Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Keyword
-
- Architecture (12)
- Building (12)
- Construction (12)
- Engineering (12)
- Asphalt -- TestingPavements (1)
-
- Bituminous -- Testing (1)
- Bituminous materials -- DensityPavements (1)
- Buckling (Mechanics)Cylinders -- FatigueShells (Engineering)Thin-walled structures (1)
- Clay -- TestingPlasticityCationsIon exchange (1)
- Concentration (1)
- Concrete -- Additives -- TestingFlexureMaterials -- Compression testing (1)
- Concrete beams -- FatigueReinforced concreteReinforcing barsStrength of materials (1)
- Concrete beamsBending momentStrains and stresses -- Measurement (1)
- Concrete slabs -- EvaluationPlates (Engineering)Finite differences -- Computer programs (1)
- Concrete slabs -- TestingFlexure -- MeasurementStrength of materials (1)
- Critical (1)
- Development (1)
- Differential equations (1)
- Epoxy resinsSoils -- Missouri -- Phelps CountySoils -- Plastic properties -- Testing (1)
- Finite differencesPlates (Engineering) (1)
- Flow (1)
- Flume study (1)
- Folded plate structuresPlates (Engineering) (1)
- Folded plate structuresPlates (Engineering)RoofsStrains and stresses (1)
- Girders -- Fatigue -- TestingBending moment -- TestingOptical measurementsStructural analysis (Engineering) (1)
- Girders -- TablesPrestressed concrete -- TestingStructural frames -- Tables (1)
- High-gradient (1)
- Hydraulic jumpJets -- Fluid dynamicsHydraulics (1)
- Institution (1)
- Karst -- MissouriCarbonate rocks -- MissouriWater quality -- Missouri -- MeasurementWater quality -- Missouri -- Meramec Spring Region -- Measurement (1)
- Publication
- Publication Type
Articles 1 - 30 of 68
Full-Text Articles in Civil Engineering
The Irish Plumbing And Heating Engineer, December 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, December 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, November 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, November 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, October 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, October 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, September 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, September 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, August 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, August 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, July 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, July 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, June 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, June 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, May 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, May 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
Flume Study Of The Effect Of Concentration And Size Of Roughness Elements On Flow In High-Gradient Natural Channels, Mohamed Wafaie Abdelsalam
Flume Study Of The Effect Of Concentration And Size Of Roughness Elements On Flow In High-Gradient Natural Channels, Mohamed Wafaie Abdelsalam
All Graduate Theses and Dissertations, Spring 1920 to Summer 2023
In recent years investigators have given increased attention to flow in natural, high-gradient, rough, open channels. Studies include work in both the laboratory and in the field. Solutions to the problem are still incomplete; however, continued attention by investigators is needed to answer many questions. Using a laboratory flume, the writer studied one of the questions concerning the relative importance of gross velocity fluctuations versus turbulent mixing, and the ranges of each under different ranges of submergence and kineticity of flow. In the different ranges, the effect of size and concentration of the roughness elements was studied.
A Critical Analysis Of Water Rights And Institutional Factors And Their Effect On The Development Of Logan River, Frank W. Haws
A Critical Analysis Of Water Rights And Institutional Factors And Their Effect On The Development Of Logan River, Frank W. Haws
All Graduate Theses and Dissertations, Spring 1920 to Summer 2023
The physical setting of the Logan River Drainage Basin is first described with emphasis on the hydrologic and climatic factors that made the river an economic and social benefit.
The historical development of the river by man is then traced, and changes in water use patterns are pointed out. Methods used to administer water rights as water use patterns change is then described.
Legal controversies over water rights on the river are examined and methods of solving problems analyzed. A recent law suit between Logan City Corporation and the Logan River Water Users Association is examined in detail and the …
The Irish Plumbing And Heating Engineer, April 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, April 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, March 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, March 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
The Irish Plumbing And Heating Engineer, February 1965 (Complete Issue)
The Irish Plumbing And Heating Engineer, February 1965 (Complete Issue)
Building Services Engineering
No abstract provided.
Investigation Of The Use Of Optics In The Analysis Of Structures, Jimmy D. Hahs
Investigation Of The Use Of Optics In The Analysis Of Structures, Jimmy D. Hahs
Masters Theses
"This study was made to determine the feasibility of the use of optics in the analysis of structures. Since the curvature of a beam due to a loading condition is a function of the moment, a measure of this curvature is a measurement of the moment.
This study used the relationship between object size and image size formed by a concave or convex reflective surface to determine the radius of curvature and the moment at the point.
Overhanging simply supported beams of plexiglass with concentrated loads at various positions were used to demonstrate the developed optical theory. Optical measurements were …
The Effect Of Carbonate Karst Terrain On Water Quality, Robert Russell Kilgo
The Effect Of Carbonate Karst Terrain On Water Quality, Robert Russell Kilgo
Masters Theses
"The ever increasing use of water and unabated pollution of streams have made necessary increased research efforts into the quality and quantity of the available national water resources. Karst terrain is prevalent in several sections of the United States, however, little work has been done on the effect of this topography on water quality.
The purpose of this investigation was to determine the effect of carbonate karst terrain on the quality of water. The Meramec spring area, east of Rolla, Missouri, was selected for study. This area was underlain with dolomite formations and contains both karst and non-karst drainage basins …
Finite Difference Solution For Triangular Plates, Hao-Yang Huang
Finite Difference Solution For Triangular Plates, Hao-Yang Huang
Masters Theses
"In this thesis the finite difference method is used to solve triangular plates with uniformly distributed transverse load. As a matter of convenience triangular coordinates are used. The supporting conditions as well as the shape of plate are varied. All calculations are performed by digital computer. The patterns of differential operators in triangular coordinates, the deflections of plates, and the moment distributions are shown and discussed. The results obtained for some special cases are compared with published solutions"--Abstract, page i.
The Effect Of Epoxy Resins On The Plasticity Index Of An A-6 Soil, A. R. Van Steenbergen
The Effect Of Epoxy Resins On The Plasticity Index Of An A-6 Soil, A. R. Van Steenbergen
Masters Theses
"This thesis reports the results of an investigation of the variation in plasticity of a clayey soil after treatment with small quantities of epoxy resin and curing agent or with curing agent alone. The series of samples tested consisted of an A-6 soil obtained from the vicinity of Rolla, Missouri, combined with: 1. 0-3% of triethylenetetramine hereafter referred to as TETA. 2. 0-3% of diethylenetriamine hereafter referred to as DETA. 3. 0-3% of Araldite 6010 resin cured with TETA. The TETA content was varied form 20% to 100% of the resin by weight. 4. 0-3% Araldite 6010 resin cured with …
Analysis Of Continuous Folded Plate Roofs, Yung-Ping Wang
Analysis Of Continuous Folded Plate Roofs, Yung-Ping Wang
Masters Theses
"This work presents an analysis of continuous folded plate roofs considering the effects of relative joint displacements. For this analysis the normal modes of the lateral beam vibration were used as the form of the deflection curve and the loading was sinusoidal. By using symmetry and anti-symmetry, a possible method of analyzing prismatic folded plate roofs comprising one bay transversely but continuous over two or more spans longitudinally is suggested"--Abstract, page ii.
Comparison Of Measured And Calculated Stiffnesses For Lightweight Normal Concrete Beams, Raman Patel
Comparison Of Measured And Calculated Stiffnesses For Lightweight Normal Concrete Beams, Raman Patel
Masters Theses
"This study is a presentation of the findings involving experimental measurements of stiffness (EI) for different percentages of reinforcement steel in normal and lightweight concrete beams. The experimental values of stiffness are compared with calculated values obtained by applying the standard reinforced concrete theory. The measured values of stiffness obtained by the rotation method are compared with those obtained by the deflection method. Of the thirty beams that were tested, fifteen were tested for normal concrete and the remaining fifteen for lightweight concrete. Each of these beams were tested at different ages, ranging from seven to twenty-eight days.
The test …
Warping And Curling Of Plain Concrete Slabs, Vipinbhai Ratilal Shah
Warping And Curling Of Plain Concrete Slabs, Vipinbhai Ratilal Shah
Masters Theses
"The study was made to determine the effect of daily atmospheric temperature variation and curing on the warping and curling of plain concrete slabs and to study the effect of moisture on the warping of plain concrete slabs under nearly constant temperature conditions, by keeping the bottom surface of one slab wet and the other dry.
Daily observations consisted of dial gage readings to determine the progressive variations in warping contours due to typical daily temperature curling. Trends were found for three months of dial gage readings and interpreted in terms of warping and curling of the slabs.
The warping …
Analysis Of Flat Slabs With Various Edge Supports, Wu-Mo Chern
Analysis Of Flat Slabs With Various Edge Supports, Wu-Mo Chern
Masters Theses
"This study presents the solution of flat slabs with various edge conditions including T-Beam edge supports, The equations formulated are based on the finite difference method and solved using an electronic computer.
The results indicate that the solution of these slabs by the finite difference approximation is a practical method. In addition, this method is more flexible and yields moment values that are considerably more accurate than those obtained using the ACI Code"--Abstract, page ii.
The Transmission Of Loads To Point Bearing Piles In Sand Beneath Retaining Walls, Alan Albert Kamp
The Transmission Of Loads To Point Bearing Piles In Sand Beneath Retaining Walls, Alan Albert Kamp
Masters Theses
"An experimental investigation was made of the way in which loads were transmitted to point bearing H-piles in sand under a retaining wall. Using a plastic model, the moments and axial loads were determined along the length of the pile by measuring the strains with electric strain gages. A comparison was made of the experimental results at the top of the pile and the analytical results at this point; the latter obtained from the common practice used in design. The comparison was very poor because the excessive horizontal load (that part of the horizontal load which could not be carried …
Buckling Strength Of Titanium Alloy Columns In The Elastic And Inelastic Range, Richard O. Rintoul
Buckling Strength Of Titanium Alloy Columns In The Elastic And Inelastic Range, Richard O. Rintoul
Masters Theses
"The purpose of this study is to find experimentally the buckling strength of titanium alloy (Ti.-6Al.-4V.) columns and to determine a suitable equation to be used in the design of titanium columns in the elastic and inelastic range.
Effective length over radius of gyration ratios of from 178 to 16.1 were studied. High strength steel plates with cylindrical radii milled in the faces served as column ends while cylindrical radii ends were milled on the columns. SR-4 strain gages were used at the mid-points of all columns to determine lateral deflection and predict a theoretical buckling stress. Actual column loads …
The Influence Of Cation Exchange And Electrolyte Concentrations Upon The Atterberg Limits, Kent J. Schwieger
The Influence Of Cation Exchange And Electrolyte Concentrations Upon The Atterberg Limits, Kent J. Schwieger
Masters Theses
"The object of this investigation is to correlate relationships between cation exchange capacity, clay content, and type and concentration of the exchangeable cations upon the Atterberg limits of a soil. Synthetic soils consisting of loessial silt and either an illitic natural deposit, bentonite, ball clay, or kaolin clay were used.
As the percent clay fraction was increased the cation exchange capacity, liquid and plastic limits and plasticity index increased linearly in the clay range. Results also suggested a linear relationship between the liquid and plastic limits and the cation exchange capacity of soils of one hundred percent clay fraction"--Abstract, page …
Model Study Of A Folded Plate Roof, Graham G. Sutherland
Model Study Of A Folded Plate Roof, Graham G. Sutherland
Masters Theses
"The purpose of this study was to conduct a model study of a folded plate roof in order to determine the feasability [sic] of using model studies as a method of design. Dimensional analysis was used to derive prediction equations for determining the stresses in two prototype structures, when the stresses in the model were known. One model and two prototype folded plate roofs were constructed of plexiglas [sic]. SR-4 strain gages were attached to the structures and strain readings taken as a uniform vertical load was applied in increments. From the strains the stresses at various points in the …
Evaluation Of Pile Bearing Capacity By Use Of The Wave Equation, Stuart H. Williams
Evaluation Of Pile Bearing Capacity By Use Of The Wave Equation, Stuart H. Williams
Masters Theses
"The wave equation method of evaluating pile bearing capacity is investigated by using data obtained from a comprehensive pile testing program. Modifications which create a more accurate and realistic approach are made to the method proposed by previous investigators. With the use of these modifications, correlation between observed and computed results is more readily obtained. Selected pile formulas in the empirical, static, and dynamic categories are reviewed so that a direct comparison between these and the wave equation method can be made"--Abstract, page ii.
The Shear Graph And Cohesive Soil, Charles Rees Nickerson
The Shear Graph And Cohesive Soil, Charles Rees Nickerson
Masters Theses
"Some existing test procedures for measuring shearing properties of soils are reviewed. the correlation between the shear strength of two fine-grained soils as indicated by the unconfined compression test and the shear graph test is investigated. This is accomplished by comparing the test results at varying moisture contents and dry densities. One of the soils used is a red plastic clay, the other a silty clay. The test results indicate that for soils wet of optimum the shear graph strength can be taken as being equal to the unconfined compressive strength. This will be conservative for soils that exhibit an …
Effect Of Calcium Lignosulfonate On Properties Of Concrete At Early Ages, Lawrence Kong-Pu Wang
Effect Of Calcium Lignosulfonate On Properties Of Concrete At Early Ages, Lawrence Kong-Pu Wang
Masters Theses
"The objective of this investigation was to determine the effects of calcium lignosulfonate on the physical properties of concrete. Calcium lignosulfonate used as an admixture was tested for its effect on the tensile and compressive strength of plain concrete cylinders, and for its effect on the flexural strength of plain concrete beams. The effect of the admixture on shrinkage, slump, air content and unit weight was also studied. the test results showed that calcium lignosulfonate reduces the amount of water required to make a workable concrete mix; a more workable mix saves money because it is easier to place, thus …
Discharge Characteristics Of Side Weirs, Edgar Snowden
Discharge Characteristics Of Side Weirs, Edgar Snowden
Masters Theses
"The purpose of this study is to investigate the division of flow of water in a flume of rectangular cross-section when the flume is provided with a side weir. An equation has been derived so that the quantity of water flowing over the side weir compared to the quantity of water flowing in the main channel can be predicted. This ratio is acceptable only within the ranges of heads, velocities, and weir lengths imposed by the geometry of the system tested"--Abstract, page ii.
The Effect Of Nickel On Activated Sludge, James Robert Matthews
The Effect Of Nickel On Activated Sludge, James Robert Matthews
Masters Theses
"The primary objective of this investigation was to determine the effect of nickel on activated sludge over a comprehensive range of concentrations and to evaluate the ability of the sludge to acclimate and become more tolerant to the metal. Six one-liter fill and draw activated sludge units were fed domestic sewage; five of these units also received constant, increasing, and shock doses of nickel while the sixth was maintained as a control. Treatment efficiency was evaluated in terms of the chemical oxygen demand, suspended solids, and nickel content of the effluent. A Warburg respirometer was also employed and was operated …