Engineering Commons^™

Design And Test Of 3d Printed Lenses For Sub-Thz Radiation, Justin Patterson

Maseeh Summer Undergraduate Research Experience

The terahertz gap in the electromagnetic spectrum provides promising advantages for applications such as increased airport security and medical diagnosis. Quasi-optical systems used to study THz radiation require multiple mirrors or lenses, which can be quite costly. In order to manipulate THz beams we investigated production of inexpensive lenses using additive 3D printing. 3D printing technology promises to be not only accessible and inexpensive, but should also enable quick experimentation with different lens designs. The Picometrix time-domain spectroscopy (TDS) system was used to characterize 3D printable plastics. The absorption coefficient and refractive index were analyzed from 0.2 to 2 THz …

The Effect Of Plasma On Graphene Quality In An Inductively Couple Plasma Chemical Vapor Deposition Reactor, Brendan Coyne

Maseeh Summer Undergraduate Research Experience

Despite continued interest in research and application development, full scale graphene production is still limited by many factors including prohibitively high growth temperature requirements. Extremely high quality graphene growth is possible at high temperatures using chemical vapor deposition (CVD). Use of an inductively coupled plasma chemical vapor deposition (ICP CVD) reactor with the benefit of precursor gas decomposition through plasma generation, may provide possibility to reduce growth temperature. Herein, we report plasma’s effects on graphene growth by comparing growths of increasing power supplied to plasma generation and changes in precursor gas ratios. Plasma composition was characterized by ultraviolet and visible …

Conditional Averaging And Classification In The Near Wake Of A Wind Turbine Array Boundary Layer, Sarah E. Smith

Maseeh Summer Undergraduate Research Experience

Flow perturbation induced by interaction with a turbine rotor produces considerable turbulence which can alter the productivity of subsequent units within a wind farm. Previous methods have characterized near wake vorticity of a single turbine as well as recovery distance for various turbine array configurations. This study aims to build from previous methods of analysis from the perspective of the rotor well within a turbine array and develop a model to examine points of significant imposition in relation to rotational effects. Hot wire anemometry was employed downstream of a turbine located in the middle of the third row in a …

Faculty Perceptions Of Student Recruitment And Retention In Stem Fields, Eshani Gandhi-Lee, Heather Skaza, Erica Marti, Peter G. Schrader, Marykay Orgill

Civil and Environmental Engineering and Construction Faculty Research

According to the President's Council of Advisors on Science and Technology (PCAST, 2012), there is a need to produce one million more STEM (Science, Technology, Engineering, and Mathematics) graduates in the U.S. over the next decade. Thus, more students must be recruited into and retained in STEM degrees of study. Because faculty are considered influential in students' choices to pursue and remain in STEM disciplines, we interviewed university STEM faculty in order to identify their perceptions of student recruitment and retention in STEM fields. Our data indicate that faculty are generally unaware of or not worried about the need to …

Letter To The Members Of The Georgia Academy Of Science, David L. Bechler

Georgia Journal of Science

This letter is an update and review of recent activities in the Georgia Journal of Science. As of 2016, the journal has gone from a hardcopy format to a digital format through Digital Commons/Bepress (http://digitalcommons.gaacademy.org/gjs/). As a result of this, individuals worldwide now have access to journal articles free and online. Manuscripts accepted for publication are now placed online after the final acceptance and editing is complete.

A review on 20 March 2017 of online download events involving publications in 2016 shows that, of the 21 publications (the annual meeting program was included as one publication), there were …

Workshop 1c: Student Presentation: Decision-Making Swarms, Xinyu Guan, Andriy Sheptunov, Nicholas Nusgart, George Jeno

IMSAloquium Student Investigation Showcase

While swarms that execute decisions are well known in the swarm community, swarms that exhibit this capability a priori have never before been achieved. We demonstrate a methodology, based on the Hamiltonian method of swarm design, that enables the design and implementation of swarms that exhibit decision-making capability. We develop the theoretical structure of the method and apply it to the development of an ant algorithm and a swarm capable of deciding whether its density exceeds a specific predetermined value. The swarm designs are validated in simulation.

Implementing Delay-Tolerant Networking At Morehead State University, Nathaniel J. Richard

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Nathaniel J. Richard on April 28, 2017.

Estimation Of Localized Ideal Oximetry Sensor Lag Via Oxygen Desaturation-Disordered Breathing Event Cross-Correlation, Brian Snider, A Kain

Faculty Publications - Department of Electrical Engineering and Computer Science

In previous work, we attempted to identify events using sensor data from full-night polysomnography studies using a global 20-second oximetry sensor lag across all studies. However, we observed that oxygen desaturation onset trailed the corresponding human expert-labeled events by varying amounts of time, even within the same study. In this work, we estimate the localized ideal oximetry (SpO₂) sensor lag using the cross-correlation between the labeled disordered breathing event and the observed desaturation.

Analysis Of Tool Wear And Tool Life Of Cutting Tool Inserts Using Statistical Process Control Charts: A Case Study, Evan R. Ferrell

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Evan R. Ferrell on April 28, 2017.

Decision Making Swarms, Sanza Kazadi, George Jeno '17, Xinyu Guan '17, Nick Nusgart '17, Andriy Sheptunov '17

Student Publications & Research

While swarms that execute decisions are well known in the swarm community, swarms that exhibit this capability a pri- ori have never before been achieved. We demonstrate a methodology, based on the Hamiltonian method of swarm design, that enables the design and implementation of swarms that exhibit decision-making capability. We develop the the- oretical structure of the method and apply it to the develop- ment of an ant algorithm and a swarm capable of deciding whether its density exceeds a specific predetermined value. The swarm designs are validated in simulation.

Flying Simple Experiments In Space, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Flying Simple Experiments in Space" from April 28, 2017.

Novel Composites Between Nano-Structured Nickel Sulfides And Three-Dimensional Graphene For High Performance Supercapacitors, Xiaomin Wang, Huanglin Dou, Zhen Tian, Jiujun Zhang

Journal of Electrochemistry

In this paper, a three-dimensional graphene (3DG) network grown on nickel foam was employed as a template for synthesizing graphene-based composite materials of supercapacitor electrode. The composites (crystal Ni₃S₂ nanorods on the surface of 3DG (abbreviated as Ni₃S₂/3DG)) were obtained through a one-step hydrothermal reaction. The morphological and structural evolution of the Ni₃S₂/3DG composites were investigated by SEM, TEM, XRD and Raman spectroscopy. Detailed electrochemical characterization showed that the Ni₃S₂/3DG-coated electrodes exhibited both a specific capacitance as high as 1825 F·g^-1 at 5 mV·s …

Designing Pt-Skin Of Pt-Based Bimetallic Electrocatalysts For Oxygen Reduction Reaction, Binwei Zhang, Yunxiao Wang, Yanfei Xu, Huakun Liu, Shixue Dou

Journal of Electrochemistry

In the past decade, great advancement has been made in the development of nanocatalysts for energy conversion and storage. Pt-skin of Pt-based bimetallic has shown a great potential in the tuning the electronic structures of electrocatalytically active materials toward oxygen reduction reaction. Here, we offer a brief overview of the recent research on the design and preparation of catalysts. Our focus is paid on the systematic studies of preparation and performance of Pt-skin catalysts towards oxygen reduction reaction.

Recent Progress In Template-Assisted Synthesis Of Nitrogen-Doped Porous Carbons For Oxygen Electroreduction, Wenhan Niu, Ligui Li, Shaowei Chen

Journal of Electrochemistry

Nitrogen (N)-doped porous carbons are potential alternatives to precious metal catalysts for oxygen reduction reaction (ORR) at the cathodes of proton exchange membrane fuel cells and metal-air batteries. Template-assisted synthesis has been used extensively as a robust and versatile method in the preparation of such carbon catalysts, where the ORR activity has been found to be dependent on various structural parameters, such as the concentrations and molecular configurations of the dopants, and the porosity, surface accessibility and electrical conductivity of the carbon materials. In this review, we summarize recent progress in this area of research focusing on the design, preparation …

Reconstruction Of Distributions Of Nanoparticles Or Electroactive Nano-Components In Electrochemical Arrays Based On Chronoamperometric Data, Alexander Oleinick, Oleksii Sliusarenko, Irina Svir, Christian Amatore

Journal of Electrochemistry

The main scope of this work was to elaborate and test a simple mathematical and numerical procedure for reconstructing the probability density distributions f(ρ) characterizing the distribution of electroactive or electrocatalytic nano-components present or deposited on the electrochemically-inert surface of a planar conductor based on the time-dependent chronoamperometric responses of the corresponding electrochemical array. The mathematical and numerical validity of the procedure was established for three types of arrays (one periodical, two involving random dispersions) involving near-spherical nano-components dispersed on a flat surface. Indeed, altogether, these three types represent most 2D-experimental electrochemical nano-arrays used for analytical or electrocatalytic purposes. This …

Comparative Studies Of Fe, Ni, Co And Their Bimetallic Nanoparticles For Electrochemical Water Oxidation, Maduraiveeran Govindhan, Brennan Mao, Aicheng Chen

Journal of Electrochemistry

The design of efficient, durable, and earth-abundant electrocatalysts via environmentally compatible strategies for the oxygen evolution reaction (OER) is a vital for energy conversion processes. Herein we report a facile approach for the fabrication of low-cost and earth abundant metal catalysts, including iron (Fe), nickel (Ni), cobalt (Co), CoNi, and CoFe nanoparticles (NPs) on titanium (Ti) substrates through a one-step electrochemical deposition. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) spectrocopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques were employed to characterize these nanoparticles. Our electrochemical results revealed that among the five synthesized nanomaterials, the …

Resistive-Pulse Analysis Of Single Phospholipid Vesicles Using Quartz Nanochannels, Jonathan T. Cox, Bo Zhang

Journal of Electrochemistry

We report the uses of resistive-pulse method and quartz nanochannels for the detection and size analysis of single vesicles. Cylindrical shape quartz nanochannels have been used to detect single phospholipid vesicles ranging from 100 to 300 nm and polystyrene nanoparticles ranging from 170 to 400 nm in diameter. Translocations of single vesicles and nanoparticle were detected as individual square current pulses, which could be used to determine particle size. Our results show excellent agreement between the particle/vesicle sizes obtained from nanochannels and those from dynamic light scattering (DLS) and scanning electron microscopy (SEM). This electronic-based method was found to be …

Impact Of Nafion Loading And Anion Adsorption On The Synthesis Of Pt Monolayer Core-Shell Catalysts, Lijun Yang, Dustin Banham, Elod Gyenge, Siyu Ye

Journal of Electrochemistry

Carbon supported palladium (Pd) nanoparticles were used as a model core material for the synthesis of platinum (Pt) monolayer core-shell catalysts using rotating disk electrode method and a copper (Cu) under potential deposition technique. The impact of Nafion on the synthesis process was revealed by electrochemical testing with various Nafion contents. The existence of Nafion influenced the Cu under potential deposition, galvanic replacement and eventually the oxygen reduction reaction activity of the core-shell catalyst. However, as long as the Nafion content was less than 5 wt% in the test film, adding Nafion could help to bind catalyst onto the surface …

Comparison Of Oxygen Reduction Reaction Activity Of Pt-Alloy Nanocubes, Yongan Tang, Lin Dai, Shouzhong Zou

Journal of Electrochemistry

Alloying Pt with the first row non-noble transition metals has been demonstrated to increase the catalytic activity toward oxygen reduction reaction (ORR), which is the cathode reaction of the proton exchange membrane fuel cells (PEMFCs) and metal-air batteries. However, how much the ORR activity improvement comes from the alloying elements remains controversial. In this paper, the nanocubes of PtMn, PtFe, PtCo, and PtNi with the similar size and composition were prepared and their ORR activities were explored, in order to investigate the effects of alloying elements on the catalytic activity. The use of cubic shape particles minimizes the contribution to …

Rutile Tio2 Nanosheet Arrays Planted On Magnetron Sputtered Ti Metal Layers For Efficient Perovskite Solar Cells, Nang Zhang, Meidan Ye, Xiaoru Wen, Changjian Lin

Journal of Electrochemistry

In this work, vertical rutile titanium oxide (TiO₂) nanosheet arrays (NSAs) were firstly hydrothermally grown on the top of thin titanium (Ti) metal layers which were loaded on fluorine doped tin oxide (FTO) substrates by the DF magnetron sputtering deposition method. After an annealing post-treatment, the Ti metal layers were transformed into the compact TiO₂ layers with a strong connection between the rutile TiO₂ NSAs and the FTO substrates. For comparison, the rutile TiO₂ NSAs were similarly planted over two compact TiO₂ layers fabricated through atomic layer deposition (ALD) and spin coating (SC) methods, …

Electrodeposition Of Ruo2 Layers On Tio2 Nanotube Array Toward Co2 Electroreduction, Bei Jiang, Lina Zhang, Xianxian Qin, Wenbin Cai

Journal of Electrochemistry

RuO₂/TiO₂ composite materials have multitude of electrocatalytic applications including but not limited to CO₂ reduction reaction (CO₂RR). RuO₂/TiO₂ electrodes were previously prepared by repetitive coating and thermal decomposition (TD) of a Ru(III) precursor solution on Ti substrate. In this work, electrochemical potential cycling is applied to deposit amorphous RuO₂ (α-RuO₂) layers onto TiO₂ nanotube array (TNA) (RuO₂^CV/TNA) preformed on Ti foil. SEM, GIXRD, and voltammetry are applied to characterize the structures of the resulting RuO₂^CV/TNA. Ru loading on the RuO_{2 …}

The Agile Approach In Pharmaceutical Software Development, Priyal Bhargava

Honors Scholar Theses

The Agile development model is increasingly being adopted by the pharmaceutical industry for software development. Currently, there are several software projects under development by pharmaceutical companies that are using the Agile process. Other methodologies such as the Waterfall process, a traditional approach to project management, have evolved over time and been compared against the Agile method. Also there are conflicts of interest which should be taken into consideration when in a pharmaceutical setting such as abiding by FDA regulations. In addition, Agile’s sub-divisional approaches add to the versatility of how this iterative approach is applied in the pharmaceutical industry. The …

Patient-Derived Hydrogel As A Sacrificial Matrix For Efficient Cell Loading, Shalmli U. Joshi

Honors Scholar Theses

The field of tissue engineering focuses on delivering patient-derived stem cells to the body through the use of degradable biomaterials, such as hydrogels, which are infused into engineered scaffolds. Hydrogels act as templates to support and guide cells towards the regeneration of new tissue. In this study, we introduce a completely intraoperative procedure for obtaining a fibrin hydrogel for tissue engineering applications. In the past, fibrin hydrogel has been commonly formed by combining fibrinogen protein with animal-derived thrombin. Instead, we have developed an automated, and therefore reproducible, protocol to isolate and form fibrin hydrogel without the use of animal-derived thrombin. …

Exploiting Self-Organization In Bioengineered Systems: A Computational Approach, Delin Davis, Anna Doloman, Gregory J. Podgorski, Elizabeth Vargis, Nicholas S. Flann

Biological Engineering Faculty Publications

The productivity of bioengineered cell factories is limited by inefficiencies in nutrient delivery and waste and product removal. Current solution approaches explore changes in the physical configurations of the bioreactors. This work investigates the possibilities of exploiting self-organizing vascular networks to support producer cells within the factory. A computational model simulates de novo vascular development of endothelial-like cells and the resultant network functioning to deliver nutrients and extract product and waste from the cell culture. Microbial factories with vascular networks are evaluated for their scalability, robustness, and productivity compared to the cell factories without a vascular network. Initial studies demonstrate …

Semi-Annual Program Progress Performance Report For University Transportation Systems Pppr#7, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

The Electric Vehicle Transportation Center (EVTC) supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project objectives are to evaluate technologies, standards, planning and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC bridges the gap between deployment of electric vehicles and the traditional transportation system. This document is a summary of the activities until April 28, 2017.

Transport Planning In Delft, Netherlands, Jan Nederveen

PSU Transportation Seminars

While the Netherlands is known today for the highest bicycling rates in the world, this movement only began in the 1970s. Transportation policy has been one of the critical keys to reducing automobile trips in the Netherlands.

Visiting scholar Jan Nederveen will present on transportation planning in the compact, densely populated city of Delft. Delft has been a city since 1246, and the historic street pattern is still visible today. The city has grown to 100,000 residents and covers an area of 5 square kilometers. Twenty years ago, the council decided to change the transportation philosophy from a car-oriented system …

Darcie Christensen Wins Robins Award | College Of Engineering, Usu College Of Engineering

College of Engineering News

College of Engineering undergraduate Darcie Christensen is among the winners of this year's Robins Awards.

Study Of Custom Tool Control In Aviation And Aerospace And Selection Of Materials And Manufacturing Process, Ethan C. Rowley

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Ethan C. Rowley on April 27, 2017.

Feature Selection And Improving Classification Performance For Malware Detection, Carlos A. Cepeda Mora

Master of Science in Computer Science Theses

The ubiquitous advance of technology has been conducive to the proliferation of cyber threats, resulting in attacks that have grown exponentially. Consequently, researchers have developed models based on machine learning algorithms for detecting malware. However, these methods require significant amount of extracted features for correct malware classification, making that feature extraction, training, and testing take significant time; even more, it has been unexplored which are the most important features for accomplish the correct classification.

In this Thesis, it is created and analyzed a dataset of malware and clean files (goodware) from the static and dynamic features provided by the online …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …