Civil Engineering Commons^™

A Chemical Study Of Archaeometallurgical Ceramics From Southwestern Tanzania, Edwinus Lyaya

Tanzania Journal of Engineering and Technology (TJET)

Archaeometallurgical ceramics, including furnaces, tuyères, and potteries, were required for successful pre-industrial iron smelting and refining. However, there are limited chemical studies on archaeometallurgical ceramics in Tanzania. This paper examined the nature of clay source in terms of refractoriness, determined whether there were multiple clay sources, and verified the refractoriness of the archaeometallurgical ceramics. An x-ray fluorescence (XRF) analytical technique and experimental re-firing of the archaeometallurgical ceramics were employed. The chemical data clustered in the mullite region on the Al2O3-SiO2-FeO ternary system indicate that iron smelters and refiners chose refractory clay sources for making archaeometallurgical ceramics. Small range and standard …

Development Of An Operational Satellite-Based Flood Monitoring Model For Tanzania, Andrew Kimati

Tanzania Journal of Engineering and Technology (TJET)

Timely information during water related disasters is of utmost importance for flood preparedness and risk reduction. However, the conventional ground-based photographic monitoring of flooded areas is an expensive and time-consuming exercise. Satellite remote sensing is a quick and affordable approach that can be used for concurrent floods detection at different scales. This is important as it facilitates timely information for emergency response to disaster management departments, even in scarcely instrumented catchments. This study presents a novel approach for flood tracking using satellite image remote sensing science to map flood affected areas immediately after occurrence of rainfall events. An open-source water …

Concrete Technology In A Rapidly Growing Urban Environment – The Case Of Dar Es Salaam City, John K. Makunza Jkm

Tanzania Journal of Engineering and Technology (TJET)

Concrete is a building material that is used in great quantities second only to our use of water. The ingredient materials of concrete include cement, fine and coarse aggregates plus a reasonable amount of water, and sometimes additives. The construction of various structures like, residential buildings, commercial buildings, hospitals, schools, bridges, etc., needs good quality concrete. Good modern technologies are needed by the construction industry in order to effectively construct buildings which are durable. A study has been done with the main objective of assessing the concrete technologies existing in rapid growing cities in Sub-Sahara Africa like Dar es Salaam, …

Assessing Morphological Changes Of The Msimbazi River Using Satellite Images, Fides J. Izdori

Tanzania Journal of Engineering and Technology (TJET)

This study assessed historical morphology changes of the Msimbazi River in Dar es Salaam City, Tanzania, following heavy rainfall events using historical Google earth images. The erosion and sedimentation processes that cause morphological changes of a river are also associated with flooding within the river catchments. In this study, the bank-line movement, erosion and sedimentation areas and changes in river section width were analyzed under three-time periods: 2005- 2012, 2012- 2018, and 2018- 2020. Data shows that, the timing for floods coincides with the historical records for heavy rains. It was found that, area in the upper reaches of the …

Characteristics Of Extreme Precipitation And Their Effect On Bean Yield In Rwanda, Paul Ts Limbu Sr

Tanzania Journal of Engineering and Technology (TJET)

This study examines the characteristics of extreme precipitation and its effect on bean yield in Rwanda from 1981 to 2017. Over the study area, two rainy seasons, March to May (MAM) and September to December (SOND), account for approximately 80% of total rainfall. The spatial distribution of rainfall over Rwanda revealed that the first three EOF modes of MAM rainfall vary by 72.72 percent over the study period, while the first three EOF modes of SOND rainfall vary by 57.48 percent. The spatial analysis of extreme precipitation reveals that during wet years, the majority of the country's western regions receive …

Analysis Of Ore Hand-Crushed Size Distribution For Grinding Process In The Artisanal And Small-Scale Gold Mines Production: A Case Study Of Nholi Mine, Bahi District, Malugu Tembo

Tanzania Journal of Engineering and Technology (TJET)

(ASGM) employed numbers of people compared to large-scale mines. The ASGM has been played a crucial role in poverty alleviation and rural development, particularly in developing countries. The mined ore is crushed and ground for beneficiation of gold. The grinding process involved the size reduction of blasted materials to acquire minerals of interest. This paper presents the size distribution of hand-crushed for blasted materials using sieve analysis and digital image processing. The sieve test results for hand-crushed blasted material of three muck-piles were ranged between 17 mm and 36 mm that is equivalent to 20% and 80% passings respectively, with …

Deployment Of Inductive Loop Vehicle Traffic Counters Along Trunk Roads In Tanzania, Daudi Simbeye

Tanzania Journal of Engineering and Technology (TJET)

As Tanzania's population grows, there is a greater demand for efficient, effective, and strong road design, as well as a smooth transportation system with a balanced traffic management network architecture. To plan for maintenance and expansion of such a vast network, a credible data inventory and network condition must be established. The deployment of vehicle inductor loop counters along Tanzanian trunk roads is presented in this paper. At test sites, inductor loop sensors and control cards were used to capture vehicle traffic data, which was then wirelessly sent using GSM technology for vehicle classification verification and storage for future road …

Energy Assessment Of E-Motorcycles As A Clean Transport Mode For Passenger Mobility: A Case Of Ilala District, Dar Es Salaam, John Shirima

Tanzania Journal of Engineering and Technology (TJET)

Electric motorcycles or e-motorcycles is a clean mode of road transport that present a prominent solution toward decarbonizing cities. Despite of e-motorcycles being cleaner than gasoline ones, at the moment, there is missing information whether it is feasible to replace gasoline motorcycles with e-motorcycles used for business transport purposes. This paper, therefore, presents the results comparing energy usage when using e-motorcycles and when using the gasoline motorcycles. The energy demand for driving passengers using an e-motorcycle in the precarious routes originated from Gongo la Mboto bus stop to Segerea bus stop, Buguruni Malapa, Gerezani bus stop, Kivukoni bus stop, and …

Assessing The Influence Of Overweight Axles On Rutting Lives In Flexible Pavements Using Parametric Survival Analysis, Ali Hatoum, Jamal Khatib, Firas Barraj, Adel Elkordi

BAU Journal - Science and Technology

The existence of rutting or permanent deformation on flexible pavement layers has always been a concern that negatively affects the performance of roads by reducing the lifespan of pavement structure and by posing a safety risk for vehicles over the road. Traffic overloading is one of the primary factors that accelerates the deterioration of flexible pavement. This study aims to determine the time to failure of the flexible pavement structures associated with rutting, to indicate the most significant factors affecting rutting, and to assess the influence of overweight axles on pavement rutting life using parametric survival analysis. The data used …

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Fire-Resistance Testing Procedures For Construction Elements—A Review, Shashikant Chaturvedi, Ajitanshu Vedrtnam, Maged A. Youssef, Martin T. Palou, Gonzalo Barluenga, Kishor Kalauni

Civil and Environmental Engineering Publications

Fire accidents are a significant risk to human life and civil infrastructure. As a countermeasure, the regulatory bodies of different countries have established standards for evaluating the performance of construction elements during fire exposure. ISO 834 is the globally accepted fire-resistance testing standard. Other standards include ASTM E119, BS 476, IS 3809, JIS A 1304, AS 1503, EN 1363, and GB/T 9978, which are utilized by the US, Britain, India, Japan, Australia, Europe, and China, respectively. This article presents a summary and comparison of the fire-resistance testing standards. In reality, standard tests for isolated structural members may not efficiently portray …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

A Framework For Multi-Dimensional Assessment Of The Impacts Of Overweight Vehicle Operations And A Corridor-Level Case Study, Maria Alicia Chung Li

Lyles School of Civil Engineering Graduate Student Reports

Ground freight transportation is essential for the economy of any region. The efficient movement of goods from one location to another connects businesses with suppliers and customers, that enhances commerce and ultimately boosts the economy. The high volume of freight that has been transported on the nation’s highway network has allowed the trucking industry to provide enormous socio-economic benefits. Unfortunately, these benefits come with some costs associated with the operation of overweight (OW) trucks, such as accelerated deterioration of highway pavement and bridge assets, and passenger and freight traffic safety degradation. Thus, to manage safety risk, traffic mobility, and infrastructure …

Exploring The Use Of Piox System For Treatment Of Endocrine Disrupting Compounds, Alexander Pearson

Civil Engineering Theses

In this thesis, the Photon Initiated Oxidation (PIOx) system was investigated for its possible use in the treatment of Endocrine Disrupting Compounds (EDCs). It was theorized that the unique design of the system, namely the multiple wavelengths of UV light and the micronfoam would improve removal rates of the test contaminant when compared to other systems. 17β-estradiol was chosen as the test contaminant due to the compounds known sensitivity to ozone exposure. Two methods of testing were used, the first to test an idealized homogenous concentration (method one) and the second to mimic the sudden influx of contaminant that would …

Evaluation For Using Expended Bioelectrochemical Systems As Soil Amendments For Improved Corn Plant Growth And A Drought Resistant Soil., Jackson Lee Sauers

Theses and Dissertations

A long-held practice is to mix agricultural soil with a soil amendment to improve growing conditions in crops. A common soil amendment is biosolids produced from both municipal and dairy wastewater due to the macro- and micronutrients within it. Both the agricultural and wastewater industries are participating in the Circular Economy concept (CEC). Two experiments explored using expended bioelectrochemical systems (BES) that treated either synthetic dairy wastewater (DWW) or synthetic municipal wastewater (SWW) as soil amendments to improve corn plant growth when treated with three different nutrient treatments: 100%- 50%- and 0% Hoagland Nutrient Solutions. Biochar and used terracotta clay …

Behavior Of Completely Automated Evapotranspiration Estimation (Eemetric), Atiqullah Atif

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Evapotranspiration (ET) is the second-largest component in the water balance equation, globally consuming 70% of the earth’s annual precipitation. Accurate and consistent estimation of ET is essential for ensuring water resources sustainability, proper management, planning, and regulations of water resources. Though a 100% accurate estimation of ET may not be feasible with the current technology, there are proven techniques that give us estimates of ET we can heavily rely on. Mapping Evapotranspiration at High Resolution with Internalized Calibration (METRIC) is a widely used surface energy balance model that produces relatively accurate ET maps utilizing remote sensing data and requires skilled …

Experimental And Numerical Study: Sheet Pile Abutment Systems For Water-Crossing Bridges, Hung Phi Van

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Sheet piles are geotechnical-structural elements with interlocking edges together that are driven into the ground to deliver soil retention and excavation support. Steel sheet pile walls are widely used for retaining walls, riverbank protection, seawalls, cofferdams, etc. In Nebraska, sheet pile walls prevent scouring and protect backfill for bridge abutment systems. While sheet piling is not designed and applied to resist vertical load, several recent studies attempted to investigate whether sheet piles could be employed for axial load bearing. Many projects from Europe and some in the U.S. have utilized the axial load-bearing capacity of sheet piles in bridge abutment …

Stochastic Approach To Hydrological Dam Safety In The Framework Of The New Dam Safety Standards In Spain, Iván Gabriel-Martin, Francisco J. Caballero, Álvaro Sordo-Ward, Luis Garrote

Protections Conference

The approval of the Technical Safety Standards for dams and reservoirs in Spain in 2021 increased the hydrological safety requirements, being necessary to check if measures have to be implemented in dams designed according to the prior standards. Some of these dams have scarce instrumentation and lack of hydrometeorological data. This work proposes a simple but sounded fully-stochastic methodology for assessing the hydrological safety of dams within this situation, potentially applicable outside academia. The methodology has been applied to a case study based on a real dam, and compared the results obtained to those of the standard deterministic procedure. We …

Wirewall A Follow Up: Labratory And Field Measurements Of Wave Overtopping, Tim Pullen, Jenny Brown, Margaret Yelland, Robin Pascal, Richard Pinnell, Chris Cardwell, David Jones

Protections Conference

At the Protections 2018 conference, the WireWall wave overtopping research project was introduced. WireWall uses recent advances in high frequency capacitance wire technology that can measure overtopping data. Wave overtopping has now been measured in the laboratory and in the field using the WireWall system. Here we provide an update on the validation of the system in flume tests and results from the first field measurement campaign.

Before deployment in the field, an extensive set of tests were carried out in one of the 2D wave flumes at HR Wallingford. These tests simulated known wave conditions from a buoy near …

Methodology For Calculating The Response Of Porous Media For Evaluating Grass Response To Overtopping Loads, Myron Von Damme, Dennis Den Ouden-Van Der Horst

Protections Conference

Grass covers offer a level of erosion protection against hydrodynamic loads induced by overtopping waves. The development of an accurate failure criterion for grass covers has been hampered by the lack of understanding of how grass fails. Methods have been developed to predict the hydrodynamic loads that act on the levee surface and consequently are transmitted to the porous grass cover and subsoil. However, it is unknown how these hydrodynamic surface loads on the soil are distributed amongst the pore water pressures and effective stresses, thereby offering a significant challenge for engineers to simulate the transmission of stresses into the …

Hydraulic Computations For Stepped Concrete Overlays Of Embankment Dams, Tony L. Wahl, Sherry L. Hunt, Kem C. Kadavy, Henry T. Falvey

Protections Conference

One method for rehabilitating and modernizing embankment dams is the addition of a concrete overlay that protects the embankment and allows floods to pass safely over the dam. Roller compacted concrete is commonly used, which makes it practical to use a stepped construction that also enhances energy dissipation. Analysis of flow conditions over such structures requires computation of aerated flow and its effects on flow depth, training wall design, and energy dissipation. This paper describes Spillway Pro, an energy-based water surface profile calculation tool for smooth spillway chutes (Wahl et al. 2019), recently improved to also analyze stepped chutes. The …

Field Testing Of The Overflow Erosion Of Rhone River Levees, Christophe Picault, Fabrice Campette, Stéphane Bonelli, Sylvie Nicaise, Naim Chaouch, Faustine Byron, Yves Gremeaux, Alexis Doghmane, Mathys Garoui, Jordan Herbeck, Frédéric Golay

Protections Conference

It is important to quantify the soil resistance against erosion caused by the overflow of dikes and levees. Small-scale tests are not recommended, as they do not provide a correct representation of the actual soil in place and do not take into account the geometry of the structure. For this reason, the National Research Institute for Agriculture, Food and Environment (INRAE) developed an on-site overflow device in 2015. The procedure followed is based on ASTM-D6460 standard. Two tests were performed in May 2022 on a Compagnie Nationale du Rhône (CNR) dike near Avignon (France). The dike is 6.2 m high; …

Recent Case Histories Of Cascade Failures And Overflowing Events Of Embankment Dams, Alexius Vogel, Jean-Robert Courivaud, Katarzyna Jarecka

Protections Conference

Excessive rainfall and extensive flooding within the context of a changing environment show the fact that resistance to overflowing erosion of embankment dams needs to be better assessed because of the increasing number of dam failures caused by overflowing, implying the necessity of a reaction to this kind of challenges. Better understandings of the embankment failure processes and the dominant parameters affecting these kinds of failures are necessary for predicting and modeling the breach processes. Acquiring this better understanding of the physical processes and a numerical prediction capability requires progressing in parallel in laboratory and field test investigations of embankment …

Evaluating Arkansas Weathering Steel Bridge Performance, Yessenia Gonzalez

Graduate Theses and Dissertations

Weathering steel enhances corrosion-resistant steel features over conventional steel when a patina properly forms on the weathering steel surface. Weathering steel is a low carbon steel of less than 0.3% carbon by weight and has a chemical composition including other alloying elements such as nickel, copper, and chromium that develops a patina. The patina is a dense protective oxide film layer that develops on the steel member surface. The patina defends the steel from corrosion by preventing moisture, oxygen, and contaminant penetration. However, long periods of moisture and deicing chemicals applied during wet wintry conditions hinder proper patina formation. Without …

Improving Building Cfd Peak Pressure Computation Using Les With A Focus On Inflow Turbulence Methods And Grid Spacing Size., Zahra Mansouri

Graduate Theses and Dissertations

Structural failures by extreme winds often leads to economic losses and even deaths. Proper design of buildings requires accurate estimation of wind loads to prevent structural damage. Using routine guidelines generally leads to the underestimation of buildings’ peak pressures, in which most failures occur. To estimate wind loads more accurately three different methods (i.e., field measurement, wind tunnel (WT), and computational fluid dynamics (CFD)) are in use. A well-validated CFD provides more flow field details at lower costs compared to field measurements and WT. As strong winds are extremely turbulent, the effects of turbulence in wind should be incorporated into …

Performance Evaluation Of The Modified Moisture Barrier In Stabilizing Shallow Slope Failures, Muhasina Manjur Dola

Civil Engineering Dissertations - Archive

Each year significant number of highway slope failures are reported in the United States, especially in states like Texas where expansive clayey soil is prevalent. Slopes constructed over expansive clay often experience recurring shallow failures following their construction which poses maintenance problems to the Texas Department of Transportation (TxDOT). These shallow slope failures can be primarily attributed to the considerable volume change that expansive clay soil undergoes from seasonal climatic variation. Furthermore, under unsaturated conditions during dry periods, high matric suction (i.e., negative porewater pressure) exists in soil slopes. The existence of matric suction contributes to the shear strength of …

Development Of A Decesion Tree To Rehabilitate Or Replace The St. Francis Bridge Over Ih-30, Md Farhan Abir

Civil Engineering Theses - Archive

ABSTRACT: The ASCE infrastructure report card indicated that about 42% of the nation’s bridges are over 50 years old, and 7.5% of the bridges are structurally deficient. The 61-year-old St. Francis bridge over IH-30 is one of the Texas Department of Transportation (TxDOT) bridges that exhibit significant deterioration in the superstructure, including potholes and delamination in the deck. The bridge was load posted to 28,000 lb. limit and has substandard vertical and horizontal clearances to the bottom chord of the beams and supporting piers, respectively, which creates a high risk for vehicle impact. In 2017, an over-height truck struck the …

Study Of The Impact Of Atmospheric Variability On Subsurface Methane Emissions: Application To Leak Detection And Quantification For Underground Natural Gas Pipeline Leaks, Shanru Tian

Civil Engineering Dissertations - Archive

Natural gas (NG), taken as a bridging fuel for achieving a low-carbon future, has rapidly grown to be a significant component of the global energy system and requires extensive pipeline infrastructures, most of them buried underground. Fugitive methane (CH4) emissions from NG pipeline leaks pose environmental, safety, and economic threats to the public. An effective leak detection and quantification (LDAQ) survey method is critical to identifying a leak and assessing the size when it has occurred, thus initiating appropriate response actions to repair it and accounting for the environmental risks accurately. However, gaps exist between LDAQ survey methods, and the …

Investigation Of Models To Predict The Remaining Useful Life Of Prestressed Concrete Cylinder Pipe, Ahmad Mahmoud Jibreen

Civil Engineering Dissertations - Archive

The water distribution system in the United States consists of 2.2 million miles of pipelines with water main breaks that the American Society of Civil Engineers (ASCE) 2021 Report Card estimated results in six billion gallons of drinking water lost daily. Detecting the state of pipeline deterioration should always be a top priority in the water pipeline industry This dissertation statistically evaluates data from more than 70,000 electromagnetic inspections that have been performed since the installation of these pipes in 1971. The scope of this dissertation is related to performance and degradation of prestressed concrete cylinder pipe (PCCP) which is …

Investigation Of Geopolymer Based Soil Stabilization Methods For Expedient Airfield Pavement Surfaces, Brett Albertson

All Theses

The United States Air Force (USAF) has the unique capability of being able to interdict superior airpower anywhere, at any time. However, superior airpower is only as effective as the amount of time an aircraft can spend in a particular area. The closer an aircraft can get to the mission need, the more time that can be spent in the air, or the less time that must be spent moving in and out of the operational area. Through the use of skilled and experienced men and women, the USAF is able to apply expedient and unsurfaced airfield paving techniques that …