Engineering Commons^™

Co-Designing Manufacturing Systems For Robustness And Resilience: A Decision-Based Design Perspective, Mathew Baby

Theses and Dissertations

Manufacturing systems (MSs) comprise various stakeholders associated with the manufacture and supply of products required by customers and are interrelated by the flow of materials and information. The interrelated stakeholders make system-specific decisions and stakeholder-specific decisions across multiple levels of a decision hierarchy to satisfy many conflicting system-specific and stakeholder-specific requirements that define system and stakeholder performances. Given the stakeholder interrelations and conflicting nature of system-specific and stakeholder-specific requirements, system and stakeholder performances are correlated and conflicting.

In the Industry 5.0 era, there is an increased emphasis on the creation and equitable distribution of value among all the stakeholders in …

Offering A Manufacturing Curriculum Online To Rural Schools: The Case Of The Nimm Project, Raymond A. Dixon, Farjahan Shawon

Journal of Research in Technical Careers

This case study examined the extent to which the two implemented manufacturing pathways of the NIMM project successfully facilitated access and engaged high school students from rural regions in two manufacturing curricula. The program consisted of two tracks or career pathways for manufacturing technicians: Mechanical CADD technician and Electro-Mechanical technician. The Mechanical CADD program was delivered online, and the Electro-Mechanical program was delivered online and through a summer skills academy. Findings include, students showed less preference for CTE manufacturing courses in an online asynchronous format, CTE instructors need to be trained to teach online, proper IT infrastructure is needed for …

How Do Parents Influence Female Students' Engineering Trajectory?, Niloufar Bayati, Cameron Denson

Journal of Research in Technical Careers

Using the Parental Socialization Framework, this research provides a detailed analysis of how early STEM exposure, parental confidence in abilities, and gender-neutral upbringing contribute to the development of STEM identities among women. Employing a hermeneutic phenomenological approach, six undergraduate women engineering majors were interviewed in-depth about their parents' influence on their STEM pathways. The findings reveal that parents' high academic expectations, confidence in their daughters' abilities, verbal and non-verbal encouragement, and early STEM opportunities are pivotal in steering female participants toward engineering. The study also underscores the importance of creating a gender-neutral environment that allows girls to explore and develop …

Tracing Wave Induced Flow Field Surrounding Reef Balls, Alexis Scheele

Theses and Dissertations

This study aims to explore the wave-induced flow dynamics around Reef Ball models using dye tracing techniques. Reef Balls are hemispherical artificial reefs with a hollow center and cavities throughout each face, they are designed in this manner to enhance coral reef restoration. Reef Balls rely on wave energy and current motion to facilitate water circulation and nutrient exchange within and surrounding their structure. To understand how wave action influences flow patterns around these artificial reefs, a scaled model experiment was designed to simulate real-world conditions. The experiments were conducted in the wave flume at Florida Institute of Technology’s Surf …

Development Of A Probabilistic Interaction Rule And Failure Pressure Model For Pipelines With A Colony Of Corrosion Defects, Kiswendsida J. Kere

Civil and Environmental Engineering Faculty Research and Publications

The interaction effect originating from a defect colony can pose a higher pipeline failure risk than the case when such possible interaction is not considered. Recognizing the limitations in existing models that can lead to inaccurate pipeline integrity assessment, the goal of this study is to develop a probabilistic interaction rule and predictive burst failure pressure model for pipelines with a colony of corrosion defects. First, a comprehensive database of burst failure pressure for pipes with a colony of corrosion is established that encompasses a wide range of influencing factors (e.g., spacing, defect sizes, and material properties) on the defect …

Exploring Veto Activity: Dnam-1-Cd155 Axis In Overcoming Nk Cell-Mediated Allo-Rejection And Applications For Car-T Cell Therapy, Wei-Hsin Liu

Dissertations and Theses (Open Access)

As Miller et al. defined veto activity, it enables cells to target host cytotoxic T lymphocyte (CTL) precursors specific to veto cells' antigens, selectively eliminating anti- donor T cell clones without inducing rejection. By leveraging this unique immune property, two key research aims were proposed: “Exploration of the Impact of Veto Activity on Natural Killer (NK) Cell-Mediated Allo-rejection” and “Development of Off-the- shelf Chimeric Antigen Receptor (CAR)-T Therapy: Engineering Anti-Viral Veto CD8+ T Cells”. As demonstrated in our previous research, in a murine model with mild conditioning, anti-third-party central memory CD8+ veto T cells (veto Tcm) can prevent T cell- …

Retrofitting Farm Equipment With Airflow Sensors, Jacob Bybee

Undergraduate Honors Capstone Projects

In the Fall of 2024, our farm in Idaho upgraded our equipment from conventional seeding drills to more modern and sophisticated air seeder drills, particularly the John Deere 1900 Commodity Air Cart and John Deere 730 Air Disk Drill. In our case, this equipment was purchased used at an auction and had been a little modified. One modern convenience that this certain 730 Drill did not come with was a blockage monitoring system to alert the operator that a seed distribution tube was no longer distributing seeds. My question the became: Can an affordable, reliable airflow sensor system be designed …

Understanding And Modeling Pooled Rideshare Acceptance: Influential Factors, Preferred User Experiences, And Implications, Rakesh Gangadharaiah

All Dissertations

Ridesharing allows people to share a vehicle with others traveling in the same direction, which can reduce costs and traffic congestion. Pooled rideshare (PR) services, such as UberX Share and Lyft Shared, offer an economical and environmentally friendly alternative by matching passengers traveling similar routes. However, despite these benefits, PR adoption remains low due to concerns about safety, privacy, and convenience. This research explores the factors influencing PR adoption and provides recommendations to improve user acceptance. A nationwide survey of 5,385 participants across the U.S. was conducted to understand why people choose or avoid PR. The study identified five key …

Utilization Of Imidazolium Ionic Liquids For Enhanced Oil Recovery In Harsh Emirati Tight Carbonate Oil Reservoirs, Noran Hussein Mousa

Dissertations

In response to the increasing global demand for energy and the limitations of traditional chemical oil recovery methods, this study explores the potential of imidazolium-based ionic liquids (ILs) as enhanced oil recovery (EOR) agents for Emirati tight oil reservoirs. Four ILs—C10mimCl, C12mimCl, C12mimBF4, and C16mimBr—were evaluated for their effects on the interfacial tension (IFT), wettability, emulsification, and rheological properties under reservoir conditions. Experiments conducted at varying salinities, temperatures (up to 110°C), and IL concentrations (500–3000 ppm) demonstrated that longer alkyl chain ILs, particularly C16mimBr, effectively reduced IFT by >99% and improved wettability by lowering contact angles down to 15.37°. Statistical …

The Food Truck: A Multi-Product Newsvendor With Trans-Shipment Cost, Samuel Ajibola

Electronic Theses and Dissertations

The Newsvendor Problem is a key model in supply chain management that focuses on determining the optimal order quantity to minimize costs under uncertain demand. This thesis introduces the Food Truck Problem, an extension of the Newsvendor model that incorporates nonlinear transshipment costs for inventory transportation. In this context, a Food Truck must determine the optimal stock levels for multiple products while minimizing costs related to stock shortages, excess inventory, and transportation. Unlike traditional Newsvendor models, our approach explicitly considers a quadratic transshipment cost, which necessitates the use of Lagrangian duality and Karush-Kuhn-Tucker (KKT) conditions for analysis. Moreover, we apply …

Training Lander For Rover Arm Testing, James Peck

Undergraduate Honors Capstone Projects

The purpose of this honors capstone project is to design and fabricate a training lander to support the Utah State University (USU) rover team in preparation for the University Rover Challenge (URC). The URC is an international collegiate competition featuring four missions, one of which—the Equipment Servicing Mission—demands a high level of robotic arm functionality and operator skill. Historically, USU's rover teams have struggled to qualify for the URC finals, in part due to limited hands-on training opportunities with the robotic arm.

To address this gap, the training lander replicates the tasks found in the URC Equipment Servicing Mission, such …

Data Science For Engineers, Heidi Moulton

Undergraduate Honors Capstone Projects

Undergraduate research is a core pillar of Utah State University’s College of Engineering. Many students become involved with research during their Junior and Senior years and begin to generate various forms of data. Most students, however, have received little formal education on how to process data, and there are currently no readily available resources within the College of Engineering. As a Mechanical Engineering and Data Science double major, I found the data processing techniques I learned in my Data Science courses invaluable as an undergraduate researcher, and now as a Mechanical Engineer at Apogee Instruments, I frequently draw upon these …

Evaluating The Self-Healing Capabilities Of Engineered Cementitious Composite Mixtures, Emma W. Baggett

Undergraduate Honors Capstone Projects

Engineered cementitious composites (ECC) is a class of ductile fiber-reinforced concrete designed to exhibit strain-hardening and multiple fine microcracking, instead of large brittle cracks, under tensile loading. The presence of high volume of non-hydrated cement particles in ECC have demonstrated self-healing potential of cracks in ECC. This study evaluates the influence of two ECC additives, limestone powder and crumb rubber, on the self-healing performance of ECC. Three ECC mixture designs were developed: a control mixture, a limestone powder-modified mixture and a crumb rubber modified mixture. Self-healing was monitored over a period of 90 days under alternating wet and dry conditions …

Fairness And Robustness In Decentralized Federated Learning, Kaichuang Zhang

Theses and Dissertations

Federated Learning (FL) has emerged as a privacy-preserving paradigm that allows multiple clients to collaboratively train a machine learning model without sharing raw data. However, traditional FL relies on a central server for model aggregation, which introduces a single point of failure and makes the system vulnerable to server-side attacks or breakdowns. To address these limitations, Decentralized Federated Learning (DFL) has been proposed, eliminating the need for a central server and enhancing system resilience. Despite these advantages, DFL faces critical challenges related to fairness and robustness, especially under non-i.i.d. data distributions and adversarial conditions. In this thesis, we propose a …

Tribological Characterization Of Laser Microtextured Ti-6al-4v Eli Alloy For Biomedical Applications, Nicholas Ricardo Perez

Theses and Dissertations

Titanium alloys have been gaining popularity in multiple fields due to their impressive physical properties, but struggle with poor tribological performance. This thesis aims to mitigate the poor tribological performance of titanium alloys through a laser microtexturing process. Ti-6Al-4V ELI (Extra Low Interstitial) alloy disks were evaluated against ultrahigh molecular weight polyethylene (UHMWPE) and polyether ether ketone (PEEK) pins. Four texturing patterns were created by changing the texture area fraction from 5 to 20% that were evaluated against untextured control samples. The tribological properties of the laser textured Ti-6Al-4V ELI disks were determined using a pin-on-disk tribometer under lubricated sliding …

Spin Coater Design With Pid Algorithm Using Polynomial Regression Approach And Bias Tuning For Tio2 Deposition Process, Geo Surya Andika, Nofrijon Sofyan, Donanta Dhaneswara, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

The thin-film deposition technique using spin coating offers a cost-effective alternative to Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD). The spin-coating process requires precise control of the motor drive system to ensure that the rotational speed, measured in rotations per minute (RPM), aligns with the set point and remains stable. This study presents the design and development of a spin coater prototype to achieve uniform thin-film deposition. The control method employed utilizes a Proportional-Integral-Derivative (PID) algorithm, incorporating a polynomial approach with bias tuning. The PID control was chosen to achieve stable operation in a non-linear system. The performance …

Nonlinear Control System Design And Hardware Testing Of An Overactuated Multicopter, William A. Wearren

Graduate Theses and Dissertations (2019 - present)

For the concept of Urban Air Mobility to be implemented into everyday life, the safety of passengers, bystanders, and surrounding infrastructure needs to be held paramount [1]. In previous work done at the University of South Alabama Facility for Aerospace Systems and Technology (FAST) lab, a reconfigurable control law was derived and tested on a scratch built multicopter [2]. The goal of the control law was to stabilize an X8 model multicopter in the event of motor outages [2]. The control law was tested on a simulated model and flight tested on a small-scale X8 multicopter to verify the effectiveness …

Autonomous Control Of A Hybrid Unmanned Aerial Towed System On A Moving Platform, Zachary M. Miller

Graduate Theses and Dissertations (2019 - present)

With tethered rotor drones being more popular for aerial surveillance, moving platforms for tethered drones are being researched. However, these systems require constant power to the rotor drones for stabilization. With this difficulty in power consumption, a hybrid drone solution is presented. The hybrid drone is similar to an airplane, with quadcopter motors attached for stabilization and thrust when not moving.

The controller for the hybrid drone was tested and verified in simulation. The simulation of the system was built in Fortran and consists of a driver, a tether, and a hybrid drone. The driver was modeled after a generic …

Comparison And Evaluation Of Overlay And Leveling Binder In Traffic Circle Construction, Pratik Neupane

Graduate Theses and Dissertations (2019 - present)

Traffic circles play a vital role in managing traffic flow and ensuring safety, yet their unique traffic conditions make them prone to early cracking and deformation. This study evaluated the performance of overlay and leveling binder asphalt mixtures for a reconstructed traffic circle at the University of South Alabama, using plant-mixed laboratory-compacted (PMLC) specimens. Volumetric analyses were performed to determine maximum specific gravity (Gmm), bulk specific gravity (Gmb), and air voids content. Laboratory tests were conducted on both the overlay and leveling binder layers using indirect tensile cracking test (IDEAL-CT) and indirect tensile rutting test (IDEAL-RT) to assess cracking tolerance …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

An Msbe–Driven Advanced Air Mobility Post–Disaster Response System, Olabode A. Olanipekun

Graduate Theses and Dissertations (2019 - present)

In this work, an overarching conceptual design model towards the realization of a proposed Advanced Air Mobility Post–Disaster Response System (AAMPDR system) was explored through the focal lenses of systems thinking (ST), socio–technical systems (STS) and model–based systems engineering (MBSE) paradigms. Initially aimed at providing intervention for casualties and aerial support to emergency rescue workers on the ground in the event of a hurricane disaster around the Gulf shore of the Mobile bay area, Mobile city, AL., the scope of this research subsequently expanded to include a global outlook. Thereafter, culminating in the development of a generalized AAMPDR system model …

Evaluation Of Novel Jointless Engineered Cementitious Composite Ultrathin Whitetopping (Ecc-Utw) Overlay, Hassan Noorvand, Marwa Hassan, Tyson Rupnow, Ricardo Hungria

Publications

The present work corresponds to the development and the application of a cost-effective Engineered Cementitious Composites (ECC) mix design with the name M3-1.5%. Once the material was developed it was applied in the construction of a novel engineered cementitious composites ultrathin whitetopping (ECC-UTW) overlay. The overlay was constructed in May 2019 at the Pavement Research Facility (PRF) in Port Allen, Louisiana. The project was built on top of a distressed asphalt pavement corresponding to a previous project. During the construction, samples were gathered and subjected to testing after 28 days through means of compressive, uniaxial tension and flexural strength tests. …

Critical Analysis Of Coursework And Internship Experience In Relation To Biological Engineering At The University Of Arkansas, Samantha Wheat

Biological and Agricultural Engineering Undergraduate Honors Theses

My internship allowed me to gain important experience about a possible future career path with a biological engineering degree. Not only did this experience apply knowledge learned in the classroom from classes taken, I was also able to use my critical thinking skills gained from biological engineering coursework and teaching style to learn new skills and efficiently complete tasks given to me. This internship allowed me to try out a possible career path that interested me, and through my internship experience I was able to learn more about what kind of career path I was interested in after graduation. Additionally, …

Effects Of Sensor Separation On Flux Calculations In The Eddy Covariance Method., Maria D. Vergara Murillo

Biological and Agricultural Engineering Undergraduate Honors Theses

Rice production contributes approximately 8% of global anthropogenic methane emissions. Methane (CH₄) is a powerful greenhouse gas with a global warming potential 28 times greater than carbon dioxide (CO₂) which makes it important to monitor for understanding and mitigating its contribution to climate change. The Eddy Covariance (EC) method is used to monitor greenhouse gas emissions such as CO₂, CH₄, etc. As part of the EC method, the instruments on the EC towers are used to record the gas concentrations in the atmosphere; these concentrations are then run in the EddyPro software …

Propasafe: A Bert-Based Offline Tool For Propaganda Detection, Vivek Sharma, Mohammad Mahdi Shokri, Shweta Jain, Sarah Ita Levitan, Elena Filatova

Publications and Research

In an era marked by the rapid consumption of digital news, the proliferation of propaganda poses significant threats to democratic values and informed decision-making. We propose a novel framework that prioritizes user privacy while assisting in the automatic detection of propaganda in news articles, allowing users to sift through the rhetoric to read the relevant objective news. As a demonstration of this framework, we present Propasafe, a BERT-based browser extension designed to alert users to propagandist tones in news articles. By highlighting instances of propaganda-like language in real-time, Propasafe empowers users to critically engage with news content, promoting objective understanding …

User Acceptance Of Shared Autonomous Vehicles, Haotian Su

All Dissertations

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why …

Understanding The Role Of Ligamentous Constraint In Trapeziometacarpal Pathomechanics, Lizzie Walker

All Dissertations

The trapeziometacarpal (TMC) joint is the most common site for osteoarthritis (OA) in the upper limb. This joint is characterized by its wide range of motion and limited bony stability, making it susceptible to OA. The TMC joint relies mostly on ligaments and muscles for its static and dynamic stability, respectively. While importance of both volar and dorsal capsular TMC stabilizers has been demonstrated, the role of TMC ligamentous tissues in the development of thumb basal joint OA remains unclear.

The goal of this work was to identify morphometric and mechanical changes in key TMC ligament stabilizers, including the volar …

Development Of Rolipram Loaded Pgp Nanoparticles For Spinal Cord Injury Repair, Zhen Liao

All Dissertations

Spinal cord injury (SCI) leads to devastating neurological deficits due to primary mechanical damage and secondary injury mechanisms, including inflammation, oxidative stress, excitotoxicity, and inhibitory scarring, which collectively impede neural regeneration. One key aspect of SCI pathology is a significant reduction in cyclic adenosine monophosphate (cAMP) levels, primarily due to increased phosphodiesterase (PDE 4) activity. As a ubiquitous second messenger, cAMP regulates key signaling pathways, including protein kinase A (PKA) / cAMP response element-binding protein (CREB) and exchange protein activated by cAMP 2 (EPAC2). Therefore, restoring/increasing cAMP level is one of the major therapeutic strategies to reduce neurotrauma and restore …

The Effects Of Cigarette Smoke Extract On Osteoarthritis In A Primary Joint Tissue Explant Model, Emily Sawvell

All Dissertations

Osteoarthritis (OA) is the most common degenerative joint disease in the world with an economic burden of nearly $140 billion annually. Factors identified to increase the risk of developing OA include age, obesity, sex, race, genetics, and previous joint injury. However, one risk factor that has been scarcely studied in OA etiology is cigarette smoking. While some studies have reported smoking to protect against OA, increasing evidence suggests that cigarette smoking results in more severe and painful OA, increases the rate of developing OA, and reduces the efficacy of pain medications and arthritis-targeting therapies. Despite this, the impact of cigarette …

The Evolution Of Nanoparticles In Nanoparticle Doped Optical Fibers, Mary Cahoon

All Dissertations

Optical fiber and fiber laser technologies based on silica glass are critical to many technologies today. One method to improve the optical performance of laser fibers is engineer the local environment around the active elements in the glass. To that end, this Dissertation focused on the fabrication and characterization of fibers made with nanoparticles incorporated into the glass to control the local composition. First, the nanoparticle composition and structure was analyzed as it evolved from from the initially-synthesized form to incorporation into the dense aluminum-silicate glass. The aluminum oxide in the glass was found to be important not only to …