Engineering Commons^™

Ultra-Sustainable Fe78si9b13 Metallic Glass As A Catalyst For Activation Of Persulfate On Methylene Blue Degradation Under Uv-Vis Light, Zhe Jia, Xiaoguang Duan, Wenchang Zhang, Weimin Wang, Hongqi Sun, Shaobin Wang, Laichang Zhang

Research outputs 2014 to 2021

Stability and reusability are important characteristics of advanced catalysts for wastewater treatment. In this work, for the first time, sulfate radicals (SO4∙−) with a high oxidative potential (Eo = 2.5–3.1 V) were successfully activated from persulfate by a Fe78Si9B13 metallic glass. This alloy exhibited a superior surface stability and reusability while activating persulfate as indicated by it being used for 30 times while maintaining an acceptable methylene blue (MB) degradation rate. The produced SiO2 layer on the ribbon surface expanded strongly from the fresh use to the 20th use, providing stable protection of the buried Fe. MB degradation and kinetic …

Structural Geodesic-Tchebychev Transform: An Image Similarity Measure For Face Recognition, Ali Nadhim Razzaq, Zahir Hussain, Hind Rustum Mohammed

Research outputs 2014 to 2021

This work presents a new holistic measure for face recognition. Face recognition involves three steps: Face Detection, Feature Extraction and Matching. In the face detection process to identify the face area in face images, Viola-Jones algorithm has been used. Feature extraction is based on performing double-transformation, where discrete Tchebychev transform is performed on the geodesic distance transform of the grayscale image. Structural Similarity (SSIM) is applied to the resulting image double-transform to find matching factor with other image faces in the FEI (Brazilian) database. Performance is measured using a confidence criterion based on the similarity distance between the recognized person …

Computational Assessment Of Neural Probe And Brain Tissue Interface Under Transient Motion, Michael Polanco, Sebastian Bawab, Hangsoon Yoon

Mechanical & Aerospace Engineering Faculty Publications

The functional longevity of a neural probe is dependent upon its ability to minimize injury risk during the insertion and recording period in vivo, which could be related to motion-related strain between the probe and surrounding tissue. A series of finite element analyses was conducted to study the extent of the strain induced within the brain in an area around a neural probe. This study focuses on the transient behavior of neural probe and brain tissue interface with a viscoelastic model. Different stages of the interface from initial insertion of neural probe to full bonding of the probe by astro-glial …

การพัฒนาแนวทางในการปรับยกระดับระบบบริหารคุณภาพจาก Iso 9001:2008 สู่ Iso 9001:2015, อัครพันธ์ จันทร์เสงี่ยม

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีจุดมุ่งหมายเพื่อประยุกต์การบริหารการเปลี่ยนแปลงในการปรับเปลี่ยนระบบบริหารคุณภาพ ISO 9000 ซึ่งปัจจุบันได้มีการปรับเปลี่ยนจากระบบบริหารคุณภาพ ISO 9001:2008 มาเป็นระบบบริหารคุณภาพ ISO 9001:2015 การเปลี่ยนแปลงนี้เป็นการเปลี่ยนแปลงที่เกิดจากภายนอกองค์กร (External Change) โดยองค์กรที่ได้รับการรับรองระบบ ISO หรือองค์กรที่ต้องการต่อใบรับรองต้องดำเนินการให้เหมาะสม งานวิจัยนี้เป็นการประยุกต์ใช้ขั้นตอนเพื่อการบริหารการเปลี่ยนแปลงให้บรรลุเป้าหมาย 8 ประการ ดังนี้ 1) สร้างสำนึกความจำเป็นเร่งด่วนที่ต้องเปลี่ยนแปลง 2) สร้างขุมพลังในการนำการเปลี่ยนแปลง 3) กำหนดวิสัยทัศน์และแผนการเปลี่ยนแปลงเชิงกลยุทธ์ 4) สื่อสารวิสัยทัศน์เพื่อสร้างการสนับสนุน 5) การดำเนินการเพื่อขจัดอุปสรรคของการเปลี่ยนแปลง 6) กำหนดเป้าหมายระยะสั้น และวางแผนเพื่อให้บรรลุเป้าหมาย 7) เสริมแรงการเปลี่ยนแปลงเพื่อการพัฒนาอย่างยั่งยืน 8) ปลูกฝังสิ่งที่เปลี่ยนแปลงให้เป็นส่วนหนึ่งของวัฒนธรรมบริษัท โดยแต่ละขั้นตอนได้นำเอาแนวคิดและทฤษฎีที่เกี่ยวกับการบริหารการเปลี่ยนแปลง เช่น แนวคิดเกี่ยวกับการต้านทานการเปลี่ยนแปลง (Force Field Analysis) การทดสอบความพร้อมในการเปลี่ยนแปลง (TROPICS Test) การศึกษาสภาพแวดล้อมองค์กร การวางแผนกลยุทธ์องค์กร การประเมินความเสี่ยง เป็นต้น มาประยุกต์ใช้เพื่อให้เกิดการเปลี่ยนแปลงได้อย่างมีประสิทธิผล และในงานวิจัยนี้ยังได้นำกระบวนการบริหารการเปลี่ยนแปลงของระบบบริหารคุณภาพนี้ ไปประยุกต์ใช้กับบริษัทกรณีศึกษาบริษัทผลิตโคมไฟ ซึ่งเป็นบริษัทผลิตโคมไฟลำดับแรกๆของประเทศ โดยผลของการประยุกต์ใช้ในครั้งนี้ส่งผลให้สามารถพัฒนากรอบการบริหารการเปลี่ยนแปลงเพื่อปรับเปลี่ยนระบบบริหารคุณภาพได้อย่างมีประสิทธิภาพ

Capturing The Big Picture: The 2015 Capstone Design Survey, Susannah Howe

Engineering: Faculty Publications

No abstract provided.

Controlled Meteorological (Cmet) Free Balloon Profiling Of The Arctic Atmospheric Boundary Layer Around Spitsbergen Compared To Era-Interim And Arctic System Reanalyses, Tjarda J. Roberts, Marina Dütsch, Lars R. Hole, Paul Voss

Engineering: Faculty Publications

Observations from CMET (Controlled Meteo- rological) balloons are analysed to provide insights into tropospheric meteorological conditions (temperature, hu- midity, wind) around Svalbard, European High Arctic. Five Controlled Meteorological (CMET) balloons were launched from Ny-Ålesund in Svalbard (Spitsbergen) over 5–12 May 2011 and measured vertical atmospheric profiles over coastal areas to both the east and west. One notable CMET flight achieved a suite of 18 continuous soundings that probed the Arctic marine boundary layer (ABL) over a period of more than 10 h. Profiles from two CMET flights are compared to model output from ECMWF Era-Interim reanal- ysis (ERA-I) and to …

Phase I Inspection Of The Stay Cable System On The Us 231 William H. Natcher Bridge Over The Ohio River, Theodore Hopwood Ii, Sudhir Palle, Danny Wells, Bobby W. Meade, Jared Fairchild, Christopher Goff

Kentucky Transportation Center Research Report

The US 231 Natcher Bridge was opened in 2002. By 2006 cracking was observed in the plastic piping that protected the stay cable strands from the environment at both the deck and tower anchorages. Over time the extent of cracking increased and an investigation was initiated to assess the types of deterioration impacting the cables, their causes and their impacts on the integrity of the stay cables.

From 2012-2015, a series of in-depth field inspections were performed using visual and nondestructive testing. Most of this work focused on the piping at the deck anchorages. The inspections disclosed voids in cable …

High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane

Theses and Dissertations

High-temperature, high-pressure (HTHP) conditions are exemplified in ultra-deep petroleum reservoirs and can be exhibited within diesel engines. Accurate pure component hydrocarbon data is essential in understanding the overall behavior of petroleum and diesel fuel at these conditions. The present study focuses on the HTHP properties of toluene since this hydrocarbon is frequently used to increase the octane rating of gasoline and toluene occurs naturally in crude oil. In this thesis experimental densities and viscosity are presented to 535 K and 300 MPa extending the database of toluene viscosity data to higher temperature than previous studies. The data is correlated to …

Drying Methods For The Fabrication Of Polymer Foam Material, Dalton Echard

Theses and Dissertations

This is a report on the study of the drying of nanoporous polymer foam material fabricated by photolithogtaphic methods. Three drying methods were employed, which were air drying, supercritical drying and freeze drying. After fabrication and drying, physical properties of the polymer foams were measured. These measurements included density of the material, Young’s modulus, surface area, and the shape of the skeletal particles. The measurements determined the effect of the polymer concentration and the effect of drying methods. It was determined that polymer concentration had a much larger effect on the properties of the materials than the drying method.

Modeling Time-Dependent Performance Of Submerged Superhydrophobic Or Slippery Surfaces, Ahmed A. Hemeda

Theses and Dissertations

The goal of this study is to quantify the transient performance of microfabricated superhydrophobic surfaces when used in underwater applications. A mathematical framework is developed and used to predict the stability, longevity, and drag reduction benefits of submerged superhydrophobic surfaces with two- or three-dimensional micro-textures. In addition, a novel design is proposed to improve the drag-reduction benefits of lubricant-infused surfaces, by placing a layer of trapped air underneath the lubricant layer. The new design is referred to as lubricant–infused surfaces with trapped air, and it is designed to eliminate the long-lasting longevity problem of submerged superhydrophobic surfaces. The effectiveness of …

Hpc Enabled Data Analytics For High-Throughput High-Content Cellular Analysis, Ross A. Smith, Rhonda J. Vickery, Jack Harris, Sara Gharabaghi, Thomas Wischgoll, David Short, Robert Trevino, Steven A. Kawamoto, Thomas J. Lamkin, Kevin Schoen, Eric E. Bardes, Scott C. Tabar, Bruce J. Aronow

Computer Science and Engineering Faculty Publications

Biologists doing high-throughput high-content cellular analysis are generally not computer scientists or high performance computing (HPC) experts, and they want their workflow to support their science without having to be. We describe a new HPC enabled data analytics workflow with a web interface, HPC pipeline for analysis, and both traditional and new analytics tools to help them transition from a single workstation mode of operation to power HPC users. This allows the processing of multiple plates over a short period of time to ensure timely query and analysis to match potential countermeasures to individual responses.

An Efficient Hybrid Eye Detection Method, Mingxin Yu, Yingzi Lin, Xiangzhou Wang

Turkish Journal of Electrical Engineering and Computer Sciences

Eye detection is the most important and critical task of diverse applications such as face detection and recognition. However, most eye detection methods do not fully consider detection robustness to people with glasses, illumination variation, head pose change, and eye occlusions. This paper proposes an efficient hybrid eye detection method based on a gray intensity variance filter (VF) and support vector machines (SVMs). Firstly, the VF is used for eliminating most of noneye region images to keep less candidate eye regions. Then accurate two eye regions are determined easily through the trained SVM classifier. Moreover, this paper provides an assessment …

The Journal Of Undergraduate Research

The Journal of Undergraduate Research

This is the complete issue of the South Dakota State University Journal of Undergraduate Research, Volume 14.

Effect Of Poisson’S Ratio On Material Properties Characterization By Nanoindentation With A Cylindrical Flat Tip Indenter, Md Mehadi Hassan

Electronic Theses and Dissertations

Nano indentation technology is commonly used to determine the mechanical properties of different kinds of engineering materials. The young’s modulus of the materials can be calculated with the load depth data obtained from an indentation test with a known Poisson’s ratio. In this investigation the NANOVEA micro/nanoindentation tester with a cylindrical flat-tip indenter will be used to find the elastic modulus, hardness and Pile up. Low carbon steel AISI1018, alloy steel AISI 4340 and aluminum alloy 6061 were selected for the case study. Finite element (FE) analysis using axisymmetric 3-D models used to establish the relationship between Poisson’s ratio and …

Remote Sensing Of Neutron And Gamma Radiation Using Aerial Unmanned Autonomous System, Alex Barzilov, Jessica Hartman, Ivan Novikov

Graduate & Professional Student Association Research Forum

With the continuing advancement of nuclear technologies, the detection and identification of radioactive material is a necessary part of commercial and government applications. There is a wide array of options available for detection and identification of material, but most rely on compact devices which are manually positioned. The deployment of robots equipped with detection equipment is not always feasible, especially in locations where there is considerable debris on the ground, or where there are low clearance areas. To solve this, the goal of this research was to design a remote sensing system for radiation using unmanned aerial vehicles (UAVs). A …

Feature Coverage Indexes For Dual Homography Estimation In Constructing Panorama Image, Kyungkoo Jun, Si Kim

Civil and Environmental Engineering and Construction Faculty Research

Enlarged images can be obtained by various methods. Stitching is one of the efficient methods. It can produce panoramic images by stitching adjacent images which contain overlapping regions even though they are obtained through separate image sensors. Images that contain multiple different planes are hard to be stitched together because each plane has a different homography matrix for perspective warping. For this, a dual homography was proposed. However its performance varies depending on feature detectors which are used to find matching feature points between images. In this paper, we propose three feature coverage indexes which evaluate the stitching performance of …

Risks Involved In Using Alternative Project Delivery (Apd) Methods In Water And Wastewater Projects, Pramen Shrestha, J Batista, R Maharajan

Civil and Environmental Engineering and Construction Faculty Research

There are risks involved in the design and construction of projects, and several studies have been conducted in identifying the risks involved in using traditional delivery method (Design Bid Build) in the design and construction of the projects. However, little research has been done in identifying the risks involved in using Alternative Project Delivery (APD) methods in the design and construction of water and wastewater projects. The identification of these risks could assist in improving project performance of future projects that use APD methods. A survey was conducted to identify the risks involved in using APD methods for the design …

The Effects Of Carbon Fiber Misalignment On Composite Material Strength, Luke Stangler

Electronic Theses and Dissertations

Nondestructive Evaluation (NDE) is an effective way for determining material properties. More specifically, ultrasonic waves along with visual measurements from a microscope can be used to systematically determine the elastic modulus of single ply composites that are subject to an altered manufacturing process. In this approach, the magnitude of specific ultrasonic wave velocities is applied through Chirstoffel's equations to determine the necessary five elastic constants that describe the elastic modulus of transversely isotropic composites. On the other hand, fiber misalignment measurements are taken through via digital microscopy to satisfy a statistical approach for the determination of the same elastic modulus. …

Understanding The Impact Of Non-Thermal Processing And Co2 Assisted Extrusion On Antioxidant, Textural And Functional Properties Of Corn, Sorghum And Apple Pomace Based Extrudates, Umesh Chandra Lohani

Electronic Theses and Dissertations

Currently, there is a worldwide demand for antioxidant rich foods in diet, especially ready to eat foods, i.e. cereals and snacks. In recent years, the research has got momentum to valorize the underutilized crops, i.e. millet, sorghum and industrial food by-products, i.e. fruit pomace to incorporate into main stream of human diet due to their enrichment in nutritional as well as bioactive compounds like phenolic and flavonoid antioxidants. However, most of the phenolic compounds in plant are present in the bound form with the carbohydrates, lignin, pectin and proteins which reduces their ability to function as good antioxidants. Therefore, in …

Distributed Rule-Based Ontology Reasoning, Raghava Mutharaju

Browse all Theses and Dissertations

The vision of the Semantic Web is to provide structure and meaning to the data on the Web. Knowledge representation and reasoning play a crucial role in accomplishing this vision. OWL (Web Ontology Language), a W3C standard, is used for representing knowledge. Reasoning over the ontologies is used to derive logical consequences. A fixed set of rules are run on an ontology iteratively until no new logical consequences can be derived. All existing reasoners run on a single machine, possibly using multiple cores. Ontologies (sometimes loosely referred to as knowledge bases) that are automatically constructed can be very large. Single …

Customizable 3-D Virtual Gi Tract Systems For Locating, Mapping, And Navigation Inside Human Gastrointestinal Tract, Megha Dattatrey Dalvi

Browse all Theses and Dissertations

One of the critical challenges of wireless capsule endoscopy examination is to find the exact position of the capsule in the Gastrointestinal Tract (GI) tract so as to correctly and accurately spot the position of the intestinal diseases. Creating a 3D virtual GI tract system could significantly improve the capsule endoscopy operations. The virtual human model, such as the BioDigital Human, has been credited as Google Earth for the human body, which provides us medically accurate virtual body and organ structures. However, it only assembles a “Standard” human body. The problem is: there is only one earth, but billions of …

Augment Hololens’ Body Recognition And Tracking Capabilities Using Kinect, Krishna Chaithanya Mathi

Browse all Theses and Dissertations

In this thesis, we are primarily interested in exploring the HoloLens technologies for medical practices. Particularly, we will address the limitation of HoloLens’ capability in human body sensing, recognition and tracking. We will then introduce and demonstrate the use of Kinect to augment HoloLens’ sensory and processing capabilities in order to produce time and space-synchronized immersive environment with both virtual body and real body of the same patient for supporting distributed medical collaborations. Specifically, we are looking at a distributed solution in which we are collecting the patient body data from Kinect, followed by body recognition and position/motion tracking processing …

Novel Cost And Space Efficient Range Of Motion And Gait Analysis Systems, Rutvik Bharatkumar Patel

Browse all Theses and Dissertations

In this thesis, we have explored the use of the latest motion tracking technologies, as evident by Microsoft Xbox Kinect’s motion tracking capabilities, in combination with 3D digital human modeling and animation, multi-modality image capturing and processing, and fusion, to design a new generation of low-cost range of motion and gait analysis solutions that overcome the limitation of existing tools. The proposed solutions and our prototype systems have demonstrated accurate measurements and reliable analysis outcome compared to current clinic practices, with significantly reduced complexity and cost. Furthermore, it eliminates the need for expensive effort for pre- and post- processing of …

Adaptive Power Analog-To-Digital Interface For Digital Systems, Todd S. Grimes

Browse all Theses and Dissertations

Today many consumer, industrial, and military electronic systems are digital in nature and are utilized for multiple applications. Many of these systems were designed to be portable and generally have limited capabilities because of size, weight, and power requirements. The last several decades have seen the push for more power efficient electronics. Thus, researchers and scientists investigated advanced process technologies and more power efficient circuit implementations. This research is concerned with classes of applications intended to operate over long periods of time with a low duty cycle, but are subject to bursts of information, requiring high processing capabilities. Specifically, this …

Assessing Leanness Level With Demand Dynamics In A Multi-Stage Production System, Rehab M. Ali, Ahmed Deif

Industrial Technology and Packaging

Purpose

Design/methodology/approach

Development Of An In Vitro, Three-Dimensional Microvasculature Model, Lauren Elizabeth Marshall

All ETDs from UAB

Vascularized in vitro models of breast cancer represent an important advance in preclinical drug testing and development. 3D in vitro tissue models are more physiologically-relevant than 2D cell culture models due to the combination of human cells and extracellular matrix (ECM) in a spatial 3D microarchitecture. Embedding a vasculature within a 3D tissue volume further increases its physiological relevance and enables paracrine cross-talk with other cell types, neovascularization and angiogenesis, size-selective permeability between blood flow and extravascular ECM, delivery of therapeutics and metabolized products to solid tumors, delivery of circulating tumor cells to metastatic sites, and production of growth-promoting and …

Density Functional Theory Calculations On The Doping Sequence Of Mnxfen(1-X)Ge, Jordan C. Ball

Honors Capstones

No abstract provided.

Aconitic Acid, Glycerol And Cinnamic Acid Polyester Characterization For Bone Tissue Engineering, Katie Joanna Hogan

Honors Capstones

No abstract provided.

A Comparison Of Rule-Based Analysis With Regression Methods In Understanding The Risk Factors For Study Withdrawal In A Pediatric Study, Mona Haghighi, Suzanne B. Johnson, Xiaoning Qian, Kristian F. Lynch, Kendra Vehik, Shuai Huang, The Teddy Study Group

Industrial and Management Systems Engineering Faculty Publications

Regression models are extensively used in many epidemiological studies to understand the linkage between specific outcomes of interest and their risk factors. However, regression models in general examine the average effects of the risk factors and ignore subgroups with different risk profiles. As a result, interventions are often geared towards the average member of the population, without consideration of the special health needs of different subgroups within the population. This paper demonstrates the value of using rule-based analysis methods that can identify subgroups with heterogeneous risk profiles in a population without imposing assumptions on the subgroups or method. The rules …

Effects On Phased Arrays Radiation Pattern Due To Phase Error Distribution In The Phase Shifter Operation, Guiseppe Coviello, Gianfranco Avitabile, Giovanni Piccinni, Giulio D'Amato, Claudio Talarico

Electrical & Computer Engineering Faculty Scholarship

A comprehensive study on the role of the phase errors distribution on the performances of the phased array systems has been produced. The analysis is brought out using a complete and behavioural model for radiation-pattern characteristics. The study has shown how the phase errors distribution actually affects the performances demonstrating that the rms phase error is a valuable figure of merit of phased array systems but it is not sufficient to completely describe the behaviour of a real system. The paper demonstrates that the antennas array beam shape is depending by the actual error phase distribution and that a good …