Engineering Commons^™

A Comparison Of Lysophosphatidylcholine And Crush Injury In A Rat Model Of Sciatic Nerve Regeneration, Ryan L. Wood, William G. Pitt, Scott C. Steffensen, Alonzo D. Cook

Faculty Publications

This study examined the effect of using lysophosphatidyl choline (LPC) in combination with a nerve crush injury on the healing rate of damaged left sciatic nerves in female rats. The rats were divided randomly into four groups: Control, LPC, Crush or Crush+ LPC. The Control group was the undamaged right sciatic nerve. The other groups were the damaged left sciatic nerve. The healing of the nerves was measured by monitoring gait, electrophysiological parameters: compound muscle action potential (CMAP) amplitudes and nerve conductance velocities (NCV); and morphological parameters: total fascicular area, total myelinated fiber counts, fiber densities, fiber diameters, and g-ratio. …

Pilot Source Study 2015: An Analysis Of Far Part 121 Pilots Hired After Public Law 111-216—Their Backgrounds And Subsequent Successes In Us Regional Airline Training And Operating Experience, Guy Smith, Elizabeth Bjerke, Maryjo Smith, Cody Christensen, Thomas Carney, Paul Craig, Mary Niemczyk

Journal of Aviation Technology and Engineering

This report is the second in a series entitled Pilot Source Study 2015. Public Law 111-216 (Airline Safety and Federal Aviation Administration Extension Act of 2010) and the subsequent FAA regulation changed pilot hiring for US air carriers operating under 14 CFR Part 121. The Pilot Source Study 2015 was designed to determine the effect of Public Law 111-216 on US regional airlines after its effective date, August 1, 2013. The study collected records for 6,734 FAR Part 121 regional airline pilots to determine the effect of pilots’ backgrounds on their performance in regional airline training and operations. A previous …

59th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 59th Conference on Senior Engineering Design Projects. The conference was held from 8:30 a.m. to 3:30 p.m.,Tuesday, December 6, 2016 at the College of Engineering and Applied Sciences on the Parkview Campus of Western Michigan University. The College of Engineering and Applied Sciences sponsored the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Invasive Species Impacts On Infrastructure, Invasive Species Advisory Committee

National Invasive Species Council

Executive Summary

Invasive species represent one of the most significant threats to ecosystems, human and animal health, infrastructure, the economy, and cultural resources. Because potentially invasive, non-native species typically enter the United States through ports of entry in urban environments, some of the first observable impacts may be to infrastructure, yet little is known about the economic costs associated with these impacts to the “built” environment. In addition, federal agencies currently lack the authority necessary to effectively prevent, eradicate, and control invasive species that impact the human-built environment. This lack of authority prevents rapid response to some of the most …

I-94 Advanced Bridge Replacement, Saleem Alsharari

Honors Theses

The Michigan Department of Transportation has always felt the need of improving and increasing the capacity of the most critical highway in the state of Michigan, I-94. Part of the improvement plan is to increase the capacity of a 6-mile segment along a corridor of I-94 from French Avenue to Trumbull Avenue which is in a suburban neighborhood of Detroit. There are eight bridges built in the 1950’s that need to be re-constructed for a capacity increase. Vehicular and non-motorized traffic must be accounted for in the design of these bridges. The project is intended to increase the service life …

Attitude Determination Control Testing System (Helmholtz Cage And Air Bearing), Nicolas Theoret

Honors Theses

The WALI team at Western Michigan University requested a test environment to validate their CubeSat’s de-tumbling control system and hardware. The test environment required a Helmholtz cage and spherical air bearing. The Helmholtz cage provides an adjustable magnetic field to simulate low earth orbit; the spherical air bearing simulates the friction free environment the CubeSat will experience in space. In conjunction, the two components create an adjustable system that simulates a satellite in low earth orbit.

Cubesat Adcs Validation And Testing Apparatus, Jacob Stevens

Honors Theses

The WALI team at Western Michigan University requested a test environment to validate their CubeSat’s de-tumbling control system and hardware. The test environment required a Helmholtz cage and spherical air bearing. The Helmholtz cage provides an adjustable magnetic field to simulate low earth orbit; the spherical air bearing simulates the friction free environment the CubeSat will experience in space. In conjunction, the two components create an adjustable system that simulates a satellite in low earth orbit.

Total Bridge Replacement Of M-13 Over Cheboyganing Creek, Daniel Burns

Honors Theses

The Michigan Department of Transportation sought a proposal consisting of design and construction engineering services for the total bridge replacement of M-13 over Cheboyganing Creek. The M-13 Bridge Project is located on M-13 over Cheboyganing Creek on the Saginaw River in Portsmouth Township, Bay County, Michigan.

Several components of the existing bridge have been rated in poor or serious condition on the National Bridge Inventory rating scale. A total bridge replacement is required and aligns with MDOT strategies to address critical infrastructure needs in the state as well as the Bay Region's five-year plan for managing bridge and culvert infrastructure. …

Investigating The Impact Of Unsupervised Feature-Extraction From Multi-Wavelength Image Data For Photometric Classification Of Stars, Galaxies And Qsos, Annika Lindh

Conference papers

Accurate classification of astronomical objects currently relies on spectroscopic data. Acquiring this data is time-consuming and expensive compared to photometric data. Hence, improving the accuracy of photometric classification could lead to far better coverage and faster classification pipelines. This paper investigates the benefit of using unsupervised feature-extraction from multi-wavelength image data for photometric classification of stars, galaxies and QSOs. An unsupervised Deep Belief Network is used, giving the model a higher level of interpretability thanks to its generative nature and layer-wise training. A Random Forest classifier is used to measure the contribution of the novel features compared to a set …

Advances Of Cone Penetration Testing In Earthquake Engineering Applications, Robb E.S. Moss, R. Moffat

Civil and Environmental Engineering

The Cone Penetration Test (CPT), because of its precision, accuracy, and utility has been increasingly used in earthquake engineering applications in the last decade. This paper provides a brief survey of recent advances in applying the CPT to; liquefaction triggering, post-liquefaction deformations, cyclic failure of clays, dynamic slope stability, and seismic site response. In granular soils the continuous CPT measurements of tip and sleeve resistance are well correlated with the engineering properties of relative density and friction angle. In clay soils the CPT tip resistance is directly proportional to the undrained shear strength. CPT measurements are ideal for weak or …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• 2016 Newsletter – Dr. Mike Jackson

Energy Optimization And Fuel Economy Investigation Of A Series Hybrid Electric Vehicle Integrated With Diesel/Rcci Engines, Ali Solouk, Mahdi Shahbakhti

Michigan Tech Publications, Part 1

Among different types of low temperature combustion (LTC) regimes, eactively controlled compression ignition (RCCI) has received a lot of attention as a promising advanced combustion engine technology with high indicated thermal efficiency and low nitrogen oxides ( NOx" role="presentation" style="box-sizing: border-box; max-height: none; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">NOx ) and particulate matter (PM) emissions. In this study, an RCCI engine for the purpose of fuel economy investigation is incorporated in series hybrid electric vehicle (SHEV) architecture, …

Optimizing Supply Chain Collaboration Based On Agreement Buyer-Supplier Relationship With Network Design Problem, Wahyudi Sutopo, Ayu Erliza, Arien Heryansyah

Makara Journal of Technology

In recent years, the rising competitive environment with shorter product life cycles and high customization forces industries to increase their flexibility, speed up their response, and enhance concurrent engineering designs. To integrate these prospects, supply chain collaboration becomes a pertinent strategy for industries to strengthen their competitiveness. The network design problem is used to implement supply chain collaboration. In the buying and selling process, sharing information between buyer and supplier are important to obtain a transaction decision. The optimimum supply chain profit can be identified by mathematical model of network design problem. The Mathematical Model takes into consideration the uncertainity …

Effect Of Milling On The Densification Of Sic-Basedcomposites From Polysilazane, Alfian Noviyanto, Toshiyuki Nishimura

Makara Journal of Technology

High density SiC-based composites from polysilazane were fabricated by high energy milling and hot pressing. After cross-linking at 200 °C, the polysilazane was pyrolysed at 1000 °C in N2 for 2 h to form amorphous Si-C-N-O followed by high energy milling for 1 h. Milled amorphous Si-C-N-O was sintered in hot pressing at 1600 and 1700 °C for 1 h in vacuum under the applied pressure of 50 MPa. Although no sintering additives were used, dense SiC-based composites were obtained with this method. Sintered density was 3.04 g/cm3, while only 2.57 g/cm3 for amorphous Si-C-N-O without milling. It is suggested …

Characterization And Utilization Of Calcium Oxide (Cao) Thermally Decomposed From Fish Bones As A Catalyst In The Production Of Biodiesel From Waste Cooking Oil, Aldes Lesbani, Sabat Okta Ceria Sitompul, Risfidian Mohadi, Nurlisa Hidayati

Makara Journal of Technology

Thermal decomposition of fish bones to obtain calcium oxide (CaO) was conducted at various temperatures of 400, 500, 800, 900, 1000, and 1100 °C. The calcium oxide was then characterized using X-ray diffractometer, FTIR spectrophotometer, and SEM analysis. The calcium oxide obtained from the decomposition at 1000 °C was then used as a catalyst in the production of biodiesel from waste cooking oil. Diffraction pattern of the calcium oxide produced from decomposition at 1000 °C showed a pattern similar to that of the calcium oxide produced by the Joint Committee on Powder Diffraction Standard (JCDPS). The diffractions of 2q values …

Thermoeconomic Optimization Of Cascade Refrigeration System Using Mixed Carbon Dioxide And Hydrocarbons At Low Temperature Circuit, Nasruddin Nasruddin, Arnas Arnas, Ahmad Faqih, Niccolo Giannetti

Makara Journal of Technology

Many applications and industrial processes require very low cooling temperature, such as cold storage in the biomedical field, requiring temperature below -80 °C. However, single-cycle refrigeration systems can only achieve the effective cooling temperature of -40 °C and, also, the performance of the cycle will decrease drastically for cooling temperatures lower than -35°C. Currently, most of cascade refrigeration systems use refrigerants that have ozone depletion potential (ODP) and global warming potential (GWP), therefore, in this study, a cascade system is simulated using a mixture of environmentally friendly refrigerants, namely, carbon dioxide and a hydrocarbon (propane, ethane or ethylene) as the …

Developing Road Infrastructure Route Planning: Increasing Feasibility Of Toll Road Project, Mohammed Ali Berawi, Teuku Yuri Zagloel, Perdana Miraj, Abdur Rohim Boy Berawi, Wellsi Titaheluw, Saipol Bari Bin Abd Karim

Makara Journal of Technology

Indonesian government attempts to improve connectivity and to increase regional activities in Sumatera Island through the development of Trans Sumatera Toll Road (TSTR). However, despite its benefits to local economic development in Sumatera, the project shows low feasibility due to a low amount of investment. It can be attributed from the lack of planning in the initial phase to produce a comprehensive route that considers the various potentials of the regions. Thus, this research aims to investigate alternative route planning of Trans Sumatera Toll Road particularly in this paper for Central Sumatera by studying Gross Regional Domestic Product (GRDP), population …

Thermal And -Γ –Ray Irradiation Effects On The Ionic Conductivity Of (Licl)X(Montmorillonite)1-X, Safei Purnama, Aziz Khan Jahja, Takeshi Sakuma

Makara Journal of Technology

Compositesof montmorillonite (MMT) - lithium salts have been prepared using a simple process of powders mixing followed by heating. The powders resulting from this method are expected to beionic conductors with a high ionic conductivity characteristics. This characteristics is also further improved by employing gamma-ray irradiation technique at specified irradiation doses. The best results were obtained for the (LiCl)0.5(MMT)0.5 composite with a room temperature ionic conductivity of 2.192 mS/cm, which then increases to ~5 mS/cm after gamma irradiation at a dose of 400 kGy. This value is equivalent to the value of the ionic conductivity of current commercial rechargeable lithium …

Design Of The Human Assembly Strategy In A Self-Optimizing Assembly Cell: A Case Study Of Indonesians, Novie Susanto, Ratna Purwaningsih, Kharisma Panca Kurniawati

Makara Journal of Technology

This paper presents a continuing study of the human cognitive aspect application in the technical systems. The last studies design a human-centered design based on the German culture. The result shows a significant difference of human performance between Germans and Indonesians. Therefore, this study examines the human cognitive model based on Indonesian culture to investigate whether the different cognitive model based on the culture aspect can improve the human performance. The study was conducted on 60 people classified by age, young (16-34 years old) and old (older than 34 years old). Participants render predictions on an assembly activity for two …

Mitigation Of The Impact Of High Plug-In Electric Vehicle Penetration On Residential Distribution Grid Using Smart Charging Strategies, Chong Cao, Luting Wang, Bo Chen

Michigan Tech Publications, Part 1

Vehicle electrification presents a great opportunity to reduce transportation greenhouse gas emissions. The greater use of plug-in electric vehicles (PEVs), however, puts stress on local distribution networks. This paper presents an optimal PEV charging control method integrated with utility demand response (DR) signals to mitigate the impact of PEV charging to several aspects of a grid, including load surge, distribution accumulative voltage deviation, and transformer aging. To build a realistic PEV charging load model, the results of National Household Travel Survey (NHTS) have been analyzed and a stochastic PEV charging model has been defined based on survey results. The residential …

Expression And The Functional Study Of Fusion Proteins Α-Amylase And Hemolysin- Αas An Application In Biofilm Polysaccharide Degradation, Gede Yuda Sugiarta, Anggoro Wiseso, Siska Yuliana Sari, Etri Dian Kamila, Vanessa Geraldine, Diana Christina, Muhammad Hanifi, Dwiantari Satyapertiwi, Robby Hertanto, Budiman Bela, Masafumi Yohda, Muhamad Sahlan

Makara Journal of Technology

Biofilm is an aggregate of consortium bacteria that adhere to each other on a surface. It is usually protected by the exopolysaccharide layer. Various invasive medical procedures, such as catheterization, endotracheal tube installation, and contact lens utilization, are vulnerable to biofilm infection. The National Institute of Health (NIH) estimates 65% of all microbial infections are caused by biofilm. Periplasmic α-amylase (MalS) is an enzyme that hydrolyzes α-1, 4- glicosidic bond in glycogen, starch, and others related polysaccharides in periplasmic space. Another protein called hemolysin-α (HlyA) is a secretion signal protein on C terminal of particular peptide in gram negative bacteria. …

‘‘Can I Drop It This Time?’’ Gender And Collaborative Group Dynamics In An Engineering Design-Based Afterschool Program, Jessica Schnittka, Christine Schnittka

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has brought an increasing demand for expertise in science, technology, engineering, and math (STEM). Although strides have been made towards increasing gender diversity in several of these disciplines, engineering remains primarily male dominated. In response, the U.S. educational system has attempted to make engineering curriculum more engaging, informative, and welcoming to girls. Specifically, project-based and design-based learning pedagogies promise to make engineering interesting and accessible for girls while enculturating them into the world of engineering and scientific inquiry. Outcomes for girls learning in these contexts have been mixed. The purpose of this study was to explore how …

Development Of 3d Accelerometer Testing System, Mohammed Abbas Soudai Alsaedi

Dissertations and Theses

Accelerometers are used in numerous industries including aircrafts and missile navigations systems, rotary machines, and electronic devices such as tablets, cell phones, and cameras. Accelerometers of different purposes and specifications are being produced in large quantities. The large demand for accelerometers forces the need for accelerometer testing methodology that is more convenient and accurate. Inertial Micro-Electromechanical Systems Accelerometer (MEMS) require a series of tests that include physical stimuli. One of the key challenges is the cost associated with testing. Therefore, the accurate prediction of the sensor functions not only reduces the testing time but also more importantly contributes to reducing …

Pricing And Reliability Enhancements In The San Diego Activity-Based Travel Model, Joel Freedman

PSU Transportation Seminars

The estimation of demand for priced highway lanes is becoming increasingly important to agencies seeking to improve mobility and find alternative revenue sources for the provision of transportation infrastructure.

However, many modeling tools fall short of what is required for robust estimates of demand with respect to toll and managed lanes in two key areas:

• The value-of-time is often aggregate and not consistently defined throughout the model system, and
• The reliability of transport infrastructure is rarely taken into account.

This presentation describes an effort which implemented recommendations of the Strategic Highway Research Program C04 and L03\L04 tracks on pricing and …

Test Standard For Determining The Fastener-Sheathing Local Translational Stiffness Of Sheathed Cold-Formed Steel Assemblies, 2017 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Test Standard For Determining The Fastener-Sheathing Rotational Stiffness Of Sheathed Cold-Formed Steel Assemblies, 2017 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Rgb Painting Simulation, Brandon Eng

Computer Engineering

No abstract provided.

Mechanics Of Soft Polymers, Trisha Sain

TechTalks

Understanding the mechanics and physics of soft polymers are essential due to their widespread applications across disciplines. (e.g.-composite materials, bio mechanics, soft robotics etc.) The soft polymers in general inherent lightweight, high stretchability, extreme viscous damping and stimuli responsive behavior. Development of computational modeling strategy to predict their constitutive response, stimuli responsive behavior is indeed helpful for designing novel multifunctional soft composites, artificial mussels/tissues. In this talk I will briefly emphasize how we are developing multiscale-multiphysics based modeling methods for soft polymers to understand their macroscopic deformation mechanism, failure and other mechanical properties. The long term goal is to develop …

Stem Cell And Tissue Engineering Research, Feng Zhao

TechTalks

My research focuses on stem cell and tissue engineering. By combining stem cell biology and engineering tools, the Zhao Lab seeks strategies to biofabricate completely biological tissues to regenerate or repair damaged tissues or organs. The function of engineered tissues is being strengthened by recapitulating the in vivo environment of natural tissues. The underlying mechanism is being explored through investigating the interaction of cells with environmental factors such as topographical cues, biophysical forces, and oxygen tensions. We also prompt stem cell research at Michigan Tech to meet the progress and advance of the outside scientific society. Training opportunities are consistently …

Aps Labs (Advanced Power Systems Research Center), Jeffrey D. Naber

TechTalks

Our mission is to promote & facilitate education and research in clean, efficient, and sustainable power and powertrain systems. The center was established in 2007 and in 2014 the 55,000 sq ft APSRC building located near the airport was denoted as a MTU core facility. Our new research contracts in FY2016 were over $2.5M. Our partners include automotive OEMs: GM, Ford, FCA, Toyota, Honda; Commercial OEMs: Cummins, Deere, Detroit, Isuzu, MHI; Suppliers: Delphi, Denso, Borg Warner, Hitachi; and DOE Labs: ANL, ORNL, PNNL, SNL, & INL. We have seven staff to assist in educational and R&D programs and facilities to …