Engineering Commons^™

Experimental Assessment Of Mouse Sociability Using An Automated Image Processing Approach, Frency Varghese, Jessica A. Burket, Andrew D. Benson, Stephen I. Deutsch, Christian W. Zemlin

Electrical & Computer Engineering Faculty Publications

Mouse is the preferred model organism for testing drugs designed to increase sociability. We present a method to quantify mouse sociability in which the test mouse is placed in a standardized apparatus and relevant behaviors are assessed in three different sessions (called session I, II, and III). The apparatus has three compartments (see Figure 1), the left and right compartments contain an inverted cup which can house a mouse (called “stimulus mouse”). In session I, the test mouse is placed in the cage and its mobility is characterized by the number of transitions made between compartments. In session II, a …

Handcrafted Electrocorticography Electrodes For A Rodent Neural Activity, Nishat Tasnim

Theses and Dissertations

Electrocorticography (ECoG) is a minimally invasive neural recording method that has been extensively used for neuroscience applications. Although many neural recording methods exist, ECoG provides a combination of stability, high spatial and temporal resolution with chronic and mobile capabilities. This paper presents an animal study using a low cost and simple handcrafted ECoG electrode that is made of commercially accessible materials. The study is performed on a Lewis rat implanted with a handcrafted 32-channel non-penetrative ECoG electrode covering an area of 3 x 3 mm 2 on the cortical surface. The ECoG electrodes were placed on the motor and somatosensory …

Optimizing Cloud-Service Performance: Efficient Resource Provisioning Via Optimal Workload Allocation, Zhuoyao Wang

Electrical and Computer Engineering ETDs

Cloud computing is being widely accepted and utilized in the business world. From the perspective of businesses utilizing the cloud, it is critical to meet their customers' requirements by achieving service-level-objectives. Hence, the ability to accurately characterize and optimize cloud-service performance is of great importance. In this dissertation, a stochastic multi-tenant framework is proposed to model the service of customer requests in a cloud infrastructure composed of heterogeneous virtual machines (VMs). The proposed framework addresses the critical concepts and characteristics in the cloud, including virtualization, multi-tenancy, heterogeneity of VMs, VM isolation for the purpose of security and/or performance guarantee and …

Exploiting Adaptive Techniques To Improve Processor Energy Efficiency, Hu Chen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As technology advances, the size of transistor — the basic building block of microprocessors, continues shrinking. The downscaled transistor will make its manufacture process become less controllable, and its operation less predictable. Moreover, smaller transistor size will lead to higher volume of transistors on a single chip, thus increases the chip power consumption. This dissertation proposes various techniques to efficiently tolerate the uncertainties in microprocessors. Also, it proposes an innovative design paradigm to build energy-efficient processor under ultra-low supply-voltage. Evaluated with rigorous methodology, the proposed approaches achieve significant improvement in processor energy efficiency, compared to other state-of-art techniques.

Path Following By A Quadrotor Using Virtual Target Pursuit Guidance, Abhishek Manjunath

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Missile guidance laws have been solely developed to follow and intercept a target thereby destroying or damaging it. In this research, the primary objective is to modify and adopt a missile guidance law to be used on a quadrotor to follow a virtual target. The target is termed 'virtual' as it only exists mathematically in the form of equations. The goal is to have the quadrotor successfully following the predefined path (described by the target) while maintaining a fixed distance from the virtual target. To ensure viability and assess performance, a detailed comparison with another path following law is made.

Quadrotor Uav Path Following Using Trajectory Shaping, Parwinder Singh Mehrok

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The propose of this research is to develop a path following control law known as Trajectory Shaping. The approach is to develop a three- dimensional (3D) version of it from an existing two-dimensional (2D) model. Apart from research on this 3D control law, a multirotor unmanned aerial vehicle (UAV) platform, having four rotors and known as quadrotor is designed from the ground up for validating the concept of path following. Several pre-defined paths like the circle and figure-eight trajectories are used to apply the newly developed version of this control law. The existing 2D concept of Trajectory Shaping guidance …

Laboratory Modeling Of Piping Initiation Behavior Through Constricted Outlet, Ibrahim Ahmed Abdelmotelb Ibrahim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Backward erosion piping is a type of internal erosion. It occurs beneath water structures as a result of seepage force. It needs two conditions to take place; 1) sufficient hydraulic head to drive the seepage force, and 2) cohesive layer overlies the sand layer and this will lead to concentration of flow. Many researches were done in the past in an attempt to predict the critical gradient. But it was just taking into account the buoyant unit weight which found in recent research that piping can occur at much lower values than was predicted. And other researches were too conservative …

Chromium Oxidation By Disinfectants And Oxidants Used In Drinking Water Treatment, Nathan D. Rogers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This project investigated the behavior of hexavalent chromium (Cr(VI), a potential carcinogen) in drinking water. While Cr(VI) can exist naturally, it can also be oxidized from Cr(III), a known trace nutrient. Recently, the State of California implemented a water regulation specifically for Cr(VI) at 10 parts per billion (ppb). This project completed a comprehensive evaluation of chromium behavior when in contact with common drinking water treatment chemicals including chlorine, monochloramine, chlorine dioxide, potassium permanganate, and ozone.

The results of these oxidation experiments are highly applicable to water treatment facilities. If a treatment plant is using monochloramine, there is no indication …

Ground Vehicle Platooning Control And Sensing In An Adversarial Environment, Samuel A. Mitchell

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In the past few years, automated cars have ceased to be part of science fiction, and have instead become a technology that has been implemented, with partially automated systems currently available to customers.

One benefit of automated vehicle technology is the consistent driving patterns due to automation, instead of the inconsistency of distractible humans. Passengers of automated vehicles will be exposed to much less danger than the passengers of human-driven vehicles.

These statements will only be true as automated vehicle systems are scrutinized by experts to find flaws in the system. Security enthusiasts have already hijacked control of an automated …

Optimizing Sustainable Integrated Use Of Groundwater, Surface Water And Reclaimed Water For The Competing Demands Of Agricultural Net Return And Urban Population, Silvia Anastasia Landa

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The world population is growing rapidly. In developing countries, the growing population is mostly in urban areas. A bigger population requires more food, and more food requires more water. The water needed for food and people comes from the same sources: surface water (rivers, lakes, etc.) and groundwater (aquifers). Thus, there is a competing water demand between people and agriculture in urban areas.

In this research, we use computer software to make a model of the hydrologic system that focuses on surface water and groundwater. To make the model, we use data from real aquifers and streams in order to …

Transparent Solar Panel Antenna Array, Taha Shahvirdi Dizaj Yekan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A CubeSat is a very small satellite that has been achieving growing interests in space exploration. The base unit of CubeSats 1U, which is a cube with 10 cm on each side. In applications, CubeSats can be deployed as just 1U, or multiple unites can be stacked together to form a larger CubeSat for extended functionality. Due to their small sizes, it is challenging to fit antennas onto CubeSats because the antenna always fights for surface real estate with solar cells. The challenge is further aggravated when an antenna is required to have high gain such as more than 20 …

The Effects Of Upstream Straight Pipe Length On Magnetic Flow Meter Accuracy, Bradley C. Clawson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In closed conduit water systems, being able to accurately measure flow is absolutely essential. For many meter designs, including electromagnetic induction meters (also known as magnetic flow meters), the greatest accuracy is achieved when the device is calibrated correctly. Optimal meter accuracy often depends on the flow conditions associated with the upstream geometry in the pipe system. Manufacturers typically give standards for the length of straight pipe required upstream of the meter. These standards vary, however, and do not address every possible configuration that may be installed upstream of the straight pipe requirement.

An investigation on the effects of the …

Physically Based Modeling Of The Impacts Of Climate Change On Streamflow Regime, Nazmus Shams Sazib

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Understanding the implications of climate change on streamflow regime is complex as changes in climate vary over space and time. However, a better understanding of the impact of climate change is required for identifying how stream ecosystems vulnerable to these changes, and ultimately to guide the development of robust strategies for reducing risk in the face of changing climatic conditions. Here I used physically based hydrologic modeling to improve understanding of how climate change may impact streamflow regimes and advance some of the cyberinfrastructure and GIS methodologies that support physically based hydrologic modeling by: (1) using a physically based model …

Rhizosphere Interactions Between Copper Oxide Nanoparticles And Wheat Root Exudates In A Sand Matrix; Influences On Bioavailability And Uptake, Paul Mcmanus

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Copper oxide nanoparticles (CuO NPs) are extremely small particles (less than 1 nm in one or more dimension, or one billionth (10^-9) of a meter) used in a diverse range of industries. They have been shown to travel through water systems, and like pharmaceuticals, can end up in wastewater treatment plants and then be land applied as biosolids, where crops are grown for animal consumption, potentially leading to food chain accumulation.

Cu is an essential micronutrient for plants, but is phytotoxic at higher concentrations. CuO NPs present an increasingly real environmental threat to agriculture in soils treated with …

Understanding Pyrotechnic Shock Dynamics And Response Attenuation Over Distance, Richard J. Ott

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Component requirements govern design and production in the aerospace industry. One such potential requirement for a component is the survival and continued function upon exposure to shock environments. A shock event is a high amplitude, short duration traveling wave that induces large loads on components in its path that can cause degradation of electronic components, cracks and fractures in brittle materials, local plastic deformation, and materials to experience accelerated fatigue life. In defining these environments for new structures, industry experts rely mainly on empirical data. Measurements from similar structures are scaled and enveloped to create a predicted bounding case. This …

A Comprehensive Safety Analysis Of Diverging Diamond Interchanges, Holly Lloyd

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With the implementation of new roadway configurations, there is a great need to study the influence of the roadway design on the crash rate. Utah is one of the leading states in the implementation of the Diverging Diamond Interchange.

In order to determine the effects of the new roadway configuration on the safety of the intersection, this study employs an Empirical Bayes before-after study of the crash rates at selected Diverging Diamond Interchanges in Utah. The results of the Empirical Bayes method were also used to calculate crash modification factors. The total number of crashes at each site were analyzed. …

Live-Load Test And Finite-Element Model Analysis Of A Steel Girder Bridge, Jake L. Morrill

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah Transportation Center in conjunction with the Mountain Plains Consortium sponsored a study to investigate the performance, and condition of a steel, twin, I-girder bridge. The bridge is located on the Idaho-Oregon border near Payette, Idaho, and was designed to carry traffic over the Snake River.

Bridge Diagnostics Inc. was contracted by the Idaho Transportation Department to perform a live-load test on the bridge. This testing included the placement of 62 gauges that measured the response of the bridge as heavy trucks were driven across it.

A 3-D finite-element model of the bridge was generated and compared to the …

A New Low-Cost Microstrip Antenna Array For 60 Ghz Applications, Darwin J. Joaquin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The use of telecommunications and the amount of data exchanged continue to grow at exponential rates. New technologies allowing for higher data transfer speeds while keeping the products affordable are required. Among these technologies, the WiGig protocol promises to be a shorter-range complement for high-speed Wi-Fi. One of the most important elements in a communication system are the antennas. For this reason, it is of great interest to have antennas that keep on pace with the other elements of the system. It is important to have affordable and high performance antennas to expand the use of the technology. This research …

Production Of Synthetic Spider Silk Fibers, Cameron G. Copeland

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dragline spider silk is among the strongest known biomaterials. It is the silk used for the framework of the web and it is used to catch the spider if it falls. As such, it is stronger and much more flexible than KEVLAR©. Studies show that dragline silk is made of two proteins, Major Ampullate Spider Proteins 1 and 2 (MaSp1 and MaSp2). Due to its incredible mechanical properties, spider silk is being considered for use as a new biomaterial for drug delivery and tendon and ligament replacement/repair, as well as athletic gear, military applications, airbags, and tire cords. However, spiders …

The Effects Of Meter Orientation Downstream Of A Short Radius Elbow On Electromagnetic Flow Meters, Jared C. Justensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electromagnetic flowmeters (known as magnetic flow meters) are a widely used type of flowmeter. The accuracy of magnetic flow meters are a function of several factors, not the least of which is the flow condition inside the pipe. It has been shown that disturbances in the velocity profile affects the accuracy of a magnetic flow meter (Luntta, 1998). Accordingly, manufacturers of magnetic flow meters give installation guidelines. These guidelines help prevent the user from installing the meter in a pipe configuration that is likely to cause the meter to produce inaccurate results. Although most manufacturers provide recommendations about the amount …

Application Of Computational Fluid Dynamics In Flow Measurement And Meter Design, Zachary B. Sharp

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Flow measurement has been an important part of society for hundreds of years. For this reason there are many methods to measure flow rates both in open channel scenarios like irrigation canals and also in closed conduits like pipelines that supply water for human use. This research focused on Venturi flow meters which have been used to measure flow since the 1890’s. The object of this research was to use computational fluid dynamics and laboratory data to provide industry with applicable answers to some under researched areas in flow measurement. The areas chosen for this research include areas requested by …

The Application Of Unmanned Aerial Vehicle To Precision Agriculture: Chlorophyll, Nitrogen, And Evapotranspiration Estimation, Manal Elarab

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Precision agriculture (PA) is an integration of a set of technologies aiming to improve productivity and profitability while sustaining the quality of the surrounding environment. It is a process that vastly relies on high-resolution information to enable greater precision in the management of inputs to production. This dissertation explores the usage of multispectral high resolution aerial imagery acquired by an unmanned aerial systems (UAS) platform to estimate three fundamental crop parameters (plant chlorophyll, leaf nitrogen and crop water demand). The UAS acquired imagery in the visual, near infrared and thermal infrared spectra with a resolution of less than a meter …

Anaerobic Digestion Process Stability And The Extension Of The Adm1 For Municipal Sludge Co-Digested With Bakery Waste, Morris Elya Demitry

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The anaerobic digestion process is used to treat and convert waste organic matter to biogas (principally methane and carbon dioxide) through biological, chemical and physical reactions. The biogas can be used as a source of energy recovery. In order to increase the biogas production rate, two different kinds of waste (municipal wastewater treatment sludge and bakery waste) were mixed together to enhance the anaerobic process and increase the biogas production in pilot scale reactors. The process succeeded in increasing biogas production and at the same time kept the process of treatment effective when high rates of organics were fed to …

Towards Alternative Pathways: Nontraditional Student Success In A Distance-Delivered, Undergraduate Engineering Transfer Program, Angela L. Minichiello

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nontraditional students, including those who delay college entry, attend college part-time, work full-time, or financially support themselves or dependents, are highly underrepresented in engineering education. Recently, the United States began emphasizing a need to access this untapped human potential. U.S. educational policymakers now seek increased nontraditional student participation in engineering education through the creation of robust new pathways—within and between 2- and 4- year institutions—to undergraduate engineering degrees.

To be impactful, alternative pathways must be grounded in knowledge related to nontraditional student success in engineering. To access this knowledge, this study qualitatively examined the experiences of 14 nontraditional students who …

Microalgae Sorption Of Ten Individual Heavy Metals And Their Effects On Growth And Lipid Accumulation, Eric M. Torres

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study is to determine the potential microalgae have for being a heavy metal remediation tool. Heavy metals are naturally occurring elements that can be found inside the earth or on its surface. Typically, heavy metals are found naturally at low concentrations. However, through human activities, heavy metals are continually making their way to the surface and being concentrated. This happens largely through mining and manufacturing operations. For example, NiCd batteries produce waste containing nickel and cadmium, and paper manufacturing produces waste containing high levels of lead. As underdeveloped nations continue to industrialize and the world population …

Live Load Testing And Analysis Of A 48-Year-Old Double Tee Girder Bridge, Victor J. Torres

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A 48-year-old prestressed double tee girder bridge located on Icy Springs road in Coalville, Utah, was tested for live load. The test measured strains, deflections and rotations. The instruments used for measuring the respective measurements were strain gages, deflectometers ("twangers") and tiltmeters.

From the recorded measurements a finite element model (FEM) was calibrated to validate the modeling techniques based on the test data. The FEM implemented two joint link elements to connect the flanges of the FEM deck to model the transverse load distribution of the bridge deteriorated shear connectors. The abutment restraints were modeled by one joint link elements. …

Synthetic Spider Silk Sustainability Verification By Techno-Economic And Life Cycle Analysis, Alan Edlund

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Major ampullate spider silk represents a promising biomaterial with diverse commercial potential ranging from textiles to medical devices due to the excellent physical and thermal properties from the protein structure. Recent advancements in synthetic biology have facilitated the development of recombinant spider silk proteins from Escherichia coli (E. coli), alfalfa, and goats. This study specifically investigates the economic feasibility and environmental impact of synthetic spider silk manufacturing. Pilot scale data was used to validate an engineering process model that includes all of the required sub-processing steps for synthetic fiber manufacture: production, harvesting, purification, drying, and spinning. Modeling was constructed modularly …

Computational Fluid Dynamic Modeling Of Natural Convection In Vertically Heated Rods, Mahesh Surendran

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Natural convection is a phenomenon that occurs in a wide range of applications such as cooling towers, air conditioners, and power plants. Natural convection may be used in decay heat removal systems such as spent fuel casks, where the higher reliability inherent of natural convection is more desirable than forced convection. Passive systems, such as natural convection, may provide better safety, and hence have received much attention recently. Cooling of spent fuel rods is conventionally done using water as the coolant. However, it involves contaminating the water with radiation from the fuel rods. Contamination becomes dangerous and difficult for humans …

Ssaga: Streaming Multiprocessors (Sms) Sculpted For Asymmetric General Purpose Graphics Processing Unit (Gpgpu) Applications, Shamik Saha

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The evolution of the Graphics Processing Units (GPUs) over the last decade, has reinforced general purpose computing while sustaining a steady performance growth in graphics intensive applications. However, the immense performance improvement GPUs are already close to the abominable power wall. With a massive popularity of the mobile devices running general-purpose GPU (GPGPU) applications, it is of utmost importance to ensure a high energy efficiency, while meeting the strict performance requirements. Hence, a flexible GPU design paradigm is the need of the hour.

In this work, using a system level Computer Aided Design (CAD) technique, we propose SSAGA - …

Design Of Miniaturized Time-Of-Flight Reflectron Mass Spectrometer For Upper Atmosphere Density Measurements, Michelle Lynn Pyle

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Upper atmosphere and solar events can have strong impacts on the communication, power, and navigation systems we use every day. Modeling atmospheric dynamics, or the changes and reactions of different regions of the atmosphere, can help improve understanding and predictions of the effects of solar events. A suite of measurements of the upper atmosphere, including wind, temperature, and composition measurements, is used to build atmospheric models. Current atmospheric models are very sophisticated but need additional data to fully model atmospheric dynamics. In the past, measurements used to determine atmospheric composition have been performed using mass spectrometer instruments on full-size satellites. …