Engineering Commons^™

Design Of An Opposed-Piston, Opposed-Stroke Diesel Engine For Use In Utility Aircraft, Luke Kozal

Honors Theses

The objective of this thesis was to determine the feasibility of using an opposed-piston, opposed-stroke, diesel engine in utility aircraft. Utility aircraft are aircraft that have a maximal takeoff weight of 12,500lbs. These aircraft are often used for transportation of cargo and other goods. In order to handle that weight, many of the aircraft are powered by turboprop engines. Turboprop engines are a style of jet engine with power capabilities ranging from 500 to several thousand horsepower (hp). They are expensive engines, and in the case of the Piper Mirage, substituting the piston engine with a turboprop engine can increase …

Development Of An Effective Portable And Flexible Glove For Hand Tremor Suppression, Abdulrahem Turkistani

Masters Theses

This paper presents the work carried out in designing and developing a prototype for a tremor suppression system that reduces hand tremor by counteracting vibrations initiated from a patient’s shaking hand. This system includes a glove with a built-in vibration simulation module that oscillates and mimics the hand vibration. The oscillation is generated by a DC motor mounted on the top of the glove, and can vary in degree of vibration. The glove is also equipped with an accelerometer-gyroscope based micro-electromechanical system (MEMS) and vibrating coin motors mounted on each finger, both interfaced with a microcontroller. The microcontroller used in …

Superpositioning High Power Lasers For Mid-Air Image Formations, Auston Viotto

UCARE: Research Products

This research evaluates different methods to create voxels, 3-dimensional pixels, in air without the need for special glasses or reflections off of surfaces. Research on the advantages of superimposing or the culmination, focusing, of laser light will be conducted. The point of superpositioning/culmination will be evaluated by the brightness of the voxel due to the Rayleigh Scatter Effect. The voxel’s brightness is dependent on the laser output strength and inversely proportional to its wavelength. Once a superimposed/culminated voxel has been created in the lab the next step will be to manipulate the location of the voxel through 3-dimensional space. This …

Survey Of Branch Prediction, Pipelining, Memory Systems As Related To Computer Architecture, Kristina Landen

Student Works

This paper is a survey of topics introduced in Computer Engineering Course CEC470: Computer Architecture (CEC470). The topics covered in this paper provide much more depth than what was provided in CEC470, in addition to exploring new concepts not touched on in the course. Topics presented include branch prediction, pipelining, registers, memory, and the operating system, as well as some general design considerations for computer architecture as a whole.

The design considerations explored include a discussion on different types of instruction types specific to the ARM Instruction Set Architecture, known as ARM and Thumb, as well as an exploration of …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Mentoring Brochure: Shorter Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

We made these brochures to talk to different organizations about our thoughts and ideas. There are two iterations of this. This one has less words.

Sustainability Survey, Dayton Regional Green Member Businesses, 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document is a sustainability and sharing survey intended for businesses that are Dayton Regional Green members. Dayton Regional Green already has an extensive survey. This survey tries to avoid redundancy in surveys by asking other questions not included in DRG3's survey. It asks questions regarding mentoring, sharing, local sourcing, and sustainability.

Sustainability Survey, Dayton Regional Green Nonmember Businesses, 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document is a sustainability and sharing survey intended for businesses that are not already Dayton Regional Green members. This survey includes questions similar to what is in DRG3's survey. It asks questions regarding mentoring, sharing, local sourcing, energy, waste streams, and sustainability.

Team Meeting Minutes, January-April 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document provides notes from meetings with several Dayton-area community leaders. Several ideas that make Dayton more community-oriented and material-efficient are discussed.

Hackathon 2017 Project: Resource-Sharing Website, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

Our team was given the opportunity to pitch a concept to students attending UD’s Hackathon event on Febraury 22, 2017. One group took on the project and created the framework for a website that could be used for business connectivity and sharing. This document spells out the major takeaways from the project.

Reverse Hyperextension Device, Nayeli Feregrino, Aziz Alotaibi, Gage Becker, Kyle Brown, Dillon Fleming

Paper and Posters Presentations

The Reverse Hyperextension Device is an exercise device typically used to aid in the recovery of those with lower back problems. Its main use is to substitute squats for those who cannot sustain the strain that comes with doing regular squats. A typical Reverse Hyperextension device is a bulky and immovable device, which poses a problem if the placement area has limited space. With our innovative design, the device will be foldable so it can be stored away when not in use and still as stable as needed to serve its purpose without causing injury. Another benefit coming from the …

How Tonality And Loudness Of Noise Relate To Annoyance And Task Performance” Noise Control Eng. J. 65(2), 71-82., Joonhee Lee, Jennifer M. Francis, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Audible tones in noise generated by building mechanical equipment can be a leading cause of complaints from occupants. A number of metrics have been developed to quantify prominence of a tone, but previous work has shown that the impact of a certain tonality appears to vary with the level of the broadband noise signal. More work on how tonal signals of varying tonality, tone frequency and broadband noise levels relate to annoyance and task performance is needed. This paper investigates such relationships between current noise metrics, annoyance and task performance under assorted tonal noise conditions through subjective testing. Participants rated …

Semicoupled Modeling Of Interaction Between Deformable Tires And Pavements, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The interaction between deformable tires and pavements was studied using finite-element modeling and a semicoupled approach. Three finite-element models were used: (1) a hyperelastic tire rolling on an infinitely rigid surface; (2) a three-dimensional pavement model; and (3) a hyperelastic tire rolling on a deformable viscoelastic body. The tire and pavement models have been successfully compared with experimental measurements. Tire interaction with a rigid surface provided contact stresses to excite the pavement model, and results of the pavement model defined the boundary conditions of the tire rolling on the deformable body. After that, the pavement loaded with the contact stresses …

The Design And Implementation Of A Pcie-Based Less Label Switch, Amy C. Williams

Senior Honors Theses

With the explosion of the Internet of Things, the number of smart, embedded devices has grown exponentially in the last decade, with growth projected at a commiserate rate. These devices create strain on the existing infrastructure of the Internet, creating challenges with scalability of routing tables and reliability of packet delivery. Various schemes based on Location-Based Forwarding and ID-based routing have been proposed to solve the aforementioned problems, but thus far, no solution has completely been achieved. This thesis seeks to improve current proposed LORIF routers by designing, implementing, and testing and a PCIe-based LESS switch to process unrouteable packets …

Energy–Water Reduction And Wastewater Reclamation In A Fluid Milk Processing Facility, Carly Rain Adams, Yulie E. Meneses, Bing Wang, Curtis L. Weller

Department of Food Science and Technology: Dissertations, Theses, and Student Research

The energy-water nexus is the inseparable connection linking water and energy. We are faced with a unique opportunity to co-manage these resources, as conservation of one is directly linked to the conservation of its counterpart. Therefore, immediately facing this critical challenge, will lead to tangible impacts on the water and energy crisis our food system is faced with. Determining the role of water and energy in the food industry has proved to be the starting point for reducing the distance between process productivity and resource efficiency. Therefore, this research focuses on determining opportunities for water-energy optimization and wastewater reduction and …

Investigation Of Petroleum Use In Off-Road Agricultural Machinery And Analysis Of J1939 Controller Area Network (Can) Data For Advanced Machinery Testing, Rodney Rohrer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Nearly all modern off-road agricultural machinery are powered by petroleum, primarily diesel fuel. Equipment manufacturers work to improve fuel efficiency of their equipment to provide better value to their customers. Benefits of reducing petroleum use include lower operating costs, improved operational efficiency, improved energy security, and environmental benefits. Agricultural tractor testing focuses primarily on characterizing maximum performance but there is a need for advanced test procedures to better measure fuel efficiency for load cases representative of in-field operations. This would help farmers make better equipment purchasing and utilization decisions and help manufacturers quantify efficiency improvements; ultimately driving continued progress toward …

Developing An Imaging Biomarker To Detect Aberrant Brain Connectivity In Individual Patients, Esther Cox

Master's Theses (2009 -)

Resting state functional MRI (rsfMRI) has been proven to be a valuable tool in clinical applications such as pre-surgical mapping, but there is not yet a functional and usable algorithm that can be used by physicians in a clinical setting to evaluate an individual patient for diseases and aberrant brain connectivity. If a physician wants to evaluate a patient in this way, the rsfMRI data must be looked at “by hand,” i.e. the physician must manually evaluate the data and identify the functional ICN’s and whether they are normal or aberrant. An algorithm that would automate this process and supplement …

Java Server Reliability In The Presence Of Failures, Rich Coe

Master's Theses (2009 -)

A design for the separation of a server interface and work processing. Numerous sources, Tanenbaum (Tanenbaum Modern Operating Systems, 493), Goscinski (Goscinski Distributed operating systems, 203), and Birman (Birman Reliable distributed systems, 265), all discuss the concept of Two-Phase Commit, where a coordinator directs one or more processes to perform a transaction. If the transaction or any of the processes fail, the coordinator can decide how to proceed by either retrying or aborting the request. The popular web browser Chrome utilizes a separate process for each tab displayed. Should the rendering and display of a web page cause a crash, …

Evaluating The Bond Behavior Between Frp And Grooved Concrete Specimens Using Single Shear Pull Out Test, John Omboko

Master's Theses (2009 -)

Surface preparation affects the bond behavior between Fiber Reinforcing Polymer (FRP) composite material and concrete. In this research, a special type of surface preparation known as grooving, which involves cutting transverse grooves, is conducted on concrete blocks (specimens) that are categorized as either Unfilled (U) or Filled (F). This idea is to ascertain how the grooves affect the strength of FRP-bonded-concrete specimen. These two categories are then benchmarked to control (C) specimens which do not have grooves on them. Category U specimens only have the epoxy applied on the concrete surface while category F specimens have epoxy applied on both …

Biosolids-Derived Biochar For Micropollutant Removal From Wastewater, Lee Kimbell

Master's Theses (2009 -)

Trace organic compounds including antibiotics, hormones, pharmaceuticals and personal care products are discharged to the environment with liquid and solid effluent streams from water resource recovery facilities. These compounds are referred to as micropollutants, and can have negative impacts in receiving waters. Current wastewater treatment processes are not specifically designed to remove micropollutants, and many of these compounds are recalcitrant to conventional treatment technologies. Triclosan (TCS) was selected as a representative micropollutant in this study due to frequent detection in liquid effluents, residual biosolids, and surface waters. Pyrolysis - the thermochemical decomposition of organic matter at elevated temperatures in the …

Full-Scale Pavement Testing Of Aggregate Base Material Stabilized With Triaxial Geogrid, Shaun Todd Hilton

Theses and Dissertations

The objective of this research was to investigate the structural capacity of aggregate base materials stabilized with triaxial geogrid placed in a full-scale pavement involving control, or unstabilized, sections. Field testing was performed on a roadway in northeastern Utah that was 16 km (10 miles) long and included 10 test sections, seven stabilized sections and three control sections, each having five test locations. The pavement structure was comprised of a hot mix asphalt layer overlying an untreated aggregate base layer of varying thickness, depending on the test section. Except for the control sections, one or two layers of geogrid were …

Non-Dimensional Modeling Of The Effects Of Weld Parameters On Peak Temperature And Cooling Rate In Friction Stir Welding, Bryan Jay Stringham

Theses and Dissertations

Methods for predicting weld properties based on welding parameters are needed in friction stir welding (FSW). FSW is a joining process in which the resulting properties depend on the thermal cycle of the weld. Buckingham's Pi theorem and heat transfer analysis was used to identify dimensionless parameters relevant to the FSW process. Experimental data from Al 7075 and HSLA-65 on five different backing plate materials and a wide range of travel speeds and weld powers was used to create a dimensionless, empirical model relating critical weld parameters to the peak temperature rise and cooling rate of the weld. The models …

Selecting Surrogate Folds For Use In Origami-Based Mechanisms And Products, Jason Tyler Allen

Theses and Dissertations

Origami-based design is increasing in popularity as its benefits and advantages become better understood and explored. However, many opportunities still exist for the application of origami principles to engineered designs, especially in the use of non-paper, thick sheet materials. One specific area utilizing thick sheet materials that is especially promising is origami-based mechanisms that require electrical power transfer applications. Many of these opportunities can be met by the use of surrogate folds. This thesis provides methods and frameworks that can be used by engineers to efficiently select and design surrogate folds for use in origami-based mechanisms and products. Surrogate folds …

Strut-And-Tie Modeling Of Multistory, Partially-Grouted, Concrete Masonry Shear Walls With Openings, Jeffrey Ryan Buxton

Theses and Dissertations

Construction practices are constantly evolving in order to adapt to physical locations and economic conditions. These adaptations may result in more cost-effective designs, but may also come at a cost of strength. In masonry shear walls, it is becoming more common to reduce the amount of grouting from every cell to only those with reinforcement, a practice known as partial-grouting. Partially-grouted masonry responds differently and in a more complex matter to lateral loads as compared to fully-grouted masonry. The response is made even more complex by wall discontinuities in the form of openings. The main objective of this study is …

Estimating Short-Term Human Intent For Physical Human-Robot Co-Manipulation, Eric Christopher Townsend

Theses and Dissertations

Robots are increasingly becoming safer and more capable. In the past, the main applications for robots have been in manufacturing, where they perform repetitive, highly accurate tasks with physical barriers that separate them from people. They have also been used in space exploration where people are not around. Due to improvements in sensors, algorithms, and design, robots are beginning to be used in other applications like materials handling, healthcare, and agriculture and will one day be ubiquitous. For this to be possible, they will need to be able to function safely in unmodelled and dynamic environments. This is especially true …

The Effect Of Transit-Oriented Development Siteson Residential Home Pricing, Bradley S. Randall

Theses and Dissertations

For a number of years residential and commercial development has grown surrounding railways stations in many cities across the United States. One of the trends that has occurred in a number of cities relates to positive property value correlations between real estate values near transit stations and transit-oriented development (TOD) sites as compared to their counterparts not located near a railway station or freeway access. Many cities have noted that homeowners are willing to pay more to be near a TOD site and being near a site can represent a statistically significant factor in determining where to purchase a property. …

Structural Lightweight Grout Mixture Design, Hannah Jean Polanco

Theses and Dissertations

This research focused on designing a grout mixture using lightweight aggregate that achieves the minimum 28-day compressive strength required for normal-weight grout, 2000 psi. This research specifically studied the effects of aggregate proportion, slump, and aggregate soaking on the compressive strength of the mixture. The variable ranges investigated were 3-4.75 parts aggregate to cement volumetrically, 8-11 in. slump, and 0 and 2 cycles of soaking. The statistical model developed to analyze the significance of variable effects included a three-way interaction between the explanatory variables. All three explanatory variables had a statistically significant effect on the grout compressive strength, but the …

Seismic Analysis Of And Provisions For Dry-Stack Concrete Masonry Wall Systems With Surface Bond In Low-Rise Buildings, Joseph G. Eixenberger

Theses and Dissertations

Masonry is one of the oldest forms of construction materials that is still in use today. However, construction practices in the modern age demand faster and more economical practices. Dry-stack masonry, or masonry that doesn't use mortar to bind the blocks together, is a unique system to make masonry more economical. Though several systems of dry-stack masonry have been suggested little to no data exists as most of these systems are patented. This research used dry-stacked normal weight concrete masonry units with an eccentrically placed reinforcement. The wall system is connected through a surface bond and lacks any geometric connection. …