Engineering Commons^™

Gradient In Microstructure And Mechanical Property Of Selective Laser Melted Alsi10mg, Yujing Liu, Zeng Qian Liu, Y Jiang, G.W Wang, Yang Yang, Laichang Zhang

Research outputs 2014 to 2021

It is known that metal parts can be made stronger, tougher and better wear resistance by introducing gradient microstructure. This work reports the cooling rate of melt pool induced discrepancy in microstructural gradient and element distribution during selective laser melting (SLM), thereby resulting in decrease in microhardness and wear resistance from surface to inside with a range of ∼100 μm of SLM- manufactured AlSi10Mg alloy. The cooling rate in the top surface of melt pool reaches ∼ 1.44 × 10⁶ K/s, which is much higher than that at the bottom ( ≤ 1 × 10³ K/s). Such a …

Drilling Reconfigurable Machine Tool Selection And Process Parameters Optimization As A Function Of Product Demand, Ana Vafadar, Kevin Hayward, Majid Tolouei-Rad

Research outputs 2014 to 2021

Special purpose machines (SPMs) are customized machine tools that perform specific machining operations in a variety of production contexts, including drilling-related operations. This research investigates the effect of optimal process parameters and SPM configuration on the machine tool selection problem versus product demand changes. A review of previous studies suggests that the application of optimization in the feasibility analysis stage of machine tool selection has received less attention by researchers. In this study, a simulated model using genetic algorithm is proposed to find the optimal process parameters and machine tool configuration. During the decision-making phase of machine tool selection, unit …

Cradg: A Chaotic Radg Security System, Salah Albermany, Maryam Nathim, Zahir Hussain

Research outputs 2014 to 2021

A high-performance ciphering algorithm is presented. The proposed method combines old school ciphering (Reaction Automata Direct Graph (RADG)) with chaotic systems to obtain higher level of security. Chaotic sequences are highly sensitive to any changes in their parameters, adding a higher level of security to the proposed approach, called CRADG.

Fretting Wear Behaviors Of Aluminum Cable Steel Reinforced (Acsr) Conductors In High-Voltage Transmission Line, Xingchi Ma, Lei Gao, Junxi Zhang, Laichang Zhang

Research outputs 2014 to 2021

This work reports the fretting wear behavior of aluminum cable steel reinforced (ACSR) conductors for use in high-voltage transmission line. Fretting wear tests of Al wires were conducted on a servo-controlled fatigue testing machine with self-made assistant apparatus, and their fretting process characteristics, friction force, wear damage, and wear surface morphology were detailed analyzed. The results show that the running regime of Al wires changes from a gross slip regime to a mixed regime more quickly as increasing contact load. With increasing amplitudes, gross slip regimes are more dominant under contact loads of lower than 30 N. The maximum friction …

Evaluation Of The Effect Of Product Demand Uncertainty On Manufacturing System Selection, Ana Vafadar, Majid Tolouei-Rad, Kevin Hayward

Research outputs 2014 to 2021

The use of advanced manufacturing systems is widespread; however, manufacturers frequently face difficult decisions when it comes to selecting the most appropriate system. Uncertainty regarding product demand makes this process more difficult, as many factors are influencing simultaneously. This paper focuses on analyzing the demand uncertainty on the performance of modular drilling manufacturing systems versus other alternatives and evaluating the uncertainty’s impacts on the final decision. To do so, a model is suggested and the effect of demand uncertainty on the output is investigated. Three automotive components of varying complexity are used to examine the approach for making reliable decisions

Multi-Time Scale Control Of Demand Flexibility In Smart Distribution Networks, Bishnu P. Bhattarai, Kurt S. Myers, Birgitte Bak-Jensen, Sumit Paudyal

Michigan Tech Publications, Part 1

This paper presents a multi-timescale control strategy to deploy electric vehicle (EV) demand flexibility for simultaneously providing power balancing, grid congestion management, and economic benefits to participating actors. First, an EV charging problem is investigated from consumer, aggregator, and distribution system operator’s perspectives. A hierarchical control architecture (HCA) comprising scheduling, coordinative, and adaptive layers is then designed to realize their coordinative goal. This is realized by integrating multi-time scale controls that work from a day-ahead scheduling up to real-time adaptive control. The performance of the developed method is investigated with high EV penetration in a typical residential distribution grid. The …

Surface Ozone And Its Precursors At Summit, Greenland: Comparison Between Observations And Model Simulations, Yaoxian Huang, Shiliang Wu, Louisa J. Kramer, Detlev Helmig, Richard E. Honrath

Michigan Tech Publications, Part 1

Recent studies have shown significant challenges for atmospheric models to simulate tropospheric ozone (O3/and its precursors in the Arctic. In this study, ground-based data were combined with a global 3-D chemical transport model (GEOS-Chem) to examine the abundance and seasonal variations of O3 and its precursors at Summit, Greenland (72.34° N, 38.29° W; 3212 ma.s.l.). Model simulations for atmospheric nitrogen oxides (NOx/, peroxyacetyl nitrate (PAN), ethane (C2H6/, propane (C3H8/, carbon monoxide (CO), and O3 for the period July 2008-June 2010 were compared with observations. The model performed well in simulating certain species (such as CO and C3H8/, but some significant …

Human-Machine Interface Development For Modifying Driver Lane Change Behavior In Manual, Automated, And Shared Control Automated Driving, Walter Joseph Talamonti

Wayne State University Dissertations

Rear-end crashes are common on U.S. roads. Driver assistance and automated driving technologies can reduce rear-end crashes (among other crash types as well). Braking is assumed for forward collision warning (FCW) and automatic emergency braking (AEB) systems. Braking is also used for adaptive cruise control (ACC) and in automated driving systems more generally. However, steering may be advised in an emergency if the adjacent lane is clear and braking is unlikely to avoid a collision. Steering around an obstacle when feasible also eliminates the risk of becoming the new forward collision hazard. Driver assist technology like emergency steer assist (ESA) …

Video Stream Adaptation In Computer Vision Systems, Yousef Sharrab Sharrab

Wayne State University Dissertations

Computer Vision (CV) has been deployed recently in a wide range of applications, including surveillance and automotive industries. According to a recent report, the market for CV technologies will grow to $33.3 billion by 2019. Surveillance and automotive industries share over 20% of this market. This dissertation considers the design of real-time CV systems with live video streaming, especially those over wireless and mobile networks. Such systems include video cameras/sensors and monitoring stations. The cameras should adapt their captured videos based on the events and/or available resources and time requirement. The monitoring station receives video streams from all cameras and …

Mri Methods For Imaging The Feto-Placental Vasculature And Blood, Uday Krishnamurthy

Wayne State University Dissertations

Fetal magnetic resonance imaging (MRI) in recent times has become a well-established adjunct to ultrasound (US) in routine clinical prenatal care and diagnostics. The majority of fetal MRI is restricted to T2-weighted scans, where the diagnosis is based on the appearance of normal and abnormal tissue. Although there have been many advancements in MRI and a plethora of sequences, that probe different anatomical and different physiological process, the adaptation of these in fetal imaging has been rather slow. Many of these can extract quantitative parameters that can throw light on the underlying tissue’s normal/patho-physiology. But the use of such quantitative …

An Effective Methodology For Suppressing Structure-Borne Sound Radiation, Lingguang Chen

Wayne State University Dissertations

ABSTRACT

AN EFFECTIVE METHODOLOGY FOR SUPPRESSING

STRUCTURE-BORNE SOUND RADIATION

by

LINGGUANG CHEN

December 2017

Advisor: Dr. Sean F. Wu

Major: Mechanical Engineering

Degree: Doctor of Philosophy

This dissertation is primarily concerned with the development of an effective methodology for reducing structure-borne sound radiation from an arbitrarily shaped vibrating structure. There are three major aspects that separate the present methodology from all the previous ones. Firstly, it is a non-contact and non-invasive approach, which is applicable to a class of vibrating structures encountered in engineering applications. Secondly, the input data consists of a combined normal surface velocity distribution on a portion …

An Enhanced Nerve Conduit Combined With Exercise To Improve Functional Recovery After Peripheral Nerve Injury, Tonya Jo Whitehead

Wayne State University Dissertations

Peripheral nerve injuries affect millions of people each year around the world. Current treatments include an autograft, the gold standard, and commercially available nerve growth conduits (NGC). Autografts have several drawbacks including donor site morbidity and nerve size mismatch, which leads to incomplete recovery. Commercial NGCs can help with recovery but do not contain any specific cues to guide nerve regeneration. This thesis first evaluated mechanical, topographical and chemical cues that can be included in a NGC to promote and direct nerve regeneration. To incorporate all of the cues, a compliant substrate methacrylated hyaluronic acid (MeHA, mechanical cue) is electrospun …

Biomaterials Approaches For Utilizing The Regenerative Potential Of The Peripheral Nerve Injury Microenvironment, Melissa Renee Wrobel

Wayne State University Dissertations

Clinically available treatments are insufficient to achieve full functional recovery in large (>3cm) peripheral nerve injuries (PNI). The objectives in this thesis were 1) to study often overlooked elements of intrinsic PNI repair including release of inhibitory CSPGs and post-injury responses of inflammatory macrophages and dedifferentiated Schwann cells; 2) to create biomaterial scaf-folds featuring topographical and adhesive cues to enhance neurite outgrowth; and 3) to test the ability of those cues to direct macrophages and Schwann cells towards a pro-regenerative phe-notype. It is hypothesized that recapitulating the positive and negative cues of the PNI microenvi-ronment can better improve regeneration. …

Utility Of Ultrasound/Photoacoustic Imaging For Accurate Catheter Tracking And Temperature Monitoring During Endovenous Laser Ablation, Ayushi Jharia, Keerthana Palani, Yan Yan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

Laser ablation is a treatment method that uses light energy through a catheter inserted into a vein to induce localized heat to close the diseased blood vessels. Ultrasound (US) imaging has been used for catheter visualization and tracking. US has limitations for tracking the accurate location of the fiber tip inside small perforating veins such as angular dependency and comet tail artifacts. We propose a robust and accurate method for fiber tip tracking using combined US and Photoacoustic (PA) imaging to overcome the existing limitations.

Integrative Pathway Analysis Pipeline For Mirna And Mrna Data, Diana Mabel Diaz Herrera

Wayne State University Theses

The identification of pathways that are involved in a particular phenotype helps us understand the underlying biological processes. Traditional pathway analysis techniques aim to infer the impact on individual pathways using only mRNA levels. However, recent studies showed that gene expression alone is unable to capture the whole picture of biological phenomena. At the same time, MicroRNAs (miRNAs) are newly discovered gene regulators that have shown to play an important role in diagnosis, and prognosis for different types of diseases. Current pathway analysis techniques do not take miRNAs into consideration. In this project, we investigate the effect of integrating miRNA …

Turbulent Spray Combustion Modeling Using Direct Integration Of Chemistry And Flamelet Generated Manifolds, Ashraya Goyal

Wayne State University Theses

Turbulent spray combustion of n-dodecane was modeled at engine relevant conditions using various combustion models (Direct Integration of Chemistry and Flamelet Generated Manifolds) and turbulence models (Dynamic Structure Large Eddy Simulation and RNG Reynolds-Averaged Naiver-Stokes). A recently developed n-dodecane mechanism was utilized and the turbulent spray was simulated at various combustion chamber initial gas temperature and pressure conditions. Mesh with size of 31 microns was utilized to resolve small eddies around the spray. The pressure-based ignition delay, flame lift-off length, and spray and jet penetrations were studied and compared with experimental measurements. The Direct Integration of Chemistry and Flamelet Generated …

Analysis Of Cross-Layer Optimization Of Facial Recognition In Automated Video Surveillance, Loren Garavaglia

Wayne State University Theses

Interest in automated video surveillance systems has grown dramatically and with that so too has research on the topic. Recent approaches have begun addressing the issues of scalability and cost. One method aimed to utilize cross-layer information for adjusting bandwidth allocated to each video source. Work on this topic focused on using distortion and accuracy for face detection as an adjustment metric, utilizing older, less efficient codecs. The framework was shown to increase accuracy in face detection by interpreting dynamic network conditions in order to manage application rates and transmission opportunities for video sources with the added benefit of reducing …

A New Centering Table For Encapsulated Glass Positioning, Chongyang Li

Wayne State University Theses

With the progress of the society, people`s living standard is increasing. More and more cars (more than 72 million) are produced and utilized all over the world. This makes a large number of quarter windows which located on the back-side window of a vehicle are urgently needed. Encapsulated glass is widely adopted for a quarter window for various advantages. Positioning by centering table is one of the most important procedures during the fabrication of encapsulated glass for the quarter window. The existing centering table has a lot of disadvantages such as poor flexibility and precision, which results in failure in …

Monte-Carlo-Simulation-Based, Product-Quality-Focused Analysis Of Nanocoating Curing And Post Curing Process, Jianming Zhao

Wayne State University Theses

ABSTRACT

MONTE CARLO SIMULATION BASED

PRODUCT QUALITY ANALYSIS OF

POLYMER COATING CURING AND POST CURING

By

Jianming Zhao

May 2017

Advisor：Dr. Yinlun Huang

Major: Chemical Engineering

Degree: Master of Science

To achieve better property of polymer coatings, different categories of nanoparticles are applied before coating’s curing process. However, one of the adverse effects is the change of final property, which leads the difficulty of product quality control. Using mathematical modeling method can actually improve the cost and time to get a prediction of product quality. Still now, different series of models are developed for various purposes. For example, Monte-Carlo simulation …

Dynamic Rabi Oscillations In A Quantum Dot Embedded In A Nanobridge In The Presence Of Surface Acoustic Waves, Lev Mourokh, Achim Wixforth, Florian Beil, Max Bichler, Werner Wegscheider, Robert H. Blick

Publications and Research

A quantum dot is created within a suspended nanobridge containing a two-dimensional electron gas. The electron current through this dot exhibits well-pronounced Coulomb blockade oscillations. When surface acoustic waves (SAW) are driven through the nanobridge, Coulomb blockade peaks are shifted. To explain this feature, we derive the expressions for the quantum dot level populations and electron currents through these levels and show that SAW-induced Rabi oscillations lead to the observed phenomenology.

A Comparative Analysis Of Furniture Dowel Joint Strength Among Various Dowel Styles, Taylor C. Fatheree

Undergraduate Honors Theses

This study examines the effectiveness of various dowels used in furniture joints. Using multiple linear regression, it examines the interaction between dowel penetration depth and surface treatment. Two commercially available surface treatments, fluted cut and spiral cut, were tested against a smooth home-made dowel. Through the bending tests, it was found that depth of penetration had a positive effect on the joint strength. Additionally, home-made dowels were significantly better than both fluted and spiral in softwood tests, and the home-made and the spiral were significantly better than the fluted in the hardwood tests.

Increasing Efficiency In The Construction Industry And Construction Management Classrooms Using Computer Software, Tina T. Bien

Undergraduate Honors Theses

The purpose of this research is to identify the best computer software programs that are the most effective within the construction industry. Companies are gradually shifting from manual practices to various software and technologies to optimize business and communication efficiency. With the plethora of software available, the industry does not fully understand which software are the most effective for addressing the challenges of the industry. As the industry is struggling with integrating these software into their company structure, more money is being spent to tackle the challenges that face the construction industry today. Companies that do not integrate construction technology …

Characterizing Effects Of Nitric Oxide Sterilization On Tert-Butyl Acrylate Shape Memory Polymers, Ben Phillippi

Theses - ALL

As research into the potential uses of shape memory polymers (SMPs) as implantable medical devices continues to grow and expand, so does the need for an accurate and reliable sterilization mechanism. The ability of an SMP to precisely undergo a programmed shape change will define its ability to accomplish a therapeutic task. To ensure proper execution of the in vivo shape change, the sterilization process must not negatively affect the shape memory behavior of the material. To address this need, this thesis investigates the effectiveness of a benchtop nitric oxide (NOx) sterilization process and the extent to which the process …

Nanoparticle-Induced Unusual Melting And Solidification Behaviours Of Metals, C. Ma, Lianyi Chen, C. Cao, X.C. Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Thermal Analysis Of 3d Printed 420 Stainless Steel, Adithya Pothuri

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing opens new possibilities in the manufacturing industry. 3D printing is a form of additive manufacturing. 3D printers will have a significant influence over the industrial market, with extremely positive effects in no time. The main aim of this research is to determine the effect of process parameters of Binder Jet manufactured 420 Stainless Steel (420SS) parts on thermal properties such as thermal conductivity. Different parameters, such as layer thickness, sintering time and sintering temperature were varied. A full factorial design of experiment matrix was made by varying these parameters using two levels. Testing showed that different parameters affected …

Photocatalytic Decomposition Of Phenol Under Visible And Uv Light Utilizing Titanium Dioxide Based Catalysts, Marjorie G. Steiner

Honors Theses and Capstones

Pollution in wastewater effluvia from phenol and phenolic compounds is a common occurrence in many industrial manufacturing plants. Phenol is toxic to human beings as well as a contaminant to the environment, meanwhile, it is difficult to remove from wastewater due to its non-biodegradable nature. To boost the rate of decomposition, various catalytic approaches have been developed. With the interest of decreasing operation cost, titanium dioxide (TiO₂) based catalysts have emerged as good candidates for the photocatalytic process.

In this honors project, a series of TiO₂ based catalysts, including TiO₂, N-TiO₂, Cu-TiO_{2 …}

Sensor Characterization And Signal Fusion For Instanteye, Wyman T. Smith

Honors Theses and Capstones

The practicality and effectiveness of using a TerraRanger Duo—a parallel sonar and infrared time-of-flight distance sensor—payload for obstacle detection is investigated for use with Physical Science Inc.’s InstantEye drone. A Python program was developed to interface with the serial data output before comparing the sensor’s empirical performance against its data sheet. The two signals from the distinct sensor modules, each with their characterized strengths and weaknesses, were then fused with a Kalman filter. This was further refined by imposing conditional weighting based on the known sensor characteristics. The filter output, with conditional corrections, was able to accurately track a single …

Sensitivity Analysis Method To Address User Disparities In The Analytic Hierarchy Process, Marie Ivanco, Gene Hou, Jennifer Michaeli

Mechanical & Aerospace Engineering Faculty Publications

Decision makers often face complex problems, which can seldom be addressed well without the use of structured analytical models. Mathematical models have been developed to streamline and facilitate decision making activities, and among these, the Analytic Hierarchy Process (AHP) constitutes one of the most utilized multi-criteria decision analysis methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of addressing user profile disparities. A novel sensitivity analysis method based on local partial derivatives is presented here to address these limitations. This new methodology informs AHP users of which pairwise comparisons most impact the derived …

Implementing Peer-Review Activities For Engineering Writing Assignments, Stacie I. Ringleb, Orlando M. Ayala, Jennifer Kidd

Mechanical & Aerospace Engineering Faculty Publications

Professional engineers spend a considerable portion of their day writing, yet disciplinary writing skills are not addressed in many engineering courses. This study investigates peer review as a mean to enhance student writing in engineering courses. Students completed formative peer reviews using an online peer review system for a group project in a fluid mechanics course (with online and face-to-face sections) and for an individual writing assignment in a senior capstone class in mechanical engineering. A university-wide rubric for disciplinary writing was used to assess student writing performance on interim and final assignments completed over the course of a semester. …

Smart Ev Charging For Improved Sustainable Mobility, Ashutosh Shivakumar

Browse all Theses and Dissertations

The landscape of energy generation and utilization is witnessing an unprecedented change. We are at the threshold of a major shift in electricity generation from utilization of conventional sources of energy like coal to sustainable and renewable sources of energy like solar and wind. On the other hand, electricity consumption, especially in the field of transportation, due to advancements in the field of battery research and exponential technologies like vehicle telematics, is seeing a shift from carbon based to Lithium based fuel. Encouraged by 1. Decrease in the cost of Li – ion based batteries 2. Breakthroughs in battery chemistry …