Engineering Commons^™

Fuel Type Estimation Using Fuel System Parameters, Shambhavi Balasubramanian

Open Access Theses

A number of factors are responsible for an increased interest in alternative fuels for transportation and other uses. Among the most widely available alternative fuels are biodiesel and vegetable oil, both of which can be used to power a diesel engine. Biodiesel has higher density, viscosity, surface tension, sound velocity, and bulk modulus of elasticity than regular diesel fuel. This affects the fuelling, injection timing, and fuel spray and consequently the emission characteristics.

Estimation of fuel type is critical to the performance of the engine. Knowing the fuel type allows the engine controller to determine the proper fuel quantity and …

Roundabout Maintenance Flipbook, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This flipbook is a summary of the work published in the Roundabout Maintenance Manual by Indiana LTAP. This information was collected through a series of interviews with city engineers, public works directors, and street commissioners experienced in roundabout maintenance. It serves as a model to guide work crews in correct maintenance procedures.

Roundabout Maintenance Manual, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This maintenance manual serves as an additional resource for communities who have imple­mented roundabouts or are considering them. There are a few other published guides, such as the NCHRP Report 672, Roundabouts: An Informational Guide, and the Wisconsin DOT Facilities Develop­ment Manual. However, the information covered in these guides is very broad. This manual provides specific information regarding roundabout maintenance.

Medium Altitude Long Endurance Remotely Piloted Aircraft Training: A Pilot Study In Blended Learning, Zachary P. Waller, Thomas Petros, John Bridewell, Scott Kroeber, Neil Nowatzki

Aviation Faculty Publications

Since April of 2011, research and development efforts between the Air Force Research Laboratory (AFRL) and the University of North Dakota (UND) have progressed through the “Science and Technology for Warfighter Training and Aiding.” Cooperative Agreement. One product of these cooperative efforts has been a Heads Down Display (HDD) Menu Trainer. Designed to familiarize students with the layout and manipulation of the HDD menus for either the MQ-1 or MQ-9, a parallel pretest/posttest design was designed to examine the efficacy of this HDD menu trainer as training aid in traditional, blended, and distance pedagogies.

Results of a mixed ANOVA indicated …

Parameter Estimation For Hvac System Models From Standard Test Data, Hannah Luthman

Boise State University Theses and Dissertations

Nearly all cooling systems, and an increasing proportion of heating systems, utilize the vapor compression cycle (VCC) to provide and remove heat from conditioned spaces. Even though the application of VCC’s throughout the building environment is ubiquitous, effective and accessible models of the performance of these systems remains elusive. Such models could be important tools for VCC designers, building designers and building energy managers as well as those who are attempting to optimize building energy performance through the use of model-based control systems.

Strides have been made in developing lumped parameter models for VCC’s. In spite of these contributions, widespread …

Thermoelectric Material Property Measurement For Flexible Films, Courtney Hollar

Boise State University Theses and Dissertations

The market for wearable electronics and implantable medical devices continues to grow. Within the next several years, the wearable electronic and implantable medical devices market will reach $31.2 billion and $73.9 billion, respectively. Currently, the most commonly used power source is the rigid lithium ion battery. In order to further optimize the devices, flexible autonomous power sources, such as thermoelectric generators, can replace traditional battery systems.

Flexible thermoelectric films were created using a wet deposition approach and synthesized into ink suitable for either spin coating or screen printing. This study focuses on Seebeck coefficient, electrical conductivity, and thermal conductivity measurements. …

Position And Stiffness Control Of Inflatable Robotic Links Using Rotary Pneumatic Actuation, Charles Mansel Best

Theses and Dissertations

Inflatable robots with pneumatic actuation are naturally lightweight and compliant. Both of these characteristics make a robot of this type better suited for human environments where unintentional impacts will occur. The dynamics of an inflatable robot are complex and dynamic models that explicitly allow variable stiffness control have not been well developed. In this thesis, a dynamic model was developed for an antagonistic, pneumatically actuated joint with inflatable links.The antagonistic nature of the joint allows for the control of two states, primarily joint position and stiffness. First a model was developed to describe the position states. The model was used …

Profit Based Simulation Model For The Rail Transportation Industry, Mark Patrick Doran

Engineering Management & Systems Engineering Theses & Dissertations

Schedules often conflict in the rail transportation industry. Operations managers assign resources and make scheduling decisions with no visibility of the revenue, cost, and profitability characteristics of the route they are manipulating. Transit speed decisions focus on ensuring trains safely reach their destination on time with little regard given to the actual service needs of the customer. Although all customers want on-time deliveries, few actually pay a premium to garner this level of preferential treatment. Operating in this type of environment results in decisions that severely erode profits.

In this dissertation, a simulation model referred to as the Rail Profit …

Validating Low Dissolved Oxygen Measurements To Improve Process Performance And Control, Hailey Bradshaw

Civil & Environmental Engineering Theses & Dissertations

Conventional operation of wastewater treatment plants (WWTPs) is to maintain a dissolved oxygen (DO) concentration at or above 2.0 mg/L in the aeration process for biological nutrient removal (BNR). However, the adoption of operating at low DO in WWTP aeration systems has led to the improvement of process efficiency and reduced aeration energy requirements, making the transition to low DO favorable. Furthermore, as systems transition to oxygen-limiting conditions, the accuracy in DO measurements becomes increasingly important. Many plants use DO sensors to regularly control aeration processes, but their precision and accuracy at (ultra) low DO concentrations are less established. If …

Second Law Of Thermodynamics Analysis Of An Internal Combustion Engine Fueled With Methane, Muataz Abotabik

Masters Theses

The second law of thermodynamics is a powerful tool for calculating the amount of energy that can be converted to work (i.e., the exergy or availability of a system), which cannot be predicted using the first law. The objectives of this research project are to quantify the availability during the compression, combustion and expansion processes of a spark-ignited engine fueled with methane; and to highlight differences in the thermo-mechanical availability of the ideal and spark-ignition (SI) engine cycles. A cooperative single-cylinder research engine was used to measure the data required for availability analysis at equivalence ratios ranging between 0.83 and …

Transportation System And Its Association With Human Health – A Review And Modeling Approach, Fnu Zahed

Masters Theses

Transportation systems constitute of infrastructure, commute modes, land use and other policies. The purpose of transportation is to provide easy access to goods and services. While attaining this purpose, impacts of transportation on human health and well-being have been ignored to some extent. Recently, studies have begun analyzing the impact of transportation systems on quality of life and health disparities. While many studies have discussed the impact of the transportation system on individual factors from health, a very limited number of studies have focused on the impact of multiple factors associated with multiple morbidity and mortality forms. The focus of …

Optimal Design Of A Thermoelectric Cooling/Heating System For Car Seat Climate Control (Cscc), Abdulmunaem H. Elarusi

Masters Theses

In this work, optimal design of a thermoelectric device itself (element length, cross section area and number of thermoelements) applied in a car seat climate control (CSCC) is studied analytically using our newly developed optimization method. This method, which is based on the thermoelectric ideal equations along with dimensional analysis allows us to simultaneously obtain the best combination of the thermoelectric parameters in order to improve the performance of the thermoelectric device regarding the cooling/heating power and the coefficient of performance (COP). First, this method was implemented to investigate the optimal design of a readily existing air-to-air thermoelectric system. Then, …

The Effect Of Flexibility On Interaction Of Two Fibers Settling In Moderate Reynolds Numbers, Ahmed Alhasan

Masters Theses

The behavior of solid particles in a fluid has become an important topic. The need to improve our understanding of the mechanisms of fluid-particle interaction is the motivation for the present work. The characteristics of fibers suspensions depend on the many variables such as flexibility, Reynolds numbers, density and aspect ratio. The aim of this work is to probe effects of these variables on sedimentation behavior by using a fiber-level simulation technique. In this techniques, a D3Q15 model in a lattice Boltzmann equation with a Bhatnagar-Gross-Krook (BGK) approximation is used to simulate motion of fluids, where Navier-Stokes equations are solved …

Fluid Flow Characterization And In Silico Validation In A Rapid Prototyped Aortic Arch Model, Alexandra Mariel Knauer

Master's Theses

Transcatheter aortic heart valve replacement (TAVR) is a procedure to replace a failing aortic valve and is becoming the new standard of care for patients that are not candidates for open-heart surgery [2]. However, this minimally invasive technique has shown to cause ischemic brain lesions, or “silent infarcts”, in 90% of TAVR patients, which can increase the patient’s risk for stroke by two to four times in future years [3]. Claret Medical Inc., a medical device company, has developed a cerebral protection system that filters and captures embolic debris released during endovascular procedures, such as TAVR. This thesis utilized CT …

Autologous Protein Solution Exhibits Potential To Mitigate Osteoarthritis (Oa) Progression In A Human Explant Co-Culture Model, Kathleen Emily Steckbeck

All Theses

Osteoarthritis (OA) is a debilitating and painful disease that affects upwards of one in every eight adults1,2. OA influences the entire joint, but is traditionally characterized by cartilage degradation3. OA is a multifactorial disease with genetic, biological, and biochemical consideration, but there has been a recent shift in scientific opinion that the pathological progression of OA stems from an inflammatory milieu produced by the feed-forward progressive pathway as evidenced by simultaneous cartilage and synovium co-culture4–7. Autologous protein solution (APS) poses as an intriguing potential OA therapy by possessing a high anti-inflammatory and anabolic mediator concentration profile that could potentially mitigate …

Active Fault Tolerant Control For Vertical Tail Damaged Aircraft With Dissimilar Redundant Actuation System, Wang Jun, Wang Shaoping, Wang Xingjian, Shi Cun, Mileta M. Tomovic

Engineering Technology Faculty Publications

This paper proposes an active fault-tolerant control strategy for an aircraft with dissimilar redundant actuation system (DRAS) that has suffered from vertical tail damage. A damage degree coefficient based on the effective vertical tail area is introduced to parameterize the damaged flight dynamic model. The nonlinear relationship between the damage degree coefficient and the corresponding stability derivatives is considered. Furthermore, the performance degradation of new input channel with electro-hydrostatic actuator (EHA) is also taken into account in the damaged flight dynamic model. Based on the accurate damaged flight dynamic model, a composite method of linear quadratic regulator (LQR) integrating model …

Enhanced Thermal Conductance Of Polymer Composites Through Embedding Aligned Carbon Nanofibers, David S. Wood, Dale K. Hensley, Nicholas A. Roberts

Mechanical and Aerospace Engineering Faculty Publications

The focus of this work is to find a more efficient method of enhancing the thermal conduc-tance of polymer thin films. This work compares polymer thin films embedded with randomly oriented carbon nanotubes to those with vertically aligned carbon nanofibers. Thin films embedded with carbon nanofibers demonstrated a similar thermal conductance between 40–60 µm and a higher thermal con-ductance between 25–40 µm than films embedded with carbon nanotubes with similar volume fractions even though carbon nanotubes have a higher thermal conductivity than carbon nanofibers.

Repair Severed Nerve Connections Through A Multi-Branch Microchannel Scaffold To Control The Direction Of The Regenerated Nerve, Luis Enrique Castanuela Ramon

Theses and Dissertations

Damage to the peripheral nervous system may result in functional abnormalities due to disrupted nerve connections. Existing methods of repairing severed nerve connections in the peripheral nervous system have limitations and disadvantages such as a limited availability of donor nerves and a lack of control of the direction of nerve regeneration within nerve conduits. A handcrafted multi-branch microchannel scaffold improves upon the current methods of nerve repair by incorporating microchannels, which guide and accommodate the nerve regeneration to distal ends, allowing for the treatment of nerve injuries involving multiple branches with fewer surgeries. This scaffold is also made more accessible …

Biocompatible Microchannel Scaffold With Microwires For Recording Regenerative Peripheral Nerve Neural Spikes, Manisankar Chennamsetti

Theses and Dissertations

A new process for the fabrication of a microchannel scaffold with microwires for peripheral nerve applications is presented. This microchannel scaffold implemented between the ends of nerves, the axons of which regenerate through microchannel in scaffold and fixed microelectrodes. This device is entirely handcrafted using commercially available materials such as microwires, PDMS film, liquid PDMS, dental cement, and epoxy glue. This device was implemented in the a Lewis rat sciatic nerve to better analyze the electrical signals of regenerated axons. 64-electrode microchannel scaffolds were developed for both peripheral nerve interfacing and peripheral nerve regeneration. The microwires were used for recording …

Detecting Delamination In Carbon Fiber Composites Using Piezoresistive Nanocomposites, Sandeep Chava

Doctoral Dissertations and Master's Theses

Carbon fiber prepreg composites are utilized successfully as structural materials for different lightweight aerospace applications. Delamination is a critical failure mode in these composite materials. As composite plies separate from each other, the composite loses some of its ability for supporting expected loads. Therefore, detection of delamination at right time is a foremost significance. This study presents a new way for detecting delamination in composite plates using piezoresistive nanocomposites. This new procedure is setup and studied through both experimental and computational investigations. In this research, nanocomposites with 5% coarse graphene platelets are fabricated for detecting delamination. 8-ply carbon fiber prepreg …

Vision-Aided Navigation For Autonomous Vehicles Using Tracked Feature Points, Ahmed Saber Soliman Sayem

Doctoral Dissertations and Master's Theses

This thesis discusses the evaluation, implementation, and testing of several navigation algorithms and feature extraction algorithms using an inertial measurement unit (IMU) and an image capture device (camera) mounted on a ground robot and a quadrotor UAV. The vision-aided navigation algorithms are implemented on data-collected from sensors on an unmanned ground vehicle and a quadrotor, and the results are validated by comparison with GPS data. The thesis investigates sensor fusion techniques for integrating measured IMU data with information extracted from image processing algorithms in order to provide accurate vehicle state estimation. This image-based information takes the forms of features, such …

Visualizations Of Travel Time Performance Based On Vehicle Re-Identification Data, Stanley E. Young, Elham Sharifi, Christopher M. Day, Darcy M. Bullock

Lyles School of Civil Engineering Faculty Publications

This paper provides a visual reference of the breadth of arterial performance phenomena based on travel time measures obtained from reidentification technology that has proliferated in the past 5 years. These graphical performance measures are revealed through overlay charts and statistical distribution as revealed through cumulative frequency diagrams (CFDs). With overlays of vehicle travel times from multiple days, dominant traffic patterns over a 24-h period are reinforced and reveal the traffic behavior induced primarily by the operation of traffic control at signalized intersections. A cumulative distribution function in the statistical literature provides a method for comparing traffic patterns from various …

Material Selection And Testing For A Radiation Therapy Catheter, Philip James Wadlow

Master's Theses

Three different polymers (a high-density polymer and two other polymers) were tested for use as an x-ray catheter in a radiation therapy application. This report describes the testing of these three materials to determine which material is the best option for a long use catheter. Tests included tensile, simulated clinical life, and other tests. Some testing was performed using nitrogen and an industrial coolant. Testing revealed significant non-circularities for some catheters. With increasing pressure, the circularity of these catheters increased. The tensile tests were performed on samples with varying doses of radiation. Tensile testing showed significant decreases in ultimate tensile …

Elevational And Seasonal Patterns In Methylmercury Production Across The Montane Landscape Of Whiteface Mountain In The Adirondack Region Of New York, Jacqueline R. Gerson

Dissertations - ALL

Global mercury contamination results from direct primary atmospheric and secondary legacy emissions, which can be deposited to ecosystems, converted to methylmercury, and bioaccumulated along food chains. I examined soil samples collected across an elevational gradient on Whiteface Mountain in the Adirondack region of New York State to determine spatial patterns in methylmercury concentrations across a forested montane landscape. I found that soil methylmercury concentrations were highest in the mid-elevation coniferous zone (0.39 ± 0.07 ng/g) compared to the alpine (0.28 ± 0.04 ng/g) and deciduous zones (0.17 ± 0.02 ng/g), while the percent mercury as methylmercury in soils decreased linearly …

On Distributed And Acoustic Sensing For Situational Awareness, Fangrong Peng

Dissertations - ALL

Recent advances in electronics enable the development of small-sized, low-cost, low-power, multi-functional sensor nodes that possess local processing capability as well as to work collaboratively through communications. They are able to sense, collect, and process data from the surrounding environment locally. Collaboration among the nodes are enabled due to their integrated communication capability. Such a system, generally referred to as sensor networks are widely used in various of areas, such as environmental monitoring, asset tracking, indoor navigation, etc.

This thesis consists of two separate applications of such mobile sensors. In this first part, we study decentralized inference problems with dependent …

Cufa: A More Formal Definition For Digital Forensic Artifacts, Vikram S. Harichandran, Daniel Walnycky, Ibrahim Baggili, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

The term “artifact” currently does not have a formal definition within the domain of cyber/ digital forensics, resulting in a lack of standardized reporting, linguistic understanding between professionals, and efficiency. In this paper we propose a new definition based on a survey we conducted, literature usage, prior definitions of the word itself, and similarities with archival science. This definition includes required fields that all artifacts must have and encompasses the notion of curation. Thus, we propose using a new term e curated forensic artifact (CuFA) e to address items which have been cleared for entry into a CuFA database (one …

Deleting Collected Digital Evidence By Exploiting A Widely Adopted Hardware Write Blocker, Christopher S. Meffert, Ibrahim Baggili, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

In this primary work we call for the importance of integrating security testing into the process of testing digital forensic tools. We postulate that digital forensic tools are increasing in features (such as network imaging), becoming networkable, and are being proposed as forensic cloud services. This raises the need for testing the security of these tools, especially since digital evidence integrity is of paramount importance. At the time of conducting this work, little to no published anti-forensic research had focused on attacks against the forensic tools/process.We used the TD3, a popular, validated, touch screen disk duplicator and hardware write blocker …

Comparing Efficacy Of Different Dynamic Models For Control Of Underdamped, Antagonistic, Pneumatically Actuated Soft Robots, Morgan Thomas Gillespie

Theses and Dissertations

Research in soft robot hardware has led to the development of platforms that allow for safer performance when working in uncertain or dynamic environments. The potential of these platforms is limited by the lack of proper dynamic models to describe or controllers to operate them. A common difficulty associated with these soft robots is a representation for torque, the common electromechanical relation seen in motors does not apply. In this thesis, several different torque models are presented and used to construct linear state-space models. The control limitations on soft robots are induced by natural compliance inherent to the hardware. This …

Catalytic Pyrolysis Of Poly Vinyl Chloride As A Viable Way Of Waste Management, Randy Santos, Foster A. Agblevor

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The main purpose of this investigation is to achieve the dechlorination and cracking of PVC producing a low chlorinated oil using a single step process; finding and using a suitable adsorbent that captures the chlorine released in the decomposition of the Poly Vinyl Chloride in the solid phase; then use the adsorbent to enhance red mud chlorine absorption activity. Find an alternative viable use for the waste PVC and red mud that will reduce landfilling. Calcium Hydroxide was selected as the main chlorine adsorbent since it captured 75% chlorine in the solid phase. The calcium hydroxide was mixed with red …

Contact Radius And Insulator-Metal Transition In Films Comprised Of Touching Semiconductor Nanocrystals, Deanna M. Lanigan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nanocrystal assemblies are being explored for a number of optoelectronic applications such as transparent conductors, photovoltaic solar cells, and electrochromic windows. Majority carrier transport is important for these applications, yet it remains relatively poorly understood in films comprised of touching nanocrystals. Specifically, the underlying structural parameters expected to determine the transport mechanism have not been fully elucidated. In this report, we demonstrate experimentally that the contact radius, between touching heavily doped ZnO nanocrystals, controls the electron transport mechanism. Spherical nanocrystals are considered, which are connected by a circular area. The radius of this circular area is the contact radius. For …