Engineering Commons^™

An Efficient Heuristic To Balance Trade-Offs Between Utilization And Patient Flowtime In Operating Room Management, Feidi Dang

Theses and Dissertations--Mechanical and Aerospace Engineering

Balancing trade-offs between production cost and holding cost is critical for production and operations management. Utilization of an operating room affects production cost, which relates to makespan, and patient flowtime affects holding cost. There are trade-offs between two objectives, to minimize makespan and to minimize flowtime. However, most existing constructive heuristics focus only on single-objective optimization. In the current literature, NEH is the best constructive heuristic to minimize makespan, and LR heuristic is the best to minimize flowtime. In this thesis, we propose a current and future deviation (CFD) heuristic to balance trade-offs between makespan and flowtime minimizations. Based on …

A Transfer Matrix Approach To Determine The Low Frequency Insertion Loss Of Enclosures Including Applications, Shujian He

Theses and Dissertations--Mechanical and Aerospace Engineering

Partial enclosures are commonly used to reduce machinery noise. However, it is well known in industry that enclosures sometimes amplify the sound at low frequencies due to strong acoustic resonances compromising the performance. These noise issues are preventable if predicted prior to prototyping and production. Though boundary and finite element approaches can be used to accurately predict partial enclosure insertion loss, modifications to the model require time for remeshing and solving. In this work, partial enclosure performance at low frequencies is simulated using a plane wave transfer matrix approach. Models can be constructed and the effect of design modifications can …

Utilization Of Empirical Models To Determine The Bulk Properties Of Compressed Sound Absorptive Materials, Ruimeng Wu

Theses and Dissertations--Mechanical and Aerospace Engineering

Empirical models based on flow resistivity are commonly used to determine the bulk properties of porous sound absorbing materials. The bulk properties include the complex wavenumber and complex characteristic impedance which can be used directly in simulation models. Moreover, the bulk properties can also be utilized to determine the normal incidence sound absorption and specific acoustic impedance for sound absorbing materials of any thickness and for design of layered materials. The sound absorption coefficient of sound absorbing materials is measured in an impedance tube using wave decomposition and the measured data is used to determine the flow resistivity of the …

Investigation Of Polishing Methods And Surface Analysis After Machining Aisi 4140 Alloy Steel, Qiang Qi

Theses and Dissertations--Mechanical and Aerospace Engineering

AISI 4140 alloy steel has been a very common material to be investigated in automotive and aerospace industries for several decades. AISI 4140 alloy steel is chromium, molybdenum, and manganese containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. The functional performance is largely determined by the surface states after machining.

The aim of the present study is to explore the polishing methods and surface analysis after machining AISI 4140 alloy steel in different cutting speeds and cooling conditions. The surface analysis includes surface roughness, hardness and residual stresses. Compared to traditional …

Autonomous Quadrotor Collision Avoidance And Destination Seeking In A Gps-Denied Environment, Thomas C. Kirven

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis presents a real-time autonomous guidance and control method for a quadrotor in a GPS-denied environment. The quadrotor autonomously seeks a destination while it avoids obstacles whose shape and position are initially unknown. We implement the obstacle avoidance and destination seeking methods using off-the-shelf sensors, including a vision-sensing camera. The vision-sensing camera detects the positions of points on the surface of obstacles. We use this obstacle position data and a potential-field method to generate velocity commands. We present a backstepping controller that uses the velocity commands to generate the quadrotor's control inputs. In indoor experiments, we demonstrate that the …

Adaptive Multi-Objective Operating Room Planning With Stochastic Demand And Case Times, Vivek Reddy Gunna

Theses and Dissertations--Mechanical and Aerospace Engineering

The operating room (OR) is accountable for most hospital admissions and is one of the most cost and work intensive areas in the hospital. From recent trends, we discover an unexpected parallel increase in expenditure and waiting time. Therefore, improving OR planning has become obligatory, particularly regarding utilization, and service level. Significant challenges in OR planning are the high variations in demand, processing times of surgical specialties, the trade-off between the objectives, and control of OR performance in long-term. Our model provides OR configurations at a strategical level of OR planning to minimize the tradeoff between the utilization and service …

Product Disassemblability And Remanufacturability Assessment: A Quantitative Approach, Ammar Ali

Theses and Dissertations--Mechanical and Aerospace Engineering

Majority of the products get discarded at end-of-life (EoL), causing environmental pollution, and resulting in a complete loss of all materials and embodied energy. Adopting a closed-loop material flow approach can aid preventing such losses and enable EoL value recovery from these products. Design and engineering decisions made and how products are used impact the capability to implement EOL strategies such as disassembly and remanufacturing. Some underlying factors affecting the capability to implement these EOL strategies have been discussed in previous studies. However, relevant metrics and attributes are not well defined and comprehensive methods to quantitatively evaluate them are lacking. …

Binding, Protection, And Rna Delivery Properties Of Porous Silica Nanoparticles In Spodoptera Frugiperda Cells, Emily Nadeau

Theses and Dissertations--Entomology

Traditional methods of pest control are threatened by the development of insecticide resistance, both to traditional insecticides and Bt toxins. Discovery of RNA interference (RNAi) has created opportunities to develop new insect control mechanisms. However, RNAi responses appear to be robust in coleopteran pests, but other orders, e.g. Lepidoptera and Hemiptera, present varied or ineffective RNAi responses. Current delivery strategies for double-stranded RNA (dsRNA) include microinjection, ingestion, and soaking. These approaches have benefits and problems. This study investigates the potential for porous silica nanoparticles (pSNPs) to improve the delivery of dsRNA and induce an RNAi response in Spodoptera frugiperda cells. …

Linking Climate Change And Socio-Economic Impact For Long-Term Urban Growth In Three Mega-Cities, Qi Lu

Electronic Theses and Dissertations

Urbanization has become a global trend under the impact of population growth, socio-economic development, and globalization. However, the interactions between climate change and urban growth in the context of economic geography are unclear due to missing links in between the recent planning megacities. This study aims to conduct a multi-temporal change analysis of land use and land cover in New York City, City of London, and Beijing using a cellular automata-based Markov chain model collaborating with fuzzy set theory and multi-criteria evaluation to predict the city's future land use changes for 2030 and 2050 under the background of climate change. …

Biological Nutrient Removal (Bnr) Process Optimization And Recovery Of Embedded Energy Using Biodiesel By-Product, Sultan Salamah

Electronic Theses and Dissertations

Enhanced biological phosphorus removal (EBPR) as well as biological nitrogen removal require a carbon source to be carried out. Volatile fatty acid (VFAs) (mainly acetic and propionic acids) are the major driving force for EBPR. Many domestic wastewaters have an insufficient amount of VFAs. However, carbon sources such as acetic and propionic acids can be produced using primary solids fermentation process. Due to the cost of VFA production, an external carbon source can be added to the biological nutrient removal (BNR) system that can be fermented to provide the desired VFAs. Glycerol (biodiesel by-product) offers a solution to reduce carbon …

Investigating The Impact Of Levels Of Experience On Workload During Nuclear Power Plant Operations, Jonathan Harris

Electronic Theses and Dissertations

The human-machine interface (HMI) of a Nuclear Power Plant (NPP) Main Control Room (MCR) is complex. Understanding HMI factors that influence Reactor Operator (RO) performance and workload when controlling an NPP is important. The Nuclear Regulatory Commission (NRC) began a program of research known as the Human Performance Test Facility (HPTF) with the goal of collecting human performance data to better understand cognitive and physical elements that support safe control room operation. The HPTF team developed an experimental methodology to evaluate workload using perceived ratings, performance measures, and physiological correlates. This methodology focuses on tasks commonly performed during operations in …

Annual Water Balance Model Based On Generalized Proportionality Relationship And Its Applications, Yin Tang

Electronic Theses and Dissertations

The main goal of this dissertation research is to derive a type of conceptual models for annual water balance at the watershed scale. The proportionality relationship from the Soil Conservation Service Curve Number method was generalized to annual scale for deriving annual water balance model. As a result, a one-parameter Budyko equation was derived based on one-stage partitioning; and a four-parameter Budyko equation was derived based on two-stage partitioning. The derived equations balance model parsimony and representation of dominant hydrologic processes, and provide a new framework to disentangle the roles of climate variability, vegetation, soil and topography on long-term water …

Application Of Multiaxial Cyclic Loading For Constitutive Model And Parameter Determination Of Steels, Bassem Felemban

Electronic Theses and Dissertations

For many candidate materials, constitutive models and their parameters are identified using uniaxial test data. Real components, however, generally operate in a multi-axial loading environments. Consequently, constitutive models deployed by uniaxial conditions may carry over to service conditions with inherit limitations. Research is proposed to determine the constitutive model constants for the creep and plasticity responses of a material via multi-axial fatigue testing which may contain ratcheting. It is conjectured that directly regressing data under conditions that favor those of actual service use will lead to more accurate modeling under these conditions, as well as a reduced consumption of model …

Improving Safety Under Reduced Visibility Based On Multiple Countermeasures And Approaches Including Connected Vehicles, Yina Wu

Electronic Theses and Dissertations

The effect of low visibility on both crash occurrence and severity is a major concern in the traffic safety field. Different approaches were utilized in this research to analyze the effects of fog on traffic safety and evaluate the effectiveness of different fog countermeasures. First, a "Crash Risk Increase Indicator (CRII)" was proposed to explore the differences of crash risk between fog and clear conditions. A binary logistic regression model was applied to link the increase of crash risk with traffic flow characteristics. Second, a new algorithm was proposed to evaluate the rear-end crash risk under fog conditions. Logistic and …

Redox-Active Solid State Materials And Its Biomedical And Biosensing Applications, Ankur Gupta

Electronic Theses and Dissertations

Reactive oxygen species (ROS) are byproducts of physiological processes in human body, and strengthened production of ROS is known to cause acute conditions such as inflammation, aging, Alzheimer's disease, melanoma and ovarian cancer, fibrosis and multiple sclerosis. Therefore, early detection of ROS at nanomolar concentration (at cellular level) and developing more potent antioxidants is essential for regular health monitoring. As an example, ROS are also responsible for inflammation reactions at orthopedic implants-tissue interface triggered by wear debris. Inflammation induced by ROS results in revision surgery. Coatings of redox-active materials exhibiting antioxidant properties on implants have potential to mitigate the inflammation …

Characterization Of Mechanical Properties In Nanoparticle Reinforced Hybrid Carbon Fiber Composites Using Photoluminescence Piezospectroscopy, Sanjida Jahan

Electronic Theses and Dissertations

Carbon fiber composites have become popular in aerospace structures and applications due to their light weight, high strength, and high performance. Hybrid carbon fiber reinforced polymer (HCFRP) composites with alumina nanoparticles reinforcement display improved material properties such as fracture toughness, resistance to crack propagation and improved fatigue life. However, homogeneous dispersion of nanoscale materials in the matrix is important for even distribution of the improved properties. Implementing silane coupling agents (SCAs) improves dispersion by acting as a bridge between organic and inorganic materials, which increases interfacial strength and decreases sedimentation by bonding the particulate filler to the fiber reinforcement. This …

Towards High-Efficiency Data Management In The Next-Generation Persistent Memory System, Xunchao Chen

Electronic Theses and Dissertations

For the sake of higher cell density while achieving near-zero standby power, recent research progress in Magnetic Tunneling Junction (MTJ) devices has leveraged Multi-Level Cell (MLC) configurations of Spin-Transfer Torque Random Access Memory (STT-RAM). However, in order to mitigate the write disturbance in an MLC strategy, data stored in the soft bit must be restored back immediately after the hard bit switching is completed. Furthermore, as the result of MTJ feature size scaling, the soft bit can be expected to become disturbed by the read sensing current, thus requiring an immediate restore operation to ensure the data reliability. In this …

Design Of A Framework For Sharing And Generating Combat Damage Assessment(Cda) Of A Hla/Rti Federation, Hongseon Park

Electronic Theses and Dissertations

In this paper, a new framework for sharing Combat Damage Assessment(CDA) is proposed to find out the differences of each CDA system between military combat units belonging to their own federate in a HLA/RTI federation. When there are engagements in a battle among combat units belonging to their own federate in the HLA/RTI federation, each result of damage assessments is very different. This affects the HLA/RTI federation’s confidence and needed to be overcome because it is also one of the major issues to generate reliable engagement data. Also, a RTI can generate only qualitative data about combat damage while quantitative …

Developing Warrants For Designing Continuous Flow Intersection And Diverging Diamond Interchange, Meshal Almoshaogeh

Electronic Theses and Dissertations

The main goal of this dissertation is to have better understanding of design and operation of the Continuous Flow Intersection (CFI) and Diverging Diamond Interchange (DDI) - as well as numerous factors that affect signalized intersection and interchange performance due to increased left-turn demand. The dissertation attempts to assess the need and justification to redesign intersections and interchanges to improve their efficiency. And to that end, an extensive literature review of existing studies was done with the prime aim of perceiving the principles of these innovative designs and determining the methodology to-be-followed, in order to reach the study's core. Accordingly, …

Design, Simulation And Characterization Of Novel Electrostatic Discharge Protection Devices And Circuits In Advanced Silicon Technologies, Wei Liang

Electronic Theses and Dissertations

Electrostatic Discharge (ESD) has been one of the major reliability concerns in the advanced silicon technologies and it becomes more important with technology scaling. It has been reported that more than 35% of the failures in integrated circuits (ICs) are ESD induced. ESD event is a phenomenon that a finite amount of charges transfer between two objects with different potential in a quite short time. Such event contains a large energy and the ICs without proper ESD protection could be destroyed easily, so ESD protection solutions are essential to semiconductor industry. ESD protection design consists of on-chip and off-chip ESD …

Learning Kernel-Based Approximate Isometries, Mahlagha Sedghi

Electronic Theses and Dissertations

The increasing availability of public datasets offers an inexperienced opportunity to conduct data-driven studies. Metric Multi-Dimensional Scaling aims to find a low-dimensional embedding of the data, preserving the pairwise dissimilarities amongst the data points in the original space. Along with the visualizability, this dimensionality reduction plays a pivotal role in analyzing and disclosing the hidden structures in the data. This work introduces Sparse Kernel-based Least Squares Multi-Dimensional Scaling approach for exploratory data analysis and, when desirable, data visualization. We assume our embedding map belongs to a Reproducing Kernel Hilbert Space of vector-valued functions which allows for embeddings of previously unseen …

End To End Brain Fiber Orientation Estimation Using Deep Learning, Nandakishore Puttashamachar

Electronic Theses and Dissertations

In this work, we explore the various Brain Neuron tracking techniques, one of the most significant applications of Diffusion Tensor Imaging. Tractography is a non-invasive method to analyze underlying tissue micro-structure. Understanding the structure and organization of the tissues facilitates a diagnosis method to identify any aberrations which can occur within tissues due to loss of cell functionalities, provides acute information on the occurrences of brain ischemia or stroke, the mutation of certain neurological diseases such as Alzheimer, multiple sclerosis and so on. Under all these circumstances, accurate localization of the aberrations in efficient manner can help save a life. …

Developing An Insider Threat Experimental Environment, Eric Ortiz

Electronic Theses and Dissertations

Simulated, 3D gaming environments have been used for a wide-range of applications including training, entertainment, and experimentation in an assortment of domains for some time. This can be attributed to their unique ability to emulate multifaceted situations that may be difficult to control, while affording participants the opportunity to operate in a relatively safe environment. In cybersecurity research, investigation of insider threat behavior is an endeavor that has received little attention in terms of available environments and resources for experimental manipulation. This research effort aimed to close this gap. A simulated, 3D gaming environment and accompanying scenarios were developed for …

Heat Transfer, Friction, And Turbulent Analysis On Single Ribbed-Wall Square Channel, Christopher Vergos

Electronic Theses and Dissertations

An experimental investigation of heat transfer and friction behavior for a fully developed flow in a non-rotating square channel was conducted under a wide range of Reynolds numbers from 6,000 to 180,000. The rig used in this study was a single ribbed wall variant of Ahmed et al.'s [ 1 ] rig from which results of this rig were compared. Ahmed et al.'s rig was a replica of Han et al.'s square channel [ 2 ] used to validate their work, and expand the Reynolds number range for both heat transfer and friction data. The test section was 22 hydraulic …

Ultra-Efficient Cascaded Buck-Boost Converter, Anirudh Ashok Pise

Electronic Theses and Dissertations

This thesis presents various techniques to achieve ultra-high-efficiency for Cascaded-Buck-Boost converter. A rigorous loss model with component non linearity is developed and validated experimentally. An adaptive-switching-frequency control is discussed to optimize weighted efficiency. Some soft-switching techniques are discussed. A low-profile planar-nanocrystalline inductor is developed and various design aspects of core and copper design are discussed. Finite-element-method is used to examine and visualize the inductor design. By implementing the above, a peak efficiency of over 99.2 % is achieved with a power density of 6 kW/L and a maximum profile height of 7 mm is reported. This converter finds many applications …

Investigation Of Heat Transfer Enhancement Within A Concentric Annulus, Alexander Hanhold

Electronic Theses and Dissertations

Effective heat exchange is key for many energy applications including heat exchangers, heat extraction from heat source, and heat rejection to ambient thermal sink. This study focuses on the investigation for a specific heat exchange configuration, namely heat removal within a concentric annular passage using helical turbulators and jet impingement. Numerical testing was used to see how the different geometric parameters affect the heat transfer and pressure drop within the annulus by using helicoil turbulators. A vast range of designs were studied by changing the turbulator shape, pitch, and blockage ratio while maintaining a constant Reynolds number of 25,000. CFD …

Reducing Sulfuric Acid Pretreatment In A Nanofiltration Process Treating Surficial Groundwater, Carlyn Higgins

Electronic Theses and Dissertations

Nanofiltration (NF) is a pressure driven membrane process employed in drinking water treatment that requires pretreatment for reliable operation. The objective of this research was to determine if NF membranes can proficiently operate with a decreased or eliminated dose of sulfuric acid pretreatment. When used as pretreatment, sulfuric acid prevents calcium carbonate scaling on NF membranes, yet is costly, hazardous, and imparts high sulfate concentrations to NF feed and concentrate streams. To conduct this research, a 0.324 million gallon per day (MGD) NF pilot plant was operated for 3,855 run-hours at a flux rate of 15 gallons per square foot-day. …

Development Of An Adaptive Restoration Tool For A Self-Healing Smart Grid, Amir Golshani

Electronic Theses and Dissertations

Large power outages become more commonplace due to the increase in both frequency and strength of natural disasters and cyber-attacks. The outages and blackouts cost American industries and business billions of dollars and jeopardize the lives of hospital patients. The losses can be greatly reduced with a fast, reliable and flexible restoration tool. Fast recovery and successfully adapting to extreme events are critical to build a resilient, and ultimately self-healing power grid. This dissertation is aimed to tackle the challenging task of developing an adaptive restoration decision support system (RDSS). The RDSS determines restoration actions both in planning and real-time …

Polyurethane Fiber Reinforced Polymer Strengthening Of Shear Deficient Reinforced Concrete Beams, Yasir Al-Lebban

Electronic Theses and Dissertations

The use of externally-bonded fiber-reinforced polymer (FRP) composites has been established as an effective means for the strengthening of shear-deficient reinforced concrete (RC) flexural members. Epoxy-based wet layup systems were predominantly employed in previous studies. In this study, carbon FRP pre-impregnated with polyurethane resin is utilized in strengthening shear-deficient RC beams and compared to an epoxy resin. Fourteen small-scale (96 in span, 6 in width, and 12 in height) and five large-scale (132 in span, 12 in width, and 17 in height) flexural specimens were tested, considering FRP system type (polyurethane versus epoxy), size effect, shear span-to-depth ratio, FRP configuration …

A Framework For Lean Transformation In Developing Countries: The Case Of Saudi Arabian Industry, Murad Andejany

Electronic Theses and Dissertations

Lean is a dynamic, knowledge-driven, and customer focused philosophy that continuously eradicates waste and generates value, with a goal to improve a company's productivity, efficiency, and quality. Successful implementation of lean does not only offer cost reduction and improved quality and productivity, but also provides efficient guidance for organizations to attain significant and continued growth. Although its adoption by companies has proven successful in developed countries, there is no sufficient evidence of its successful implementation in developing countries such as Saudi Arabia. A review of the literature indicates that there is a need to study lean transformation in developing countries …