Engineering Commons^™

Comparison Of Mixed-Mode S-Parameters In Weak And Strong Coupled Differential Pairs, Marina Koledintseva, Tracey Vincent

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, it is studied how the rate of coupling (weak vs. strong) in edge-coupled differential transmission lines on a printed circuit board (PCB) affects frequency behavior of mixed-mode S-parameters. This is important for signal integrity (SI), and also may be useful from electromagnetic compatibility (EMC) point of view, since the enhancement of mode conversion (from common-mode to differential mode, and vice versa) may result in common-mode noise in high-speed digital electronics. Slightly imbalanced in length microstrip and strip line differential pairs are considered. The study is done using full-wave numerical electromagnetic simulations. Various technological features are modeled in …

Global Adjoint Sensitivity Analysis Of Coupled Coils Using Parameterized Model Order Reduction, Luca De Camillis, Giulio Antonini, Francesco Ferranti, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a parameterized model order reduction technique for efficient global sensitivity analysis of coupled coils. It is based on the use of parameterized models for the electromagnetic matrices and the Krylov matrices of the original and corresponding adjoint systems, and congruence transformations. Numerical results confirm the efficiency and accuracy of the proposed method for global sensitivity analysis over the complete design space of interest.

Using Spatialisation To Support Exploratory Search Behaviour, Clement Roux

Dissertations

Information-seekers traditionally interact with digital content through keyword-based search interfaces displaying results in list views. Well-defined lookup search tasks are performed brilliantly with these interfaces, enabling users to find relevant information and develop a relative understanding of the underlying information space. However, it is feasible to suggest that ill-defined and abstract search tasks could be better supported with a different interface that could allow the user to explore a library’s content and develop an appropriate mental model of the information space. One such approach is based on the use of visualisation, an approach to data analysis that aims to reduce …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• CEIT 2016-17 Undergraduate Research Awards available
• CEIT 2016-17 Faculty Research Seed Grants available

A Regression Study Of Salary Determinants In Indian Job Markets For Entry Level Engineering Graduates, Rajveer Singh

Dissertations

The economic liberalisation of Indian markets in early 90s boosted the economic growth of the nation in various sectors over the next two decades. One such sector that has seen a massive growth in this time is Information Technology (IT). The IT industry has played a very crucial role in transforming India from a slow moving economy to one of the largest exporters of IT services. This growth created a huge demand in the labour markets for skilled labour, which in turn made engineering one of the top choices of study after high school over the years. In addition, the …

Investigating The Impact Of Unsupervised Feature-Extraction From Multi-Wavelength Image Data For Photometric Classification Of Stars, Galaxies And Qsos, Annika Lindh

Dissertations

This thesis reviews the current state of photometric classification in Astronomy and identifies two main gaps: a dependence on handcrafted rules, and a lack of interpretability in the more successful classifiers. To address this, Deep Learning and Computer Vision were used to create a more interpretable model, using unsupervised training to reduce human bias.

The main contribution is the investigation into the impact of using unsupervised feature-extraction from multi-wavelength image data for the classification task. The feature-extraction is achieved by implementing an unsupervised Deep Belief Network to extract lower-dimensionality features from the multi-wavelength image data captured by the Sloan Digital …

A Full Wave Conductor Modeling Using Augmented Electric Field Integral Equation, Tian Xia, Hui Gan, Michael Wei, Qin Liu, Lijun Jiang, Weng Cho Chew, Henning Braunisch, Kemal Aygun, Zhiguo Qian, Alaeddin Aydiner

Electrical and Computer Engineering Faculty Research & Creative Works

A numerical full wave solver is proposed to solve conductor problems in electromagnetics. This method is an extension of the dielectric augmented electric field integral equation (D-AEFIE). Using this method, conductors, from lowly lossy to highly lossy, can be rigorously modeled to capture the conductive losses. Broadband stability can be achieved, thanks to the introduction of the augmentation technique. This paper demonstrates the formulation of this method. A simple and effective preconditioner is introduced to accelerate the convergence. A novel integration scheme is adopted to accurately capture the losses inside the conductor. Finally some numerical examples are shown to support …

Coupling Dgtd And Behavioral Macromodel For Transient Heterogeneous Electromagnetic Simulations, Huan Huan Zhang, Li (Lijun) Jun Jiang, He Ming Yao, Yu Zhang

Electrical and Computer Engineering Faculty Research & Creative Works

A novel transient field-circuit cosimulation method based on the discontinuous Galerkin time domain (DGTD) method and circuit behaviour macromodels for heterogeneous electromagnetics such as EMC problems is proposed. The traditional field-circuit simulation method needs to know the detail of the circuits, which cannot handle problems with unknown systems due to IP protections. To overcome this problem, the proposed method utilizes the artificial neural network (ANN) to create trainable behavioral macromodels of the unknown circuits based on the port currents and port voltages. The obtained macromodel is then coupled with DGTD that describes the behavior of electromagnetic subsystem to form equations …

Routing Algorithm With Uneven Clustering For Energy Heterogeneous Wireless Sensor Networks, Ying Zhang, Wei Xiong, Dezhi Han, Wei Chen, Jun Wang

Computer Science Faculty Research

Aiming at the “hotspots” problem in energy heterogeneous wireless sensor networks, a routing algorithm of heterogeneous sensor network with multilevel energies based on uneven clustering is proposed. In this algorithm, the energy heterogeneity of the nodes is fully reflected in the mechanism of cluster-heads’ election. It optimizes the competition radius of the cluster-heads according to the residual energy of the nodes. This kind of uneven clustering prolongs the lifetime of the cluster-heads with lower residual energies or near the sink nodes. In data transmission stage, the hybrid multihop transmission mode is adopted, and the next-hop routing election fully takes account …

A Fault-Tolerant T-Type Multilevel Inverter Topology With Soft-Switching Capability Based On Si And Sic Hybrid Phase Legs, Jiangbiao He, Nathan Weise, Ramin Katebi, Lixiang Wei, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

The performance of a novel three-phase four-leg fault-tolerant T-Type inverter topology is presented in this paper, which significantly improves the inverter's fault-tolerant capability regarding device switch faults. In this new modular inverter topology, only the redundant leg is composed of Silicon Carbide (SiC) power devices and all other phase legs are constituted by Silicon (Si) devices. The addition of the redundant leg, not only provides fault-tolerant solution to switch faults that could occur in the T-Type inverter, but also can share load current with other phase legs. Moreover, quasi zero-voltage switching (ZVS) and zero-current switching (ZCS) in the Si Insulated-Gate …

An On-Line Diagnostic Method For Open-Circuit Switch Faults In Npc Multilevel Converters, Jiangbiao He, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

On-line condition monitoring is of paramount importance for multilevel converters used in safety-critical applications. A novel on-line diagnostic method for detecting open-circuit switch faults in neutral-point-clamped (NPC) multilevel converters is introduced in this paper. The principle of this method is based on monitoring the abnormal variation of the dc-bus neutral-point current in combination with the existing information on instantaneous switching states and phase currents. Advantages of this method include simpler implementation and faster detection speed compared to other existing diagnostic methods in the literature. In this method, only one additional current sensor is required for measuring the dc-bus neutral-point current, …

Life Cycle Assessment Of Non-Alcoholic Single-Serve Polyethylene Terephthalate Beverage Bottles In The State Of California, Dongho Kang, Rafael Auras, Jay Singh

Industrial Technology and Packaging

The aim of this study was to evaluate the environmental burden of non-alcoholic single serving size polyethylene terephthalate beverage bottle systems in the state of California through a life cycle assessment model. A mass flow of polyethylene terephthalate beverage bottle in the U.S., and the state of California is drawn as a Sankey diagram. The life cycle assessment model is designed with five main sections; material production, polyethylene terephthalate bottle production, waste management, environmental benefit, and transportation. The scope is cradle-to-grave with a representative functional unit as the amount of polyethylene terephthalate necessary to deliver 1000 L of beverage, specifically …

Creep And Recovery Behavior Of Polymeric And Chemically Treated Asphalt Binders, Mohammed Ziaur Rahaman

Student Theses and Dissertations

For quality assurance and quality control purposes, suppliers and users of asphalt binders follow the widely used dynamic shear rheometer (DSR) test method (AASHTO T 315) to capture viscoelastic properties of polymer-modified binders (PMBs), warm mix asphalt (WMA)- and reclaimed asphalt pavement (RAP)- modified binders even though it is designed for unmodified asphalt binders. AASHTO T 315 is inadequate to characterize the aforementioned binders because of the relatively small impact of the phase angle and strain levels on the rutting and fatigue factors, respectively. The recently balloted multiple stress creep recovery (MSCR) test (AASHTO T 350) results can better relate …

Pace, Clint And Linda Pace (Fa 879), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 879. Project titled: “Water-powered Mills in Warren County, Kentucky.” Includes history of water run mill sites in Warren County, Kentucky, mill terms, and survey sheets with brief descriptions of mills. Sheets include a brief description, informant’s name, and an illustration of the water mill.

Engineering And Perception, Maribel Vazquez

Open Educational Resources

An introductory seminar to High School and Freshman-Level Undergraduates that describes how several Biomedical Engineering innovations have been motivated by our senses of sight, sound, smell, taste and touch.

Mechanical Stimulation Increases Knee Meniscus Gene Rna-Level Expression In Adipose-Derived Stromal Cells, Elizabeth M. Meier, Bin Wu, Aamir Siddiqui, Donna G. Tepper, Michael T. Longaker, Mai T. Lam

Biomedical Engineering Faculty Research Publications

Background: Efforts have been made to engineer knee meniscus tissue for injury repair, yet most attempts have been unsuccessful. Creating a cell source that resembles the complex, heterogeneous phenotype of the meniscus cell remains difficult. Stem cell differentiation has been investigated, mainly using bone marrow mesenchymal cells and biochemical means for differentiation, resulting in no solution. Mechanical stimulation has been investigated to an extent with no conclusion. Here, we explore the potential for and effectiveness of mechanical stimulation to induce the meniscal phenotype in adipose-derived stromal cells.

Methods: Human adipose-derived stromal cells were chosen for their fibrogenic nature and conduciveness …

An Exploration Of The Impact Of Animal Agriculture On Human Sustainable Development Index And The Child Health Indicator, Hithesan Pandian

Dissertations

Several studies have shown that animal agriculture is one of the major contributors to climate change due to greenhouse gas emissions, deforestation, land degradation, freshwater shortages, general environmental pollution and world hunger. Apart from this, meat consumption is strongly associated with certain fatal health conditions such as cancer, cardiovascular disease and diabetes (Wu, 2014). Although meat production and export could be economically beneficial in the short run, it could lead to over-exploitation of natural resources and in turn the destruction of the environment in the long run. Hence, it is essential for the leaders of a nation to make smart …

Predictive Modeling Of A Paradigm Mechanical Cooling Tower Model: Ii. Optimal Best-Estimate Results With Reduced Predicted Uncertainties, Ruixian Fang, Dan Gabriel Cacuci, Madalina Badea

Faculty Publications

This work uses the adjoint sensitivity model of the counter-flow cooling tower derived in the accompanying PART I to obtain the expressions and relative numerical rankings of the sensitivities, to all model parameters, of the following model responses: (i) outlet air temperature; (ii) outlet water temperature; (iii) outlet water mass flow rate; and (iv) air outlet relative humidity. These sensitivities are subsequently used within the “predictive modeling for coupled multi-physics systems” (PM_CMPS) methodology to obtain explicit formulas for the predicted optimal nominal values for the model responses and parameters, along with reduced predicted standard deviations for the predicted model parameters …

Environmental Implications Of Consumer Preferences And Policy Incentives For Plug-In Vehicles In China And The U.S., John Helveston

Link Foundation Energy Fellowship Reports

China’s State Council has linked this vision to its economic development plans, which emphasize industrial upgrading to higher technologies and higher value added roles in global production chains (Howell et al., 2014; State Council, 2012). Given this context, this project comprises the last two of my three-paper Ph.D. thesis, which assesses how characteristics of China’s domestic environment, including consumer preferences, national and local institutions, market characteristics, and policies, are associated with the development and adoption of PEVs in China.

Partial Oxidation Of Surrogate Jet-A Fuel Over Sio2 Supported Moo2, Shreya Shah, Oscar G. Marin-Flores, Chinnathambi Karthik, M. Grant Norton, Su Ha

Materials Science and Engineering Faculty Publications and Presentations

A SiO₂-supported MoO₂ nanoparticle catalyst was synthesized by a sol-gel method and tested as catalytic material for the partial oxidation of n-dodecane. MoO₂ nanoparticles supported on SiO₂ are °C, which is a typical reforming temperature for n-dodecane. The formation of Mo O Si bonds at the interface between MoO₂ nanoparticles and SiO₂ support appear to be responsible for the enhanced stability to sintering displayed by the nanoparticles. As a result of this particle size stabilization, SiO₂ supported MoO₂ nanoparticles show an improved reforming activity in terms of syngas generation …

A Global Catalogue Of Large So < Inf> 2 Sources And Emissions Derived From The Ozone Monitoring Instrument, Vitali E. Fioletov, Chris A. Mclinden, Nickolay Krotkov, Can Li, Joanna Joiner, Nicolas Theys, S. Carn, Mike D. Moran

Michigan Tech Publications, Part 1

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor processed with the new principal component analysis (PCA) algorithm were used to detect large point emission sources or clusters of sources. The total of 491 continuously emitting point sources releasing from about 30 kt yr-1 to more than 4000 kt yr-1 of SO2 per year have been identified and grouped by country and by primary source origin: volcanoes (76 sources); power plants (297); smelters (53); and sources related to the oil and gas industry (65). The sources were identified using different methods, including through OMI measurements themselves applied …

Compositionally Graded Bulk Heterojunction Devices And Methods Of Manufacturing The Same, Jinsong Huang, Zhengguo Xiao

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods are described to form compositionally graded BHJ structures utilizing solvent-fluxing techniques. In implementations, the systems and methods described herein involve a high boiling point additive, a solution of a polymer donor and an acceptor, a substrate material, a working solvent, and a flux solvent for formation of compositionally graded BHJ structures.

Absolute Positioning Using The Earth's Magnetic Anomaly Field, Aaron J. Canciani

Theses and Dissertations

Achieving worldwide alternatives to GPS is a challenging engineering problem. Current GPS alternatives often suffer from limitations such as where and when the systems can operate. Navigation using the Earth's magnetic anomaly field, which is globally available at all times, shows promise to overcome many of these limitations. We present a navigation filter which uses the Earth's magnetic anomaly field as a navigation signal to aid an inertial navigation system (INS) in an aircraft. The filter utilizes highly-accurate optically pumped cesium (OPC) magnetometers to make scalar measurements of the Earth's magnetic field and compare them to a map using a …

Degradation Of Carbon Fiber Reinforced Polymer And Graphite By Laser Heating, Nicholas C. Herr

Theses and Dissertations

The availability of high power, diode pumped solid state and fiber lasers at powers 10 kW and shorter wavelengths (1.07 µm) has invigorated the development of tactical laser weapons. This shift to tactical missions greatly increases the variety of potential targets including carbon fiber reinforced polymers and related materials. The complexity of laser-material interactions has driven a historical reliance on live-fire testing and empirical models, but this becomes more difficult as the number of target materials grow. This dissertation combines thermal imagery and existing thermal models of the fire response of composite materials to develop a hybrid modeling approach of …

Conceptual Architecture To Measure The Effects Of Subauroral Polarization Streams On Radar Operations, Shayla K. Redmond

Theses and Dissertations

This thesis provides the initial conceptual development of taking into account subauroral polarization streams when preparing for a radar operation. The DoDAF views created to portray the architecture consisted of operational, capabilities, data and information, and finally system views to ensure consistency and realistic outcomes. OV-2 was the significant view because it set the baseline for required actions necessary for the proposed results the Flow Integration of Ionospheric Activity and Radar Evaluation (FIIARE) system would produce. FIIARE is a computer based system concept that performs consolidations and produce predictions using algorithms from the International Reference Ionosphere (IRI). The data portrayed …

Improving Real-World Performance Of Vision Aided Navigation In A Flight Environment, Donald T. Venable

Theses and Dissertations

The motivation of this research is to fuse information from an airborne imaging sensor with information extracted from satellite imagery in order to provide accurate position when GPS is unavailable for an extended duration. A corpus of existing geo-referenced satellite imagery is used to create a key point database. A novel algorithm for recovering coarse pose using by comparing key points extracted from the airborne imagery to the reference database is developed. This coarse position is used to bootstrap a local-area geo-registration algorithm, which provides GPS-level position estimates. This research derives optimizations for existing local-area methods for operation in flight …

Applying Lean To The Ac-130 Maintenance Process For The Royal Saudi Air Force, Fisal A. Alzahrani

Theses and Dissertations

The ideas expressed in this research come from the researchers experiences working in the AC-130 maintenance squadron in the Royal Saudi Air Force. The AC-130 maintenance process is not currently being used as effectively as it could be to make AC-130 fully mission capable. That can be done by improving communication, reducing distances needed to move or transport anything during the maintenance process and by efficient use of the available qualified workforces, tools and equipment. Consideration is given to applying an existing management technique to the Royal Saudi Air Forces AC-130 Maintenance Squadrons. The selected technique is the Lean management …

The Impact Of Satellite Sensor Viewing Geometry On Time-Series Analysis Of Volcanic Emissions, Verity Flower, Simon A. Carn, Robert Wright

Michigan Tech Publications, Part 1

Time-series analysis techniques are being increasingly used to process satellite observations of volcanic gas emissions and heat flux, with the aim of identifying cyclic behaviour that could inform hazard assessment or elucidate volcanic processes. However, it can be difficult to distinguish cyclic variations due to geophysical processes from those that are artefacts of the observation technique. Here, we conduct a comprehensive investigation into the origin of cyclicity in volcanic observations by analysing daily, global satellite measurements of volcanic SO2 loading by the Ozone Monitoring Instrument (OMI) and thermal infrared anomalies detected by the Moderate Resolution Imaging Spectroradiometer (MODIS). We use …

Physical Layer Defenses Against Primary User Emulation Attacks, Joan A. Betances

Theses and Dissertations

Cognitive Radio (CR) is a promising technology that works by detecting unused parts of the spectrum and automatically reconfiguring the communication system's parameters in order to operate in the available communication channels while minimizing interference. CR enables efficient use of the Radio Frequency (RF) spectrum by generating waveforms that can coexist with existing users in licensed spectrum bands. Spectrum sensing is one of the most important components of CR systems because it provides awareness of its operating environment, as well as detecting the presence of primary (licensed) users of the spectrum.

Mechanical Properties And Fatigue Behavior Of Unitized Composite Airframe Structures At Elevated Temperature, Mohamed Noomen

Theses and Dissertations

The tension-tension fatigue behavior of a newly developed unitized composite material system was investigated. The unitized composite consisted of a polymer matrix composite (PMC) co-cured with a ceramic matrix composite (CMC). The PMC portion consisted of an NRPE high-temperature polyimide matrix reinforced with carbon fibers woven in an eight harness satin weave (8HSW). The CMC layer is a single-ply non-crimp 3D orthogonal weave composite consisting of ceramic matrix reinforced with glass fibers. In order to assess the performance and suitability of this composite for use in aerospace components designed to contain high-temperature environments, mechanical tests were performed under temperature conditions …