Civil Engineering Commons^™

An Inexpensive, Reproducible Method To Quantify Activated Sludge Foaming Potential: Validation Through Lab-Scale Studies And Year-Long Full-Scale Sampling Campaign, Grace K. Scarim, Emily Lou Lamartina, Kaushik Venkiteshwaran, Daniel Zitomer, Ryan J. Newton, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Activated sludge is a conventional treatment process for biochemical oxygen demand (BOD) and total suspended solids (TSS) removal at water resource recovery facilities (WRRFs). Foaming events are a common operational issue in activated sludge and can lead to decreased treatment efficiency, maintenance issues, and potential environmental health risks. Stable foaming events are caused by biological and chemical drivers (i.e., microbes and surfactants) during the aeration process. However, foaming events are difficult to predict and quantify. We present an inexpensive and easy-to-use method that can be applied at WRRFs to quantify foaming potential. Subsequently, the method was applied over a year-long …

Serviceability Analysis And Feasibility Study Of Rooftop Pv System On Commercial Buildings In New York City, Daniel A. Shedo

Master's Theses

Concrete Masonry Unit (CMU) blocks (Ballasts) to counterbalance an uplift wind pressure on Photovoltaic (PV) panels have been used widely. In contrast to mechanically attaching PV panels through penetration of a roof slab, the use of CMU blocks is preferred by many building owners, as penetrating and attaching the panels to a roof slab will pose a serious threat to the warranty of roof membranes, which typically last for 30 years. On the other hand, placing CMU blocks along with PV panels and other system components on a rooftop slab adds additional dead load, which may raise a concern regarding …

Load Rating Evaluation Of Deteriorated Prestressed Channel Girders, Alexander Zane Henderson

Theses and Dissertations

The South Carolina Department of Transportation (SCDOT) is conducting a multi-year effort to load rate its inventory of over 9,400 bridges. This includes many bridges that are load posted due to potential structural considerations (e.g., outdated design loads, members whose capacity is difficult to assess, structural degradation). The number of load-posted bridges in South Carolina is expected to increase significantly due to recent efforts from SCDOT to assess the current state of bridge infrastructure. It is expected that the increased scrutiny may result in more load postings, which in turn may lead to restrictions on truck routes, potential bridge closures, …

Speckle Development And Application In Uav-Based Digital Image Correlation For Transportation Infrastructure Monitoring And Assessment, Taylor Wyatt

Theses and Dissertations

A critical aspect of civil infrastructure is structural health monitoring, of which digital image correlation (DIC) has been proven to be an effective and appropriate method. There is sufficient literature on the use of stationary DIC, but an unexplored aspect is DIC-equipped unmanned aircraft systems. It has been verified in University of South Carolina labs but has not been proved in a field environment. One of the challenges of field implementation is large scale speckle application. This work focusses on identifying and addressing challenges in bringing UAV-DIC technology from the lab to the field. This includes the development of optimized …

Peak And Differential Temperature Determination Of Drilled Shafts, Amanda A. Lewis

USF Tampa Graduate Theses and Dissertations

The term “mass concrete” characterizes a specific concrete condition that typically requires unique considerations to mitigate extreme temperature effects on a structure. Mass concrete has historically been defined by the physical dimensions of a “mass”-ive concrete element with the intent of identifying when differential temperatures may induce early-onset cracking, leading to reduced service life. More recently, in addition to differential temperature considerations, extreme upper temperature limits have been imposed by the American Concrete Institute to prevent long-term concrete degradation. Studies dating back to 2007 show shafts as small as 48 inches in diameter can exceed both differential and peak temperature …

Physics-Based Crystal Plasticity Model For Predicting Microstructure Evolution And Dislocation Densities, Juyoung Jeong

LSU Doctoral Dissertations

This work presents three different studies investigating plastic deformation mechanisms in metals and alloys using crystal plasticity finite element (CPFE) modeling. The first study presents a new nonlocal crystal plasticity model for face-centered cubic single crystals under heterogeneous inelastic deformation. The model incorporates generalized constitutive relations that incorporate the thermally activated and drag mechanisms to cover different kinetics of viscoplastic flow in metals and describes the plastic flow and yielding of single-crystals using dislocation densities. The model is compared to micropillar compression experiments for copper single crystals and clarifies the complex microstructural evolution of dislocation densities in metals. The second …

Analytical Method For Predicting Lateral Facing Deflection Of Geosynthetic-Reinforced Soil Abutment Walls, Thang Pham, S. Mustapha Rahmaninezhad, Andres Palma, Truc Phan, Thuy Vu

Civil Engineering Faculty Publications

Geosynthetic-reinforced soil (GRS) walls have been recently used as bridge abutments to directly support spread footings on the reinforced soil mass. This application reduces the requirement for using traditional deep foundations, such as piles or drilled shafts, to support bridge beams. GRS abutment walls are generally subjected to high footing loads that are close to the wall facing. Although GRS abutment walls with modular block facing have been the subject of a number of studies, there are limited methods to predict the profile of the lateral facing deflections along the height of the GRS abutment walls. Lateral deflections along the …

Port-Of-Entry Simulation Model For Potential Wait Time Reduction And Air Quality Improvement: A Case Study At The Gateway International Bridge In Brownsville, Texas, Usa, Benjamin Stewart, Hiram Moya, Amit U. Raysoni, Esmeralda Mendez, Matthew Vechione

Civil Engineering Faculty Publications and Presentations

The mathematical study known as queueing theory has recently become a major point of interest for many government agencies and private companies for increasing efficiency. One such application is vehicle queueing at an international port-of-entry (POE). When queueing, fumes from idling vehicles negatively affect the overall health and well-being of the community, especially the U.S. Customs and Border Protection (CBP) agents that work at the POEs. As such, there is a need to analyze and optimize the border crossing queuing operations to minimize wait times and number of vehicles in the queue and, thus, reduce the vehicle emissions. For this …

Adiabatic Temperature Rise And Durability Performance Of Slag Blended Concrete, Hai Zhu

USF Tampa Graduate Theses and Dissertations

Performance and durability of slag blended concrete was investigated in this study focusing on slag and cement characteristics. Seven slags with variable Al2O3 content, Al2O3/MgO ratio and fineness were selected for investigation. The eight selected cements included ASTM Type I, Type I(HA), Type II(MH), Type II(MH)(HA), and Type IL(10 and 14). Cementitious materials studied here were subjected to a battery of tests including physical, chemical and mineralogical characterization. Performance and durability testing included heat of hydration measurements, sulfate optimization, external sulfate resistance, adiabatic temperature rise and chloride ingress.

Adiabatic temperature rise was assessed on 60% slag blended concrete, using Type …

The Intersection Of Utility Coordination And Sue, Natalie Parks, Ken Kerr

Purdue Road School

ASCE recently released two new SUE standards—ASCE 38-22 is the updated SUE standard commonly used during the utility coordination process during design, and ASCE 75-22 is the new utility as-built standard that is essential for the accurate location of newly relocated facilities in construction. This presentation will illustrate the interaction and relationship between SUE and utility coordination to enhance project deliverables and reduce risk during construction.

Alternative Delivery: Beyond Design-Build, Steve Davidson, William Stringer

Purdue Road School

Owners are facing increased pressure to deliver major infrastructure projects in a timely and cost-efficient manner. Pain from inflation and labor/material short- ages are felt nationwide. To maximize limited budgets, owners are exploring alternative delivery methods. Attendees will learn about the benefits and pitfalls of progressive design-build (PDB) and construction manager/general contractor (CM/GC). Presenters will share best practices for determining if PDB and CM/GC are appropriate for your project and provide case study examples.

Environmental Assessments On A Local Project, Robert Winebrinner, Trevor Wieseke, Summer R. Elmore, Alison Krupski, Mike Maurovich

Purdue Road School

This presentation will go through the environmental process of a recent $125M local project within Noblesville. What are the major differences between the National Environmental Policy Act (NEPA) and State Environmental Policy Act (SEPA) process as it relates to an environmental assessment (EA)? What is required, what is not required, and what is optional? How long does the process take? Join us as we walk through this exciting process and experience.

Design, Collaborate, Thrive: The Broad Ripple Avenue Project, Jessica Hawley, Emily Nelson, Ericka Miller

Purdue Road School

Broad Ripple Avenue (College Avenue to Winthrop Avenue) needed large-scale stormwater improvements. With the help of the Lochmueller Group and the Broad Ripple Village Association, Indianapolis DPW perceptively took this opportunity to also improve pedestrian facilities and regional multi-modal connectivity by combining multiple regional projects into one construction contract. This consolidation allowed for a cohesive public message through proactive public involvement. Presenters will share how consensus was built between invested parties through a successful public and private partnership.

Evansville Airport Terminal And Passenger Access, Jamin Heldt, Nate Hahn

Purdue Road School

The Evansville Airport has completely updated the terminal area and passenger access to the terminal. A plan is underway to expand the passenger parking area in the future. This presentation will review the past updates and walk through future goals.

South Bend Airport Tw B Realignment And Apron Project, Lisa Kinsman, Patrick Mac Carthaigh, Jeff Thoman, Ashley Thorsen

Purdue Road School

South Bend Airport is in the process of a major reconstruction project to realign Taxiway B to provide a Runway Incursion Mitigation (RIM), separate Taxiway B from the Terminal Apron, and make adjustments to the terminal apron to correct drainage. This presentation will provide a full review of the project.

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

Planning For Pedestrians And Bicyclists During Construction Projects, John Habermann, P.E.

Purdue Road School

This session will explore how the Texas Department of Transportation Waco District addressed pedestrian/bicyclist safety and mobility during a multi-year construction project along I-35. This presentation will demonstrate the value of online tools, field implementations, and data collection. Attendees will learn the value of assembling a stakeholder steering committee; counting pedestrian and bicyclists before, during, and after construction; effectively using pavement clings; and using a webpage dedicated to pedestrian/bicyclist updates.

Interstate Highway Congestion Policy Request: When And How, Douglas Homan, Alan Holderread, Michelle Witkowski

Purdue Road School

This session will highlight current IHCP tables, policy tables, request templates, analysis tools, INDOT queue analysis spreadsheet, INDOT detour route summary spreadsheet, hourly day-of-the-week con- version factors, additional modeling efforts, common and repeated mistakes, IHCP exception checklist, and example projects.

Economic Development And Infrastructure, Gary J. Pool

Purdue Road School

This presentation will cover how the developments on the Olio Road Corridor have affected Hancock County’s roadway deterioration and construction, revenue and funding, and public involvement.

Pedestrian Maintenance Of Traffic For Designers, Katherine Smutzer

Purdue Road School

This presentation with summarize current guidance being developed for the maintenance of pedestrian traffic during construction. The presentation will provide designers with guidance on INDOT’s decision-making hierarchy and expectations related to the documentation and development of pedestrian maintenance of traffic plans.

See A Sign? Make A Call, John Habermann, P.E.

Purdue Road School

DOT staff and technology resources have the proven potential to help combat human trafficking if DOT employees know the indicators of human trafficking and how to cooperate with requests from agencies for information that can be derived from DOT assets. The Texas A&M Transportation Institute, NCHRP, and the Heart of Texas Human Trafficking Coalition will discuss the intersection of human trafficking with the transportation sector. Attendees will also learn the main components of human trafficking, the basic signs of human trafficking on DOT facilities, and resources to use in their own states.

Full-Scale Testing Of Power Transfer Roadways, Oscar Moncada

Purdue Road School

A dynamic wireless power transfer roadway refers to the integration of wireless power transfer technology into a new and existing road infrastructure to provide motive power, battery charging, or both to electric vehicles. The objective of this presentation is to evaluate the mechanical and thermal performance of the system when incorporated in both flexible and rigid pavement structures.

Flood Risk Data For Highway Projects, Nabil Ghalayini

Purdue Road School

This presentation will provide project managers and engineers with a clear understanding of available FEMA Risk MAP flood hazard data to better inform project design. This presentation will broadly define flood risk, review the FEMA flood risk database as a source of risk parameters, contrast the regulatory Special Flood Hazard Area (SFHA) with Risk MAP depth and probability grids, and highlight the variability of risk within the SFHA.

Uncertainty Quantification And Fragility Development Of Deteriorating Rc Bridge Piers, Ayush Bhandari

Dissertations and Theses

Corrosion can reduce structural capacity and increase the risk of bridge damage/failure under extreme events. The impact of corrosion on seismic fragility of bridges has been well studied. However, the methodology used in most existing studies requires detailed information on the structural design and condition of a bridge, which is a major hindrance in conducting seismic risk assessment for a large population of bridges. Furthermore, existing studies do not adequately address the time-dependency of uncertainties associated with fragility curve development. This study presents a methodology to generate time-dependent seismic fragility curves for deteriorating highway bridges based only on the limited …

Midwest Roadside Safety Facility Expansion For Enhanced Research Capabilities, Joseph (Lj) Hajduch, Isaac Hansen, Jeff Schroeder, Hozhin Sleman, Ben Wortman

Honors Program: Senior Projects (Public)

As Civil Engineering students, this group was tasked with designing and proposing an engineering solution to a real-world problem. In this case, the Midwest Roadside Safety Facility in Lincoln, Nebraska was looking for a planned proposal to add an additional building to their property for the purpose of additional research and office space. The group decided on the name Zana Engineering – Zana translating to “highly educated” in Kurmanji – to function as the organization responsible for creating this proposal and presentation. Zana Engineering designed this plan on several key factors, most significantly utility, affordability, safety, sustainability, functionality, longevity, and …

The Influence Of Corrosion Mitigating Fluids On Post Tensioned Tendon Grout Properties And Steel To Grout Bond Strength, Sarita Ale Magar

USF Tampa Graduate Theses and Dissertations

Corrosion has been a persistent problem causing the failure of post-tensioned tendons in segmentally constructed bridges. To address this issue, the impregnation method has been considered where the corrosion-mitigating fluids are pressure injected into the interstitial spaces between the seven wires of steel strands. A previous study showed that this method was able to arrest corrosion. However, it compromised the bond strength between the steel and the strand. For that reason, this study aims to identify a fluid that can be impregnated into the interstitial spaces without sacrificing bond performance. The most promising fluid found in the study is an …

The Influence Of Bipolar Electrochemical Cell Geometry On The Studies Of Pitting Corrosion, Amin Kazem Ghamsari

USF Tampa Graduate Theses and Dissertations

Bipolar electrochemistry (BPE) is a technique that provides a wireless alternative totraditional electrochemistry to elicit redox reactions. It has been utilized in different applications, including studying localized corrosion, gradient electrodeposition, propulsion of micromotors, and water treatment. The popularity of the method is not solely dependent on its wirelessness but more due to the simultaneous presence of cathodic and anodic poles on the same surface, which also begets its name as bipolar. The concept of the method is based on the polarization of conductive objects in an electric field in the presence of an electrolyte. In BPE, instead of controlling the …

Optimizing Locations And Sizes Of Asphalt Concrete Plants In Karbala, Iraq, Ghayath Ali, Sawsan R Mohammad, Alaa M. Abdulhussein

Al-Bahir

This study develops and presents a methodology for determining the optimal geographic distribution and size of asphalt concrete plants in Karbala, Iraq, in order to minimize the cost of asphalt concrete produced. The purpose of this study is to discuss these points. The methodology can identify potential locations for asphalt concrete plants within a study area, considering the plants' operation and capital costs and the costs of transporting raw materials to the plants and asphalt concrete to demand centers. Matrix Laboratory (MATLAB) software have been used to program the methodology. This methodology has been applied to Karbala using actual data. …

Rehabilitation Technologies To Abate Infiltration In Sanitary Sewers, Steve Youssef

USF Tampa Graduate Theses and Dissertations

In urban coastal environments, sewer infrastructure is plagued by infiltration which seeps into aging and compromised pipes. Infiltration increases pumping costs, reduces treatment efficiency, and may trigger release of partially treated wastewater at water reclamation facilities. To restore pipes and abate infiltration, local utilities rely on structural and non-structural trenchless rehabilitation technologies. These methods are commonly used throughout the United States and the world due to their numerous benefits compared to traditional open-cut construction. However, limited data is available regarding their efficacy in reducing infiltration in sewer systems. In this study, we analysed infiltration in a small urban sewershed in …

Building Services Engineering March/April 2023

Building Services Engineering

No abstract provided.