Open Access. Powered by Scholars. Published by Universities.®

Civil Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Discipline
Institution
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 506

Full-Text Articles in Civil Engineering

Remote Vibration Based Monitoring Of Bridge Scour, Alan Kazemian Jun 2024

Remote Vibration Based Monitoring Of Bridge Scour, Alan Kazemian

Dissertations

The gradual erosion of the sediment around a bridge foundation is called Scour. This erosion is caused by water flow and increases during times of high-water flow such as flooding. The scour leaves the bridges structurally unsound over time and jeopardizes the safety of the structure. Approximately 60 percent of bridge failures in the United States are caused by scour. A variety of types of devices have been used to detect scour. Most of these devices only observe the scour and not the structural integrity of the bridge. The typical approach has relied on visual inspections of the bridges after …


Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr. May 2024

Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr.

Publications and Research

Ensuring the safety and longevity of structures is paramount in concrete construction projects. Cases like the Big Dig ceiling collapse, which occurred on July 10, 2006, when a concrete ceiling panel measuring 20' x 40' and debris weighing 26 short tons (52,000 lb) fell within Boston's Fort Point Channel Tunnel, underscore this importance (Wald, M. L., 2007). Quality Assurance (QA) and Quality Control (QC) are crucial in mitigating such risks. QA ensures that materials and methods meet predetermined performance, design, and reliability standards specified in contracts and customer arrangements. On the other hand, QC is a strategic process businesses use …


Final Design Of Legion Hall Revitalization In Potter, Nebraska, Madison Brennfoerder May 2024

Final Design Of Legion Hall Revitalization In Potter, Nebraska, Madison Brennfoerder

Honors Program: Senior Projects (Public)

This project was conducted to renovate and revitalize the Legion Hall community center in the Village of Potter located in western Nebraska north of the Interstate. The work completed for this project can be separated into five disciplines: Hydrologic & Hydraulic Design, Geotechnical Analysis, Structural Analysis, Environmental Analysis, and Transportation Design. Legion Hall is a historical building within The Village of Potter which was built in 1917. The Village of Potter has recently acquired the rights to the hall and is seeking to revitalize the historical community center to increase tourism in the village.


The Game Of Traffic Lights (Tgotl), Faith Chapman Apr 2024

The Game Of Traffic Lights (Tgotl), Faith Chapman

Posters - 2024

“Computer Science can be applied to nearly ANY field.” In college, and high school especially, the phrase is just that—early comp. sci (CS) students don’t have realworld examples of how/where else they can use CS knowledge outside of CS focused jobs. For high school students, this a missed opportunity to plan for a career outside the obvious. One such career is in traffic lights.

U.S. traffic can be better. Engineering has a subfield dedicated to improving traffic, and part of that entails studying ways to improve traffic lights’ efficacy. Someone with CS knowledge can program a traffic simulator for data …


Digitalization Of Railway Transportation Through Ai-Powered Services: Digital Twin Trains, Salih Sarp, Murat Kuzlu, Vukica Jovanovic, Zekeriya Polat, Ozgur Guler Jan 2024

Digitalization Of Railway Transportation Through Ai-Powered Services: Digital Twin Trains, Salih Sarp, Murat Kuzlu, Vukica Jovanovic, Zekeriya Polat, Ozgur Guler

Engineering Technology Faculty Publications

Digitalization is a key concept that transformed the various industries through technologies like Internet of Things (IoT), Artificial Intelligence (AI), and Digital Twin (DT). Although innovations provided by the advancement of digitalization have paved the way for more efficient operations and products for transportation, the rail transportation sector struggles to keep up with the rest of the transportation industry, since trains are designed to last for decades, and the insufficient infrastructure investment leads to multiple railroad derailments across the globe. Therefore, the primary aim is to transform current railway systems into human-centric, adaptable, sustainable and future-proof networks, aligning with Industry …


Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna Nov 2023

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …


International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon Nov 2023

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …


Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell Nov 2023

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …


Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke Nov 2023

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …


Industry Colloquium Report, Robert Moore Sep 2023

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …


Bond-Breaker Properties Of Different Media For Concrete Pavement Design, Andres Calzacorta May 2023

Bond-Breaker Properties Of Different Media For Concrete Pavement Design, Andres Calzacorta

Graduate Theses and Dissertations

Currently Arkansas requires a layer of asphalt as the main bond-breaker over cement treated base for rigid pavement design. The study presented in this paper aims to replicate the results from previous research which demonstrated the bond-breaker properties of concrete curing compounds and geotextiles. Bond-breakers are materials applied to the surface of stabilized bases to reduce the interaction between the base and a pavement cement concrete layer. The excessive interaction between these two layers can lead to cracking in the overlay and reduction of the serviceability life of concrete. The curing compound was applied in a single application (SA, 200 …


Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis Dec 2022

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …


Building Services Engineering January/February 2022 Jan 2022

Building Services Engineering January/February 2022

Building Services Engineering

No abstract provided.


Building Services Engineering November/December 2021 Nov 2021

Building Services Engineering November/December 2021

Building Services Engineering

No abstract provided.


Building Services Engineering September/October 2021 Sep 2021

Building Services Engineering September/October 2021

Building Services Engineering

No abstract provided.


Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban Jul 2021

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …


Building Services Engineering July/August 2021 Jul 2021

Building Services Engineering July/August 2021

Building Services Engineering

No abstract provided.


Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner Jun 2021

Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner

Architectural Engineering

Journeyman International is a non-profit organization that works with countries all over the world to support humanitarian projects by pairing clients with design professionals and volunteers to oversee the design and construction of projects. This specific project partners with Third Lens Ministries and But God Ministries, two organizations that are hoping to empower the community in Jonestown, Mississippi. Dwell Being promotes sustainability and affordable housing in a new housing community in Jonestown that is designed for healthy living and community interaction. Jonestown is a very small 0.4 square acre town that has roots in systemic racism and oppression. A once …


Meta-Network Analysis Of Complex Construction Systems: Improving Project Efficiency Using Novel Computer-Based Analytic Methodology, Ethan Cummiskey May 2021

Meta-Network Analysis Of Complex Construction Systems: Improving Project Efficiency Using Novel Computer-Based Analytic Methodology, Ethan Cummiskey

Honors Scholar Theses

The objective of this study is to build upon the framework of a meta-network approach to assessing vulnerabilities in construction projects. By viewing these complex environments as configurations of various nodes and links, it is possible to show the relationship between each entity in the project and the overall completion that is achieved from these connections. To expand upon previous studies, the vulnerabilities measured from this approach will be used to optimize the current network to eliminate any shortcoming in the project model. By investigating the congruence of different agents on the project, resources and informational nodes can be supplied …


Building Services Engineering May/June 2021 May 2021

Building Services Engineering May/June 2021

Building Services Engineering

No abstract provided.


Quantifying Surface Morphology Of Manufactured Activated Carbon And The Waste Coffee Grounds Using The Getis-Ord-Gi* Statistic And Ripley’S K Function, Sanghoon Lee, Sukjoon Na, Olivia G. Rogers, Sungmin Youn Apr 2021

Quantifying Surface Morphology Of Manufactured Activated Carbon And The Waste Coffee Grounds Using The Getis-Ord-Gi* Statistic And Ripley’S K Function, Sanghoon Lee, Sukjoon Na, Olivia G. Rogers, Sungmin Youn

All Engineering Faculty Research

Activated carbon can be manufactured from waste coffee grounds via physical and/or chemical activation processes. However, challenges remain to quantify the differences in surface morphology between manufactured activated carbon granules and the waste coffee grounds. This paper presents a novel quantitative method to determine the quality of the physical and chemical activation processes performed in the presence of intensity inhomogeneity and identify surface characteristics of manufactured activated carbon granules and the waste coffee grounds. The spatial density was calculated by the Getis-Ord-Gi* statistic in scanning electron microscopy images. The spatial characteristics were determined by analyzing Ripley’s K function and complete …


Bs News March/April Mar 2021

Bs News March/April

Building Services Engineering

No abstract provided.


The Life Of A Roundabout In Colorado Springs, Alexis M. Yoder Jan 2021

The Life Of A Roundabout In Colorado Springs, Alexis M. Yoder

Williams Honors College, Honors Research Projects

Colorado Springs is an up-and-coming area where many people have decided to move to for multiple opportunities. With more people, comes more traffic flow and unfortunately, more accidents. Throughout the state, there is a large attempt to lower accidents, especially at intersections. One type of intersection that can be of great benefit is the roundabout. In fact, Colorado was an early adapter of the roundabout in order to improve traffic flow and decrease fatal accident statistics. When designing a roundabout, although good intentions are planned, complications can still arise. In most scenarios, roundabouts are able to reduce the number of …


Building Services Engineering January/February Jan 2021

Building Services Engineering January/February

Building Services Engineering

No abstract provided.


Bs News November/December Nov 2020

Bs News November/December

Building Services Engineering

No abstract provided.


Retrospective Analysis Of Participatory Decision-Making In A Park's Construction In Lafayette, Indiana, Joshua Randall Oct 2020

Retrospective Analysis Of Participatory Decision-Making In A Park's Construction In Lafayette, Indiana, Joshua Randall

Purdue Journal of Service-Learning and International Engagement

The Creative Park project has been an ongoing collaboration between Purdue Engineering Projects in Community Service (EPICS), Faith Community Development Corporation, and the residents of Lincoln Neighborhood in Lafayette, Indiana. It was initiated by Faith in 2017 as an open-ended attempt to increase local children’s interactions with creative and complex thinking as well as decreasing time spent indoors at the Hartford Hub. Through several iterations of designs, an interdisciplinary team with one consistent member has developed a plan to build a treehouse-themed park to be constructed in spring 2020. Throughout this time two major themes have arisen: that the collaboration …


Bs News September/October Sep 2020

Bs News September/October

Building Services Engineering

No abstract provided.


Bs News July/August Jul 2020

Bs News July/August

Building Services Engineering

No abstract provided.


Beaver Creek Restorative Design Using Engineering In Nature, Lindsay M. Levatino May 2020

Beaver Creek Restorative Design Using Engineering In Nature, Lindsay M. Levatino

Senior Honors Projects, 2020-current

Stream restoration work can be instrumental for the wellbeing of an ecosystem. Located in the Shenandoah Valley in Virginia is Beaver Creek, a well-known spot for fly-fishing due to its pristine water conditions and open surroundings. In order to maintain these conditions, a 100-foot stretch of Beaver Creek needed to be restored to prevent further erosion, stabilize the banks, and enhance the natural habitats. The project involved excavating a sediment island, filling in an eroded bank, building a cross vane, and adding stakes. Local stakeholders came together to complete this project contributing their expertise, equipment, and time. The construction was …


Promoting The Sustainable Utilization Of Groundwater Resources In Ethiopia Using The Integrated Groundwater Footprint Index, Xinyu Lin May 2020

Promoting The Sustainable Utilization Of Groundwater Resources In Ethiopia Using The Integrated Groundwater Footprint Index, Xinyu Lin

Honors Scholar Theses

The country of Ethiopia is highly vulnerable to human-caused climate change and is already suffering from the effects. The predominately rural population relies heavily on small-scale agriculture, with 78% of households having at least one member engaged in the field, yet staple crops are highly susceptible to droughts and other weather shocks. Total and agricultural GDP growth in the country have been strongly linked to inter-annual rainfall variability, of which Ethiopia has among the highest in sub-Saharan Africa. A decrease in rainfall since the 1970s has been one of the primary causes of low crop yields, and stresses the immediate …