Civil Engineering Commons^™

Moisture Induced Deformations In Glulam Members - Experiments And 3-D Finite Element Model, Henry Meleki Kiwelu

Tanzania Journal of Engineering and Technology (TJET)

Experiments were performed on scaled glue laminated bending specimens to observe time dependent development of deformations during drying and wetting. Measurements determined changes in the average moisture content and external shape and dimensions between when specimens were placed into constant or variable climates. Alterations in the external shape and dimensions reflected changes in the average value and distribution of moisture and mechanosorptive creep in the glulam. The results are being used to develop a sequentially-coupled three-dimensional hygrothermal Finite Element (FE) model for predicting temporally varying internal strains and external deformations of drying or wetting solid wood structural components. The model …

Removal Of Organic Material In Free Water Surface Gravel Bed Filters, Aloyce Mayo

Tanzania Journal of Engineering and Technology (TJET)

The removal of organic material in free surface gravel bed filters was investigated and modelled. Two pilot wetland units of 7.5m x 1.5m x 0.7m were constructed adjacent to the University of Dar es Salaam waste stabilization ponds to receive maximum organic and hydraulic loading rates of less than 185 kg/ha/d and 110 l/m2/d, respectively. These units received wastewater of domestic characteristics from primary stabilization pond. The entire depth of 0.7 m of the wetland units were packed with gravel of size 8 ~ 25 mm and porosity of 35%. Samples were collected from the influent and effluent of wetland …

Prediction Of Average Annual Surface Temperature For Both Flexible And Rigid Pavements, Karthikeyan Loganathan, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

The surface temperature of pavements is a critical attribute during pavement design. Surface temperature must be measured at locations of interest based on time-consuming field tests. The key idea of this study is to develop a temperature profile model to predict the surface temperature of flexible and rigid pavements based on weather parameters. Determination of surface temperature with traditional techniques and sensors are replaced by a newly developed method. The method includes the development of a regression model to predict the average annual surface temperature based on weather parameters such as ambient air temperature, relative humidity, wind speed, and precipitation. …

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

Multi-Hazard Performance Assessment Of High-Rise Buildings, Jad El Khoury Antoun

LSU Master's Theses

In the last few decades, there has been an important increase in building high-rise constructions in many cities around the world. Since they offer several benefits in populous areas in terms of space efficiency, economy and sustainability, tower buildings attracted practitioners and researchers to understand better their exclusive behavior and response to natural hazards (e.g., hurricanes, earthquakes). Because of their flexibility and their commonly limited damping, skyscrapers are more susceptible to wind and earthquake actions than low- and mid-rise buildings. Moreover, many locations are prone to multiple hazards; hence, it is important to understand thoroughly the structural behavior of structures …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …

Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad

Makara Journal of Technology

Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …

Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …

Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid

Makara Journal of Technology

In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.

Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul

Makara Journal of Technology

This paper reports the synthetic, characterization and theoretical evaluation of new class of hybrid Heck-immine system involving mixed moieties of vinylene (C=C) and azomethines (CH=N) which has been successfully integrated into an addition of organic semiconducting materials. The assessment of 4-[(hexyloxyphenyl)methylene]amino)-4’-chloro-stilbene (HEXCS) based on Donor (D)-π-Acceptor (A) was evaluated as active semiconductor material candidates via several spectroscopic and analytical techniques. In turn, the investigation of its potential as dopant system in conductive film was successfully deposited on indium tin oxide (ITO) coated substrate via spin coating method. The relationship between electronic and optical properties, chemical modelling at molecular interactions and …

Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo

Makara Journal of Technology

An audio-magnetotelluric (AMT) survey has been performed at Cepu oil field located in Indonesia. The objective of this research is to detect resistivity structures of this important hydrocarbon rock. This research can be classified as an innovation in application of the AMT method for hydrocarbon exploration. The lack of seismic resolution has been provided by the AMT method, especially in the location of sub-basalt and sub-salt plays. In additional, the cost of AMT survey is quite low compared to seismic. The forward modelling is included in this research to understand the measurement data response from a mathematical model. In the …

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building: Revit Up, Gimelle Jacala, Colin Strong, Jason Wu

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Community Resource Center, Jackie Koyama, Daryll Mendoza, Kourtnie Sicam

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Operation Bim: Robb Garden Building Project, Michael White, Daniel Seif, Suman Bhardwaj

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Dense-Graded Aggregate Base Gradation Influencing Rutting Model Predictions, Issam I. A. Qamhia, Liang Chern Chow, Debakanta Mishra, Erol Tutumluer

Civil Engineering Faculty Publications and Presentations

This paper presents findings from an ongoing research study at the University of Illinois focused on developing and calibrating an improved permanent deformation model for unbound aggregate materials through laboratory testing and characterization. The project scope included testing sixteen aggregate materials, commonly used in the state of North Carolina for pavement base courses, in the laboratory through monotonic and repeated load triaxial testing. This paper primarily focuses on quantifying effects of aggregate gradation on permanent deformation behavior. To accomplish this, four materials were tested at both: (1) “source gradations,” i.e. original gradations from quarry, and (2) an “engineered gradation,” i.e., …

On The Fatigue Of Headed Shear Studs In Steel-Concrete Composite Bridge Girders, Brianna Laurene Ovuoba

Graduate Theses and Dissertations

Shear connectors are commonly used in steel bridges to join the concrete deck and steel superstructure, providing a mechanism for shear transfer across the steel-concrete interface. The most common shear connector is the headed shear stud. In the current AASHTO LRFD Bridge Specifications on composite design, shear stud fatigue often governs over static strength, and a large number of shear connectors often result. This dissertation investigates headed shear stud fatigue capacities and demands, and provides insight into conservancies in existing design specifications through examination of existing high-traffic bridge performance.

To investigate stud capacity, a total of six high-cycle fatigue tests …

Development Of An Internal Camera-Based Volume Determination System For Triaxial Testing, Sean Elliott Salazar

Graduate Theses and Dissertations

Accurate measurement of axial, radial, and volumetric strain parameters are critical to the understanding of phase relationships and the constitutive behavior for saturated and unsaturated soils. The use of photographic monitoring techniques for laboratory-based measurement of these parameters have become common. A novel technique that utilized camera instrumentation located within the triaxial testing cell was developed and validated. By placing the instrumentation inside of the cell, instead of the instrumentation being located outside of the cell, the technique eliminated cumbersome corrections required to account for optical distortions due to 1) the refraction of light at the confining fluid-cell wall-atmosphere interfaces, …

Cost-Savings Of Implementing Site-Specific Ground Motion Response Analysis In Design Of Mississippi Embayment Bridges, Ethan Ryan Benton Baker

Graduate Theses and Dissertations

Deep dynamic site characterization and a site-specific ground motion response analysis (SSGMRA) were conducted for a bridge site in Monette, Arkansas. The SSGMRA indicated the design acceleration response spectrum determined using the American Association of State Highway and Transportation Officials (AASHTO) general seismic procedure could be reduced by 1/3 for the short period range due to attenuation of the short-period ground motions. The steel girder pile-bent bridge, originally designed using the AASHTO general seismic design procedure, was redesigned using the updated seismic demands estimated from SSGMRA. A cost-savings analysis was then conducted to determine the potential savings associated with conducting …

An Evaluation Of Borehole Hydraulic Conductivity Equations And Field Determined Soil Water Characteristic Curves, Johnathan Dale Blanchard

Graduate Theses and Dissertations

The methods utilized to determine the hydraulic conductivity of compacted clay liners (CCLs) are of importance for safe guarding the environment from landfill leachate. Therefore, the methods utilized in the analysis of the Two Stage Borehole (TSB) test, as described in the ASTM D6391-11 (Method A, B, and C) standard, were evaluated. Data from hydraulic conductivity tests, as performed on three test pads, were utilized to review the ASTM D6391-11 equations. Additionally, two test pads were instrumented with volumetric water content and soil water matric potential sensors to facilitate the determination of field-obtained soil water characteristic curves (SWCCs) and hydraulic …

Automated Pin-Dot Marking Effects On A709-Gr50 Steel Plate Fatigue Capacity, Michael Andrew Noernberg

Graduate Theses and Dissertations

During fabrication of multi-piece steel bridge assemblies, markings are often made on the steel surface to identify/track individual pieces or to provide reference for fabrication layout or later erection. Automated marking methods such as computer numerically controlled (CNC) pin-dot marking offer fabrication efficiencies; however, for marked steel sections subjected to frequent or repeated loading (i.e. bridge girders) many code specifications require experimental testing to verify any marking effects on fatigue capacity. In this study, the effects of automated pin-dot markings on the fatigue capacity of A709-Gr50 bridge steel are experimentally investigated from 13 specimens considering 2 marking frequencies (corresponding to …

Evaluation Of Water Resources And Hydraulic Influences In The Restoration Of The Western Part Of The Mesopotamian Marshlands, Ali Kareem Al-Quraishi

Graduate Theses and Dissertations

The purpose of this study is to assess the water resources and water conveyance system of the western part of the Mesopotamian marshes (Al-Hammar marsh) as well as develop a water conveyance system to distribute water throughout the western Al-Hammar marsh. These processes are significant to identify the current restoration problems and help to create restoration strategies for the marsh. Also, proper management strategy to the Al-Hammar marsh is necessary to preserve the marsh ecosystem, irrigate lands, and provide domestic necessities in the villages.

The overall project is divided into three main chapters which address the current ecological and hydrological …

Dem Study Of A Single Stone Column In A Clayey Stratum, Anibal Enrique Santos

Graduate Theses and Dissertations

Aggregate piers are an alternative ground improvement technique used for improving the bearing capacity and reducing the total and differential settlement of foundations supported on compressible soils. The piers are composed of a series of vibrationally compacted aggregate lifts from a desired depth up to the finished foundation level. The shear strength of the coarse-grained material comprising an aggregate pier is defined by its internal friction angle. There are several factors affecting the friction angle of the granular material that include: confining stress, particle shape, relative density and particle distribution (gradation). These factors are not directly considered in the design …

Shear Behavior Of Synthetic Fiber Reinforced Concrete Box Culverts, Mahnaz Mostafazadeh

Civil Engineering Dissertations - Archive

This research pursues a comprehensive experimental study on the shear capacity of zero-slump, dry-cast Synthetic Fiber-Reinforced Concrete (SYN-FRC) with the aim of reducing or even eliminating stirrups in box culverts. Since using stirrups in structures such as box culverts need labor work and cause reinforcement congestion, eliminating or reducing stirrups in design, prevent poor-quality concrete, help better concrete compaction and could save manufacturer time and money over the years. This study first determined the shear capacity of synthetic fiber concrete matrix by varying fiber volume fraction. Then, FEA and full experimental tests have been conducted to evaluate the effect of …

Improvements To The Duplicate Shear Tester, Yazeed Suleiman Jweihan

Civil Engineering Theses - Archive

Rutting in the asphalt concrete layer is a major distress in flexible pavements caused by the permanent shear deformation in asphalt mixes. The shear deformation is induced by heavy truck axis during hot summer days. Rutting affects directly the safety and users comfort. Therefore, developing of an appropriate test device for measuring the fundamental shear properties of asphalt mixes is important in order to improve the rutting resistance of asphalt mixes and pavement performance. The desired device should be simple, inexpensive, and accurate to be able to be incorporated for a quality control or quality assurance process, as well as …

Evaluation Of Plant Root On The Performance Of Evapotranspiration (Et) Cover System, Md Jobair Bin Alam

Civil Engineering Dissertations - Archive

The performance of an evapotranspiration (ET) cover for a landfill exceeds that of a conventional landfill final cover. Its low percolation and high evapotranspiration rely on the properties of unsaturated soils, the energy demands of plants, and the atmosphere. Plant roots pull water out of the cover soil and release it into the environment, thus managing water in a much more natural way than the conventional cover, where water is controlled by creating a physical barrier. Therefore, plant roots are a significant component in the optimization of ET cover performance. In recent years, a great deal of effort has been …