Civil Engineering Commons^™

Steel-Concrete Composite Girder Experiments To Isolate Interface Load Transfer Effects On Stud Fatigue Life, Marc Crespi Hromcova

Graduate Theses and Dissertations

Metal fatigue resulting from repeated loading is a primary limit state that affects the quantity of headed shear studs required in the composite design of steel bridge girders. While concrete-deck-to-steel-superstructure load transfer is only considered through stud bearing in the American Association of State Highway Transportation Officials (AASHTO) design standards, friction and interface interlocking effects may also contribute. This study aims to experimentally quantify the effect of interface conditions on the fatigue life of headed studs within composite girders. In this study, two full-scale composite girder specimens having the same geometry and material properties are tested with two interface conditions. …

The State Of The City's Bridges, Leo G. Miranda

Capstones

An analysis by NYCity News Service of 2024 federal bridge inspection found that 118 segments of city bridges are in poor condition, around 8% of all bridges citywide. Among these are segments of major highways and bridges like the Brooklyn Queens Expressway, FDR Drive, Harlem River Drive, Grand Central Parkway and even a part of the iconic Brooklyn Bridge. On a single stretch of highway, where the Grand Central Parkway and the Whitestone Expressway meet in Queens, there are seven parts of highway or ramps in poor condition.

Bridge segments can be any raised roadway that passes over another parkway, …

Structural Performance And Resiliency Of Reinforced Concrete Bridge Pier Columns, Multi-Column Piers, And Bridge Systems Subjected To Multiple Hazards – Fire, Collision, And Air Blast, Qusai Abdulkarim Alomari

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Given their close proximity to traffic and improper employment of protective systems, bridges and bridge piers are vulnerable to multi-hazard events triggered by vehicle collisions coupled with correlated and cascading events, such as explosions and fires. Despite recent catastrophic incidents that have highlighted the profound consequences of these extreme demands, including substantial damage, adverse economic impact, and loss of life, there has been a notable lack of research investigating the performance of bridges and bridge structural components under the aforementioned multi-hazards. Furthermore, current bridge design codes do not address these events assuming that, after these destructive events, replacement of the …

Enhancing Construction Safety Training Of Bridges Using Augmented Reality And Virtual Reality, Mohamed Sherif Elrifaee

Theses and Dissertations

Infrastructure development projects are widely acknowledged as some of the most complex and challenging projects to undertake. The construction of bridges, in particular, has proven to be a significant safety risk for workers, with a considerable number of accidents reported on construction sites. There is a lack of comprehensive training programs specifically designed for bridge construction safety, and only a few studies have explored the use of both AR and VR to enhance safety training in construction. As such, this research aims to improve the safety of bridge construction sites through the implementation of Augmented Reality (AR) and Virtual Reality …

Numerical Simulation Of Hydrodynamic Forces On Riverine And Coastal Bridges Subjected To Extreme Weather Events, Fahad Pervaiz

Civil Engineering Dissertations - Archive

ABSTRACT: Recent bridge failures due to hurricane-generated storm surges and riverine flood events have highlighted the vulnerability of bridge infrastructure to extreme hydrodynamic loading. In addition to posing an immediate risk to human life, bridge failures can hinder evacuation planning and emergency response efforts. Changes in flood frequency and intensity due to climate change and urbanization may alter the hydrodynamic conditions along urban streams, further stressing bridge infrastructure designed based on historical flow conditions. As a result, quantifying the structural response and stability of bridges under current and future hydrodynamic conditions is crucial to improving transportation safety and efficiency. This …

Estimating The As-Placed Grout Volume Of Auger Cast Piles, Tristen Mee

USF Tampa Graduate Theses and Dissertations

Augered Cast-in-Place (ACIP) piles are a geotechnical foundation element increasingly used to support large publicly funded structures as an alternative to drilled shafts or driven piles. ACIP piles are constructed by drilling an excavation to the full length of the designed pile with a continuous flight auger. Grout (cement, sand, and water mixture) is then pumped through the hollow auger stem to begin grouting the excavation. After establishing an initial head pressure, the auger is slowly extracted while the remainder of the pile is grouted. Once the auger is completely removed, the steel reinforcement cage is lowered into the grouted …

Comparative Analysis Of Bridge Abutment Types, David Fell

Williams Honors College, Honors Research Projects

This project was developed to serve as a brief overview of design practices and considerations in the selection of highway bridge abutment types. This involved a review of literature in the form of reviewing national design guides and department of transportation (DOT) requirements from both US DOTs and international DOTs. The abutment types covered in this research included conventional reinforced concrete abutments with bearings, integral abutments, and semi-integral abutments. This research focused solely on highway bridge abutments, particularly on Ohio Department of Transportation design requirements due to their extensive use of semi-integral abutments. Superstructure elements and geometric requirements are primary …

Reliability Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The reliability of reinforced concrete bridge columns strengthened with externally bonded, steel-fiber reinforced polymer fabric subjected to blast loads was investigated. Columns were modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. Different concrete strengths, longitudinal reinforcement ratios, and gravity and blast load levels were considered, while uncertainties in material strength and stiffness parameters, as well as load characteristics, were incorporated in the probabilistic analysis. It was found that the use of SFRP can allow significant increases in blast load while maintaining the same level of column reliability.

Effectiveness Of Seismic Bearings On A Typical Isolated Two-Column Rc Bridge Pier Located In North Mississippi, Hemant Raj Joshi

Electronic Theses and Dissertations

The 2020 ASCE infrastructure report card has assigned a letter grade of D- for bridges in Mississippi based on poor to fair condition ratings with many approaching the end of their useful service lives. Bridges in northern Mississippi lie up to 100 miles from the New Madrid Fault and fall into the Region 3 Seismic Performance Category defined by AASHTO. The primary objective of this study is to evaluate the performance of commercially available bridge bearings on a common bridge pier type used in northern MS under the combined action of superstructure gravity and lateral seismic loads. The use of …

Laboratory Study Of Hydrodynamics Of Submerged Bridges, Max Thomson Dean

Civil Engineering Theses - Archive

Bridges are designed to withstand flood and debris loads; however, it is reported that 53% of bridge failures in the U.S. are caused by hydraulic events, including floods, scour, debris, and drifts. A series of scale flume experiments were conducted to determine flood force effects on bridge superstructures. 1:50 scale models of the Texas Department of Transportation’s typical reinforced concrete bridge superstructures were tested. The bridge superstructures included beams (TX28 and TX54 girders, slab beams, and box beams) and an accompanying bridge deck and railing. The drag and lift forces and overturning moments were measured by load sensors for various …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Lidar Assessment To Monitor Bridge Response Under Live And Dead Loads, Daniel Watson

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Understanding how a bridge structure responds to various loads in a time and resource-efficient approach is vital in characterizing bridge health. Bridge health monitoring is an evaluation of the structural condition and performance, which optimizes limited transportation budgets by prioritizing the bridges that are in the most need for retrofit or replacement. Identifying and remedying issues will mitigate long-term problems and ensure that the bridge remains open to service for all legal loads. In contrast, health monitoring and load rating will determine if a bridge can only carry traffic up to a certain weight or speed, requiring a bridge load …

Experimental Investigation Of Utilizing Steel Fiber As Concrete Reinforcement In Bridge Decks, Samed Al Khafaji

Civil Engineering Theses - Archive

Research on utilizing steel fiber vs concrete reinforcement in bridge deck to replace more traditional reinforcing bars is sparse, therefore a research into this topic is interesting to identity opportunities for speeding up of construction by avoiding laying and tying reinforcement and verifying clear cover to reinforcing bars which is one of the most time-consuming processes involved in construction. This study investigates the efforts of steel fiber on the bridge deck from the strength and economical implementation. Four concrete mix design with vary steel fiber dosages of 0.0%, 0.5%, 1.0%, and 1.5% used in this study. The physical properties of …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Program: Senior Projects (Public)

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Bridges - Barren County, Kentucky (Sc 3308), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid and scan (Click on "Additional Files" below) for Manuscripts Small Collection 3308. Specifications, including sketches, for the construction of a bridge across Skaggs Creek in Barren County, Kentucky. The detailed specifications as to design, dimensions, materials, and method of construction were prepared by a commission appointed by the Barren County Court. Unable to secure a bid to erect the bridge for the appropriated sum of $1,000, the commission recommended an additional appropriation in order to accept a bid of $1,200.

Novel Infrastructure Monitoring Using Multifaceted Unmanned Aerial Vehicle Systems - Close Range Photogrammetry (Uav - Crp) Data Analysis, Surya Sarat Chandra Congress

Civil Engineering Dissertations - Archive

Remote sensing is a method of collecting data without making any physical contact with the object under inspection. Modern day remote sensing kicked off with the invention of the camera and continued on to the invention of advanced satellite mounted sensors. Photogrammetry is defined as a science that measures distances using one or more images captured remotely. Remote collection of images within a range of 1000 ft is termed close-range photogrammetry (CRP). Unmanned aerial vehicle systems (UAV or UAS) have become a popular means of remotely gathering information and assessing infrastructure conditions due to their versatile nature. Multirotor and fixed-wing …

Load Distribution Of Adjacent Prestressed Concrete Box Beam Bridges, Luis F. Urrego, Ryan T. Whelchel, Robert J. Frosch, Christopher S. Williams

The Summer Undergraduate Research Fellowship (SURF) Symposium

One of the most common bridge types is the adjacent prestressed concrete box beam bridge because the system is economical and simple to build; over 43,000 are currently in service within the US. However, they are highly susceptible to strand corrosion and concrete deterioration which can result in early loss of load capacity. Therefore, an experimental program sponsored by the Indiana Department of Transportation (INDOT) was initiated to determine the behavior of deteriorated beams and develop recommendations for load rating and design of this bridge type. Displacement sensors were installed on a bridge in service to measure its deformation under …

Experiences Of Public Agency Managers When Making Outsourcing Decisions, Shakeel Baig

Walden Dissertations and Doctoral Studies

Managers in state transportation agencies in the United States must frequently choose between using the talents and abilities of in-house staff or outsourcing for road and bridge design projects. Budgetary crises have strongly affected funding for transportation infrastructure. Facing budgetary pressures to suppress costs, managers must frequently make the choice of outsourcing a project or performing it in-house. Yet, decision-making models for these decisions are inadequate. The purpose of this phenomenological study was to explore and describe the lived experiences of public agency managers when making decisions to outsource the core government functions such as road and bridge design projects. …

Bridge Maintenance To Enhance Corrosion Resistance And Performance Of Steel Girder Bridges, Luis M. Moran Yanez

Open Access Dissertations

The integrity and efficiency of any national highway system relies on the condition of the various components. Bridges are fundamental elements of a highway system, representing an important investment and a strategic link that facilitates the transport of persons and goods. The cost to rehabilitate or replace a highway bridge represents an important expenditure to the owner, who needs to evaluate the correct time to assume that cost. Among the several factors that affect the condition of steel highway bridges, corrosion is identified as the main problem. In the USA corrosion is the primary cause of structurally deficient steel bridges. …

Bridge End Settlement Evaluation And Prediction, Jiwen Zhang, Timothy R. Taylor, Roy E. Sturgill

Kentucky Transportation Center Research Report

A bridge approach is usually built to provide a smooth and safe transition for vehicles from the roadway pavement to the bridge structure. However, differential settlement between the roadway pavement that rests on embankment fill and the bridge abutment built on more rigid foundation often creates a bump in the roadway. Previous work examined this issue at a microscopic level and presented new methods for eliminating or minimizing the effects at specific locations.

This research studies the problem at a macroscopic level by determining methods to predict settlement severity; this assists designers in developing remediation plans during project development to …

Montell, William Lynwood, 1931-2023 (Fa 958), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 958. Project titled: [Student Collections: Bridges] Includes survey sheets of descriptions of various type of bridges in the counties of Adair, Bourbon, Breathitt, Casey, Clark, Clinton, Cumberland, Green, Hardin, LaRue, Lincoln, Marion, Mercer, Metcalfe, Montgomery, Nelson, Russell, Taylor, Washington in Kentucky, Connecticut, and Ohio. Sheets include a description, informant’s name, terms, and photos of bridges.

Impact Of Extreme Summer Temperatures On Bridge Structures, Ryan Hagedorn

Graduate Theses and Dissertations

Climate change and its effect on weather in the United States is a well-documented phenomenon. In particular, extreme heat waves have become more intense, more frequent, and longer lasting, especially in the southern United States. As with much of America’s transportation infrastructure, prestressed concrete bridge girders experience the effects of these heat waves. Uneven heating of optimized bridge girder sections results in large non-linear temperature gradients. In this study, temperature was monitored in three different AASHTO I-girders to determine the vertical and transverse temperature gradients in a pre-deck placement condition. It was determined that the current design standard, which uses …

Identifying And Modelling Permit Trucks For Bridge Loading, Bernard Enright, Eugene J. Obrien, Cathal Leahy

Articles

Accurate estimates of characteristic traffic load effects are essential in order to optimize bridge safety assessment. Permit trucks dominate the extreme upper tail of the truck loading distribution and as a result need careful examination. This paper proposes rules for filtering these trucks from Weigh-In-Motion data for both the US and Europe. The importance of these trucks in critical bridge loading events is then examined for both regions. A Monte Carlo traffic simulation model is developed which focuses on the accurate simulation of permit trucks.

The Role Of Shrinkage Strains Causing Early-Age Cracking In Cast-In-Place Concrete Bridge Decks, Tayyebeh Mohammadi, Baolin Wan, Christopher M. Foley

Civil and Environmental Engineering Faculty Research and Publications

Early-age cracking in cast-in-place reinforced concrete bridge decks is occurring more frequently now than three decades ago and principle factors that lead to early-age deck cracking are not fully understood. A finite element (FE) simulation methodology for assessing the role of shrinkage-induced strains in generating early-age bridge deck cracking is described. The simulations conducted indicate that drying shrinkage appears to be capable of causing transverse (and possibly longitudinal) bridge deck cracks as early as 9 to II days after bridge deck placement. The drying-shrinkage induced stresses would result in transverse cracking over interior pier supports in a typical bridge superstructure …

Seismic Performance Of Precast Girder-To-Cap Beam Connections Designed For Abc, Sri Sritharan, Justin Vander Werff, Robert Peggar, Ron Bromenschenkel

Faculty Work Comprehensive List

The behavior of critical connections between prefabricated elements in bridges utilizing accelerated bridge construction (ABC) methods continues to be of utmost interest. Some of these connections will experience excessively high demand in regions that are susceptible to high seismic load. This paper presents a large-scale experimental study that investigated seismic performance of the connection between precast concrete I-shaped girders and a concrete inverted-tee cap beam using two different details. The ability of the girder-to-cap connection to successfully resist positive moment and the corresponding shear under combined gravity and seismic effects was of particular interest. The effect of vertical seismic acceleration …

Performance Of Frp-Retrofitted Concrete Bridge Columns Under Blast Loading, R. Zheng, P. Zohrevand, H. Erdogan, Amir Mirmiran

Civil Engineering Faculty Publications and Presentations

Contrary to military or essential government buildings, most bridges are designed without any consideration for blast resistance. Fiber-reinforced polymers (FRPs) can provide an effective means for strengthening of critical bridges against such loading. This study has focused on the effectiveness of FRP retrofitting in the dynamic response of reinforced concrete bridge columns under blast loading. Using a simplified equivalent I-section with a virtual material lumped at the two flanges; a lightly meshed uniaxial finite element model was developed and successfully validated against previous studies. The proposed model was then used for a thorough parametric study on the blast resistance of …

Instrumentation To Monitor Bridge Foundation On The Crosstown Project, Brian Welch

Journal of Undergraduate Research at Minnesota State University, Mankato

The Crosstown Bridge Monitoring Project is located at the intersection of Highway 62 and Interstate I35W a few miles south and west of downtown Minneapolis. The bridge being evaluated is at a railroad overpass located midway along the Crosstown expansion. This research project involved placing instrumentation on the bridge foundation in order to measure the change in the foundation loading during the course of the construction project. For several years there have been questions pertaining to the forces in the pile foundations that support highway embankments. This project placed strain gages on the pile foundations in order to monitor these …

Multiple Reference Impact Testing Of Bridges Using A Network Of Low-Cost Dynamic Exciters, James David Lindsey

Graduate Theses and Dissertations

Multiple Reference Impact Testing (MRIT) is a form of Experimental Modal Analysis (EMA) that can be used to identify the dynamic properties of full-scale bridges. These dynamic properties include natural frequencies, mode shapes, damping ratios, modal scaling and modal flexibility. Since these system properties that are directly related to the mass and stiffness characteristics of a structure, impact test measurements can be used to quantitatively characterize condition of a structure. Over time, changes in the properties can be monitored and evaluated as indicators of damage or deterioration. Instrumented hammers and drop masses are typically used to perform MRIT by providing …

Shakers - South Union, Kentucky (Sc 1328), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid only for Manuscripts Small Collection 1328. Letters, written by South Union, Kentucky Shaker leaders, to leaders of the Hancock Shaker Society, Pittsfield, Massachusetts, discussing the building of mills and dam, economic conditions, and religious affairs. The original letters are in the Library of Congress.