Engineering Commons^™

Impact Of Reclaimed Asphalt Pavement And Recycled Asphalt Shingles On Laboratory And Field Performance Of Texas Asphalt Concrete Pavements, Berenice Salaices Gomez

Open Access Theses & Dissertations

The use of recycled materials in Asphalt Concrete (AC) mixes is highly promoted in the transportation industry. Recycled materials minimize the use of virgin materials, reduce the consumption of resources, and cut costs for new construction or rehabilitation projects. The incorporation of Reclaimed Asphalt Pavement (RAP) and Recycled Asphalt Shingles (RAS) in the AC mixture is promoted as long as equal or improved performance is achieved. The Texas Department of Transportation (TxDOT) is currently placing asphaltic concrete (AC) mixes that are lasting less than their expected performance life when recycled materials are used.

The objective of this Thesis is to …

Microelectromechanical Systems Inertial Measurement Unit As An Attitude And Heading Reference System, Francisco Javier Salcedo Ortega

Open Access Theses & Dissertations

Microelectromechanical systems inertial measurement units (MEMS IMU) are an accessible technology that can be used as an attitude and heading reference system (AHRS); they are low cost and functional enough to be used in many Inertial Navigation Systems (INS). However, the gyroscope component on the IMU tends to severely drift over time without the use of filtering or other navigation systems reference such as a Global Positioning System (GPS) device. This Thesis is focused on working with a variety of IMUs to describe the accuracy, precision, and error propagation. It also works as an introductory guide to the world of …

Raman Microscopic Analysis Of Internal Stress In Boron-Doped Diamond Thin Films, Emma M.A. Sundin

Open Access Theses & Dissertations

The correlations between induced stress on undoped and boron-doped diamond (BDD) thin films, sample chemical composition, and fabrication substrate are investigated in this study via confocal Raman microspectroscopic analysis. Stability of BDD films is relevant to fast-scan cyclic voltammetry, as film delamination and dislocation of BDD-coated electrodes that can occur during neurosurgical electrode implantation can negatively impact the biosensing reliability of this technique. Electrodes were fabricated by coating cylindrical tungsten rods using a custom-built chemical vapor deposition reactor. The results of the analysis reveal a direct correlation between regions of pure diamond and enhanced material stress, as well as preferential …

Design Optimization For Heat Dissipation In Polymer Additive Manufacturing With Joule Heating, Tania Alejandra Ventura

Open Access Theses & Dissertations

Nowadays, the use of additive manufacturing (AM) is mainly focused on the production of prototypes with the purpose of evaluating a design. This industry has become a subject of constant reinvention; in fact, an emerging application of AM is focused on creating parts with embedded electronics. However, the development of both traditional and additive manufactured electronics has led to an increase in power densities and size reduction. Consequently, thermal management has become essential in electronics, as overheating decreases reliability of the component leading to a premature failure.

In this study, a polycarbonate component design with integral electrical circuitry that is …

Material Behavior Of Window 7 Carrier Panel Tiles And Thermal Pane Fragments Recovered From The Space Shuttle Columbia, Brenda Roseanne Arellano

Open Access Theses & Dissertations

Since the end of the space shuttle program, a new generation spacecraft has been developed to transport humans back into space. NASAâ??s Orion will carry a crew beyond low-earth orbit and the exploration of Mars may be possible in the future. Space safety becomes significant with human spaceflight and the risks are high. However, aerospace materials may provide opportunities to prevent future disasters. When the space shuttle Columbia disintegrated during re-entry in 2001, thousands of debris were collected for analysis. In contrast, when the Challenger space shuttle broke apart in 1986, all shuttle debris were buried. These tragic disasters are …

Label-Free Raman Imaging To Monitor Breast Tumor Signatures, John Ciubuc

Open Access Theses & Dissertations

Methods built on Raman spectroscopy have shown major potential in describing and discriminating between malignant and benign specimens. Accurate, real-time medical diagnosis benefits in substantial improvements through this vibrational optical method. Not only is acquisition of data possible in milliseconds and analysis in minutes, Raman allows concurrent detection and monitoring of all biological components. Besides validating a significant Raman signature distinction between non-tumorigenic (MCF-10A) and tumorigenic (MCF-7) breast epithelial cells, this study reveals a label-free method to assess overexpression of epidermal growth factor receptors (EGFR) in tumor cells. EGFR overexpression sires Raman features associated with phosphorylated threonine and serine, and …

The Interplay Between Grain Size And Austenite Stability On Deformation Behavior Of High Strength-High Ductility Combination Nanostructured Stainless Steel, Venkata Sai Ananth Challa

Open Access Theses & Dissertations

The concept of phase reversion involving severe cold deformation of metastable austenite to generate strain-induced martensite, followed by temperature-time annealing sequence, was used to obtain varying grain size from nanograined/ultrafine-grained (NG/UFG) to coarse-grained (CG) regime. This concept was used to obtain â??high strength-high ductilityâ?? combination in nano/ultrafine-grained (NG/UFG) austenitic stainless steel. Using this concept, the objective of the study is to elucidate the dependence of grain size on deformation mechanisms and deformation-induced microstructural changes. The objective was accomplished by combining depth-sensing nanoindentation experiments conducted at various strain rates, and interrupted tensile testing at various strain and post-mortem analyses of deformed …

Development And Integration Of The Janus Robotic Lander: A Liquid Oxygen - Liquid Methane Propulsion System Testbed, Raul Ponce

Open Access Theses & Dissertations

Initiatives have emerged with the goal of sending humans to other places in our solar system. New technologies are being developed that will allow for more efficient space systems to transport future astronauts. One of those technologies is the implementation of propulsion systems that use liquid oxygen and liquid methane (LO2-LCH4) as propellants.

The benefits of a LO2-LCH4 propulsion system are plenty. One of the main advantages is the possibility of manufacturing the propellants at the destination body. A space vehicle which relies solely on liquid oxygen and liquid methane for its main propulsion and reaction control engines is necessary …

Process-Structure-Property Relationship In Magnesium-Based Biodegradable Alloy For Biomedical Applications, Pramanshu Trivedi

Open Access Theses & Dissertations

Magnesium alloys are considered to be the next generation of biomaterials because of their ability to degrade in the physiological environment. We elucidate here the impact of multiaxial forging of Mg-2Zn-2Gd alloy on grain refinement to sub-micron regime and relate the structure to mechanical properties and biological functionality. As-cast and annealed samples were multiaxial forged (MAF) for a total number of two passes with a true strain of ~2/pass. Considering that the microstructure governs the biological response of materials, we studied the constituents of the microstructure in conjunction with the mechanical behavior. The antimicrobial behavior in a Mg-2Zn-2Gd alloy with …

Production And Functionality Of Melanocytes For Use In 3d-Printed Pigment-Capable Skin Tissue, Corinne Nicole Wittmann

Open Access Theses & Dissertations

Skin grafts are used in a variety of medical procedures including burn treatment, skin cancer removal, chronic wound/ulcer treatment, skin infections and diseases, large wound closure and in elective plastic surgeries. Ideally, skin grafts are harvested directly from the patient. However, in some cases, direct harvesting of skin grafts is not possible. In these situations, an equivalent skin substitute obtained through another source is utilized. There will always be a greater risk of rejection in such cases and therefore is only intended to be a temporary treatment. A possible solution to lessen the risks and issues associated with skin grafts …

Quasi-Static Fracture Toughness Testing Of 7075 Aluminum For Spacecraft Separation Joint Applications, Ilse Alcantara

Open Access Theses & Dissertations

Separation joint systems are zero fault tolerant systems that have been used in complex aerospace applications such as vehicle stage separation and payload fairing removal. The structural members of separation joint systems must be able to withstand flight loads, but then completely fracture for instantaneous separation when an explosive is activated. The complex geometry and loading conditions of the structural member create a complicated stress state consisting of mixed tension and shear. A need exists to measure the fracture toughness of the material to ensure it will not support loads intended to fracture and measure its sensitivity to other variables, …

Improving The Regression Rate Of An Htpb Hybrid Rocket Fuel Grain, Travis Wesley Belcher

Open Access Theses & Dissertations

Hybrid rockets are the combination of liquid and solid propellant systems. The University of Texas at El Paso (UTEP) is currently researching combining Hydroxyl-Terminated Polybutadiene (HTPB) and Hydroxyl Ammonium Nitrate (HAN) in preparation for conducting testing using an Air Force developed monopropellant known as AF-M315E as an oxidizer. A new system was developed to conduct this testing based in the Goddard Laboratory at UTEP. This system was subjected to a series of tests to ascertain its performance characteristics, which are detailed in this Thesis.

Electronic Structure Studies On Transition Metal Containing Endohedral Fullerenes, Carbon Onions And Zinc Sulfide Cages, Shusil Bhusal

Open Access Theses & Dissertations

We present the most stable structures for VXSc3-XN@C2n (where X=1-3 and 2n=70, 76, 78 and 80) using a systematic procedure that involves all possible isomers of the host fullerene cages. Subsequently, a detailed investigation of structural and electronic properties of the lowest energy isomers is performed using density functional theory in combination with large polarized Gaussian basis sets. The search procedure developed involved structural optimizations of thousands of fullerenes and correctly identifies the experimentally observed VSc2N@C80 and V2ScN@C80 isomer as the most stable structures. The structural analysis shows that a few V-doped endohedral fullerenes do not follow the isolated pentagon …

Investigation On A Cooling Channel Design For A High Heat Flux Oxy-Fuel Direct Power Extraction Combustor, Luisa Alejandra Cabrera Maynez

Open Access Theses & Dissertations

The implementation of oxy-fuel technology in fossil-fuel power generation could result in a drastic increase of system efficiencies and a reduction of emissions. While typical system temperatures are dictated by material constraints, open-cycle magnetohydrodynamic (MHD) power generators have the potential to utilize the energy of undiluted flames. This work presents design and modeling strategies to develop steady-state supersonic MHD combustors operating at temperatures exceeding 3000 K. Throughout the study, computational fluid dynamics (CFD) models were extensively used as a design and optimization tool. A proof-of-concept 60 kWth model was designed, manufactured and tested in accordance to methods relevant to rocket …

Test Methods For The Fracture And Fatigue Crack Growth Behavior Of Hot Mix Asphalts, Eduardo Garcia

Open Access Theses & Dissertations

The service life and mechanical properties of bituminous mixtures are greatly affected by distress problems such as fracture, thermal cracking, and fatigue cracking of the asphalt layers. The fracture and fatigue crack growth (FCG) behavior of bituminous mixtures are difficult to quantify due to material-, test-, and equipment-related uncertainties. The goal of this study is to introduce a systematic fracture and fatigue crack growth testing approach for hot mix asphalts (HMAs). The objective is to experimentally evaluate the fracture resistance and fracture toughness behavior of a dense-graded HMA material at different temperatures and varying thicknesses. The effect of thickness on …

Characterization And Comparison Of Metallic And Ceramic Parts Fabricated Using Powder Bed-Based Additive Manufacturing Technologies, Jose Angel Gonzalez

Open Access Theses & Dissertations

Additive manufacturing (AM), or layer-by-layer part fabrication, is enabling the materialization of ideas that were near to impossible to achieve in the past, while providing advantages that include reduced material footprint, increased complexity, reduced lead times, etc. AM has been integrated to highly specialized markets that include aerospace, military, automotive, biomedical, and prototyping.

Although an apparent growth is being witnessed across nearly all AM platforms, technologies with capabilities of producing metallic parts have arguably received the most widespread interest, with powder bed fusion (i.e. electron beam melting and selective laser melting). This class of AM technology produces parts by judiciously …

Asset Management Support Tools To Assist Agencies In The Development Of Guardrail Preservation Programs, Sandra N. Gutierrez

Open Access Theses & Dissertations

The purpose of this Thesis is to develop a Guardrail Asset Management Framework and a Condition-Based Model to assist agencies in the development of guardrail preservation programs. Both of the guardrail asset management tools can be incorporated into an existing asset management program to assist agencies in utilizing guardrail inventory to forecast key asset management parameters such as the guardrail condition, funds necessary for maintenance and repair, backlogged funding, guardrail system value, and the guardrail sustainability ratio. Each of these parameters is described and determined for a case study involving six scenarios modeling funding and maintenance constraints that can arise …

Carbon Nanomaterials And Their Application To Electrochemical Sensors: A Review, Aoife Power, Shaneel Chandra, Brian Gorey, James Chapman

Articles

Carbon has long been applied as an electrochemical sensing interface owing to its unique electrochemical properties. Moreover, recent advances in material design and synthesis, particularly nanomaterials, has produced robust electrochemical sensing systems that display superior analytical performance. Carbon nanotubes (CNTs) are one of the most extensively studied nanostructures because of their unique properties. In terms of electroanalysis, the ability of CNTs to augment the electrochemical reactivity of important biomolecules and promote electron transfer reactions of proteins is of particular interest. The remarkable sensitivity of CNTs to changes in surface conductivity due to the presence of adsorbates permits their application as …

Robust And Agile System Against Fault And Anomaly Traffic In Software Defined Networks, Mihui Kim, Younghee Park, Rohit Kotalwar

Faculty Publications

The main advantage of software defined networking (SDN) is that it allows intelligent control and management of networking though programmability in real time. It enables efficient utilization of network resources through traffic engineering, and offers potential attack defense methods when abnormalities arise. However, previous studies have only identified individual solutions for respective problems, instead of finding a more global solution in real time that is capable of addressing multiple situations in network status. To cover diverse network conditions, this paper presents a comprehensive reactive system for simultaneously monitoring failures, anomalies, and attacks for high availability and reliability. We design three …

Analysis And Design Of A Highly Compact Ellipse-Shaped Ultra-Wideband Bandpass Filter (Uwb-Bpf) With A Notched Band, Xuetan Liu

Theses and Dissertations

Since the Federal Communications Commission’s endorsement of the frequency band of 3.1 – 10.6 GHz in 2002 to be unlicensed for wireless communication applications, various ultra-wideband bandpass filters (UWB-BPFs) have been proposed and designed. Different UWB-BPF configurations were presented in the past years to meet the very strict UWB-BPF specifications in terms of ultra-band requirement, low return loss, high rejection in notched bands. However, most of the previous works are limited by large dimension size, complex geometry, and high production cost.

The major objective of this work is to design a highly compact, simple geometry, and low-cost UWB-BPF, which passes …

A Comprehensive Evaluation Of Hybrid Wetting Configurations On Dropwise Condensation, Karim Khazal Egab

Theses and Dissertations

The heat transfer during condensation on a surface depends on the pattern design of the surface, which can highly influence hydrophobic/hydrophilic wettability. In this study hybrid pattern designs were studied. The relationship between the droplet dynamic and the hybrid pattern design can alter the drainage rates, droplet departure frequencies, and the condensation heat transfer rates. Therefore, two series of hybrid patterned surfaces have been designed, developed, and tested during condensation of water vapor on horizontal copper tubes, and compared to complete dropwise and complete filmwise condensation samples. This is to investigate the design that provides the maximum improvement in the …

Multi-Axis Multi-Material Fused Filament Fabrication With Continuous Fiber Reinforcement, Wout De Backer

Theses and Dissertations

Additive Manufacturing (AM) has become a well-recognized method of manufacturing and has steadily become more accessible as it allows designers to prototype ideas, products and structures unconceivable with subtractive manufacturing techniques for both consumer grade and industrial grade applications. Commonly used thermoplastics for 3D printing have properties that may not be sufficient to comply with the application’s certification requirements, or their performance is less than desirable for aerospace and other high performance applications. Additionally, additively manufactured parts have reduced mechanical properties in the build direction of the print, and are generally weaker than their equivalent injection-molded parts. Furthermore, Computer Aided …

Mobile Application For Shipping Goods For Individuals And Truckers In India, Sendurr Selvaraj

Theses and Dissertations

India is a vast country with majority of its cities and towns connected through roads. Road transportation contributes to 86% share of the freight transport of the country with trucking companies dominating the entire space. With growing economy and demands raising, the quality of service of the trucking company remains poor. The major reasons are unorganized practice and lack of transparency. Moreover, limited access for customers to reach out to truckers to transport their goods.

This thesis aims to create a platform for customers and truckers to realize their needs with a help of a mobile application. Customers can search …

Intermodal Network Design And Expansion For Freight Transportation, Fateme Fotuhiardakani

Theses and Dissertations

Over the last 50 years, international trade has grown considerably, and this growth has strained the global supply chains and their underlying support infrastructures. Consequently, shippers and receivers have to look for more efficient ways to transport their goods. In recent years, intermodal transport is becoming an increasingly attractive alternative to shippers, and this trend is likely to continue as governmental agencies are considering policies to induce a freight modal shift from road to intermodal to alleviate highway congestion and emissions. Intermodal freight transport involves using more than one mode, and thus, it is a more complex transport process. The …

Mechanical Characterization Of Parts Produced By Ceramic On‐Demand Extrusion Process, Amir Ghazanfari, Wenbin Li, Ming Leu, Gregory Hilmas

Faculty Publications, Mechanical Engineering

Ceramic On‐Demand Extrusion (CODE) is an additive manufacturing process recently developed to produce dense three‐dimensional ceramic components. In this paper, the properties of parts produced using this freeform extrusion fabrication process are described. High solids loading (~60 vol%) alumina paste was prepared to fabricate parts and standard test methods were employed to examine their properties including the density, strength, Young's modulus, Weibull modulus, toughness, and hardness. Microstructural evaluation was also performed to measure the grain size and critical flaw size. The results indicate that the properties of parts surpass most other ceramic additive manufacturing processes and match conventional fabrication techniques.

Evaluation Of Red Rrfb Implementation At Freeway Off-Ramps And Its Effectiveness On Alleviating Wrong-Way Driving, Seckin Ozkul, Pei-Sung Lin

CUTR Faculty Journal Publications

Wrong-way crashes are a major cause for safety concern along freeways and limited access facilities. This study investigated three different aspects of the use of Rectangular Rapid Flashing Beacons (RRFBs): 1) different settings of red RRFBs and their perceived effectiveness on reducing wrong-way driving based on a public opinion survey, 2) the effect of active red RRFBs on the behavior of drivers traveling on adjacent roadways via a before-and-after study, and 3) the effectiveness of red RRFBs on alleviating wrong-way driving on freeway off-ramps by analyzing the percentage of vehicles turning back after observing the red RRFB activation. Based on …

Improvement Assessment Of Bus Serviceability By Proposing Route Revision, Shahrzad Ainkeshavarzi, Hamed Soleimani

CUTR Faculty Journal Publications

Public transit is an essential part of a city’s transportation. An efficient transit system makes a city more sustainable by reducing the number of single occupancy vehicles leading to a reduction in emissions, energy consumption and less congestion on streets. Public serviceability is an important indicator to indicate how good a transit route is determined; however, it could change during the years since population density is variable. This study is intended to do a comparison between serviceability of a bus line in Memphis, Tennessee for one zip code area to point out the necessity of considering route revising in short-term …

Exploring Factors Contributing To Lane Changes During Left Turns On Quadruple Left-Turn Lanes At Signalized Intersections, Fulu Wei, Zhenyu Wang, Jian Lu

CUTR Faculty Journal Publications

Quadruple left-turn lanes are employed gradually at some major intersections in Jilin, China. At these intersections, frequent lane changes during left turns of vehicles can lead to vastly disordered traffic operations. In this study, the factors contributing to lane changes during left turn behaviors at quadruple left-turn lane intersections were interpreted based on a field survey. In total, data on 192 green intervals and 550 individual lane-change behaviors were collected in Changchun, Jilin Province. A lane-changing rate model was established to predict the rate of lane changes during left turns. In addition, an interval selection model was built to estimate …

Leveraging The Srtp Protocol For Over-The-Network Memory Acquisition Of A Ge Fanuc Series 90-30, George Denton, Filip Karpisek, Frank Breitinger, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

Programmable Logic Controllers (PLCs) are common components implemented across many industries such as manufacturing, water management, travel, aerospace and hospitals to name a few. Given their broad deployment in critical systems, they became and still are a common target for cyber attacks; the most prominent one being Stuxnet. Often PLCs (especially older ones) are only protected by an outer line of defense (e.g., a firewall) but once an attacker gains access to the system or the network, there might not be any other defense layers. In this scenario, a forensic investigator should not rely on the existing software as it …

Investigating The Parameters That Influence The Particle Mass Concentration Rates In A Grade C Cleanroom., Nazar H. Baker

Theses

The cleanroom design engineers use the guidelines tables, in which the Air Change Rates (ACHs) are determined based on the room cleanliness class. These guidelines are based on experience and do not fully address many other critical variables that influence the particulate level and particle distribution. These simplified approaches could often cause significant energy waste. In the last five decades, a number of mathematical models were developed to determine the airflow required in cleanrooms. As a consequence of the approximation of many critical variables in these models, these models can only be used as a qualitative indicator of the airflow …