Engineering Commons^™

Densification Of W-Ni-Fe Powders Using Laser Sintering, Xuan Wang, Matthew Wraith, Stephen Burke, Howard Rathbun, Kyle Devlugt

Industrial and Manufacturing Engineering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. The microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser …

Multi-Axial Failure Of High-Performance Fiber During Transverse Impact, Matthew C. Hudspeth

Open Access Dissertations

The effect of projectile nose geometry on ensuing wave development in high-performance yarns is explored during single yarn transverse impact. Special attention has been placed on visualizing the immediate region around the projectile-yarn contact site for 0.30-cal round, 0.30-cal fragment simulation projectiles (FSP), and razor blades using high-speed imaging. Kevlar® KM2, Dyneema®SK76 and AuTx have been impacted at velocities ranging from ∼100 m/s to ∼1200 m/s depending on projectile nose shape, with an emphasis set on determining the critical velocity wherein below said velocity significant development of wave propagation occurs and above said velocity the yarn fails immediately upon impact. …

Preliminary Design Tools In Turbomachinery: Non-Uniformly Spaced Blade Rows, Multistage Interaction, Unsteady Radial Waves, And Propeller Horizontal-Axis Turbine Optimization, Yujun Leng

Open Access Dissertations

Turbomachinery flow fields are inherently unsteady and complex which makes the related CFD analyses computationally intensive. Physically based preliminary design tools are desirable for parametric studies early in the design stage, and to provide deep physical insight and a good starting point for the later CFD analyses. Four analytical/semi-analytical models are developed in this study: 1) a generalized flat plate cascade model for investigating the unsteady aerodynamics of a blade row with non-uniformly spaced blades; 2) a multistage interaction model for investigating rotor-stator interactions; 3) an analytical solution for quantifying the impeller wake convection and pressure wave propagating between a …

2016 Research Week, Linda Gardiner, David Owerbach

Office of Research Institutional Research and Scholarship

RESEARCH WEEK 2016 TABLE OF CONTENTS

ADMINISTRATION RESEARCH COMMITTEES ACTIVITY SCHEDULE

LETTERS OF ENDORSEMENT

GENERAL SESSION

FACULTY, STAFF, AND STUDENT POSTER PRESENTATIONS

FACULTY AND STUDENT ORAL PRESENTATIONS

Santa Clara Magazine, Volume 57 Number 2, Spring 2016, Santa Clara University

Santa Clara Magazine

20 - LET THERE BE LIGHT Frank Cepollina ’59—the NASA maverick who saved Hubble. By Robert Zimmerman.

28 - LIKE NO PLACE ON EARTH Talking with John A. Sobrato ’60 about building Silicon Valley—literally. By Michael S. Malone ’75, MBA ’77.

32 - DISRUPTION IN THE HOUSE Allison Kopf ’11 just won one of the premier startup competitions on the planet. She’s making the Google Analytics of greenhouses. By Ed Cohen.

34 - AN AMERICAN STORY A few words from the remarkable life of Francisco Jiménez ’66. By Steven Boyd Saum.

38 - DR. JEROME HE was a man of …

Grounding Robot Motion In Natural Language And Visual Perception, Scott Alan Bronikowski

Open Access Dissertations

The current state of the art in military and first responder ground robots involves heavy physical and cognitive burdens on the human operator while taking little to no advantage of the potential autonomy of robotic technology. The robots currently in use are rugged remote-controlled vehicles. Their interaction modalities, usually utilizing a game controller connected to a computer, require a dedicated operator who has limited capacity for other tasks.

I present research which aims to ease these burdens by incorporating multiple modes of robotic sensing into a system which allows humans to interact with robots through a natural-language interface. I conduct …

Development And Evaluation Of A Watershed-Scale Hybrid Hydrologic Model, Younghyun Cho

Open Access Dissertations

A watershed-scale hybrid hydrologic model (Distributed-Clark), which is a lumped conceptual and distributed feature model, was developed to predict spatially distributed short- and long-term rainfall runoff generation and routing using relatively simple methodologies and state-of-the-art spatial data in a GIS environment. In Distributed-Clark, spatially distributed excess rainfall estimated with the SCS curve number method and a GIS-based set of separated unit hydrographs (spatially distributed unit hydrograph) are utilized to calculate a direct runoff flow hydrograph, and time-varied SCS CN values and conditional unit hydrograph approach for different runoff depth-based flow convolution are also used to compute long-term rainfall-runoff flow hydrographs. …

Inspire E-News 04 2016, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Steel bridge, concrete canoe teams head to regional competition
• Engineers invent 3D hybrid metal printer
• Area students compete in 2016 Science Olympiad Area tournament at WMU

In The Face Of Anticipation: Decision Making Under Visible Uncertainty As Present In The Safest-With-Sight Problem, Bryan A. Knowles

Masters Theses & Specialist Projects

Pathfinding, as a process of selecting a fixed route, has long been studied in

Computer Science and Mathematics. Decision making, as a similar, but intrinsically different, process of determining a control policy, is much less studied. Here, I propose a problem that appears to be of the first class, which would suggest that it is easily solvable with a modern machine, but that would be too easy, it turns out. By allowing a pathfinding to anticipate and respond to information, without setting restrictions

on the \structure" of this anticipation, selecting the \best step" appears to be an intractable problem.

After …

A Study On The Sustainable Machining Of Titanium Alloy, Abdulhameed Alaa Dawood

Masters Theses & Specialist Projects

Titanium and its alloy (Ti-6Al-4V) are widely used in aerospace industries because of their light weight, high specific strength, and corrosion resistance. This study conducted a comparative experimental analysis of the machinability of Ti-6Al-4V for conventional flood coolant machining and sustainable dry machining. The effect of cutting speed, feed rate, and depth of cut on machining performance has been evaluated for both conditions. The machining time and surface roughness were found to be lower in dry machining compared to flood coolant machining. The tool wear was found to be unpredictable, and no significant difference was observed for dry and coolant …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Pedestrian Detection Using Basic Polyline: A Geometric Framework For Pedestrian Detection, Liang Gongbo

Masters Theses & Specialist Projects

Pedestrian detection has been an active research area for computer vision in recently years. It has many applications that could improve our lives, such as video surveillance security, auto-driving assistance systems, etc. The approaches of pedestrian detection could be roughly categorized into two categories, shape-based approaches and appearance-based approaches. In the literature, most of approaches are appearance-based. Shape-based approaches are usually integrated with an appearance-based approach to speed up a detection process.

In this thesis, I propose a shape-based pedestrian detection framework using the geometric features of human to detect pedestrians. This framework includes three main steps. Give a static …

Breakdown Voltage Performances Of Aluminum And Copper Conductor Wire Under Compression Stresses, Richard Donald Suchanek Iii

Masters Theses & Specialist Projects

In the global, competitive market of energy transformation, increased operational expenses and depletion of raw materials have resulted in companies pursuing alternate materials to reduce consumer costs. In electrical applications, energy is transformed using materials with high electrical conductive properties. The conductive material used to transmit a signal is called conductor wire and is comprised of any material that has the ability to move charged particles from one point to another without propagation or delay. The conductor wire in many applications is encapsulated in epoxy resin called enamel. The enamel is the insulation system that provides necessary dielectric clearances to …

Visible-Light-Responsible Co-Catalysts Enhanced By Graphene For Solar Energy Harvesting, Chen Ying

Masters Theses & Specialist Projects

This study focuses on the visible light response of hetero-structures of TiO2-graphene- MoS2 for solar energy harvestings. The commercial P25 TiO2 nano-particles, and selfprepared layered reduced graphene oxides (RG) and MoS2 were assembled for the targeted hetero-structure materials as visible-light responsible solar harvesting cocatalysts. The hydrothermal method was applied for nano-material synthesis, the reduction of graphene oxides, and bonding formation. Multiple characterization methods (SEM-TEM, XRD, XPS, UV-VIS, PL, FT-IR, TGA) have been applied to understand the electron-hole pair separation and recombination, and performance tuning in their visible-light photo-catalysis rhodamine B (Rh.B) degradations process

Compared to TiO2, an obvious red shift …

58th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 58th Conference on Senior Engineering Design Projects. The conference was held from 8:00 a.m. to 4:00 p.m.,Tuesday, April 19, 2016 at the College of Engineering and Applied Sciences on the Parkview Campus of Western Michigan University. The College of Engineering and Applied Sciences sponsored the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Optimization-Based Interactive Segmentation Interface For Multiregion Problems., John S H Baxter, Martin Rajchl, Terry M Peters, Elvis C S Chen

Robarts Imaging Publications

Interactive segmentation is becoming of increasing interest to the medical imaging community in that it combines the positive aspects of both manual and automated segmentation. However, general-purpose tools have been lacking in terms of segmenting multiple regions simultaneously with a high degree of coupling between groups of labels. Hierarchical max-flow segmentation has taken advantage of this coupling for individual applications, but until recently, these algorithms were constrained to a particular hierarchy and could not be considered general-purpose. In a generalized form, the hierarchy for any given segmentation problem is specified in run-time, allowing different hierarchies to be quickly explored. We …

Engineering News, Spring 2016, School Of Engineering

Engineering News

No abstract provided.

Detecting And Screening Of The Prostate Cancer By Using An Optical Nanoporous Thin-Film Sensor, Salah Eldeen Mofleh Alzghoul

Doctoral Dissertations

Prostate cancer (PC) affects elderly men more than young men. The currently used cancer biomarker, prostate-specific antigen (PSA), highly overestimates PC population. Men with high PSA levels often have to go through unnecessary, but physically painful, and expensive prosesses, such as prostate biopsies. Finding a prostate cancer marker that is produced selectively by cancer, but not by normal prostate cells will increase the reliability of PC test. In 2006, our collaborator (Dr. Girish Shah) discovered a novel protein, referred as neuroendocrine marker (NEM), secreted only by malignant prostate cells and released in blood circulation.

To examine whether the combined NEM-PSA …

Development Of A Wireless Mobile Computing Platform For Fall Risk Prediction, Akm Jahangir Alam Majumder

Dissertations (1934 -)

Falls are a major health risk with which the elderly and disabled must contend. Scientific research on smartphone-based gait detection systems using the Internet of Things (IoT) has recently become an important component in monitoring injuries due to these falls. Analysis of human gait for detecting falls is the subject of many research projects. Progress in these systems, the capabilities of smartphones, and the IoT are enabling the advancement of sophisticated mobile computing applications that detect falls after they have occurred. This detection has been the focus of most fall-related research; however, ensuring preventive measures that predict a fall is …

Micro- And Nanoparticulates For Dna Vaccine Delivery, Eric Farris, Deborah M. Brown, Amanda Ramer-Tait, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

DNA vaccination has emerged as a promising alternative to traditional protein-based vaccines for the induction of protective immune responses. DNA vaccines offer several advantages over traditional vaccines, including increased stability, rapid and inexpensive production, and flexibility to produce vaccines for a wide variety of infectious diseases. However, the immunogenicity of DNA vaccines delivered as naked plasmid DNA is often weak due to degradation of the DNA by nucleases and inefficient delivery to immune cells. Therefore, biomaterial-based delivery systems based on micro- and nanoparticles that encapsulate plasmid DNA represent the most promising strategy for DNA vaccine delivery. Microparticulate delivery systems allow …

Hyaluronic Acid-Conjugated Liposome Nanoparticles For Targeted Delivery To Cd44 Overexpressing Glioblastoma Cells, Stephen L. Hayward, Christina L. Wilson, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

Glioblastoma Multiforme (GBM) is a highly prevalent and deadly brain malignancy characterized by poor prognosis and restricted disease management potential. Despite the success of nanocarrier systems to improve drug/gene therapy for cancer, active targeting specificity remains a major hurdle for GBM. Additionally, since the brain is a multi-cell type organ, there is a critical need to develop an approach to distinguish between GBM cells and healthy brain cells for safe and successful treatment. In this report, we have incorporated hyaluronic acid (HA) as an active targeting ligand for GBM. To do so, we employed HA conjugated liposomes (HALNPs) to study …

Asphalt Pavement Preservation Using Rejuvenating Fog Seals, Ammanuiel A. Kebede

Open Access Theses

Fog seal is a type of treatment that uses a diluted asphalt emulsion to seal and protect an existing asphalt surface from a variety of distresses. Fog seal is sprayed on top of an asphalt pavement surface to improve and protect it from further cracking and raveling. Rejuvenator is also a type of treatment that penetrates into the asphalt pavement and restores its original viscoelastic properties. Similarly, like fog seal, rejuvenators can be sprayed on top of an asphalt pavement surface. The use of rejuvenators has grown rapidly in the past decade. However, little is known about the actual effectiveness …

Immobilization Of Cellulase For Large Scale Reactors To Reduce Cellulosic Ethanol Cost, Dezhi Zhang

Doctoral Dissertations

Cellulosic ethanol is an alternative renewable energy source. Cellulase used in the production of cellulosic ethanol is very expensive. The difficulty in separating cellulase from the cellulose solution after the hydrolysis process limits the reusability of the cellulase, which highly precludes the scales of this application because of the high cost of the enzyme. Immobilization of cellulase provides a promising approach to allow the enzyme to be recycled, thus reducing the production cost. This research focused on immobilizing cellulase for reuse to reduce the cellulosic ethanol cost.

Four immobilization techniques were explored for the immobilization of cellulase on four different …

Enhanced Bioactive Scaffolds For Bone Tissue Regeneration, Sonali Karnik

Doctoral Dissertations

Bone injuries are commonly termed as fractures and they vary in their severity and causes. If the fracture is severe and there is loss of bone, implant surgery is prescribed. The response to the implant depends on the patient's physiology and implant material. Sometimes, the compromised physiology and undesired implant reactions lead to post-surgical complications. [4, 5, 20, 28] Efforts have been directed towards the development of efficient implant materials to tackle the problem of post-surgical implant failure. [ 15, 19, 24, 28, 32]

The field of tissue engineering and regenerative medicine involves the use of cells to form a …

Clay Nanotube Composites For Antibacterial Nanostructured Coatings, Christen J. Boyer

Doctoral Dissertations

A surging demand for the development of new antimicrobial nanomaterials exists due to the frequency of medical device-associated infections and the transfer of pathogens from highly touched objects. Naturally occurring halloysite clay nanotubes (HNTs) have shown to be ideal particles for polymer reinforcement, time-release drug delivery, nano-reactor synthesis, and as substrate material for nanostructured coatings.

This research demonstrates the feasibility of a novel method for coating HNTs with metals for antibacterial applications. The first ever ability to coat HNTs through electrolysis was developed for customizable and multi-functional antibacterial nanoparticle platforms. HNTs were investigated as substrate for the deposition of copper …

Ibeacon Based Proximity And Indoor Localization System, Faheem Faheem

Open Access Theses

User location can be leveraged to provide a wide range of services in a variety of indoor locations including retails stores, hospitals, airports, museums and libraries etc. The widescale proliferation of user devices such as smart phones and the interconnectivity among different entities, powered by Internet of Things (IoT), makes user device-based localization a viable approach to provide Location Based Services (LBS). Location based services can be broadly classified into 1) Proximity based services that provides services based on a rough estimate of users distance to any entity, and 2) Indoor localization that locates a user's exact location in the …

Planning For Climate Change: The Need For Mechanistic Systems-Based Approaches To Study Climate Change Impacts On Diarrheal Diseases, Jonathan E. Mellor, Karen Levy, Julie Zimmerman, Mark Elliott, Jamie Bartram, Elizabeth Carlton, Thomas Clasen, Rebecca Dilingham, Joseph Eisenberg, Richard Guerrant, Daniele Lantagne, James Mihelcic, Kara Nelson

Civil and Environmental Engineering Faculty Publications

Increased precipitation and temperature variability as well as extreme events related to climate change are predicted to affect the availability and quality of water globally. Already heavily burdened with diarrheal diseases due to poor access to water, sanitation and hygiene facilities, communities throughout the developing world lack the adaptive capacity to sufficiently respond to the additional adversity caused by climate change. Studies suggest that diarrhea rates are positively correlated with increased temperature, and show a complex relationship with precipitation. Although climate change will likely increase rates of diarrheal diseases on average, there is a poor mechanistic understanding of the underlying …

Cosmic Ray Muons For Spent Nuclear Fuel Monitoring, Stylianos Chatzidakis

Open Access Dissertations

There is a steady increase in the volume of spent nuclear fuel stored on-site (at reactor) as currently there is no permanent disposal option. No alternative disposal path is available and storage of spent nuclear fuel in dry storage containers is anticipated for the near future. In this dissertation, a capability to monitor spent nuclear fuel stored within dry casks using cosmic ray muons is developed. The motivation stems from the need to investigate whether the stored content agrees with facility declarations to allow proliferation detection and international treaty verification. Cosmic ray muons are charged particles generated naturally in the …

Learning From Minimally Labeled Data With Accelerated Convolutional Neural Networks, Aysegul Dundar

Open Access Dissertations

The main objective of an Artificial Vision Algorithm is to design a mapping function that takes an image as an input and correctly classifies it into one of the user-determined categories. There are several important properties to be satisfied by the mapping function for visual understanding. First, the function should produce good representations of the visual world, which will be able to recognize images independently of pose, scale and illumination. Furthermore, the designed artificial vision system has to learn these representations by itself. Recent studies on Convolutional Neural Networks (ConvNets) produced promising advancements in visual understanding. These networks attain significant …

Effect Of Bioenergy Crops And Fast Growing Trees On Hydrology And Water Quality In The Little Vermilion River Watershed, Tian Guo

Open Access Dissertations

Energy security and sustainability require a suite of biomass crops, including woody species. Short rotation woody crops (SRWCs) such as Populus have great potential as biofuel feedstocks. Quantifying biomass yields of bioenergy crop and hydrologic and water quality responses to growth is important should it be widely planted in the Midwestern U.S. Subsurface tile drainage systems enable the Midwest area to become highly productive agricultural lands, but also create environmental problems like nitrate-N contamination of the water it drains. The Soil and Water Assessment Tool (SWAT) has been used to model watersheds with tile drainage, but the new tile drainage …