Engineering Commons^™

High-Pressure Properties Of Several Narrow Bandgap Semiconductors From First-Principles Calculations, Andrew Michael Alvarado

UNLV Theses, Dissertations, Professional Papers, and Capstones

The electronic, thermodynamic, and structural properties of three semiconducting materials, ZnO, InN, and PbS, at high pressure are investigated utilizing first-principles calculations based on density function theory. The first two systems, ZnO and InN, crystalize as hexagonal structures at ambient conditions and transition to a cubic structure at higher pressures. The last system, PbS, is cubic at ambient conditions, but transitions to an orthorhombic structure at higher pressure. At ambient conditions, these materials are well known semiconductors with vast amount of research and a variety of wide ranging applications in electrical devices. However, there is a lack of understanding of …

Effects Of Vertical Ground Motion On Seismic Performance Of Reinforced Concrete Flat-Plate Buildings, Sara Jean George

UNLV Theses, Dissertations, Professional Papers, and Capstones

Reinforced concrete flat plate is a type of structural system widely used for office and residential buildings in many areas including those with high seismic risk. In the regions of high seismicity, moment frames or shear walls are employed to resist lateral loading while the flat-plate system is designed to primarily resist gravity loading. Flat-plate structures must maintain lateral deformation capacity as well as resist gravity loading under seismic loads. The deformation capacity of a slab-column connection is a function of vertical shear transferred from slab to column. The effects of vertical loading become even more exaggerated when the flat-plate …

Mcnp6 Computational-Based Sensitivity Propagation Analysis Of Continuous Neutron Cross-Sections Using The Godiva (Hmf-001) And The Godiver (Hmf-004) Benchmark Criticality Study Cases, Lawrence James Lakeotes

UNLV Theses, Dissertations, Professional Papers, and Capstones

There has been a reduction in funding for theoretical and applied research for improving the nation's database of continuous neutron cross-sections at BNL-NNDC. From 1940 through the late 1980s, research and applied development produced volumes of reliable neutron continuous cross-sections for many isotopes. Currently, the cross-section work has been mainly computational. The focus of this research is mainly centered on the requirements for improving thermal cross-sections to support reactor operations and fuel storage. The research efforts will also helpfully aid in the fast fission spectrum in order to support fast reactor designs for improving safety analysis and feedback coefficients.

This …

Neutron-Gamma Discrimination In Elpasolite Scintillator Detector, Brittany Morgan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Existing nuclear stockpiles and weapons-making capabilities imperil the global community. Current nonproliferation efforts involve the research and development of newer, more efficient detection systems that can be deployed for the interdiction and monitoring of special nuclear materials (SNM). Spontaneous and induced fission events in SNM produce neutrons and gamma rays, which can be detected and analyzed, in particular, using scintillator detectors. Various electronic data acquisition systems and data analysis methods have been employed to record and characterize neutron and photon signatures. The goal of this thesis is to develop a new method of discrimination between neutrons and photons in the …

Vision-Based Intersection Monitoring: Behavior Analysis & Safety Issues, Mohammad Shokrolah Shirazi

UNLV Theses, Dissertations, Professional Papers, and Capstones

The main objective of my dissertation is to provide a vision-based system to automatically understands traffic patterns and analyze intersections. The system leverages the existing traffic cameras to provide safety and behavior analysis of intersection participants including behavior and safety. The first step is to provide a robust detection and tracking system for vehicles and pedestrians of intersection videos. The appearance and motion based detectors are evaluated on test videos and public available datasets are prepared and evaluated. The contextual fusion method is proposed for detecting pedestrians and motion-based technique is proposed for vehicles based on evaluation results. The detections …

Longitudinal Imaging Of Microvascular Remodelling In Proliferative Diabetic Retinopathy Using Adaptive Optics Scanning Light Ophthalmoscopy, Toco Yuen Ping Chui, Alexander Pinhas, Alexander Gan, Moataz Razeen, Nishit Shah, Eric Cheang, Chun L. Liu, Alfredo Dubra, Richard B. Rosen

Biomedical Engineering Faculty Research and Publications

Purpose

To characterise longitudinal changes in the retinal microvasculature of type 2 diabetes mellitus (T2DM) as exemplified in a patient with proliferative diabetic retinopathy (PDR) using an adaptive optics scanning light ophthalmoscope (AOSLO).

Methods

A 35-year-old T2DM patient with PDR treated with scatter pan-retinal photocoagulation at the inferior retina 1 day prior to initial AOSLO imaging along with a 24-year-old healthy control were imaged in this study. AOSLO vascular structural and perfusion maps were acquired at four visits over a 20-week period. Capillary diameter and microaneurysm area changes were measured on the AOSLO structural maps. Imaging repeatability was established using …

Automatic Detection Of Cone Photoreceptors In Split Detector Adaptive Optics Scanning Light Ophthalmoscope Images, David Cunefare, Robert F. Cooper, Brian P. Higgins, David F. Katz, Alfredo Dubra, Joseph Carroll, Sina Farsiu

Biomedical Engineering Faculty Research and Publications

Quantitative analysis of the cone photoreceptor mosaic in the living retina is potentially useful for early diagnosis and prognosis of many ocular diseases. Non-confocal split detector based adaptive optics scanning light ophthalmoscope (AOSLO) imaging reveals the cone photoreceptor inner segment mosaics often not visualized on confocal AOSLO imaging. Despite recent advances in automated cone segmentation algorithms for confocal AOSLO imagery, quantitative analysis of split detector AOSLO images is currently a time-consuming manual process. In this paper, we present the fully automatic adaptive filtering and local detection (AFLD) method for detecting cones in split detector AOSLO images. We validated our algorithm …

A Stabilized Finite Element Dynamic Overset Method For The Navier-Stokes Equations, Chao Liu

Masters Theses and Doctoral Dissertations

In terms of mesh resolution requirements, higher-order finite element discretization methods offer a more economic means of obtaining accurate simulations and/or to resolve physics at scales not possible with lower-order schemes. For simulations that may have large relative motion between multiple bodies, overset grid methods have demonstrated distinct advantages over mesh movement strategies. Combining these approaches offers the ability to accurately resolve the flow phenomena and interaction that may occur during unsteady moving boundary simulations. Additionally, overset grid techniques when utilized within a finite element setting mitigate many of the difficulties encountered in finite volume implementations. This research presents the …

A Stabilized Finite Element Dynamic Overset Method For The Navier-Stokes Equations, Chao Liu

Masters Theses and Doctoral Dissertations

In terms of mesh resolution requirements, higher-order finite element discretization methods offer a more economic means of obtaining accurate simulations and/or to resolve physics at scales not possible with lower-order schemes. For simulations that may have large relative motion between multiple bodies, overset grid methods have demonstrated distinct advantages over mesh movement strategies. Combining these approaches offers the ability to accurately resolve the flow phenomena and interaction that may occur during unsteady moving boundary simulations. Additionally, overset grid techniques when utilized within a finite element setting mitigate many of the difficulties encountered in finite volume implementations. This research presents the …

Simultaneous Optimization And Sampling Of Agent Trajectories Over A Network, Hala Mostafa, Akshat Kumar, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We study the problem of optimizing the trajectories of agents moving over a network given their preferences over which nodes to visit subject to operational constraints on the network. In our running example, a theme park manager optimizes which attractions to include in a day-pass to maximize the pass’s appeal to visitors while keeping operational costs within budget. The first challenge in this combinatorial optimization problem is that it involves quantities (expected visit frequencies of each attraction) that cannot be expressed analytically, for which we use the Sample Average Approximation. The second challenge is that while sampling is typically done …

Approximate Inference Using Dc Programming For Collective Graphical Models, Duc Thien Nguyen, Akshat Kumar, Hoong Chuin Lau, Daniel Sheldon

Research Collection School Of Computing and Information Systems

Collective graphical models (CGMs) provide a framework for reasoning about a population of independent and identically distributed individuals when only noisy and aggregate observations are given. Previous approaches for inference in CGMs work on a junction-tree representation, thereby highly limiting their scalability. To remedy this, we show how the Bethe entropy approximation naturally arises for the inference problem in CGMs. We reformulate the resulting optimization problem as a difference-of-convex functions program that can capture different types of CGM noise models. Using the concave-convex procedure, we then develop a scalable message-passing algorithm. Empirically, our approach is highly scalable and accurate for …

Robust Influence Maximization, Meghna Lowalekar, Pradeep Varakantham, Akshat Kumar

Research Collection School Of Computing and Information Systems

Influence Maximization is the problem of finding a fixed size set of nodes, which will maximize the expected number of influenced nodes in a social network. The number of influenced nodes is dependent on the influence strength of edges that can be very noisy. The noise in the influence strengths can be modeled using a random noise or adversarial noise model. It has been shown that all random processes that independently affect edges of the graph can be absorbed into the activation probabilities themselves and hence random noise can be captured within the independent cascade model. On the other hand, …

Efspredictor: Predicting Configuration Bugs With Ensemble Feature Selection, Bowen Xu, David Lo, Xin Xia, Ashish Sureka, Shanping Li

Research Collection School Of Computing and Information Systems

The configuration of a system determines the system behavior and wrong configuration settings can adversely impact system's availability, performance, and correctness. We refer to these wrong configuration settings as configuration bugs. The importance of configuration bugs has prompted many researchers to study it, and past studies can be grouped into three categories: detection, localization, and fixing of configuration bugs. In the work, we focus on the detection of configuration bugs, in particular, we follow the line-of-work that tries to predict if a bug report is caused by a wrong configuration setting. Automatically prediction of whether a bug is a configuration …

Advances In Repurposing And Recycling Of Post-Vehicle-Application Lithium-Ion Batteries, Charles R. Standridge, Lindsay Corneal, Nicholas Baine

Mineta Transportation Institute

Increased electrification of vehicles has increased the use of lithium-ion batteries for energy storage, and raised the issue of what to do with post-vehicle-application batteries. Three possibilities have been identified: 1) remanufacturing for intended reuse in vehicles; 2) repurposing for non-vehicle, stationary storage applications; and 3) recycling, extracting the precious metals, chemicals and other byproducts. Advances in repurposing and recycling are presented, along with a mathematical model that forecasts the manufacturing capacity needed for remanufacturing, repurposing, and recycling. Results obtained by simulating the model show that up to a 25% reduction in the need for new batteries can be achieved …

Temporally And Spatially Resolved Quantification Of Hemodynamic Forces And Endothelial Mechanics, Lori M. Lambert

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The endothelium is a thin layer of endothelial cells that line the interior surface of an artery. Due to their direct contact with blood flow, endothelial cells experience varying hemodynamic forces and respond to these forces by altering their morphology. When plaque and other substances accumulate in the walls of arteries, i.e., atherosclerosis, endothelial cells have abnormal responses to blood flow. Studying atherosclerosis progression is, therefore, a two-fold investigation into 1) the hemodynamic forces that cause endothelial responses, and 2) the biological and mechanical responses of endothelial cells. The ultimate goal of this study was to develop an experimental …

Diffusion Modeling And Device Development For Peritoneal Membrane Oxygenation, Liana Hatoum

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) is a pulmonary disease that causes hypoxemia and respiratory failure. The mortality rate for ARDS ranges between 27% and 45%. Current treatments including mechanical ventilation and extracorporeal membrane oxygenation (ECMO) are often associated with high risk complications including barotrauma, infection, thrombosis, and hemorrhage. Alternative pulmonary support techniques are needed to improve the survival rate of patients suffering from ARDS. Previous studies introducing pure O₂ gas, perfluorocarbons and red blood cells into the intraperitoneal (IP) cavity have reported no effect or only a mild increase in oxygenation. Here we report peritoneal membrane oxygenation (PMO) using …

Performance Assessment Of Deteriorated And Retrofitted Steel Hp Piles, Steven T. Stauffer

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Deterioration of aging bridges can be attributed to an assortment of mechanisms throughout the structure, with remediation policies also varying. This study focused on assessing the validity of the Nebraska Department of Roads’ (NDOR) reinforced concrete encasement retrofit for corroded steel HP piles. Experiments were designed and conducted to test the capacity of the NDOR retrofit and evaluate failure limit states. Two pile locations were considered: abutment and pile bent. For each location there was a non-deteriorated, deteriorated, and retrofitted case. These cases represented the pile at key stages during its life. NDOR’s concrete encasement retrofit provided the required stability …

Numerical Simulation Of Tip Clearance Impact On A Pumpjet Propulsor, Lin Lu, Guang Pan, Jing Wei, Yipeng Pan

Ocean Engineering and Marine Sciences Faculty Publications

Numerical simulation based on the Reynolds Averaged NaviereStokes (RANS) Computational Fluid Dynamics (CFD) method had been carried out with the commercial code ANSYS CFX. The structured grid and SST keu turbulence model had been adopted. The impact of noncondensable gas (NCG) on cavitation performance had been introduced into the Schnerr and Sauer cavitation model. The numerical investigation of cavitating flow of marine propeller E779A was carried out with different advance ratios and cavitation numbers to verify the numerical simulation method. Tip clearance effects on the performance of pumpjet propulsor had been investigated. Results showed that the structure and characteristics of …

Predicting The Market Share Of A New Airport In Multi-Airport Cities: The Case Of Lagos, Samson Oladele Fatokun

Doctoral Dissertations and Master's Theses

The primary objective of the study was to develop an empirical model that combines the contingent valuation method (CVM) with the isochrone analysis to predict the market shares of new airports in multi-airport cities and to apply the model to the case of Lekki International Airport (LIA), the proposed second airport in Lagos, Nigeria. In addition to predicting the market share that LIA could attain, the study also identified and analyzed the catchment areas as well as the willingness to pay (WTP) of would-be LIA passengers. Furthermore, the research identified the determinants of airport choice in the Nigerian market. The …

Investigation Of Pin Fin Cooling Channels For Applications In Gas Turbines, Royce Fernandes

Doctoral Dissertations and Master's Theses

Gas turbine blades are often cooled using internal cooling channels to prevent failure at temperatures beyond material limitations. Pin fin channels are commonly used on the trailing edge of the blades, where they enhance heat transfer and also provide structural support. This study focuses on the validation of several commercially available RANS turbulence models in CFD, that are used to computationally simulate the flow features inside a pin fin cooling channel. Turbulence models investigates are: Menter’s kω SST, realizable k-ε, and a quadratic formulation of the realizable k-ε model. The geometry investigated is a staggered 8 row pin fin channel. …

The Effect Of Axial Spacing Of Constant And Variable Blockages On The Deflagration-To-Detonation Transition In A Pulse Detonation Engine, Nicole Gagnon

Doctoral Dissertations and Master's Theses

An investigation was conducted into the effects of obstacle spacing on the deflagration-to-detonation transition section length in a pulse detonation engine. Testing was conducted with one hundred and ninety-five different obstacle, and spacing configurations. The configurations included constant, as well as variable spacing between obstacles. The goal of this investigation was to correlate the spacing between obstacles and the blockage ratio of the obstacles with the detonation success and the shortening of the DDT section. The ten cases that achieved the highest percentage of detonations were investigated further to determine the distance needed for the deflagration-to-detonation transition. A 33% blockage …

Optical Tracking And Spectral Characterization Of Cubesats For Operational Missions, Forrest Gasdia

Doctoral Dissertations and Master's Theses

Orbital debris in low Earth orbit is of growing concern to operational satellites from the government and commercial sector. With an uptick in worldwide satellite launches and the growing adoption of the CubeSat standard, the number of small objects in orbit are increasing at a faster pace than ever. As a result, a cascading collision event seems inevitable in the near future.

The United States Strategic Command tracks and determines the orbit of resident space objects using a worldwide network of radar and optical sensors. However, in order to better protect space assets, there has been increased interest in not …

Vibration Analysis Of A Composite Wing Box With Arbitrarily Shaped Spars And Ribs, Rossana R. Fernandes

Doctoral Dissertations and Master's Theses

In this research, the free vibration analysis of composite wing boxes with curvilinear spars and ribs is performed. Modern manufacturing technologies, such as Electron Beam Freeform Fabrication and Friction Stir Welding, have allowed the manufacturing of arbitrarily shaped stiffeners. Curvilinear stiffeners provide flexibility in design as they can assume an infinite number of paths. Curvilinear spars and ribs can in some instances provide a better vibration and static response than their straight counterparts while reducing the overall mass of the structure. An equivalent continuum plate model of a wing box using energy formulations is proposed at the preliminary design stage …

Magneto-Rheological Fluid Device As Artificial Feel Force System On Aircraft Control Stick, Vignesh Manoharan

Doctoral Dissertations and Master's Theses

The conventional feel system in any aircraft occupies large space in the cockpit and has complicated designs. The primary objective of this research is to develop an artificial feel force system that can overcome some drawbacks of the current feel force system. A novel feel system using magneto-rheological (MR) fluid is constructed to precisely control the shear stress under the magnetic field. To validate the functionality of the MR artificial feel system, the final system is fabricated and multiple tests are performed to acquire force-velocity characteristics that are compared to the mathematical model derived. In addition, the reference model of …

Improving Kinematic Accuracy Of Soft Wearable Data Gloves By Optimizing Sensor Locations, Donghyun Kim, Sang Wook Lee, Hyung-Soon Park

Electrical and Computer Engineering Faculty Research & Creative Works

Bending sensors enable compact, wearable designs when used for measuring hand configurations in data gloves. While existing data gloves can accurately measure angular displacement of the finger and distal thumb joints, accurate measurement of thumb carpometacarpal (CMC) joint movements remains challenging due to crosstalk between the multi-sensor outputs required to measure the degrees of freedom (DOF). To properly measure CMC-joint configurations, sensor locations that minimize sensor crosstalk must be identified. This paper presents a novel approach to identifying optimal sensor locations. Three-dimensional hand surface data from ten subjects was collected in multiple thumb postures with varied CMC-joint flexion and abduction …

Direct Printing Of Microstructures By Femtosecond Laser Excitation Of Nanocrystals In Solution, W. Shou, Heng Pan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

A Brief Review Of Security In Emerging Programmable Computer Networking Technologies, Egemen K. Çetinkaya

Electrical and Computer Engineering Faculty Research & Creative Works

Recent programmable networking paradigms, such as cloud computing, fog computing, software- defined networks, and network function virtualization gain significant traction in industry and academia. While these newly developed networking technologies open a pathway to new architectures and enable a faster innovation cycle, there exist many problems in this area. In this article, we provide a review of these programmable networking architectures for comparison. Second, we provide a survey of security attacks and defense mechanisms in these emerging programmable networking technologies.

Shear Behavior Of High-Strength Self-Consolidating Concrete In Nebraska University Bridge Girders, Alex Griffin, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Current reinforced and prestressed concrete design equations were developed for conventional concrete elements. Self-consolidating concrete (SCC) typically contains a lower coarse aggregate content and size than conventional concrete, which potentially hinders the aggregate interlock contribution to a concrete's shear strength. Thus, shear design equations must be verified with SCC mixtures. Two full-scale precast, prestressed concrete Nebraska University girders were tested to assess the shear behavior of high-strength SCC. Both girders were designed to permit two tests on each girder, both with and without shear reinforcement. Ultimate shear loads and crack patterns were documented and compared with code estimates, finite element …

Synthesis, Characterization, And Electronic Properties Of Novel 2d Materials : Transition Metal Dichalcogenides And Phosphorene., George Anderson

Electronic Theses and Dissertations

Scaling electronic devices has become paramount. The current work builds upon scaling efforts by developing novel synthesis methods and next generation sensing devices based on 2D materials. A new combination method utilizing thermal evaporation and chemical vapor deposition was developed and analyzed to show the possibilities of Transition Metal Dichalcogenide monolayers and heterostructures. The materials produced from the above process showed high degrees of compositional control in both spatial dimensions and chemical structure. Characterization shows controlled fabrication of heterostructures, which may pave the way for future band gap engineering possibilities. In addition, Phosphorene based field effect transistors, photodetectors, and gas …

Effect Of Non-Uniform Air-Side Velocity Distribution On Heat Transfer Model Predictions For Microchannel Condenser., Zachary Chapin

Electronic Theses and Dissertations

This is a study of the effects on heat transfer capacity predictions of microchannel condensers when airflow is maldistributed due to the shape of the condenser. The three shapes investigated in this study are flat, U-shape and roll. Each coil was tested in a water calorimeter and those results were compared to the model prediction. The model prediction was calculated using CoilDesigner™ modeling software with standard correlations. Using the uniform airflow assumption, the model over predicted the heat capacity measured in the calorimeter by 5-11% depending on the coil and inlet conditions. The local airflow velocity was measured using a …