R. Pilipenko, Y. Lu, G. Eremeev, A. Romanenko, A. Grassellino

Electrical & Computer Engineering Faculty Publications

Trapped magnetic vortices in niobium introduce microwave losses that degrade the performance of superconducting resonators. While such losses have been extensively studied above 1 K, we report here their direct quantification in the millikelvin and low-photon regime relevant to quantum devices. Using a high-quality factor 3D niobium cavity cooled through its superconducting transition in controlled magnetic fields, we isolate vortex-induced losses and find the resistive component of the sensitivity to trapped flux S to be approximately 2 n Ω/mG at 10 mK and 6 GHz. The decay rate is initially dominated by two-level system (TLS) losses from the native niobium …

The Effect Of Electrode Geometry On Excited Species Production In Atmospheric Pressure Air–Hydrogen Streamer Discharge, Shirshak Kumar Dhali, Stuart Reyes

Electrical & Computer Engineering Faculty Publications

When a gas is overvolted at or near atmospheric pressure, it results in a streamer discharge formation. Electrode geometries exert significant impact on the electrical breakdown of gases by altering the spatial profile of the electric field. In many applications the efficient generation of radicals is critical and is determined by the characteristics of the streamer discharge. We examine the effect of electrode geometry on the streamer characteristics and the production of radicals. This is performed for three different electrode geometries: plane–plane, pin–plane, and pin–pin. A two-dimensional rotationally symmetric fluid model is used for the streamer discharge simulation in the …

Cellax Nanoparticles: Taxane Nanoformulations For Solid Tumor Targeting, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nanoparticles (NPs), specifically polymer-modified NPs, have illustrated unique therapeutic advantages compared to bulk materials. Cellax NPs have provided a promising approach to cancer therapy by improving drug delivery, targeting the tumor microenvironment, and potentially overcoming drug resistance, all while reducing overall toxicity compared to traditional taxane treatment. By the flash nanoprecipitation (FNP) method, docetaxel and cabazitaxel have been formulated with polyethylene glycol (PEG) modified-acetylated carboxymethylcellulose (CMC) polymer to increase biocompatibility, bioavailability, specific targeting, and modulate the tumor microenvironment. However, there are some challenges and clinical limitations related to this formulation, encompassing optimum targeted delivery to tumors, overcoming biological barriers, such …

Ai-Based Steganography Method To Enhance The Information Security Of Hidden Messages In Digital Images, Nhi Do Ngoc Huynh, Jiajun Jiang, Chung-Hao Chen, Wen-Chao Yang

Electrical & Computer Engineering Faculty Publications

With the increasing sophistication of Artificial Intelligence (AI), traditional digital steganography methods face a growing risk of being detected and compromised. Adversarial attacks, in particular, pose a significant threat to the security and robustness of hidden information. To address these challenges, this paper proposes a novel AI-based steganography framework designed to enhance the security of concealed messages within digital images. Our approach introduces a multi-stage embedding process that utilizes a sequence of encoder models, including a base encoder, a residual encoder, and a dense encoder, to create a more complex and secure hiding environment. To further improve robustness, we integrate …

Enhancing Channel Data Savings And Information Transfer Efficiency In Ultrasound Imaging, Sai Konda, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Ultrasound is a popular imaging technique mainly due to its non-invasive nature. And so, it is being used in a variety of applications. Due to plane wave imaging technique in ultrasound, frame rate of ultrasound imaging has the potential for being very high. Due to which, many channel data frames are being generated within a few seconds. As a result, tasks such as storing data frames and transferring them from front end ultrasonic system to processing computers are presenting significant challenges. Our current research work minimized these issues. We proposed and implemented: (a) Data encoding technique - We combined every …

Input Independent Observers For Bilinear Systems Using Convex Optimization, M. Aminul Haq, W. Steven Gray

Electrical & Computer Engineering Faculty Publications

An asymptotic state variable observer is proposed for a continuous-time bilinear dynamical system with the distinguishing feature that the error dynamics are globally asymptotically stable and independent of the applied input. Only the speed of convergence of the error dynamics may be input dependent. The approach is to apply classical Lyapunov stability theory using a convex optimization algorithm and linear matrix inequality (LMI) tools to in effect isolate the stability property of the error dynamics from the input. The LMIs are used to turn the nonconvex problem into a convex problem. The method is demonstrated on an induction motor drive.

Quantum Efficiency, Electron Spin Polarization And Lifetime Study For Gaas Based Truncated Nanocone Array Photocathodes, Md. Aziz Ar Rahman, Greg Blume, Md Abdullah Mamun, Shukui Zhang, Hani Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

[First slide] Direct band-gap photocathode (Eg = 1.42 eV).

Valence band maximum (VBM) is doubly degenerate, Max. electron spin polarization (ESP) ~35-40%.

Strained-supperlattice (SSL) removed the VBM degeneracy, ESP ~85-90% with QE of ~1% at 780 nm.

Requires UHV: Lifetime ~200 C with ~200 μA beam current.

Ion-back bombardment degrades the lifetime.

Improvement in charge lifetime required for JLAB polarized positron source program: 1mA-10mA beam current for 2 weeks ~ 10³10⁴C.

Antennas For Emerging Satellite Services, Jakub Przepiorowski

Doctoral

The NewSpace era has revolutionized access to space, driving advancements in satellite communication (SATCOM) systems and creating demand for low-cost, compact, and high-performance user terminals. This thesis addresses these needs by developing innovative antenna solutions tailored for user terminals designed for emerging satellite constellations and satellite Internet-of-Things (S-IoT) applications.

Drop Dynamics During Condensation On Superhydrophobic Surfaces In Vapor Shear Flow, Shaur Humayun, R. Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

Accurate models for predicting drop dynamics, such as maximum drop departure sizes, are crucial for estimating heat transfer rates during condensation on superhydrophobic (SH) surfaces. Previous studies have focused on examining the heat transfer rates for SH surfaces under the influence of gravity or vapor flowing over the surface. This study investigates the impact of surface solid fraction and texture scale on drop mobility in a condensing environment with a humid air flow. Experiments recorded condensation with varying surface feature sizes from micro- to nano scale under different flow rates. Video analysis detected the drop-size distribution and maximum drop departure …

Actuator Disk Model For Aeropropulsive Coupling Effects In Vortex Particle Method, Eduardo Alvarez, Vineet Ahuja, Vinod Lakshminarayan, Aaron Perry, Ryan Anderson, Andrew Ning

Faculty Publications

Blown lift and distributed electric propulsion aircraft pose strong aeropropulsive coupling effects that cannot be ignored during the early stages of design. In this study, we develop an advanced actuator disk model (ADM) for aeropropulsive coupling effects of ducted fans with the vortex particle method (VPM). The advanced ADM consists of (1) an actuator disk at the rotor plane, (2) a surface vortex sheet modeling the mixing and convection of blade tip vorticity along walls, and (3) a powered wake at the exhaust. With these three components, a propulsion jet with an arbitrary velocity profile is formed and interactions with …

Précis Of The Edge Of Sentience: Risk And Precaution In Humans, Other Animals, And Ai, Jonathan Birch

Animal Sentience

We often face grave practical decisions that seem to hinge on whether a system is sentient. This family of cases includes invertebrate animals, people who are unresponsive after brain injury, fetuses, neural organoids, and now AI technologies. We must decide what to do despite ongoing disagreement about the nature of sentience. In our state of uncertainty, we should pragmatically transform the question from “Is it sentient?” to “Is it a sentience candidate, an investigation priority, or neither?”. When a system is a sentience candidate, it is negligent to fail to consider precautions. We should instead evaluate precautions for their proportionality …