Engineering Commons^™

Determination Of Fatty Acid Methyl Esters Derived From Algae Scenedesmus Dimorphus Biomass By Gc-Ms With One-Step Esterification Of Free Fatty Acids And Transesterification Of Glycerolipids, Satya Girish Chandra Avula, Joanne M. Belovich, Yan Xu

Chemical & Biomedical Engineering Faculty Publications

Algae can synthesize, accumulate and store large amounts of lipids in its cells, which holds immense potential as a renewable source of biodiesel. In this work, we have developed and validated a GC–MS method for quantitation of fatty acids and glycerolipids in forms of fatty acid methyl esters derived from algae biomass. Algae Scenedesmus dimorphus drymass was pulverized by mortar and pestle, then extracted by the modified Folch method and fractionated into free fatty acids and glycerolipids on aminopropyl solid-phase extraction cartridges. Fatty acid methyl esters were produced by an optimized one-step esterification of fatty acids and transesterification of glycerolipids …

Developing Sustainable Rice Production Through Image Classification, Parker R. Fitzgerald

Industrial Engineering Undergraduate Honors Theses

The agricultural industry’s continued success is critical to our future. However, many agricultural practices—specifically rice farming—are currently based on unsustainable methods. The processes used in rice farming consume water at an unsupportable rate, and, consequently, are serious contributors to rising emission levels. Several alternative growing methods have been introduced, and one of the most promising candidates is Alternative Wetting and Drying (AWD). An obstacle encountered by proponents of these methods comes in implementation. Studies have shown AWD is more successful in fields with higher leveling precision. The research in this study works to create a stepping stone for farmers to …

A Quantitative Model For Truck Parking Utilization With Hours Of Service Regulations, Alexis Christine Gaddy

Industrial Engineering Undergraduate Honors Theses

Continual growth in traffic volume on U.S. Highways and insufficient parking for commercial trucking vehicles has led to significant safety concerns for truck drivers. Hours of Service (HOS) regulations dictate driving and rest periods of truck drivers. When a truck driver must stop as designated by the HOS regulations and the nearest parking location is at capacity, the trucker must either continue driving past the HOS limit or park in an undesignated and possibly illegal or unsafe spot such as an off-ramp. The combination of these two variables play an important role in the safety of truck drivers on a …

Development Of A New Joint System For A Circular-Shaped Infrastructure, Sugyu Lee

Civil Engineering Dissertations - Archive

This dissertation focused on development of new carbon fiber joint systems for all types of underground gravity and sewer pipe systems. Specifically, the external CFRP wrap and, particularly, the carbon fiber reinforced polymer (CFRP) internal coupler can be used for concrete pipes with regular or reduced wall thicknesses. The concrete pipes with reduced wall thickness are classified as semi-rigid pipe and are referred to as thin-wall (TW) concrete pipe. The performance of the CFRP coupler is presented in this report based on full-scale experimental tests and three dimensional non-linear finite element studies for regular and thin wall pipes. Finally, design …

Long-Term Shear Investigation Of Polypropylene Fiber-Reinforced Concrete Beams, Michael Daniels

Civil Engineering Dissertations - Archive

This study investigates the long-term influence of polypropylene fibers on the shear strength and failure behavior of longitudinally reinforced concrete beams, with or without stirrups, subjected to accelerated aging conditions. For this study, 32 large scale short beams with different volume fractions of polypropylene fibers were casted and tested in the Civil Engineering Laboratory Building (CELB) at the University of Texas at Arlington: (1) Control reinforced concrete beams (RC); (2) Reinforced concrete beams with minimum stirrups (RCS) according to ACI 318; (3) Synthetic fiber-reinforced concrete beams with Vf=0.5% (SNFRC 0.5%), which correspond to 7.67 lbs./yd3 (4.55 kg/m3)’; and (4) Synthetic …

Target-Specific Capture Of Relevant Gaseous Compounds Using Natural And Synthetic Nano And Micro Materials, Fernanda Delbuque Guerra

All Dissertations

By definition, volatile organic compounds (VOCs) are organic compounds that easily become vapor or gases. Many VOCs are hazardous air pollutants and often known for their low, often unpleasant, threshold odor, which can be below parts per billion in some cases. Nanotechnology-based materials for the remediation of gaseous pollutants has been the focus of many researchers due to their unique chemical and physical properties and enhanced reactivity when compared to bulkier materials. Among the many challenges preventing the global use of nanomaterials are the high costs of fabrication, on-site recovery, limited scale-up, potential toxicity since many of them rely on …

Detection Of Leukocytes Stained With Acridine Orange Using Unique Spectral Features Acquired From An Image-Based Spectrometer, Courtney J. Hunter

Biomedical Engineering Undergraduate Honors Theses

A leukocyte differential count can be used to diagnosis a myriad blood disorders, such as infections, allergies, and efficacy of disease treatments. In recent years, attention has been focused on developing point-of-care (POC) systems to provide this test in global health settings. Acridine orange (AO) is an amphipathic, vital dye that intercalates leukocyte nucleic acids and acidic vesicles. It has been utilized by POC systems to identify the three main leukocyte subtypes: granulocytes, monocytes, and lymphocytes. Subtypes of leukocytes can be characterized using a fluorescence microscope, where the AO has a 450 nm excitation wavelength and has two peak emission …

Characterization Of The Response Of Trpv4 To Chemical Stimulation, Jacob V. Schluns

Biomedical Engineering Undergraduate Honors Theses

Traumatic Brain Injury (TBI) is a source of acute and chronic health issues for many patients. One of the components of the brain’s response to injury is astrogliosis, in which astrocytes that normally function to repair the brain instead form scar tissue that halts repair processes. Transient Receptor Potential Vanilloid Type 4 (TRPV4) is a trans-membrane calcium channel involved in astrogliosis. Through Fura-2AM based calcium imaging, the base activity of this channel in mouse astrocyte cells was recorded. The cells were then subjected to TRPV4 agonist and antagonist stimulation and their subsequent activity levels were recorded. The data showed that …

Models For Pedestrian Trajectory Prediction And Navigation In Dynamic Environments, Jeremy N. Kerfs

Master's Theses

Robots are no longer constrained to cages in factories and are increasingly taking on roles alongside humans. Before robots can accomplish their tasks in these dynamic environments, they must be able to navigate while avoiding collisions with pedestrians or other robots. Humans are able to move through crowds by anticipating the movements of other pedestrians and how their actions will influence others; developing a method for predicting pedestrian trajectories is a critical component of a robust robot navigation system. A current state-of-the-art approach for predicting pedestrian trajectories is Social-LSTM, which is a recurrent neural network that incorporates information about neighboring …

Protective Relaying Student Laboratory, Kenan W. Pretzer

Master's Theses

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that uses microprocessor-based relays to reinforce the fundamental concepts of power system protection. This paper summarizes a laboratory system fit for this task and presents a set of proposed laboratory experiments to establish a new laboratory course at Cal Poly. The experiments expose students to the capabilities of industry-standard microprocessor-based relays through hands-on procedures that demonstrate common power system …

On The Effect Of Design Tolerances On The Performance Of Synchronous Pm Machines Evaluated According To The Ieee Std 1812, Narges Taran, Vandana Rallabandi, Dan M. Ionel, Ping Zhou

Power and Energy Institute of Kentucky Faculty Publications

In the process of designing an electric machine, the systematic study of tolerances for the design variables and material properties is of the utmost importance. This paper proposes a method by which possible variations of the design variables and material properties can be distinguished. The design of experiments (DOE) technique, open-circuit and short-circuit tests, with minimum instrumentation requirements, have been employed. Virtual tests are conducted based on the recently approved IEEE 1812 testing guide for PM synchronous machines. As a case study, a 100 hp 16-pole 18-slot spoke-type PM machine is discussed. It is shown that variation in magnet remanence, …

Axial-Flux Pm Synchronous Machines With Air-Gap Profiling And Very High Ratio Of Spoke Rotor Poles To Stator Concentrated Coils, Vandana Rallabandi, Narges Taran, Dan M. Ionel, Ion G. Boldea

Power and Energy Institute of Kentucky Faculty Publications

Permanent magnet machines including a magnetic gearing effect are attractive for low-speed high-torque applications. This paper proposes a dual-stator axial-flux machine topology with a high ratio for the number of rotor poles to concentrated stator coils. The stator consists of a relatively small number of teeth, with each tooth including multiple smaller/auxiliary teeth. The rotor employs spoke-type permanent magnets, which result in high flux concentration, thereby further improving the torque density. The paper discusses the principle of operation of the proposed machine topology. Finite element results on example designs with 6 stator teeth, each having 2 and 3 auxiliary teeth, …

An Industrial Process For The Production Of Nylon 6 6 Through The Step-Growth Reaction Of Adipic Acid And Hexamethylenediamine, David Wallace Jacobson

Chemical Engineering Undergraduate Honors Theses

A continuous, two stage, four reactor system process is presented here for the proposed purpose of nylon 6 6 manufacture at the rate of 85 million lbs per year. Report components include: process descriptions, simulation methods and results, economic analysis, EH&S considerations, process control descriptions, and a general recommendation for how to proceed with plans enclosed. The general design of the plant is a two stage system composed of one PFR used for the formation of nylon salt and low molecular weight nylon chains, followed by three CSTR’s used for increasing nylon molecular weight. The overall process has been found …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

Bias And Other Error In Gridded Weather Data Sets And Their Impacts On Estimating Reference Evapotranspiration, Philip A. Blankenau

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Gridded weather data sets are increasingly used in a variety of hydrologic and agricultural applications due to their complete spatial and temporal coverage. One application of gridded data sets is the estimation of evapotranspiration (ET). Several operational remote sensing (RS) approaches for estimating ET, such as the SEBAL, METRIC and EEFlux models, require estimates of reference ET (ETref), where ETref is expected ET from a hypothetical reference crop of clipped grass or alfalfa. Gridded weather data provide for the computation of ETref in all areas of a remote sensing image, and therefore potentially remove the need for dense weather station …

The Biomechanics Of Music Performance, Rachel F. Bellisle, Jessika Decker

Senior Honors Projects

When first learning to play a wind instrument, beginner musicians are taught how to hold their instrument and correctly position their body. They are taught how to sit, where to put their hands and fingers on the keys, and how to hold their arms. This initial lesson on posture and hand positioning is often short, as one quickly moves on to learn the embouchure and breathing techniques that allow sound to be produced. As a musician progresses in skill, positioning is emphasized more, and they learn that it can affect their risk of strain or injury and improve their sound …

Genetically Engineered Organisms: Progress Or Poison, Melina Sansi

Senior Theses

Genetically engineered organisms are a part of almost everything we put into our bodies. More than any other time in history, humans are manipulating plants and organisms on an advanced level. Scientists are able to genetically alter food so that it precisely fills a specific dietary need, or increase crop yields to feed the growing global population expected to reach 9 billion people by the year 2050. Currently 250 million acres worldwide are used to grow genetically modified organisms. Many consumers don’t fully understand the use and impact of genetically engineered organisms for lack of accessible and straightforward information. Federal …

Fast Monostatic Scattering Analysis Based On Bayesian Compressive Sensing, Huan Huan Zhang, Wei E.I. Sha, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In conjugation with the method of moments, the Bayesian compressive sensing algorithm is utilized to fast analyze the monostatic electromagnetic scattering problem. Different from the orthogonal matching pursuit based compressive sensing approach that cannot determine the required measurement times, the proposed method overcomes the difficulty by adopting the Bayesian framework to recover the underlying signal. Error bars of the signal can be obtained in the recovery procedure, which offers a way to adaptively determine the number of compressive-sensing measurements.

Load Characteristics Of Wireless Power Transfer System With Different Resonant Types And Resonator Numbers, Yiming Zhang, Zhengming Zhao, Kainan Chen, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

Wireless Power Transfer (WPT) has been the research focus and applied in many fields. Normally power is transferred wirelessly to charge the battery, which requires specific load characteristics. The load characteristics are essential for the design and operation of the WPT system. This paper investigates the load characteristics of the WPT system with different resonant types and resonator numbers. It is found that in a WPT system with series or LCL resonance under a constant voltage source, the load characteristic is determined by the number of inductors. Even number of inductors results in a constant current characteristic and odd number …

Creating A Zero + Energy Building Model, Ashley N. Thompson

Honors Theses

The goal of this project was to create an accurate representation of a zero + energy home both for physical experimentation and for numerical modeling. This means that the home does not rely on power from the grid, but only on alternative energy sources such as solar. The project consists of two major subcategories. The electrical portion of the project consists of implementing the energy source and control system, and the mechanical portion of the project consists of thermal analysis, thermal flow simulations, and physical construction. A 50 W solar panel was chosen as an energy source, which directs power …

Assessment Of Kinematics And Electromyography Following Arthroscopic Single-Tendon Rotator Cuff Repair, Jessica M. Fritz, Ryan R. Inawat, Brooke A. Slavens, John R. Mcguire, Dean W. Ziegler, Sergey S. Tarima, Steven I. Grindel, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

Background

The increasing demand for rotator cuff (RC) repair patients to return to work as soon as they are physically able has led to exploration of when this is feasible. Current guidelines from our orthopedic surgery clinic recommend a return to work at 9 weeks postoperation. To more fully define capacity to return to work, the current study was conducted using a unique series of quantitative tools. To date, no study has combined 3-dimensional (3D) motion analysis with electromyography (EMG) assessment during activities of daily living (ADLs), including desk tasks, and commonly prescribed rehabilitation exercise.

Objective

To apply a quantitative, …

Cost And Fuel Usage Optimization Of Activating Solution Based Silica Fume Geopolymer Concrete, Lateef Najeh Assi

Theses and Dissertations

Development of sustainable construction materials has been the focus of research efforts worldwide in recent years. Concrete is a major construction material; hence, finding alternatives to ordinary Portland cement is of extreme importance due to high levels of carbon dioxide emissions associated with its manufacturing process. Geopolymer concrete is a potential solution; however, concerns about the high cost and the low real fuel energy efficiency are obstacles against its increase in the market share.

In this thesis, the current cost and fuel (thermal energy) usage are calculated. In addition, the cost and fuel usage were optimized based on previous experimental …

Low Bandwidth Communication For Networked Power Hardware-In-The-Loop Simulation, Sean Borgsteede

Theses and Dissertations

Power-Hardware-In-the-Loop (PHIL) simulations allow the design and validation of power hardware components in virtual power system schemas with near real-time operation. This technique is increasingly used in the development cycle of many products to reduce design costs and increase design fidelity. The Hardware under Test (HuT) interfaces with a simulation of the user’s choosing through a hardware interface (HI). The digitally simulated system (DSS) runs on the real-time simulator before sending a reference value to the hardware interface to enforce. In this virtual to real interface, closed-loop stability and the simulation accuracy are the two paramount criteria in regards to …

Physical Characterization Of Electrodeposited Pcb Copper Foil Surfaces, Blessing Kolawole Ojo

Theses and Dissertations

Given that data rates of computers is on the rise and optimization of bus speeds continue to be of importance in improving the system performance, different models for a prediction of the impact of the surface roughness of copper foil have been developed and incorporated into different software’s and applications used by design engineers.

With different models known to have been created for characterization of electrodeposited copper, they have been mostly affected by the need for higher frequencies as they are mostly useful for prediction at frequency of a few GHz. With the introduction of a new model (known as …

Evaluating A Personal Stress Monitoring System, Sneha Gogineni

Theses and Dissertations

Now-a-days, Life is generally much more stressful than in the past. "Stress" is the word that we use when we feel that we are overloaded mentally in our thoughts and wonder whether we can really cope with those placed upon us. Sometimes, stress gets us going and they are good for us but at other times, it could be the cause to undermine both our mental and physical health. The way we respond to a challenge can be considered as a kind of stress. Part of our response to a challenge is physiological and affects our own physical state. When …

Effect Of Single Dead End Entry Inclination On Dpm Plume Dispersion, Yi Zheng, Hai Lan, Magesh Thiruvengadam, Jerry C. Tien, Ying Li

Mining Engineering Faculty Research & Creative Works

Diesel particulate matter (DPM) is a by-product from operating diesel engines. Since diesel powers are one of the major sources of energy for mobile underground mining equipment, the adverse health effects of DPM are of a great concern. This paper used computational fluid dynamics (CFD) method to study the effect of entry inclination on DPM plume distribution in a dead-end entry. An upward mining face and a downward mining face were built with a truck and a loader in loading operation close to the face area. A species transport model with incorporated buoyancy effect was used to examine the DPM …

Trim Tuning Of Sps-Series Dqw Crab Cavity Prototypes, S. Verdú-Andrés, J. Skaritka, Q. Wu, A. Ratti, S. Baurac, C. H. Boulware, T. Grimm, J. Yancey, W. Clemens, E. A. Mcewen, H. Park

Physics Faculty Publications

The final steps in the manufacturing of a superconducting RF cavity involve careful tuning before the final welds to match the target frequency as fabrication tolerances may introduce some frequency deviations. The target frequency is chosen based on analysis of the shifts induced by remaining processing steps including acid etching and cool down. The baseline fabrication of a DQW crab cavity for the High Luminosity LHC (HL-LHC) envisages a first tuning before the cavity subassemblies are welded together. To produce a very accurate final result, subassemblies are trimmed to frequency in the last machining steps, using a clamped cavity assembly …

Wakefield Analysis Of Superconducting Rf-Dipole Cavities, Subashini De Silva, Jean Delayen

Physics Faculty Publications

RF-dipole crabbing cavities are being considered for a variety of crabbing applications. Some of the applications are the crabbing cavity systems for LHC High Luminosity Upgrade and the proposed Electron-Ion Collider for Jefferson Lab. The design requirements in the current applications require the cavities to incorporate complex damping schemes to suppress the higher order modes that may be excited by the high intensity proton or electron beams traversing through the cavities. The number of cavities required to achieve the desired high transverse voltage, and the complexity in the cavity geometries also contributes to the wakefields generated by beams. This paper …

Editorial For The Special Issue On Micro/Nano-Chip Electrokinetics, Xiangchun Xuan, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

Micro/nanofluidics-based lab-on-a-chip devices have found extensive applications in the analysis of chemical and biological samples over the past two decades. Electrokinetics is the method of choice in these micro/nano-chips for transporting, manipulating and sensing various analyte species (e.g., ions, molecules, fluids and particles, etc.) [1,2]. This Special Issue in Micromachines is aimed to provide the recent development in the field of Micro/Nano-Chip Electrokinetics. It consists of 15 papers, which cover both fundamentals and applications, original research and reviews

Wireless Charging For Bluetooth Earphones, Daniel Carlson

Electrical Engineering

This project involves designing and building an inductive charging system for Bluetooth earphones. This system provides a charging dock for a pair of retrofitted Bluetooth earphones and focuses on ease-of-use and convenience for the user. The motivations for this project include providing charging compatibility to changing audio technology and trends. Smart phones and other audio products are increasingly leaning towards wireless (Bluetooth) audio, and wireless headphones/headsets are naturally becoming more prevalent to match this trend. A small, easy to use, and efficient charging dock for these earphones seems like a necessary accessory for this technology to seem attractive to consumers. …