Engineering Commons^™

Stokes Flow Past A Two-Layers Heterogeneous Porous Sphere With The Effect Of Stress Jump Condition: An Exact Solution, Kun Yang, Xin Yan, Kambiz Vafai

Sixth International Conference on Porous Media and Its Applications in Science, Engineering and Industry

The flow past a porous sphere has extensive industrial and engineering applications, such as the flow of pulverized coals particulate during combustion, sedimentation of fine particulate suspensions, flow in porous beds etc. Several studies have been done about the flow past a porous body under different models and boundary conditions. The models used in their investigations can be divided into the following categories: (i) Adopting Darcy equation to describe the flow in porous media and Stokes equations to describe the flow in the free fluid with the continuity conditions of velocity and pressure at the interface or the Beavers-Joseph (BJ) …

Experimental Research On Internal Convection Heat Transfer Of Supercritical Pressure Co2 In Porous Media, Le Zhang, Pei-Xue Jiang, Rui-Na Xu, Zhen-Chuan Wang

Sixth International Conference on Porous Media and Its Applications in Science, Engineering and Industry

The flow and heat transfer of fluids at supercritical pressure in porous media has attracted much attention due to its extensive applications, such as supercritical water-cooled nuclear reactor, CO₂ gas cooled reactor, transpiration cooling and supercritical CO₂ solar thermal power generation system. There are mainly two theories to describe convection heat transfer in porous media, i.e., the local thermal equilibrium model (LTE) and the local thermal non-equilibrium model (LTNE). Compared with LTE model, the LTNE model is a more detailed model that uses two energy equations to describe heat transport in the solid and fluid. The internal heat …

The Influence Of Cold Rolling On The Pore Morphology And Flow Resistivity Of Porous Aluminum, Nicolas Lippitz, Samir Maudarbocus, Joachim Rösler

Sixth International Conference on Porous Media and Its Applications in Science, Engineering and Industry

Materials with an open porosity are used in many applications, such as filters, acoustic absorbers or heat exchangers. For these applications the pore size and shape as well as the depending flow resistivity are important parameters and need to be adjusted for the specific case. The material parameters are usually defined by the manufacturing process and are therefore signature for different types of porous materials. In this study the porosity, pore shape and the depending flow resistivity of a given material are adjusted using a cold rolling process. The material chosen is a porous aluminum with a porosity of about …

Flow Of Shale Gas In Tight Rocks Using A Non-Linear Transport Model With Pressure Dependent Model Parameters, Nadeem A. Malik, Iftikhar Ali, Bilal Chanane, Ryad A. Ghanam

Sixth International Conference on Porous Media and Its Applications in Science, Engineering and Industry

A new source of energy has recently been discovered from unconventional hydrocarbon reservoirs, such as shale gas deposits. Shale gas is found in tight porous rocks which are characterised by nano-scale size porous networks with ultra-low permeability [1,2]. The modelling of transport through such tight porous media is very challenging because it is a relatively new discipline and not much is known but transport processes in them, and little data is available; but it is a growing sector and must be addressed. Here, we apply a recently developed non-linear gas transport model [3], to reservoir simulations of single-phase gas through …

Quantifying The Effects Of Humidity On Density Altitude Calculations For Professional Aviation Education, Thomas A. Guinn, Randell J. Barry

International Journal of Aviation, Aeronautics, and Aerospace

The effects of humidity on density altitude are quantified in detail and graphically represented as a function of temperature and dew-point temperature for ease of use in professional aviation education. A ten-year climatology of dew-point temperatures for various representative locations throughout the United States is created to provide a basis for comparison and use with the graphical displays. Density altitude is demonstrated to be a function only of dew-point temperature for a given pressure altitude. The absolute errors between density altitude calculations that incorporate humidity to those that do not are combined with linear regression techniques to create a simple …

Nanotechnology Applications In Medical Diagnosis, Imaging, And Therapy, Mansoor M. Amiji

Nanotechnology in Medicine: From Molecules to Humans

Tremendous advances in molecular and personalized medicine also present challenges for translation of innovative experimental approaches into clinically relevant strategies. To overcome some of these challenges, nanotechnology offers interesting solutions for disease prevention, diagnosis, and treatment. For many systemic diseases, overcoming biological barriers and target specific delivery are the key challenges. Additionally, newer generation of molecular therapies, such as gene therapy, oligonucleotides, and RNA interference (RNAi) require robust and highly specific intracellular delivery strategies for effective and clinically meaningful therapeutic outcomes.

In this presentation, I will cover several of our approaches for development of multifunctional engineered nano-systems for targeted therapies …

Improving Automated Global Detection Of Volcanic So2 Plumes Using The Ozone Monitoring Instrument (Omi), Verity Flower, Thomas Oommen, Simon Carn

Michigan Tech Publications, Part 1

Volcanic eruptions pose an ever-present threat to human populations around the globe, but many active volcanoes remain poorly monitored. In regions where ground-based monitoring is present the effects of volcanic eruptions can be moderated through observational alerts to both local populations and service providers such as air traffic control. However, in regions where volcano monitoring is limited satellite-based remote sensing provides a global data source that can be utilized to provide near real time identification of volcanic activity. This paper details the development of an automated volcanic plume detection method utilizing daily, global observations of sulphur dioxide (SO2) by the …

A Model Of Human Harm From A Falling Unmanned Aircraft: Implications For Uas Regulation, Andrew V. Shelley

International Journal of Aviation, Aeronautics, and Aerospace

This paper quantifies the human harm, in the form of fatalities and skull fractures, which could occur as a result of an unmanned aircraft falling from a height. The analysis is used to establish the maximum height at which an unmanned aircraft can be flown over people to achieve a level of safety consistent with the rate of ground fatalities from General Aviation. The maximum height is dependent on the aircraft mass and the population density of people on the ground below.

The results are used to inform a critical evaluation of recent recommendations from the FAA-chartered “Unmanned Aircraft Systems …

Toward Translating Near-Infrared Spectroscopy Oxygen Saturation Data For The Non-Invasive Prediction Of Spatial And Temporal Hemodynamics During Exercise, Laura M. Ellwein, Margaret M. Samyn, Michael E. Danduran, Sheila M. Schindler-Ivens, Stacy Liebham, John F. Ladisa Jr.

Exercise Science Faculty Research and Publications

Image-based computational fluid dynamics (CFD) studies conducted at rest have shown that atherosclerotic plaque in the thoracic aorta (TA) correlates with adverse wall shear stress (WSS), but there is a paucity of such data under elevated flow conditions. We developed a pedaling exercise protocol to obtain phase contrast magnetic resonance imaging (PC-MRI) blood flow measurements in the TA and brachiocephalic arteries during three-tiered supine pedaling at 130, 150, and 170 % of resting heart rate (HR), and relate these measurements to non-invasive tissue oxygen saturation (StO₂) acquired by near-infrared spectroscopy (NIRS) while conducting the same protocol. Local quantification …

Development Of Biocompatible Small-Molecule Spacers As Metal Oxide Nanoparticles' Stabilizing Agents, Galina Goloverda, Huy Do, Ezinne U. Agwaramgbo, Anastasia Labeaud, Rajesh Komati, Vladimir Kolesnichenko

Nanotechnology in Medicine: From Molecules to Humans

Development and study of the magnetic nanoparticles for biological and clinical applications remains one of the challenging research areas in chemistry and materials science. The performance of these particles as, for example, drug delivery, MRI, hyperthermia or cell tracking agents, depends on their magnetic susceptibility. Their ability to form stable aqueous colloids, the mobility, and diffusion properties in biological media, rely on organic coating, which is usually composed of hydrophilic biocompatible polymers such as dextrans or poly(ethylene glycol)s. Some areas of biomedical imaging, labeling and delivery application can benefit from magnetic nanoparticles with higher mobility and penetration, stronger interaction with …

Conference Program, Kambiz Vafai, Adrian Bejan, Oronzio Manca, Akira Nakayama

Sixth International Conference on Porous Media and Its Applications in Science, Engineering and Industry

No abstract provided.

Nanotechnologies For The Treatment Of Severe Diseases, Patrick Couvreur

Nanotechnology in Medicine: From Molecules to Humans

No Abstract,Please Click The Presentation.

Penetration Of Plga Nanoparticles Into The Intracranial Rat C6 Glioma: Influence Of Surfactant Coating, Yulia M Alinovskaya, Nadezhda Osipova, Olga Maksimenko, Svetlana Gelperina, Pavel Melnikov, Vladimir Baklaushev

Nanotechnology in Medicine: From Molecules to Humans

As shown by our previous studies, the PLGA nanoparticles (NP) coated with poloxamer 188 (P188) enable brain delivery of doxorubicin and its high anti-tumour effect against the intracranial glioblastoma in rats [1]. The objective of the present study was to evaluate the uptake of the P188-coated PLGA NP in the intracranial C6 glioma in rats. For visualization using scanning laser confocal microscopy (SLCM) and an intravital fluorescence imaging system Ivis^ÒSpectrum CT (Perkin-Elmer), the NP were labeled with DiI (DiI-PLGA NP). The DiI-PLGA NP were administered i.v. into rats with intracranial C6 glioma on day 15 after tumour implantation. …

Conference Program, Lola Eniola-Adefeso, Paolo Decuzzi

Nanotechnology in Medicine: From Molecules to Humans

No abstract provided.

Iron Oxide Nanoparticles With A Variable Size And An Iron Oxidation State For Imaging Applications, Vladimir Kolesnichenko, Galina Goloverda, Pavel Kucheryavy, Leonard Spinu

Nanotechnology in Medicine: From Molecules to Humans

Magnetite nanoparticles in the size range of 3.2-7.5 nm were synthesized with high yields under variable reaction conditions using high temperature hydrolysis of the precursor iron(II) and iron(III) chelated alkoxide complexes in surfactant-free diethylene glycol solutions. The average sizes of the particles were adjusted by changing the reaction temperature and time, and by using sequential growth technique. Reaction products formed as shelf-stable colloids. In order to obtain γ‑iron(III) oxide particles in the same range of sizes, diethylene glycol colloids of magnetite were oxygenated at room temperature. As-obtained colloids were characterized by DLS; powdery products obtained by coagulating them with oleic …

Lifelong Housing Design: User Feedback Evaluation Of Smart Objects And Accessible Houses For Healthy Ageing, Matteo Zallio, Niccolò Casiddu

Conference Papers

According to the latest research by the European Community and ISTAT (Italian National Institute of Statistics) surveys, Europe has the highest average age for its population. According to those data, in the near future, it could be necessary to move from a welfare model based on the centralization of care systems, to a system based on the distribution of certain healthcare facilities [1]. This means that the ageing population is ever increasing, thanks to better lifestyles, innovative medical care and wider access to different services. This work seeks to observe and analyse key implications of architectural and interior design features …

Automated Microscopy Platform For High-Throughput Analysis Of Cellular Characteristics, Hussam Ibrahim

Physics: Student Scholarship & Creative Works

Existing microscopy platforms allow analysis post-hoc, but not in real time. This is an issue in the world of Bioengineering because you are limited to performing further analysis on specimen. The aim of my research was to design a sophisticated system whereby information can be exchanged between the software which acquires images and software that analyzes the images immediately after acquisition. In this system, images would be acquired by the microscope and analyzed by customized scripts (MATLAB, Mathworks) in real time. Specifically, MATLAB would wait for new images to be saved on the hard drive, import these images, and perform …

Surface Roughness Effects On Light Propagation In Optical Light Pipes, Youngjin Park

Graduate Theses - Physics and Optical Engineering

Solid- and hollow-core light pipes are commonly employed to shape the intensity profile of high power lasers for applications in various technology industries such as the automobile, medical, and communications. There are several loss mechanisms present in solid-core glass and polymer light pipes, including absorption, bulk scattering in the material, surface scattering at the material-air interface, and Fresnel Loss at the material-air interface. Fresnel reflection and surface scattering losses typically dominate over other loss mechanisms in solid-core light pipes made of high quality optical materials. In order to analyze the losses in the light pipe, an approximate model is developed …

Engineering News, Summer 2016, School Of Engineering

Engineering News

No abstract provided.

The Influence Of Relative Particle Size And Material Interactions On The Flow-Induced Detachment Of Particles From A Microchannel, Morgan Brittany Mayfield

Graduate Theses - Chemical Engineering

Particulate transport in microfluidic channels is difficult due to confined geometries and low flow rates, which promote solids settling. To re-entrain these solids, the detachment behavior of closely-fitting particles from microchannel walls must be understood. Experiments were completed to examine the effects of particle size and material interactions on particle detachment velocity. Studies were conducted for various sizes of glass and poly(methyl methacrylate), PMMA, spheres in glass and poly(dimethyl siloxane), PDMS, microfluidic channels. In addition, an inexpensive method to produce monodisperse PMMA microparticles was developed. To analyze the effect of material interactions, the work of adhesion between the particle and …

The Aerodynamic Effects On A Cornering Ahmed Body, James Keogh, Tracie Barber, Sammy Diasinos, Graham Doig

Aerospace Engineering

As a vehicle travels through a corner, the flowfield observed from the vehicle׳s frame of reference becomes curved. This condition results in the relative flow angle and freestream velocity changing both across the width and along the length of the body. Wall-resolved Large Eddy Simulations were used to simulate a simple vehicle shape through three different radii corners. The variable flow angle and acceleration affected the pressure distribution along either side of the body and caused an increase in the size of the outboard C-pillar vortex, and an inboard decrease. Furthermore, an outboard extension of the separation bubble at the …

Recursive Non-Local Means Filter For Video Denoising With Poisson-Gaussian Noise, Redha A. Almahdi, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

In this paper, we describe a new recursive Non-Local means (RNLM) algorithm for video denoising that has been developed by the current authors. Furthermore, we extend this work by incorporating a Poisson-Gaussian noise model. Our new RNLM method provides a computationally efficient means for video denoising, and yields improved performance compared with the single frame NLM and BM3D benchmarks methods. Non-Local means (NLM) based methods of denoising have been applied successfully in various image and video sequence denoising applications. However, direct extension of this method from 2D to 3D for video processing can be computationally demanding. The RNLM approach takes …

Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon

Industrial and Manufacturing Engineering

The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Flight Physician - July, 2016, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twenty-one page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Attending To Scientific Practices Within Undergraduate Research Experiences, Gina Quan, Chandra Turpen, Andrew Elby

Faculty Publications

Ford (2015) argues for viewing “scientific practice” not as a list of particular skills, but rather, more holistically as “sets of regularities of behaviors and social interactions” among scientists. This conceptualization of scientific practices foregrounds how they meaningfully connect to one another and are purposefully employed in order to explain nature. We apply this framework in the context of undergraduate research experiences (UREs) to understand the early forms of student engagement in scientific practices, and how these specific forms of engagement may be consequential for students’ future participation. Using video from interviews with students and research mentors, we argue that …

Investigation Of Carbon Nanomaterials Embedded In A Cementitious Matrix, Clarissa A. Roe

Masters Theses & Specialist Projects

The objective of this thesis was to investigate whether the addition of carbon nanofibers had an effect on the splitting tensile strength of Hydro-Stone gypsum concrete. The carbon nanofibers used were single-walled carbon nanotubes (SWNT), buckminsterfullerene (C60), and graphene oxide (GO). Evidence of the nanofibers interacting with gypsum crystals in a connective manner was identified in both 1 mm thick concrete discs and concrete columns possessing a height of 2 in and a diameter of 1 in. Before imaging, the columns were subjected to a splitting tensile strength test. The results illustrate that while there is a general decrease in …

Inspire E-News 06-07 2016, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• WMU's 3D virtual labs provide hands-on learning around the world
• Engineering students develop high-tech motorcycle safety device
• Entrepreneurial engineer wins $10,000 award for software program
• WMU's research on safety of older drivers garners national recognition

Go With The Flow –Thermoelectric Energy, Shawn Bell

Middle School Lesson Plans

In this unit, students will learn how thermal energy be transferred and transformed. They will carry out investigations to gather evidence to support an explanation about direct conversion of heat into electrical energy. They will develop a model that shows the components of the system and changes in the system being investigated, and they will use evidence from the investigation to construct an explanation for how the energy flows.

Santa Clara Magazine, Volume 57 Number 3, Summer 2016, Santa Clara University

Santa Clara Magazine

26 - CAN’T THREAD A MOVING NEEDLE To tackle sexual assault on college campuses, a playwriting project comes to the screen. By Danae Stahlnecker ’15.

28 - MISSION CRITICAL When three students fell ill from meningitis-causing bacteria—which can be fatal—it meant the clock was ticking. And to get through this, it would take everybody’s help. By Harold Gutmann.

36 - “WHERE ARE THEY TAKING US?” A journal from the front lines of the Syrian refugee crisis in Greece. By Colleen Sinsky ’10.

40 - NO STRANGERS HERE Refugees, home, and work by Ameera Naguib ’16 from Jordan to Silicon Valley. …