Engineering Commons^™

Study Of Spatiotemporal Rainfall Structure And Optimized Local Radar Rainfall Application To Urban Watershed, Louisville, Kentucky, 2010-2014., Jin-Young Hyun

Electronic Theses and Dissertations

In urban areas, a prevalence of combined sewer systems (CSS) exist that carry both storm water runoff and sanitary sewer flows in a single pipe, these system are considered combined sewers. In the absence of rainfall-runoff most of these systems function adequately, however CSS capacity is typically inadequate to carry peak stormwater runoff volume. In order to minimize sewage flooding into streets and backups into homes and businesses, most CSSs (as well as separate sanitary sewer systems) are designed to overflow into surface waters such as streams and rivers, lakes and seas. This occurrence is considered a combined sewer overflow …

Scalable Production And Applications Of Metal Oxide Nanowires., Tu Quang Nguyen

Electronic Theses and Dissertations

Metal oxide nanowires are materials of interest in number of applications such as lithium ion batteries, solar cells, catalyst support, and gas sensing due to their unique charge transport properties and short diffusion length scales. To incorporate nanowires for any applications, one would need hundreds of grams to kilograms of these nanowires. However, state-of-the-art methods for producing metal oxide nanowires are limited to producing only milligrams to a gram in a batch. Hence, there is a need to develop scalable and cost effective processes and reactors to address this challenge. Direct gas phase oxidation of zinc metal powders using a …

Single Carrier Frequency Domain Equalization And Energy Efficiency Optimization For Mimo Cognitive Radio., Xiaohui Zhang

Electronic Theses and Dissertations

This dissertation studies two separate topics in wireless communication systems. One topic focuses on the Single Carrier Frequency Domain Equalization (SC-FDE), which is a promising technique to mitigate the multipath effect in the broadband wireless communication. Another topic targets on the energy efficiency optimization in a multiple input multiple output (MIMO) cognitive radio network. For SC-FDE, the conventional linear receivers suffer from the noise amplification in deep fading channel. To overcome this, a fractional spaced frequency domain (FSFD) receiver based on frequency domain oversampling (FDO) is proposed for SC-FDE to improve the performance of the linear receiver under deep fading …

Mechanism Of Interaction Of Peptide Modified Nanoparticles With Porphyromonas Gingivalis., Ankita Jain

Electronic Theses and Dissertations

Studies suggest that P. gingivalis functions as a keystone pathogen and interacts with primary colonizers in the supragingival biofilm such as S. gordonii. This interaction contributes to the initial colonization of the oral cavity by P. gingivalis and thus represents a potential target for therapeutic intervention. We have identified a peptide (BAR) derived from the streptococcal SspB protein that functions to inhibit P. gingivalis adherence to S. gordonii. In addition, we showed that nanoparticles (NPs) functionalized with BAR inhibit this interaction more potently than free soluble peptide, possibly by promoting interaction with P. gingivalis at higher valency than …

Reflectivity Of Light Emitting Diodes (Led) And Incandescent Lights On Concrete And Asphalt Pavements., Jeremy Elliott Rice

Electronic Theses and Dissertations

The purpose of this study is to investigate the reflectivity of light on concrete and asphalt pavement systems. In 1983, the Illuminating Engineering Society (IES) published the first recommended practice (RP-8) for the design of roadway and parking lot lighting. This design method implemented empirically tested factors which were defined as the “reduced luminance coefficients” or the R-Tables. The R-Tables are essential for proper design of light pole installation dimensions, required power, and the distribution of light. The originally tested pavements are not necessarily representative of modern pavement materials used today. Moreover, recent Light Emitting Diodes (LED) are a relatively …

Psychophysiological Analysis Of A Pedagogical Agent And Robotic Peer For Individuals With Autism Spectrum Disorders., Mohammad Nasser Saadatzi

Electronic Theses and Dissertations

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by ongoing problems in social interaction and communication, and engagement in repetitive behaviors. According to Centers for Disease Control and Prevention, an estimated 1 in 68 children in the United States has ASD. Mounting evidence shows that many of these individuals display an interest in social interaction with computers and robots and, in general, feel comfortable spending time in such environments. It is known that the subtlety and unpredictability of people’s social behavior are intimidating and confusing for many individuals with ASD. Computerized learning environments and robots, however, prepare a predictable, …

Strategies And Techniques For Fabricating Mems Bistable Thermal Actuators., Dilan Ratnayake

Electronic Theses and Dissertations

Bistable elements are beginning to appear in the field of MEMS as they allow engineers to design sensors and actuators which require no electrical power and possess mechanical memory. This research focuses on the development of novel strategies and techniques for fabricating MEMS bistable structures to serve as no electrical power thermal actuators. Two parallel strategies were explored for the design and fabrication of the critical bistable element. Both strategies involved an extensive material study on candidate thin film materials to determine their temperature coefficient of expansion and as-deposited internal stress properties. Materials investigated included titanium tungsten, Invar, silicon nitride …

An Integrated Economic Equilibrium Model For Electricity Markets., Swapna Pothabathula

Electronic Theses and Dissertations

The increasing energy challenges worldwide are forcing researchers to explore ways for energy systems that work more efficiently on their own and with each other. This thesis develops an integrated electricity market equilibrium model (EMEM) as a mixed complementarity problem (MCP). In particular, we first develop an equilibrium model to study an electricity market consisting of coal producers, electricity generation firms, natural gas producers, natural gas marketers, natural gas pipeline owners, natural gas consumers and electricity consumers. The equilibrium model not only captures a decentralized optimization for each player but considers the interaction amongst players. Second, we formulate the equilibrium …

Experimental Observation Of The Relationship Between The Pressure Drop And Flow Rate Of Radial Flow Through Porous Media., Matthew William Okruch

Electronic Theses and Dissertations

This research experimentally observed the relationship between pressure drop and flow rate for high velocity, radial flow through porous media. The criterion for what represents high velocity is a function of the Reynold’s number of the flow. Pressure drop – flow rate curves were developed by flowing air and water through the porous carbon block samples. Each sample’s permeability was calculated from on the air test results. Each sample’s porosity was determined through digital microscope image analysis. Darcy’s Law, the Forchheimer equation, and the Ergun equation were converted to the radial flow domain and compared to the experimental data. The …

Dual Role Of Sb Ions As Electron Traps And Hole Traps In Photorefractive Sn2P2S6 Crystals, Brant E. Kananen, Eric M. Golden, Sergey A. Basun, D. R. Evans, A. A. Grabar, I. M. Stoika, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton

Faculty Publications

Doping photorefractive single crystals of Sn₂P₂S₆ with antimony introduces both electron and hole traps. In as-grown crystals, Sb³⁺ (5s²) ions replace Sn²⁺ ions. These Sb³⁺ ions are either isolated (with no nearby perturbing defects) or they have a charge-compensating Sn²⁺ vacancy at a nearest-neighbor Sn site. When illuminated with 633 nm laser light, isolated Sb³⁺ ions trap electrons and become Sb²⁺ (5s²5p¹) ions. In contrast, Sb³⁺ ions with an adjacent Sn vacancy trap holes during illumination. The hole is primarily …

Bs News November/December

Building Services Engineering

No abstract provided.

Resource-Efficient Technology To Produce 4-Aminodiphenylamine, V.V. Bochkarev, L.S. Soroka, J.K. Bashkin

Chemistry & Biochemistry Faculty Works

No abstract provided.

Shear Wave Velocity And Its Anisotropy Of Polymer Modified High-Volume Class-F Fly Ash-Kaolinite Mixtures, X. Kang, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effects of polymers on the small-strain stiffness behavior of high-volume Class-F fly ash-kaolinite mixtures. The shear wave velocity (Vs) and its anisotropy of organically modified fly ash-kaolinite mixtures were evaluated using a self-developed floating wall type consolidometer bender element (BE) testing system. Both synthetic polymers [polyethylene oxide (PEO)] and biopolymers (xanthan gum and chitosan) were used to modify the stiffness of fly ash-kaolinite mixtures. Shear waves generated and received by bender elements were measured to quantify the small-strain stiffness of the organically modified fly ash-kaolinite mixtures in three orthogonal directions, i.e., vh, hv, and hh. The …

Experimental Characterization And Simulation Of Carbon Nanotube Strain Sensing Films, Nagendra Krishna Chaitanya Tummalapalli

Masters Theses

Carbon Nanotubes (CNTs) have excellent mechanical, electrical and electromechanical properties. These properties led to a lot of novel applications. Due to change in electrical properties under mechanical loading, these composites have potential applications in strain sensors, when these are fabricated as films. CNT-based films are commonly fabricated using different physical and chemical techniques based on the property requirements governing those applications. In this work, CNT films were prepared using wet chemical based methods and chemical vapor deposition techniques.

Plasma chemical vapor deposition using microwave power is used in the first method to deposit films on silicon substrates, using Nickel film …

Development Of Fully Printed And Flexible Strain, Pressure And Electrochemical Sensors, Dinesh Maddipatla

Masters Theses

In recent years, considerable research has been put into the development of printed electronics (PE) as well as the best ways to effectively and efficiently print electronic devices on flexible substrates. This thesis focuses majorly on the design and fabrication of novel flexible sensors using conventional printing processes.

Initially, a flexible printed strain gauge was fabricated successfully on a flexible paper substrate using flexography printing process. Silver (Ag) ink was printed on the paper substrate as metallization layer. The performance of the printed device was investigated by subjecting the strain gauge to a 3-point bend test, with a displacement of …

Optimization Methodology For Cvt Ratio Scheduling With Consideration Of Both Engine And Cvt Efficiency, Steven Beuerle

Masters Theses

A transmission ratio schedule is developed to optimize the fuel consumption for an automotive continuously variable transmission (CVT) connected to an internal combustion engine (ICE). Although the optimal operating line (OOL) generated from an engine brake specific fuel consumption (BSFC) map can be used to generate a CVT ratio schedule that yields maximum engine efficiency, it was found that OOL-based CVT ratio scheduling does not necessarily offer the best fuel economy because optimal CVT efficiency does not always correspond to OOL tracking. To develop a CVT ratio schedule that can offer the best fuel economy, a novel ratio-scheduling methodology is …

Analytical Modeling And Numerical Simulation Of A Thermoelectric Generator Including Contact Resistances, Shripad Dhoopagunta

Masters Theses

With increasing demand for energy harvesting systems, research has been conducted in different areas in which Thermoelectric Generators (TEG) find their way into the top of many available resources. Out of many energy harvesting systems available, TEGs are comparatively easier to study, to manufacture and also to comprehend while producing enough energy for applications they find use in. They are solid state devices, meaning; they do not have any moving parts and hence makes them durable. Most of the energy that goes out of the automobile as exhaust is reused to power the TEGs. In most of the works that’s …

Membrane Chromatography For Bioseparations: Ligand Design And Optimization, Zizhao Liu

Graduate Theses and Dissertations

Membrane chromatography, or membrane adsorber, represents an attractive alternative to conventional packed bed chromatography used in downstream processing. Membrane chromatography has many advantages, including high productivity, low buffer consumption and ease to scale up. This doctoral dissertation focuses on developing novel polymeric ligands for protein separations using membrane chromatography. Atom transfer radical polymerization (ATRP), known as a controlled radical polymerization technique, has been used to control the architecture of grafted polymeric ligands. The center theme of this dissertation is to develop new polymeric ligands and investigate how the polymer’s property (e.g. flexibility, hydrophobicity) and architecture (e.g. chain density, chain length) …

Flight Test Evaluation And Analysis Of The Wingbug: A Miniature Air Data Computer And Inertial Measurement Unit, Matthew Knight Rhoney

Theses and Dissertations

The prototype WingBug was an innovative concept by Straight & Level Technologies to measure airspeed, altitude, temperature, Euler angles, angular rates, and acceleration information. The unit was portable, self-powered, streamed data via WiFi to any tablet or smart phone in the cockpit, and cost less than $1000. It measured 8”x3”x3”, weighed 6 ounces, and used a GoPro mount to attach externally to any aircraft. This thesis covers results from the initial flight test program flown at the Florida Institute of Technology in 2016. The WingBug was flown on a Piper Warrior. Data from the WingBug were compared to “truth” data …

Role Of The Inner Shell Architecture On The Various Blinking States And Decay Dynamics Of Core-Shell And Core-Multishell Quantum Dots, Pooja Bajwa

Graduate Theses and Dissertations

Colloidal semiconductor nanocrystals (quantum dots, QDs) have received much attention in recent years due to their uniquely size-tunable properties leading to a number of promising applications. Some of their most popular applications include their use as fluorescent probes in biology, as electro-optical components and in photovoltaic devices. CdSe-based QDs are particularly important because of their ease of synthesis, high photoluminescence quantum yields (PL QYs) across the whole visible spectrum and their photostabilty. Shelling of core QDs is usually carried out to improve their optical properties, minimize outer environmental effects on their properties, and avoid toxic element exposure to the environment. …

Scaffold And Tissue Based Therapies To Improve Skeletal Muscle Regeneration After Volumetric Muscle Loss, Benjamin Kasukonis

Graduate Theses and Dissertations

Volumetric muscle loss (VML) is an injury to skeletal muscle characterized by a loss of more than 20% of a muscles volume. The combination of the bulk loss of tissue, transection and separation of myofibers proximal and distal to the injury, loss of innervation and blood supply, and the depletion of muscle progenitor cells results in permanent fibrosis and functional deficits due to loss of contractile tissue. Scaffolds, cells, and engineered constructs have been explored as potential therapeutic interventions to induce myogenesis at the site of a VML injury in animal models, in addition to limited clinical trials. This dissertation …

Just In Time Assembly (Jita) - A Run Time Interpretation Approach For Achieving Productivity Of Creating Custom Accelerators In Fpgas, Sen Ma

Graduate Theses and Dissertations

The reconfigurable computing community has yet to be successful in allowing programmers to access FPGAs through traditional software development flows. Existing barriers that prevent programmers from using FPGAs include: 1) knowledge of hardware programming models, 2) the need to work within the vendor specific CAD tools and hardware synthesis. This thesis presents a series of published papers that explore different aspects of a new approach being developed to remove the barriers and enable programmers to compile accelerators on next generation reconfigurable manycore architectures. The approach is entitled Just In Time Assembly (JITA) of hardware accelerators. The approach has been defined …

Measuring Nonlinear Properties Of Graphene Thin Films Using Z-Scan Technique, Thekrayat Hassan Al Abdulaal

Graduate Theses and Dissertations

The nonlinear studies of two-dimensional (2D) nanomaterials, specifically graphene, are very significant since graphene is finding its usefulness in handling the enormous heat in nanoscale high-density power electronics. Graphene has emerged to be a promising nanomaterial as an excellent heat spreader due to its high thermal conductivity. However, the experimental nonlinear study of graphene materials and their application in developing future optoelectronic devices demands for more developed research.

The research objective is first to build a precise, and sensitive technique to investigate and understand the thermal nonlinear properties, including nonlinear refractive index (n2), nonlinear absorption coefficient (β), and thermo-optic coefficient …

Si-Based Germanium-Tin (Gesn) Emitters For Short-Wave Infrared Optoelectronics, Seyed Amir Ghetmiri

Graduate Theses and Dissertations

Conventional integrated electronics have reached a physical limit, and their efficiency has been influenced by the generated heat in the high-density electronic packages. Integrated photonic circuits based on the highly developed Si complementary-metal-oxide-semiconductor (CMOS) infrastructure was proposed as a viable solution; however, Si-based emitters are the most challenging component for the monolithic integrated photonic circuits. The indirect bandgap of silicon and germanium is a bottleneck for the further development of photonic and optoelectronic integrated circuits.

The Ge1-xSnx alloy, a group IV material system compatible with Si CMOS technology, was suggested as a desirable material that theoretically exhibits a direct bandgap …

Investigation Of The Optical Properties Of Pbse/Pbx Nanocrystals For Photodetector Applications, Haley Ann Morris

Graduate Theses and Dissertations

Lead selenide and lead selenide/lead sulfide core/shell nanocrystals were investigated for use in near infrared photodetectors. A colloidal synthesis method was used for both the core and core/shell configurations. The lead sulfide shell was examined in order to mitigate oxidation of the nanoparticle surface. Absorbance and photoluminescence spectra were measured at room temperature and 77 K, respectively. Transmission electron microscopy images were also obtained to confirm crystallography and size. Bulk lead selenide was simulated in WIEN2k utilizing the linear-augmented plane wave method of solving density functional theory to better understand the electronic structure of PbSe. The crystal structure, electron density, …

Optimal Sensing And Transmission In Energy Harvesting Sensor Networks, Xianwen Wu

Graduate Theses and Dissertations

Sensor networks equipped with energy harvesting (EH) devices have attracted great attentions recently. Compared with conventional sensor networks powered by batteries, the energy harvesting abilities of the sensor nodes make sustainable and environment-friendly sensor networks possible. However, the random, scarce and non-uniform energy supply features also necessitate a completely different approach to energy management.

A typical EH wireless sensor node consists of an EH module that converts ambient energy to electrical energy, which is stored in a rechargeable battery, and will be used to power the sensing and transmission operations of the sensor. Therefore, both sensing and transmission are subject …

Design, Fabrication And Measurement Of A Plasmonic Enhanced Terahertz Photoconductive Antenna, Nathan Matthias Burford

Graduate Theses and Dissertations

Generation of broadband terahertz (THz) pulses from ultrafast photoconductive antennas (PCAs) is an attractive method for THz spectroscopy and imaging. This provides a wide frequency bandwidth (0.1-4 THz) as well as the straightforward recovery of both the magnitude and phase of the transmitted and/or reflected signals. The achieved output THz power is low, approximately a few microwatts. This is due to the poor conversion of the femtosecond laser used as the optical pump to useable current inside the antenna semiconducting material. The majority of THz power comes from the photocarriers generated within ~ 100 nm distance from the antenna electrodes. …

Growth Of Gesn And Gepb Alloy Films Using Thermal Evaporator, Hakimah Alahmed

Graduate Theses and Dissertations

Silicon is the most important semiconductor material used in microelectronic devices. As the number of transistors keep doubling every 24 months (Moore’s law), transistors continue scaling down in size, electrical interconnect is reaching its limits to keep up with the scaling down rate in integrated circuits. These limitations are related to interconnect density and power consumption. Hence, replacing electrical interconnect with optical interconnect on the chip or between chips has the ability to overcome these limitations. However, silicon has poor light emitting efficiency, and other substitutes such as III-V materials are not suitable due to high cost, lattice mismatch, and …

Photoluminescence Studies Of Amorphous Boron Carbide And Tungsten Diselenide Thin Films, David M. Allendorfer

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

For many years scientists and engineers have been researching semi-conducting materials for use in a broad array of electronic devices. With the growing demand for faster, smaller and more efficient electronics, new materials must be characterized and their properties quantified. The focus of this thesis is to develop a system to measure photoluminescence in opto-electronic materials. Photoluminescence measurements are important because it can give researchers valuable information about a material’s band structure. This thesis begins by presenting the carrier recombination mechanisms and how they apply to photoluminescence. A system was developed to measure photoluminescence spectroscopy. This system was tested with …

Vector Magneto-Optical Generalized Ellipsometry For Determining Magneto-Optical Properties Of Thin Films, Chad Briley

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Modern growth techniques allow for highly complex nano scale thin films to be created. These new films possess highly anisotropic properties structurally, optically, and magnetically that are significantly different from that of their bulk counterparts and must be accurately characterized in order to optimize desired properties for applications in next generation devices. Current magnetometry techniques focus on high symmetry characterization, namely in and out of the sample plane, and therefore do not possess the capabilities to fully explore these anisotropic properties without complicated setups and multiple sample manipulations. The author describes a setup that combines generalized ellipsometry with an octu-pole …