Engineering Commons^™

Design And Implementation Of A Pid Controller For The Low-Speed Wind Tunnel, Carlos F. Vasquez

Theses and Dissertations

The purpose of this research is to investigate the implementation of an external PID controller on an existing variable frequency motor drive (VFD) while using MODBUS communication to read/write data from a LabVIEW station. LabVIEW is the chosen user interface and programming language. It allows human-machine interfacing for the collecting, displaying of information, and automation of the system. The main objective was to develop a new controller to facilitate the operation of the wind tunnel. The current setup makes the operator set the motor frequency manually which then correlates to a test section wind velocity. This involved a calibration period …

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Passive Solar Distillation Of Acid Rock Drainage, Stephanie Shreve, Luke Galuska, Anna Stoller, Alex Raney, Agustin Caceres, Caitlyn Chambers, Chris Graham, Devin Hazlett

Chemical Engineering Undergraduate Honors Theses

Arkansas Razorback Distillers (A.R.D.) has developed a passive solar distillation system for treating acid rock drainage (ARD) from legacy (i.e., abandoned) mines. The solar still addresses the need to reduce both the metal sulfate contaminants as well as the acidity of acid rock drainage. During the design phase, A.R.D. addressed the need for the system to be low cost, simple, and effective for general use as well as a specified location. To demonstrate the applicability of the solar still, A.R.D. used the Freeport McMoRan Inc. Copper Queen legacy mine in Bisbee, Arizona, as a base case scenario. The mine was …

Proposal To Build Nylon 6,6 Plant: A Grassroots Economic Analysis, Caleb M. Woodall

Chemical Engineering Undergraduate Honors Theses

This report analyzes the profitability of building a grass roots Nylon 6,6 plant in Calvert City, Kentucky. A rigorous process simulation was produced, equipment prices were estimated, utility usage was assessed, and a plan for the plant organization was developed. The calculations yielded values for fixed capital investment ($10.5 million), working capital ($101 million) and revenue ($114 million). The discounted cash flow rate of return was calculated to be 8.94%. The conclusion drawn from these calculated values is that the current plan for the plant would not be profitable on a 10 year project life basis. However, recommendations are presented …

Life Cycle Assessment Of Sweet Sorghum As Feedstock For Second-Generation Biofuel Production, Karla Morrissey

Chemical Engineering Undergraduate Honors Theses

There exist few life cycle assessments (LCAs) in the literature that focus on the second-generation biofuel production from sweet sorghum, a non-food-source feedstock that offers several advantages in terms of farming requirements compared to corn or sugarcane. The objective of this LCA study was to evaluate biofuels produced from sweet sorghum to determine the potential environmental benefits of producing sweet sorghum biofuel compared to conventional fossil fuels. The biofuel production process used for this study differed from other LCAs in that, in parallel to stalk juice extraction and fermentation, residual bagasse and vinasse was pyrolyzed and upgraded to a diesel …

Feasibility Analysis Of Recycled-Paper Fueled Agricultural Desalination Process: Design Of Recycling And Desalination Processes, Sean M. Street

Chemical Engineering Undergraduate Honors Theses

While recycled-paper-briquettes have lower BTU ratings than wood, and fresh water is typically a low cost to agricultural entities, situations exist where economic and/or environmental factors may allow a recycled-paper-fueled desalination process to be viable for some specific agricultural entities. This document begins with a discussion of how water is priced throughout India before analyzing trends in the Maize futures market. By tying the two together, an opportunity is created for solution which the remainder of the document presents. Paper waste in India makes-up 50% of its solid waste country-wide; however, only a quarter of that waste is recycled - …

Evaluation Of Phosphorous Removals By Biochar Supported Nano-Scale Zero-Valent Iron, Maria S. Rossetti

Chemical Engineering Undergraduate Honors Theses

This study evaluated the effectiveness of biochar-supported nano-scale zero-valent iron (nZVI/BC) in removing phosphorus (P) from water. Samples of nZVI/BC were prepared using aqueous nanoparticles synthesis techniques, and were mixed with a stock phosphorus solution. To determine P reductions water samples were tested for P content using the ascorbic acid method. This procedure was repeated for samples of stock P solution, zero-valent iron (ZVI), biochar, and ZVI/BC. nZVI/BC reduced P content by 86% whereas ZVI, biochar, and ZVI/BC removed 6%, -23%, and 17% respectively. This suggests that nZVI/BC has the potential to be an effective method of stormwater remediation.

Induced Earthquakes And Public Safety, Lyndsey L. Dickson

Civil Engineering Undergraduate Honors Theses

Like the number of earthquakes felt in Oklahoma, the number of media reports regarding large-magnitude earthquakes in Oklahoma has increased in recent years. News headlines that mention property damage and question who is responsible have sparked heated debated. In this document, a discussion is presented over the responsibility of engineers for the public’s safety in relation to earthquakes. Input from various groups is discussed, the action taken in Oklahoma is outlined, and ethical obligations presented by the American Society of Civil Engineers are considered. The United States Geological Survey (USGS) has reported a major grievance against building-code committees, but many …

Fatigue Analysis Of The Greenup Lock Gate On The Ohio River, Maggie Langston

Civil Engineering Undergraduate Honors Theses

This thesis analyzes damage due to fatigue of a typical lock gate on the United States waterway transportation system. Functioning lock gates are essential for this mode of transportation because they control water levels and provide access through dams for ships. Fatigue cracking is caused by cyclic loading and corrosion. Cyclic loading on a lock gate was imitated using a finite element model. This model was used to calculate stress ranges for a cycle so that the number of cycles to failure could be calculated. The proportion of cycles to cycles to failure is known as the fatigue capacity. A …

The Effects Of Aggregate Size On Shear Dynamic Modulus From Torsion Bar, Farida Mahmud

Civil Engineering Undergraduate Honors Theses

PavementME Design is based on mechanistic-empirical principles, which take the properties of layer materials into account in predicting pavement responses and performance. Of these principles, dynamic modulus is one of the most important. Dynamic modulus measures strain in response to the applied stress, which mimics loads from traffic and the corresponding deformation of the asphalt pavement. The traditional test for dynamic modulus in the uniaxial configuration cannot be performed on field cores due to lift thickness. Owing to that, the Indirect Tension and torsion bar configuration were developed. This research will focus on the torsion bar, which requires specimens that …

Predicted Vs Measured Initial Camber In Precast Prestressed Concrete Girders, Luke T. Freedle

Civil Engineering Undergraduate Honors Theses

Prestressing of concrete is the introduction of permanent internal stresses in a structure or system in order to improve its performance. Concrete is strong in compression but weak in tension. The tensile strength of concrete is approximately 10% of the concrete’s compressive strength. Prestressing strands helps counteract this by introducing compressive stress in the area that will experience tensile stress because of the service load. In precast prestressed concrete girders, strands are placed in the bottom flange of the girder. These strands are tensioned to approximately 75% of their ultimate tensile capacity. After placing the concrete and after the required …

Effects Of Wash Water On The Compressive Strength Of Concrete, Gabriel W. Cook

Civil Engineering Undergraduate Honors Theses

Due to the scale of concrete production throughout the world, there is potential for implementing methodologies that reduce the environmental impact of concrete processes. One intriguing solution is utilizing concrete wash water as mixing water. Concrete wash water is the water created by concrete production. If wash water can be reused, this would provide a safe disposal of the water and save millions of gallons of potable water per year (Indiana, 2014). For this to become a realistic option for concrete plants, it is important that the wash water does not decrease the compressive strength of concrete, otherwise the cost …

Effectiveness Of Small Strain Shear Wave Velocity As A Property For Assessing Damage Associated With Alkali-Silica Reaction In Concrete, Dillon K. Self

Civil Engineering Undergraduate Honors Theses

This research paper details the monitoring of expansion and shear wave velocity for fifteen concrete prisms cast in accordance with ASTM C1293 utilizing five mix designs with varying levels of ASR reactivity. Jobe sand and sodium hydroxide pellets were added in various quantities to increase the reactivity of the prisms. Strain measurements of the prisms were taken according to ASTM C129 and the shear wave velocity of the prisms was measured using ASTM C215. These measurements were taken weekly, then monthly for over a year. It was determined that shear wave velocity of the prisms decrease linearly as strain in …

Applications Of Elpasolites As A Multimode Radiation Sensor, Amber Lynn Guckes

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study consists of both computational and experimental investigations. The computational results enabled detector design selections and confirmed experimental results. The experimental results determined that the CLYC scintillation detector can be applied as a functional and field-deployable multimode radiation sensor.

The computational study utilized MCNP6 code to investigate the response of CLYC to various incident radiations and to determine the feasibility of its application as a handheld multimode sensor and as a single-scintillator collimated directional detection system. These simulations include:

• Characterization of the response of the CLYC scintillator to gamma-rays and neutrons;

• Study of the isotopic enrichment of …

Impacts Of Ozone Dose And Empty Bed Contact Time On Bulk Organic Removal And Disinfection Byproduct Mitigation In Ozone-Biofiltration Systems, Mayara Aquino

UNLV Theses, Dissertations, Professional Papers, and Capstones

In areas where water shortages have compromised water supplies, potable reuse is a promising solution. However, additional research is needed to identify and/or optimize cost-effective treatment technologies to demonstrate compliance with potable reuse regulations. Treatment trains employing reverse osmosis (RO) and advanced oxidation, a combination known as ‘full advanced treatment’ (FAT), are required by the California Division of Drinking Water (CDDW) for surface water augmentation and direct injection of recycled water into local aquifers. A maximum concentration of 0.5 mg/L of wastewater-derived total organic carbon (TOC) is also required by CDDW in all groundwater recharge applications. This appears to be …

Indian Sign Language Numbers Recognition Using Intel Realsense Camera, Sravani Mudduluru

Master's Theses

The use of gesture based interaction with devices has been a significant area of research in the field of computer science since many years. The main idea of these kind of interactions is to ease the user experience by providing high degree of freedom and provide more interactive way of communication with the technology in a natural way. The significant areas of applications of gesture recognition are in video gaming, human computer interaction, virtual reality, smart home appliances, medical systems, robotics and several others. With the availability of the devices such as Kinect, Leap Motion and Intel RealSense cameras accessing …

Refurbished And 3d Modeled Thermal Vacuum Chamber, Lauren M. Glenn

Master's Theses

Spacecraft testing includes acoustics, vibrations, and thermal vacuum. Cal Poly’s Space Environments Lab is equipped with multiple vacuum chambers, but no thermal vacuum chamber. The purpose of this thesis is to incorporate an ATS Chiller system with the HVEC vacuum chamber so students are able to experiment with a thermal vacuum chamber. The ATS Chiller had leaky pipes that needed to be refurbished and a shroud was implemented to improve thermal capabilities of the system. The full system was able to reach temperatures as low as -38ºC and as high as 58ºC at a pressure of 10-6 Torr. The ATS …

Actuator Disk Theory For Compressible Flow, Htet Htet Nwe Oo

Master's Theses

Because compressibility effects arise in real applications of propellers and turbines, the Actuator Disk Theory or Froude’s Momentum Theory was established for compressible, subsonic flow using the three laws of conservation and isentropic thermodynamics. The compressible Actuator Disk Theory was established for the unducted (bare) and ducted cases in which the disk was treated as the only assembly within the flow stream in the bare case and enclosed by a duct having a constant cross-sectional area equal to the disk area in the ducted case. The primary motivation of the current thesis was to predict the ideal performance of a …

Energy Harvesting From Exercise Machines: Comparative Study Of Ehfem Performance With Dc-Dc Converters And Dissipative Overvoltage Protection Circuit, Cameron Kiddoo

Master's Theses

Energy Harvesting from Exercise Machines (EHFEM) is an ongoing project pursuing alternate forms of sustainable energy for Cal Poly State University. The EHFEM project seeks to acquire user-generated DC power from exercise machines and sell that energy back to the local grid as AC power. The end goal of the EHFEM project aims to integrate a final design with existing elliptical fitness trainers for student and faculty use in Cal Poly’s Recreational Center. This report examines whether including the DC-DC converter in the EHFEM setup produces AC power to the electric grid more efficiently and consistently than an EHFEM system …

Supercritical Carbon Dioxide Extraction, Kevin Carney

Master's Theses

The objective of this thesis is to explore the properties of supercritical carbon dioxide (CO₂). In addition, the feasibility of building a small-scale low cost system will be explained. A supercritical fluid is a fluid which exhibits properties between liquid and gas with liquid like densities and viscosities similar to a gas. Since the discovery of supercritical fluids in 1822, the use of supercritical fluids, specifically supercritical CO₂, has grown in popularity. The application of supercritical CO₂ has continued to grow in industrial applications since the 1970’s. Supercritical CO₂’s has many beneficial properties …

Rules Based Analysis Engine For Application Layer Ids, David Scrobonia

Master's Theses

Web application attack volume, complexity, and costs have risen as people, companies, and entire industries move online. Solutions implemented to defend web applications against malicious activity have traditionally been implemented at the network or host layer. While this is helpful for detecting some attacks, it does not provide the gran- ularity to see malicious behavior occurring at the application layer. The AppSensor project, an application level intrusion detection system (IDS), is an example of a tool that operates in this layer. AppSensor monitors users within the application by observing activity in suspicious areas not able to be seen by traditional …

Smart Feedback Control For Fiber-Optics Acoustic Emission Sensor System, Xiangyu Luo

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Optical fiber sensors for ultrasonic detection have become a subject of much research in recent years. In this thesis, a fiber-optic acoustic emission (AE) sensor system that is capable of performing AE detection, even when the sensor is experiencing large quasi-static strains, is first described. The system consists of a smart selection of a wavelength notch to which a distributed feedback (DFB) laser is locked for high sensitivity AE signal demodulation. A smart feedback control unit for the DFB laser, which is the focus of this thesis, is designed and investigated. The smart control ensures that the AE signal is …

Electromagnetic Design Of A Superconducting Twin Axis Cavity, S. U. De Silva, H. Park, J. R. Delayen, F. Marhauser, A. Hutton

Physics Faculty Publications

The twin-axis cavity is a new kind of rf superconducting cavity that consists of two parallel beam pipes, which can accelerate or decelerate two spatially separated beams in the same cavity. This configuration is particularly effective for high-current beams with low-energy electrons that will be used for bunched beam cooling of high-energy protons or ions. The new cavity geometry was designed to create a uniform accelerating or decelerating fields for both beams by utilizing a TM₁₁₀ dipole mode. This paper presents the design rf optimization of a 1497 MHz twin-axis single-cell cavity, which is currently under fabrication.

Biplane Fluoroscopy For Hindfoot Motion Analysis During Gait: A Model-Based Evaluation, Janelle A. Cross, Ben Mchenry, Robert C. Molthen, Emily Exten, Taly Gilat-Schmidt, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

The purpose of this study was to quantify the accuracy and precision of a biplane fluoroscopy system for model-based tracking of in vivo hindfoot motion during over-ground gait. Gait was simulated by manually manipulating a cadaver foot specimen through a biplane fluoroscopy system attached to a walkway. Three 1.6-mm diameter steel beads were implanted into the specimen to provide marker-based tracking measurements for comparison to model-based tracking. A CT scan was acquired to define a gold standard of implanted bead positions and to create 3D models for model-based tracking. Static and dynamic trials manipulating the specimen through the capture volume …

Design Baseline Document: Mini Baja Frame, Michael Luke Scoggins

Undergraduate Honors Capstone Projects

Our objective as the Mini Baja Frame team is to design and implement a prototype vehicle frame that is both cost-effective and competitive in an all-terrain racing environment. This vehicle must be able to endure the trials of the Society of Automotive Engineers (SAE) Mini Baja competition. An effective frame will contribute to the complete Utah State University Mini Baja Team objectives by efficiently integrating the components produced by the drivetrain and the suspension engineers. In addition, this competition is a means for us as students to gain valuable, tangible experience in the engineering design process.

Pairing Of Anaerobic And Aerobic Treatment Of Petroleum Wastewater, Zachary Fica

Undergraduate Honors Capstone Projects

The objective of this project was to treat petroleum refinery wastewater using a combination of anaerobic and aerobic processes, namely an Up-flow Anaerobic Sludge Blanket (UASB) reactor paired with a Rotation Algae Biofilm Reactor (RABR), respectively, to produce a treated effluent. The treatment method developed needed to produce a cost-effective and efficient way to decrease nitrogen, phosphorous, total suspended solids (TSS), and COD concentrations to below State of Utah limitations. It was demonstrated that RABR treatment was capable of reducing effluent concentrations of nitrogen, phosphorus, and TSS to State of Utah limitations. RABR treatment did not significantly reduce COD from …

Design Of Logan City's Storm Water Conveyance System, Megan Gordon

Undergraduate Honors Capstone Projects

This report summarizes 10th West Engineers’ (10WE) storm water conveyance design for Logan City. The implementation of the design mitigates flood risk due to storm water discharge, helps improve local water quality, and uses infrastructure that would otherwise be abandoned. The system collects storm water discharged along 1000 West and transports the water to the holding pond located at approximately 2400 West 2200 North, Logan, Utah (see Figure 1).

Logan City is located in northern Utah’s Cache County. As development and redevelopment occur, storm water runoff quantities will decrease due to new regulations. However, Logan City’s storm water system does …

Application Of Strand-Cartesian Interfaced Solver On Flows Around Various Geometries, Yushi Yanagita

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This work examines the application of a high-order numerical method to strand-based grids to solve the Navier-Stokes equations. Coined "Flux Correction", this method eliminates error terms in the fluxes of traditional second-order finite volume Galerkin methods. Flux Correction is first examined for applications to the Reynolds-Averaged Navier-Stokes equations to compute turbulent flows on a strictly strand-based domain. Flow over three geometries are examined to demonstrate the method’s capabilities: a three-dimensional bump, an infinite wing, and a hemisphere-cylinder configuration. Comparison to results obtained from established codes show that the turbulent Flux Correction scheme accurately predicts flow properties such as pressure, velocity …

Production Of Phenol-Formaldehyde Adhesives From Catalytic Pyrolysis Oil, Angela M. Akude

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Phenol-formaldehyde adhesives conventionally synthesized from fossil fuel resources pose two major concerns: sustainability issues and environmental concerns. The sustainability issues arise from the inevitable depletion of fossil fuel resources while
the environmental concerns, primarily, stem from the emission of volatile organic compounds. Thus, opting for alternative raw materials from renewable resources reduces the dependence on fossil fuels as well as promote the production of environmentally-friendly products.

The successful commercialization of bio-adhesives requires that the substitution of phenol with bio-oil during resin synthesis should be above 40%. In this study, catalytic pyrolysis oil produced from pinyon-juniper biomass and red mud alumina …

Multifunctional Reconfigurable Antennas And Arrays Operating At 60 Ghz Band, Abdurazag Mohamed Khalat

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In this digital era, the demand for faster, reliable, and adaptive wireless communication systems is increasing. Various factors can affect the signal propagation in the wireless medium, such as weather, broadcast environment, physical obstructions, etc. This study aims to improve the antenna performance by means of dynamically altering its properties so that it can adapt to different environments and communication scenarios. This study is not resorting in a traditional antenna design, but rather explores an alternative approach known as the multifunctional reconfigurable antennas (MRAs). Unlike its predecessor, i.e., legacy antennas, MRAs can dynamically change its operation frequency, radiation pattern, and …