Open Access. Powered by Scholars. Published by Universities.®

Civil Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2002

Discipline
Institution
Keyword
Publication
Publication Type

Articles 1 - 30 of 98

Full-Text Articles in Civil Engineering

Potential For Use Of Sand In Road Construction In Dar Es Salaam And Coast Regions, Mfinanga A Dec 2002

Potential For Use Of Sand In Road Construction In Dar Es Salaam And Coast Regions, Mfinanga A

Tanzania Journal of Engineering and Technology (TJET)

Coarse aggregates for use in road construction in Dar es Salaam and Coast regions are becoming increasingly scarce and expensive while sand, which is cheaper, is readily available in the two regions. This research aimed at evaluating the possibility of using quarry sands in the two regions as a major constituent material in bituminous road pavement layers. First, the use of sand in sand-bitumen bases for low and medium trafficked roads was studied. The study then continued with the preliminary evaluation of the possible use of the sands in hot rolled asphalt mixes. Results show that Mbagala sand can be …


Sustainable Data Acquisition Methods For Road Maintenance Management In Developing Countries, N. K.M. Mushule Dec 2002

Sustainable Data Acquisition Methods For Road Maintenance Management In Developing Countries, N. K.M. Mushule

Tanzania Journal of Engineering and Technology (TJET)

Whilst it may be argued that manual methods of pavement data collection are subjective, unsafe, involve high personnel costs and have low repeatability, the initial costs of acquiring automated systems coupled with the technology required to operate and maintain them can be prohibitive for most developing countries. Moreover, automatic measurement of surface distress has proved to be a difficult challenge to instrument designers. In many cases, manual methods are the only ones that can be employed. A research project was carried out to design a sustainable data collection scheme for network level management system for developing countries. A simple procedure …


Iodat Analysis Content In Cooking Ingredients Using Iodometry And X-Ray Fluorescence Methods., Nelson Saksono Dec 2002

Iodat Analysis Content In Cooking Ingredients Using Iodometry And X-Ray Fluorescence Methods., Nelson Saksono

Makara Journal of Technology

Iodat Analysis Content in Cooking Ingredients Using Iodometry and X-ray Fluorescence Methods. Salt iodization program using iodine fortification into salt method is the best method that is effective and economical to overcome the problems caused by iodine deficiency. However in, its development there are some issues clamed that the use of iodized salt is ineffective since iodine content reduces, even disappear when the salt mix with other cooking ingredients. In order to investigated the existence of iodine in cooking ingredients, a research applying iodometry and X-ray fluorescence methods was carry out. The result obtained by iodometry method showed decreases in …


Emission Gas Reducer On Motor Vehicle, Automobile, Light Engine Of Boat And Stationary Combustion Engine., I Gusti Bagus Wijaya Kusuma Dec 2002

Emission Gas Reducer On Motor Vehicle, Automobile, Light Engine Of Boat And Stationary Combustion Engine., I Gusti Bagus Wijaya Kusuma

Makara Journal of Technology

Emission gas reducer on motor vehicle, automobile, light engine of boat and stationary combustion engine. The use of motor vehicle should be followed by protection against damages on the environment, since the exhaust gas from combustion engine has significantly affect on air and environmental pollution. One method to solve the problems in air pollution has been done by using a re-heater designed in Mechanical Engineering Department, University of Udayana. In accordance to the test on the re-heater, it can be seen very clear that the re-heater has significantly reduce the CO emission of about 54%. It also reduces the CO2 …


Application Of Remote Sensing For Mapping Soil Organic Matter Content, Bangun Muljo Sukojo, Wahono Wahono Dec 2002

Application Of Remote Sensing For Mapping Soil Organic Matter Content, Bangun Muljo Sukojo, Wahono Wahono

Makara Journal of Technology

Application of Remote Sensing for Mapping Soil Organic Matter Content. Information organic content is important in monitoring and managing the environment as well as doing agricultural production activities. This research tried to map soil organic content in Malang using remote sensing technology. The research uses 6 bands of data captured by Landsat TM (Thematic Mapper) satellite (band 1, 2, 3, 4, 5, 7). The research focuses on pixels having Normalized Difference Soil Index (NDSI) more than 0.3. Ground-truth data were collected by analysing organic content of soil samples using Black-Walkey method. The result of analysis shows that digital number of …


Optimation Model Of Planning Investment Dockyard With Approach Multi Objective Goal Programming, Ali Azhar Dec 2002

Optimation Model Of Planning Investment Dockyard With Approach Multi Objective Goal Programming, Ali Azhar

Makara Journal of Technology

Optimation model of planning investment dockyard with approach multi objective goal programming. The purpose of this research is to determine decision variable, goal function, alternative priority and achievement function in investment planning. From this optimation component, the model of ship yard investment planning could be achieved. The model of developed model in this research was the optimation of ship yard investment planning using multi objective goal programming approach. The model consist of 5 decision variable, 11 goal function, 2 alternative priority and 11 achievement functions. The model implementation was done toward PT ASSI investment planning. The calculation using from Quantitative …


Self-Ignition Properties Of Peat, Palm Shell Fibre And Woods, Yulianto Sulistyo Nugroho Dec 2002

Self-Ignition Properties Of Peat, Palm Shell Fibre And Woods, Yulianto Sulistyo Nugroho

Makara Journal of Technology

Self-ignition properties of peat, palm shell fibre and woods. Forest fire is one of the greatest environmental problems faced by Indonesia. Forest fires have destroyed million hectares of forest and land which cause economic loss, social problems including smoke related diseases and environmental disaster with long time consequences. The exothermic reactions of forest fuels that lead to fire can be initiated by a piloted flame and low-temperature oxidation mechanism. This paper presents the results of low temperature oxidation studies using forests fuel samples i.e. palm shell fibre, peat, woods and low-rank coal. The measured values of the critical oven temperatures …


The Use Of 2d Plastic Grating For Surface Profile And Dimension Manufacture Product Measurements By Using Ndt Moiré Technique, Retno Wigajatri P., Dini Andiani Dec 2002

The Use Of 2d Plastic Grating For Surface Profile And Dimension Manufacture Product Measurements By Using Ndt Moiré Technique, Retno Wigajatri P., Dini Andiani

Makara Journal of Technology

The Use of 2D Plastic Grating for Surface Profile and Dimension Manufacture Product Measurements by Using NDT Moiré Technique. Research of measuring the shape and dimension of object using the moiré technique have been done. Measurement have been made by observing the moiré space as a result of interaction between grating and its shadow casted on the object’s surface caused by the projector lamp with CCD camera. The acquired data was further processed by way of off-line. By successive phase shifts that is π/2, π dan 3π/2 towards the table tennis ball at the distance of 48 cm from the …


Bs News Dec 2002

Bs News

Building Services Engineering

No abstract provided.


Using The Ltpp Database In A Pavement Design Course, Norbert J. Delatte Oct 2002

Using The Ltpp Database In A Pavement Design Course, Norbert J. Delatte

Civil and Environmental Engineering Faculty Publications

The Strategic Highway Research Program Long Term Pavement Performance (LTPP) database provides considerable information about a large number of pavement test sections. The information may be easily accessed using DataPave 2.0 software, available free from the Federal Highway Administration. This software provides information on approximately 3,000 sections, with several modules for data analysis and extraction. This paper describes the integration of LTPP DataPave 2.0 software into a pavement design course. The database was used at several points throughout the course, including lessons on traffic characterization, materials, reliability, performance, and design. Twelve Texas pavement case studies were used. Each student was …


Bs News Oct 2002

Bs News

Building Services Engineering

No abstract provided.


Moisture Migration In Concrete Slabs During Drying, Niall Holmes, Roger West Sep 2002

Moisture Migration In Concrete Slabs During Drying, Niall Holmes, Roger West

Conference papers

This paper presents the profiles of relative humidity (RH) readings taken at various depths in concrete slabs during a time period of over 230 days using probes attached to a humidity-reading device. It also examines the effect ambient conditions have on the drying process. For the experimental work, two sets of slabs were tested, one in a controlled environment with an elevated temperature and the other in a laboratory at room temperatures. It was found, not surprisingly that the slabs in the controlled room appeared to dry out at a much faster rate than those held at room temperature. However, …


An Evaluation Of Facility Maintenance And Repair Strategies Of Select Companies, Christopher L. Sharp Sep 2002

An Evaluation Of Facility Maintenance And Repair Strategies Of Select Companies, Christopher L. Sharp

Theses and Dissertations

Although initial construction costs are high, the cost of operation and maintenance over a facilities life-cycle is significantly higher. A common challenge for facility maintenance professionals is balancing the cost of facility Maintenance and Repair (M&R) with the benefits derived from those facilities. This thesis documents how a selection of companies implemented that balance by determining their facilities requirements based on their chosen facility condition level and how they then allocated funds. The research effort consisted of interviews with facility maintenance professionals at each company selected. The data was then used to perform a multiple case study analysis and comparison …


Bs News Sep 2002

Bs News

Building Services Engineering

No abstract provided.


Probability Of A Hazardous Material Truck Accident In New Jersey, Mahesh Damodaran Aug 2002

Probability Of A Hazardous Material Truck Accident In New Jersey, Mahesh Damodaran

Theses

Accident prediction modeling is a powerful tool for determining the frequency of accidents under certain circumstances. Nationwide, direct damages from highway hazardous material spills for the year 2000 were tallied at over $31billion. This thesis determines the probability of an accident involving hazardous materials on the roads of New Jersey. The methodology is based on a British predictive equation used by their Highways Agency to determine the probability of a hazardous spill over a section of a roadway. The parameters used by the British's Highways Agency, which is obtained from their accident data, were modified to reflect conditions that best …


The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono Aug 2002

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono

Makara Journal of Technology

Most of infrastructures using steel concrete to reinforce the strength of concrete. Steel concrete is so vulnerable to chemical compounds that can cause corrosion. It can happen due to the presence of chemical compounds in acid environment in low pH level. These chemical compounds are SO4 2-, Cl-, NO3 -. There are many swamp area in Indonesia. The acid contents and the concentration of ion sulphate, chlorides, and nitrate are higher in the swamp water than in the ground water .The objective of this research was to find out the influence of corrosive chemicals in the swamp water to the …


The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani Aug 2002

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani

Makara Journal of Technology

A polluted environment will influence the building age. The objective of this research was to find out the influence of corrosive chemicals within the sludge swamp area with the corrosion rate of steel concrete. Corrosion in steel concrete usually occur in acid area which contain of SO4 2-, Cl- and NO3 -. The research treatment used by emerging ST 37 and ST 60 within 60 days in ‘polluted’ sludge swamp area. Three variation of ‘polluted’ swamp sludge were made by increasing the concentration a corrosive unsure up to 1X, 5X and 10X. The corrosion rate measured by using an Immersion …


The Effect Of Ca Content On Cao-Zeolite On Nitrogen Adsorption Capacity, Mohammad Nasikin, Tania Surya Utami, Agustina Tp Siahaan Aug 2002

The Effect Of Ca Content On Cao-Zeolite On Nitrogen Adsorption Capacity, Mohammad Nasikin, Tania Surya Utami, Agustina Tp Siahaan

Makara Journal of Technology

In industry, Ca zeolite is used as nitrogen selective adsorbent with the use of PSA (Pressure Swing Adsorption)/VSA (Vacuum Swing Adsorption) methods. Natural zeolite modified to be Cao-zeolite by ion exchange process using Ca(OH)2. Adsorption test was done on CaO-zeolite with different Ca concentration to understand how it’s adsorption phenomena on oxygen and nitrogen. Adsorption test has been done for CaO-zeolite with Ca concentration = 0,682%, 0,849% and 1,244% to oxygen and nitrogen with equal concentration seperately. Pressure variation has being done three times (5 minutes long each time) adsorption time to analyze the connection between adsorption time and how …


Cetane Number Booster Additive For Diesel Fuel Synthesized From Coconut Oil, Mohammad Nasikin, Rita Arbianti, Abdul Azis Aug 2002

Cetane Number Booster Additive For Diesel Fuel Synthesized From Coconut Oil, Mohammad Nasikin, Rita Arbianti, Abdul Azis

Makara Journal of Technology

To reduce NOx, SOx, HC, and particulates that produce because of using diesel fuel, can be done by increasing cetane number. One of methods is adding an additive to diesel fuel. 2-Ethyl Hexyl Nitrate (2-EHN) is a commercial additive that an organic nitrate. Making an additive in this research is used palm oil by nitration reaction that used HNO3 and H2SO4. Result of this reaction is methyl ester nitrate that has a structure looks like 2-EHN. IR spectra from research show that methyl ester nitrate is indicated by spectrum NO2 at 1635 cm-1. This result show that methyl ester nitrate …


Analogy Method Development For Cost Estimation Of Software Design, Riyanarto Sarno, Joko Lianto Buliali, Siti Maimunah Aug 2002

Analogy Method Development For Cost Estimation Of Software Design, Riyanarto Sarno, Joko Lianto Buliali, Siti Maimunah

Makara Journal of Technology

The important aspect of planning and managing software development project is to estimate the cost of a project. There are several methods for estimating the cost of a software development project, and the Analogy method is a method which gives relatively better estimates. This paper shows that the modified Analogy method selects a closer project reference, estimates more accurate project effort and cost. This study enhances the cost estimate technique by including valid and complete cost parameters, therefore the estimate of a project cost is better than the result of the standard Analogy method.


The Role Of Si3n4 Amorphous Phase In Nc-Tin/A-Si3n4 Nanocomposites In Increases The Hardness And Thermal Stability, Keba Moto Aug 2002

The Role Of Si3n4 Amorphous Phase In Nc-Tin/A-Si3n4 Nanocomposites In Increases The Hardness And Thermal Stability, Keba Moto

Makara Journal of Technology

The role of Si3N4 amorphous phase in nc-TiN/a-Si3N4 nanocomposites will be shown and compared with polycrystalline ZrN/Ni which has no such amorphous phase (non-composites). The presence of amorphous phase Si3N4 increases the hardness of film as well as the toughness of the bulk nanocomposites under indentation load. It has been observed that nc-TiN/a-Si3N4 nanocomposites films has higher thermal stability than ZrN/Ni polycrystalline films.


Biodiesel's Characteristics Preparation From Palm Oil, Tilani Hamid. S, Rachman Yusuf Aug 2002

Biodiesel's Characteristics Preparation From Palm Oil, Tilani Hamid. S, Rachman Yusuf

Makara Journal of Technology

Biodiesel’s characteristics preparation from palm oil. Using vegetable oils directly as an alternative diesel fuel has presented engine problems. The problems have been attributed to high viscosity of vegetable oil that causes the poor atomization of fuel in the injector system and pruduces uncomplete combustion. Therefore, it is necessary to convert the vegetable oil into ester (metil ester) by tranesterification process to decrease its viscosity. In this research has made biodiesel by reaction of palm oil and methanol using lye (NaOH) as catalyst with operation conditions: constant temperature at 60 oC in atmosferic pressure, palm oil : methanol volume ratio …


Development Of Hardness Measurement Procedure For Nanocomposite Nc-Tin/A-Si3n4, Keba Moto Aug 2002

Development Of Hardness Measurement Procedure For Nanocomposite Nc-Tin/A-Si3n4, Keba Moto

Makara Journal of Technology

Hardness of nc-TiN/a-Si3N4 nanocomposites which was determined by using two methods of measurements i. e. depth sensing method and remaining plastic indentation area that were magnified by using SEM (Scanning Electron Microscope) lie in the good agreement. The hardness value is not influenced by the biaxial and residual compressive stress. The measurement of the biaxial stress on the substrate shows a very small value of biaxial stress as well as the constant hardness and crystallite size against annealing temperature. Therefore, the reported hardness value here is the intrinsic value that depend on its microstructure properties.


Forensics And Case Studies In Civil Engineering Education: State Of The Art, Norbert J. Delatte, Kevin L. Rens Aug 2002

Forensics And Case Studies In Civil Engineering Education: State Of The Art, Norbert J. Delatte, Kevin L. Rens

Civil and Environmental Engineering Faculty Publications

This paper reviews the state of the art in the use of forensic engineering and failure case studies in civil engineering education. The study of engineering failures can offer students valuable insights into associated technical, ethical, and professional issues. Lessons learned from failures have substantially affected civil engineering practice. For the student, study of these cases can help place design and analysis procedures into historical context and reinforce the necessity of lifelong learning. Three approaches for bringing forensics and failure case studies into the civil engineering curriculum are discussed in this paper. These are stand-alone forensic engineering or failure case …


Bs News Aug 2002

Bs News

Building Services Engineering

No abstract provided.


Evaluation Of Water Levevaluation Of Water Levels In Relation To The Design Of Coastal Structures In Tanzaniaels In Relation To The Design Of Coastal Structures In Tanzania, Alfonse Dubi Jun 2002

Evaluation Of Water Levevaluation Of Water Levels In Relation To The Design Of Coastal Structures In Tanzaniaels In Relation To The Design Of Coastal Structures In Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Water levels on the coastline of Tanzania vary under the influence of meteorological conditions (winds and barometric pressure) and the East African Coastal Current, whose strength varies with the monsoon winds. Available tidal information is not enough to warrant statistical analysis for evaluating extreme water levels. The highest mean water springs occur at Bagamoyo and Pangani (3.93 m) and the lowest are found at Lindi (2.96 m). The highest astronomical tide is 3.7 m for Dar es Salaam and 4.6 m for Zanzibar, both of which occur during March/April and November. Measured highest water levels approach 4.80 m for Dar …


Requirements Of A Sustainable Pavement Management System For Tanzania, N. K.M. Mushule Jun 2002

Requirements Of A Sustainable Pavement Management System For Tanzania, N. K.M. Mushule

Tanzania Journal of Engineering and Technology (TJET)

Since the introduction of pavement management concepts in mid-1960s, more than three decades ago, a considerable number of Pavement Management Systems (PMS) have been developed and implemented widely in many parts of the world. These systems differ in scope and sophistication. However, in some cases, pavement management systems have fallen into marginal use, if not into complete disuse, because of a number of reasons. One of the major reasons leading to the marginalisation or abandonment of pavement management systems, is the failure of system developers to recognise specific and unique needs of the agency or authority responsible for road management. …


Bs News Jun 2002

Bs News

Building Services Engineering

No abstract provided.


Alternative Ways To Teaching Hvac And Related Subjects Through Actual Project Involvement-Three Case Studies, Samir F. Moujaes Jun 2002

Alternative Ways To Teaching Hvac And Related Subjects Through Actual Project Involvement-Three Case Studies, Samir F. Moujaes

Mechanical Engineering Faculty Research

No abstract provided.


Bi-Axially Loaded Slender Reinforced Concrete Columns Subjected To Sustained Loads, Song Gu May 2002

Bi-Axially Loaded Slender Reinforced Concrete Columns Subjected To Sustained Loads, Song Gu

Dissertations

A generalized analytical approach is presented in this research to predict the behavior both of slender and short reinforced concrete columns under sustained biaxial eccentric load.

The present analysis proposes equations established at a cross section of a reinforced concrete column by combining force equilibrium, constitutive law, and compatibility conditions. The strain and curvature of each section and the deflection of the column can then be obtained and resolved.

The established creep computation models, recommended separately by American Concrete Institute (ACI) 209R-92 and the Comite' Euro-International du Be'ton (CEB)-FIP 1990 Model Code have been used to calculate creep and shrinkage …