Engineering Commons^™

Characterization Of Polyester Polymer Concrete Material Properties, Robert Stevens, Dr. W. Spencer Guthrie

Journal of Undergraduate Research

The purpose of this project was to investigate selected material properties of polyester polymer concrete (PPC) using laboratory testing. PPC is a synthetic concrete that combines sand and coarse aggregate with a polyester resin binder that takes the place of conventional portland cement. PPC is commonly used as an overlay material on bridge decks. There is some ambiguity about several important mechanical properties of PPC, including coefficient of thermal expansion (CTE), degree of hardening, and modulus of elasticity. The objective of this research was to investigate the effect of temperature on these properties. The results of this research will help …

Time-Difference Amplifier For Time-To-Digital Converters, Matthew Padilla, Dr. Shiuh-Hua Wood Chiang

Journal of Undergraduate Research

Currently most digital converters convert from an analog voltage signal to a digital signal. In recent years some progress has been made in converting from an analog time signal to a digital signal. The purpose of this project is to improve upon current designs of time-to-digital converters by making a time-difference amplifier that is more power efficient and less sensitive to variation.

Currently time-to-digital converters are commonly implemented similarly to analog voltage-to-digital converters, using a two-step architecture [1]. In a voltage-to-digital converter, the first stage is a coarse quantizer, and the difference between the voltage signal and the quantization is …

The Effect Of Soaking Time On The Accuracy Of A Vertical Impedance Spectroscopy Probe, Jared Baxter, Brian Mazzeo

Journal of Undergraduate Research

According to the U.S. Department of Transportation, nearly 10% of the nation’s 611,845 brides are structurally deficient. (https://www.fhwa.dot.gov/bridge/nbi/no10/defbr15.cfm) This means that nearly 60,000 active bridges are unsafe. This is a major problem, and one that is not easily solved. Many of these bridges are of significant importance to the nation’s highways and cannot be retired without inconveniencing millions of people. Furthermore, to repair or rebuild all of these bridges would take billions of dollars, a cost that far exceeds Federal Highway Administrations (FHWA) funding.

Crispr-Cas9 Directed Pdgf-Β Transcriptional Activation In Fibroblast Cell, Lia Gale, Brian Jensen

Journal of Undergraduate Research

Chronic wounds, particularly in the lower limb, represent a huge physical, financial, and social burden to 50 million people worldwide. In 2014, Americans paid an estimated $25 billion for simple wound care for patients. Despite these efforts, traditional methods of trying to heal wounds from the outside via surgical debridement, anti-inflammatory medications, moisture correction, etc. often fail to close wounds (Demidova-Rice et al., 2012). If wound closure does not occur, infection will cause localized tissue death and can lead to sepsis and death. Unfortunately, this leaves amputation as the only resort when wounds don’t close. If primary amputation occurs, …

Network Congestion Effect Of E-Hailing Transportation Services, Xuegang Ban

PSU Transportation Seminars

E-hailing plays a key role in emerging transportation services such as ridesourcing, ridesharing and taxis, among others. This seminar will present a general economic model to analyze the congestion effect of e-hailing services in a transportation network.

The model can help analyze customers’ choices of different modes, based on their value of time and the charging schemes of different services, as well as the overall impact of the services to network level congestion.

Congratulations 2017 Graduates | College Of Engineering, Usu College Of Engineering

College of Engineering News

The College of Engineering at Utah State University congratulates all students who graduated May 5-6.

Adaptive Region-Based Approaches For Cellular Segmentation Of Bright-Field Microscopy Images, Hady Ahmady Phoulady

USF Tampa Graduate Theses and Dissertations

Microscopy image processing is an emerging and quickly growing field in medical imaging research area. Recent advancements in technology including higher computation power, larger and cheaper storage modules, and more efficient and faster data acquisition devices such as whole-slide imaging scanners contributed to the recent microscopy image processing research advancement. Most of the methods in this research area either focus on automatically process images and make it easier for pathologists to direct their focus on the important regions in the image, or they aim to automate the whole job of experts including processing and classifying images or tissues that leads …

Supraspinatus Tendon Micromorphology In Individuals With Subacromial Pain Syndrome, Federico Pozzi, Amee L. Seitz, Hillary A. Plummer, Kira Chow, Gregory R. Bashford, Lori A. Michener

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Study Design: Cross-sectional cohort. Introduction: Tendon collagen organization can be estimated by peak spatial frequency radius (PSFR) on ultrasound images. Characterizing PSFR can define the contribution of collagen disruption to shoulder symptoms.

Purpose of the Study: The purpose of this was to characterize the (1) supraspinatus tendon PSFR in participants with sub acromial pain syndrome (SPS) and healthy controls; (2) PSFR between participants grouped on a tendon visual quality score; and (3) relationship between PSFR with patient-reported pain, function, and shoulder strength.

Methods: Participants with SPS (n ¼ 20) and age, sex, and arm-dominance matched healthy controls (n ¼ 20) …

Spatio-Temporally Resolved Optical Laser-Induced Damage To Study Defect Limited Performance Of Optical Films, Yejia Xu

Optical Science and Engineering ETDs

Laser-induced damage (LID) limits the performance of optical films and surfaces. Despite intensive study for decades following the invention of laser, the study of LID remains timely and attractive, because for nanosecond laser pulses the LID process is controlled by randomly distributed defects of unknown origin.

Traditional damage tests yield little information about the defects present in optical films and surfaces. These methods record a "yes" or "no" damage result after each test and cannot distinguish the different defects present.

This dissertation focuses on the development of a new kind of laser-induced damage test that measures the actual fluence (intensity) …

Electric Vehicle Energy Impacts, Florida Solar Energy Center, Katherine Mckenzie

FSEC Energy Research Center®

The objective of this research project was to evaluate the impacts of electric vehicles (EVs) and renewable wind and solar photovoltaic (PV) power generation on reducing petroleum imports and greenhouse gas emissions to Hawaii. In 2015, the state of Hawaii mandated fossil fuel electric power displacement by imposing Renewable Portfolio Standards (RPS) that will reach 100% renewable electricity generation by 2045. With small, remote and isolated island electricity grids, utilities in Hawaii face unprecedented technical and economic challenges to meet these goals with exceedingly high levels of intermittent wind and PV power generation. To meet these RPS goals, EVs become …

Microstructure Correlation With Formability For Biaxial Stretching Of Magnesium Alloy Az31b At Mildly Elevated Temperatures, David T. Fullwood, Isaac Chelladurai, Michael P. Miles, John E. Carsley, Raj K. Mishra, Irene J. Beyerlein, Marko Knezevic

Faculty Publications

Magnesium AZ31B sheets of 2 mm thickness were stretch formed using a 101.6 mm diameter punch at temperatures from 25°C - 150°C, in 25°C increments. Surface strains were measured using a digital image correlation (DIC) method. The punch height vs load curve was found to be the same for temperatures of 25°C and for 50°C, while at 75°C and above the load for a given punch height started to decrease, indicating a potential change in deformation mechanism. Electron Backscatter Diffraction (EBSD) was used to quantify features of the microstructure in the tested specimens. In particular, the gradual decrease in twinning …

Two-Step Sequential Pretreatment For The Enhanced Enzymatic Hydrolysis Of Coffee Spent Waste, Rajeev Ravindran, Swarna Jaiswal, Nissreen Abu-Ghannam, Amit Jaiswal

Articles

In the present study, eight different pretreatments of varying nature (physical, chemical and physico-chemical) followed by a sequential, combinatorial pretreatment strategy was applied to spent coffee waste to attain maximum sugar yield. Pretreated samples were analysed for total reducing sugar, individual sugars and generation of inhibitory compounds such as furfural and hydroxymethyl furfural (HMF) which can hinder microbial growth and enzyme activity. Native spent coffee waste was high in hemicellulose content. Galactose was found to be the predominant sugar in spent coffee waste. Results showed that sequential pretreatment yielded 350.12mg of reducing sugar/g of substrate, which was 1.7-fold higher than …

Inferring Motion Direction Using Commodity Wi-Fi For Interactive Exergames, Kun Qian, Chenshu Wu, Zimu Zhou, Yue Zheng, Yang Zheng, Yunhao Liu

Research Collection School Of Computing and Information Systems

In-air interaction acts as a key enabler for ambient intelligence and augmented reality. As an increasing popular example, exergames, and the alike gesture recognition applications, have attracted extensive research in designing accurate, pervasive and low-cost user interfaces. Recent advances in wireless sensing show promise for a ubiquitous gesture-based interaction interface with Wi-Fi. In this work, we extract complete information of motion-induced Doppler shifts with only commodity Wi-Fi. The key insight is to harness antenna diversity to carefully eliminate random phase shifts while retaining relevant Doppler shifts. We further correlate Doppler shifts with motion directions, and propose a light-weight pipeline to …

Find, Build, And Export Information For 3d Printing Of Your Favorite Molecules And Crystal Structures At Two Dedicated Websites, Paul R. Destefano, Peter Moeck

Student Research Symposium

As 3D printers require instructions, the Nano-Crystallography Group at Portland State University is creating two websites (http://nanocrystallography.org/3dconvert/ and http://nanocrystallography.research.pdx.edu/3d-print-files/convert/) where such instructions are created, interactively, for the atomic arrangements of virtually all known molecules and crystals.

We will prepare a "pipeline" into which crystallographic information enters from two curated open access crystallographic databases, is manipulated to create the desired 3D models, and then is exported in either STL format (the standard for monochrome 3D printing) or VRML/X3D (the ISO successor to STL). The two aforementioned databases are the North-American mirror of the Crystallography Open Database (http://nanocrystallography.org) …

Fe Analysis Of Alternative Thermal Breaks For Steel Buildings, Salih Q. Mahmood

Student Research Symposium

“Thermal bridge” is a term used for structural or non-structural elements that have higher heat transfer than any other elements or spots in the building envelope, reducing the efficiency of the building thermal insulation. About 20% of the heat occurs via such thermal bridges. Thermal insulations (thermal breaks) are used within a steel connection to mitigate the effect of thermal bridges. In this research, connections with steel fillers studied by Dusicka (2007) were simulated using the finite element (FE) program ABAQUS. The results from the FE model were validated with those from the experimental work done by Dusicka (2007) and …

Monitoring Of Applied Stress In Concrete Using Ultrasonic Full-Waveform Comparison Techniques, Ali Hafiz

Student Research Symposium

Ultrasonic testing is a non-destructive approach commonly used to evaluate concrete structures. A challenge with concrete is that it is heterogeneous, which causes multiple wave scattering resulting in longer and more complex wave paths. The recorded ultrasonic waveform can be divided into two portions: the coherent (or early) and the diffuse (or Coda) portion. While conventional methods only use the coherent portion, e.g. the first wave arrival to determine the wave velocity, we are interested in the entire waveform, i.e. until the wave amplitude is completely dampened out. The objective of this study was to determine what portion of the …

Understanding Photovoltaic Properties Of Pbs Quantum Dot Solids Via Solution Contacting, Vitalii Dereviankin, Erik Johansson

Student Research Symposium

Photovoltaic (PV) devices based on PbS quantum dot (QD) solids demonstrate high photontoelectron conversion yields. However, record power conversion efficiency remain low, in part due to small photovoltages, which in turn are affected by both bulk and interfacial defects. Their relative impacts on limiting the photovoltaic performance of QD solids are not known. Interfacial defects can be formed when contacting a semiconductor and may dominate the semiconductor/metal or metaloxide junction properties. The objective of this study is to explore whether electrochemical contacting using liquid electrolytes provides means of contacting QD solids without introducing interfacial defects. We have initially focused on …

Extended Saleh Model For Behavioral Modeling Of Envelope Tracking Power Amplifiers, Haider Al Kanan, Fu Li, Felice Francesco Tafuri

Student Research Symposium

Envelope Tracking (ET) is one of the most deployed efficiency enhancement techniques to improve efficiency of RF Power Amplifiers (PAs) in wireless communication. ET PA behavioral models are important to predict the impact of the nonlinear distortion, and memory effect of ET PA on the spectrum in wireless communication. ET PA linearization techniques can be designed based on the behavioral modeling.

Speculations On A City For Mars, Edouard Terzis

School of Architecture - Theses

This thesis proposes the reinterpretation of architectural forms as the index of the constitution of the idea of the city. “Speculations on a City on Mars” is paradoxical in a sense as it superposes both the managerial representation of a city, that is Zoning, along with the speculative aspect of an extra-terrestrial city.

Single Use Droplet Based Microfluidics – Screening Tools For Biotechnology And Life-Sciences, Alexander Groß, Jialan Cao, Stefen Schneider, J.M. Köhler, Thomas Henkel, Martin Roth, Mark Kielpinsky, Alexander Mendel

Single-use Technologies II: Bridging Polymer Science to Biotechnology Applications

In the recent years droplet-based microfluidic techniques were developed and used for various screening purposes mainly in the field of life-sciences and biotechnology. Therefore, droplet volumes in a range from pL to μL were used and different technology platforms were necessary to produce the required fluidic devices which made of various materials. Traditionally, lithography combined with etching processes were used to produce precise glass or silicon devices. But, hot embossing and injection molding techniques are better suited for the production of single use devices. Recently, 3D-printing technologies are under development for the generation of individual costumes made microfluidic devices in …

2017 Spring Engr333 Seminar Presentation, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jennifer Haney, Joel Hoskins, Caleb Senyshyn, Alex Meador, Scott Bokach, Devin Auld, Joshua Bronner, Elliot Slenk, Matthew Lenko, Robert Lanser, Ryan Hoek, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Sam Hanover, Dan Wharton, Jay Noyola, Zachary Mouw, John Lee, Daniel Dick, Jonathan Sager, Nathan Swaim, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, Adam Christensen, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

File for student presentation, given by students in the Spring 2017 class of ENGR333.

Methanol Steam Reforming: Na Doping Of Pt/Ysz Provides Fine Tuning Of Selectivity, Michela Martinelli, Gary Jacobs, Uschi M. Graham, Burtron H. Davis

Center for Applied Energy Research Faculty and Staff Publications

In this work, we found that sodium doping can be used to improve CO₂ selectivity for supported Pt catalyst during methanol steam reforming. These materials are usually very active in the low temperature range; however, they are characterized by high selectivity of CO, which is a poison in downstream polymer electrolyte membrane fuel cells (PEM-FC) application. With Na doping, we found that CO₂ selectivity was higher than 90% when 2.5 wt.% of sodium was added to Pt/YSZ. We have speculated that the different product distribution is due to a different reaction pathway being opened for CH₃OH …

Precoder Design For Simultaneous Wireless Information And Power Transfer With Finite-Alphabet Inputs, Xiaodong Zhu, Weiliang Zeng, Chengshan Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we investigate the mutual information maximization for a multiple-input multiple-output (MIMO) system with simultaneous wireless information and power transfer (SWIPT), where perfect channel state information (CSI) is known at the transmitter. We formulate an optimization problem under the constraints of transmit power and harvested energy. Different from previous work, we assume the input signals to be taken from finite-alphabet inputs instead of Gaussian signals. The formulated problem is NP-hard, so a global optimal solution cannot be found with polynomial time complexity. However, by exploiting the structure of the problem, this optimization problem can be transformed into a …

Mineral Matter Redistribution And Transformation During Pulverized Coal Combustion, Noman Sadi

Student Theses and Dissertations

In this study, a sub-bituminous coal was theoretically analyzed. Interpreting the CCSEM analysis data, the mass weight percent of included and excluded minerals in the entire mineral group was calculated to determine the mineral particles number. Coal particles size and mass distribution was calculated using Malvern analysis. Included mineral particles before combustion were redistributed into the coal matrix. Based on the statistical results of previous studies, fragmentation and coalescence of included and excluded minerals after combustion were calculated. Total number of residual ash particles with the details of their mass and size distribution in mineral groups were calculated. After transformation, …

It's No Accident: Evaluating The Effectiveness Of Vehicle Safety Inspections, Alex Hoagland, Trevor Woolley

FHSS Mentored Research Conference

Traffic fatalities have fallen steadily over the past two decades, particularly those due to car failure. Many have attributed this fall to safer vehicle technology. This trend has led many states to reevaluate mandatory vehicle safety inspection programs. This study sought to answer the question, does the elimination of vehicle safety inspections have an effect on traffic fatalities?

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-8), Dylan T. Meyer, Karla A. Lechtenberg, Ronald K. Faller, Robert W. Bielenberg, Scott K. Rosenbaugh, John D. Reid

Nebraska Department of Transportation: Research Reports

The Midwest States Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension cable median barrier for use in a 6H:1V V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWP) spaced at 8 to 16 ft (2.4-4.9 m) intervals, and a bolted, tabbed bracket to attach three or four cables to the sides of each post. According to the Manual for Assessing Safety Hardware (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale tests are required to evaluate the safety performance of a system. A ninth …

3-D Printing Open-Source Click-Muac Bands For Identification Of Malnutrition, Ross Michaels, Joshua M. Pearce

Department of Materials Science and Engineering Publications

No abstract provided.

Biomaterials For Local, Controlled Drug Delivery To The Injured Spinal Cord, Alexis M. Ziemba, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Affecting approximately 17,000 new people each year, spinal cord injury (SCI) is a devastating injury that leads to permanent paraplegia or tetraplegia. Current pharmacological approaches are limited in their ability to ameliorate this injury pathophysiology, as many are not delivered locally, for a sustained duration, or at the correct injury time point. With this review, we aim to communicate the importance of combinatorial biomaterial and pharmacological approaches that target certain aspects of the dynamically changing pathophysiology of SCI. After reviewing the pathophysiology timeline, we present experimental biomaterial approaches to provide local sustained doses of drug. In this review, we present …

Pilot Source Study 2015: A Comparison Of Performance At Part 121 Regional Airlines Between Pilots Hired Before The U.S. Congress Passed Public Law 111-216 And Pilots Hired After The Law’S Effective Date, Maryjo O. Smith, Guy M. Smith, Elizabeth Bjerke, Cody Christensen, Thomas Q. Carney, Paul A. Craig, Mary Niemczyk

Journal of Aviation Technology and Engineering

This article is the third in a series of reports called Pilot Source Study 2015. In 2010, when the U.S. Congress considered dramatic changes to airline pilot qualifications, researchers from the ‘‘Pilot Source Study 2010’’ sampled pilots from six regional airlines to investigate how pilots’ backgrounds affected their performance in airline training. In 2012, when the FAA proposed rulemaking to implement Public Law 111-216, the ‘‘Pilot Source Study 2012’’ researchers repeated the study with a new sample of pilots from seven different regional airlines. Data from these two studies were combined into a Pre-Law dataset. On August 1, 2013, the …

Of Sut And Stainless, Manuel Carrondo

Single-use Technologies II: Bridging Polymer Science to Biotechnology Applications

No Abstract, Please Click And See The Presentation.