Engineering Commons^™

Ferroelectric-Semiconductor Systems For New Generation Of Solar Cells, Rahmatollah Eskandari

LSU New Orleans Theses and Dissertations

This dissertation includes two parts. In the first part the study is focused on the fabrication of multifunctional thin films for photovoltaic applications. There is no doubt about the importance of transforming world reliance from traditional energy resources, mainly fossil fuel, into renewable energies. Photovoltaic section still owns very small portion of the production, despite its fast growth and vast research investments. New methods and concepts are proposed in order to improve the efficiency of traditional solar cells or introduce new platforms. Recently, ferroelectric photovoltaics have gained interest among researchers. First objective in application of ferroelectric material is to utilize …

Motion Dynamics Of Dropped Cylindrical Objects, Gong Xiang

LSU New Orleans Theses and Dissertations

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry. Objects may be dropped during lifting or any other offshore operation. Concerns of health, safety, and the environment (HSE) as well as possible damages to structures require the prediction of where and how a dropped object moves underwater. This study of dropped objects is subdivided into three parts. In the first part, the experimental and simulated results published by Aanesland (1987) have been successfully reproduced and validated based on a two-dimensional (2D) theory for a dropped drilling pipe model. A new …

Improving A Particle Swarm Optimization-Based Clustering Method, Sharif Shahadat

LSU New Orleans Theses and Dissertations

This thesis discusses clustering related works with emphasis on Particle Swarm Optimization (PSO) principles. Specifically, we review in detail the PSO clustering algorithm proposed by Van Der Merwe & Engelbrecht, the particle swarm clustering (PSC) algorithm proposed by Cohen & de Castro, Szabo’s modified PSC (mPSC), and Georgieva & Engelbrecht’s Cooperative-Multi-Population PSO (CMPSO). In this thesis, an improvement over Van Der Merwe & Engelbrecht’s PSO clustering has been proposed and tested for standard datasets. The improvements observed in those experiments vary from slight to moderate, both in terms of minimizing the cost function, and in terms of run time.

Embedded Processors On Fpga: Hard-Core Vs Soft-Core, Vivek J. Vazhoth Kanhiroth

Masters Theses

Field Programmable Gate Arrays (FPGAs) are integrated circuits (ICs) that can be reprogrammed by the consumer after manufacturing. They are based on a matrix of configurable logic blocks connected via programmable interconnects that enables the designer to quickly recreate hardware circuits. In the past, FPGAs were primarily used for prototyping and debugging purposes. However, with their increased popularity, many commercial products now incorporate FPGAs.

In the late 1990s, FPGA vendors introduced System-on-chip (SoC) devices that housed one or more hard-core processors and an FPGA fabric on a single IC to allow for more complex designs that involved hardware and software …

Schedule And Cost Performance Analysis And Prediction In Louisiana Dotd, Mahmoud Hamide

LSU New Orleans Theses and Dissertations

Many construction projects in the United States are facing the risk of cost overrun and schedule delays. This is also happening here in the State of Louisiana. When these things happen, it causes cost overrun which can then be passed on to the tax payers and may also cause the state to take on less projects than they normal. Many researchers have studied the reasons behind both the cost overrun and the delays resulting in private firms, developing project management tools and best practices to prevent this risk. In this research, I aim to study the historical trend in 2912 …

A Computational Fluid Dynamics Study On Bidirectional Glenn Shunt Flow With An Additional Pulsatile Flow Through A Modified Blalock-Taussig Shunt, Seda Aslan

LSU New Orleans Theses and Dissertations

The blood flow through the Bidirectional Glenn shunt (BGS) and modified Blalock-Taussig shunt (mBTS) to the pulmonary arteries (PAs) was analyzed using Computational Fluid Dynamics. This study consisted of the steady and pulsatile cases. In case one, the results of blood flow through the BGS for the Newtonian and non-Newtonian viscosity models were compared. Case two focused on having an additional pulsatile blood flow through the mBTS using the non-Newtonian Carreau viscosity model. The geometries were created based on the angiograms. In case one, boundary conditions to be specified at the inlets were obtained from the flow rate measurements via …

An Experimental Study In The Hydroelastic Response Of An Aluminum Wedge In Drop Tests, Jonathan R. Eastridge

LSU New Orleans Theses and Dissertations

Slamming of marine planing craft is expected to arise due to the high speed nature of their operating conditions. High hydrodynamic forces are inevitably induced causing the shell plating to deflect, which in turn can influence the flow physics surrounding the hull. In order to study the hull’s hydroelastic response due to a slamming event, wedge drop experiments were performed with an aluminum wedge of 57 inches in length, 47 inches in breadth, and 20 degree deadrise with 1/4 in. thick unstiffened bottom panels. The elastic behavior of the hull plating was measured via two methods. The first method uses …

Small Uas Detect And Avoid Requirements Necessary For Limited Beyond Visual Line Of Sight (Bvlos) Operations, Mark Askelson, Henry Cathey, Ronald Marsh, Zachary P. Waller, Paul Snyder, Gary M. Ullrich, Chris Theisen, Naima Kaabouch, William Semke, Michael Mullins, Kyle Foerster, Rosa Brothman, Stephen B. Hottman, Kerry Williamson, Eric Johnson, Alexander Vanhoudt, Zachariah Larue

Aviation Faculty Publications

Potential small Unmanned Aircraft Systems (sUAS) beyond visual line of sight (BVLOS) operational scenarios/use cases and Detect And Avoid (DAA) approaches were collected through a number of industry wide data calls. Every 333 Exemption holder was solicited for this same information. Summary information from more than 5,000 exemption holders is documented, and the information received had varied level of detail but has given relevant experiential information to generalize use cases. A plan was developed and testing completed to assess Radio Line Of Sight (RLOS), a potential key limiting factors for safe BVLOS ops. Details of the equipment used, flight test …

Temperature Corrected Turbulence Models For High Speed Compressible Flows, Shuai Shuai

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Computational Fluid Dynamics Modeling And Simulations Of Fast Fluidized Bed And Moving Bed Reactors For Chemical Looping Combustion, Mengqiao Yang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Chemical-looping combustion (CLC) is a next generation carbon capture technology with high efficiency and low cost. To assess the potential of this technology for industrial scale power plants, thousands of laboratory scale and many pilot-scale plants have been designed and tested. In recent years, to obtain a thorough understanding of the hydrodynamic behavior inside the reactors and chemical looping combustion process, high-fidelity numerical simulation using Computational Fluid Dynamics(CFD) have been performed. However, CFD simulations in the literature have been limited reported compared to the laboratory scale experiments.

In this thesis, cold flow simulations of a CLC fuel reactor are performed …

Design And Computational Fluid Dynamics Analysis Of An Idealized Modern Wingsuit, Maria E. Ferguson

McKelvey School of Engineering Graduate Student Theses & Dissertations

The aerodynamics of a modern wingsuit has been the subject of very few detailed scientific studies to date. The prevailing design process remains the dangerous “sew and fly” method, in which designs are tested when they are first flown. This study utilizes Computational Fluid Dynamics (CFD) tools to analyze the flow field and aerodynamics of an idealized wingsuit, which is designed using Computer-Aided Design (CAD) modeling. The 3D CAD software Autodesk Inventor is used to create the wingsuit model, which is designed with a Gottingen 228 airfoil cross-section and a relatively large planform of aspect ratio 1.3. The commercial flow …

Uncertainty Quantification Of Turbulence Model Closure Coefficients On Openfoam And Fluent For Mildly Separated Flows, Ike Witte

McKelvey School of Engineering Graduate Student Theses & Dissertations

In this thesis, detailed uncertainty quantification studies focusing on the closure coefficients of eddy-viscosity turbulence models for several flows using two CFD solvers have been performed. Three eddy viscosity turbulence models considered are: the one-equation Spalart-Allmaras (SA) model, the two-equation Shear Stress Transport (SST) k-ω model, and the one-equation Wray-Agarwal (WA) model. OpenFOAM and ANSYS Fluent are used as flow solvers. Uncertainty quantification analyses are performed for subsonic flow over a flat plate, subsonic flow over a backward-facing step, and transonic flow past an axisymmetric bump. In the case of flat plate, coefficients of pressure, lift, drag, and skin friction …

Numerical Simulation Of Enhancement In Co2 Sequestration With Various Water Production Schemes Under Multiple Well Scenarios, Li Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

CO₂ geological sequestration simultaneously combined with water production from deep saline aquifers can effectively address the challenge faced by the modern energy systems for reducing the CO₂ emissions and water intensity while providing reliable, affordable, and secure energy. However, little attention has been paid to date in the literature on determining the best CO₂ injection strategy for achieving both the optimal water production and the optimal CO₂ space storage capacity while maintaining operational safety. This research first establishes three injection-extraction scenarios based on the typical geological parameters of the Junggar Basin in China to analyze the …

Cfd Simulations Of Chemical Looping Combustion In A Packed Bed And A Bubbling Bed Fuel Reactor, Guanglei Ma

McKelvey School of Engineering Graduate Student Theses & Dissertations

Chemical-looping combustion (CLC) is a next generation combustion technology that has shown great promise in addressing the need for high-efficiency low-cost carbon capture from fossil fueled power plants to address the rising carbon emissions. Although there have been a number of experimental studies on CLC in recent years, CFD simulations have been limited in the literature on CLC. The development and confidence in high-fidelity simulations of the CLC process is a necessary step towards facilitating the transition from laboratory-scale experiments to deployment of this technology on an industrial scale. In this research, first the CFD simulations of a CLC packed …

Numerical Drag Prediction Of Nasa Common Research Models Using Different Turbulence Models, Pan Du

McKelvey School of Engineering Graduate Student Theses & Dissertations

The goal of this research is to perform 3D turbulence flow simulations to predict the drag of Wing-body-tail (WBT) and Wing-body-nacelle-Pylon (WBNP) aircraft configurations from NASA Common Research Models. These configurations are also part of the 4th and 6th AIAA Drag Prediction Workshops in which CFD modelers have participated worldwide. The computations are performed using CFD solver ANSYS FLUENT. The compressible Reynolds-Averaged Navier-Stokes (RANS) equations are solved using two turbulence models – the Spalart-Allmaras (SA) and SST k-ω. Drag polar and drag rise curves are obtained by performing computations at different angles of attack at a constant Mach number. Pressure …

Aerodynamics And Vortex Structures Of A Flapping Airfoil In Forward Flight In Proximity Of Ground, Hang Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

The traditional flapping wing high lift mechanism research mainly focuses on the wing in unbounded flow. However, the real insect flight includes not only the unbounded flow field but also the near-surface flight. Therefore, research on near-surface flight can help reveal the high-lift mechanism of insect flight and should also be beneficial to the research on Micro-Air-Vehicles (MAV). In this thesis, the flow fields of an airfoil in hover and forward flight are simulated in the presence of ground by newly available function of “dynamic meshing” in ANSYS Fluent is employed. The characteristics of aerodynamics, pressure distribution, and vortex structure …

Aerodynamics And Shock Buffet Of A Transonic Airfoil In Ground Effect, Boshun Gao

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Numerical Determination Of Critical Mach Number Of A Three-Element Airfoil In Unbounded Flow And In Ground Effect, Bowen Hu

McKelvey School of Engineering Graduate Student Theses & Dissertations

The critical Mach number is an important property of airfoils on aerodynamics. When the freestream Mach number exceeds the critical Mach number, shock will appear on the aircraft and cause a huge loss of energy. Lift decreases sharply and drag increases dramatically. We usually hope to increase the critical Mach number and delay the occurrence of shock so that the aircraft can fly with a higher speed and carry more weight.

In this thesis, the main task is to determine the critical Mach number of multi-element airfoil 30P30N in unbounded flow and in ground effect. Commercial software ICEM is employed …

Numerical Simulation Of Flows Past A Circular And A Square Cylinder At High Reynolds Number, And A Curved Plate In Transitional Flow, Ling Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Increasing the prediction accuracy and computational efficiency of turbulence models at high Reynolds number remains a challenging problem in Computational Fluid Dynamics (CFD). In this paper, several turbulence models are applied for numerical simulation of flow past a circular and a square cylinder at high Reynolds number. Wray-Agarwal (WA) turbulence model is a recently developed one-equation turbulence model derived from k-w closure. Comparisons are made among computational results from WA model, Spalart-Allmaras (SA) model, the shear stress transport SST k-w model and the standard Wilcox k-w model. For circular cylinder, the computations are performed for Reynolds numbers and and simulation …

Uncertainty Quantification And Propagation Of Errors Of The Lennard-Jones 12-6 Parameters For N-Alkanes, Richard A. Messerly, Thomas A. Knotts Iv, W Vincent Wilding

Faculty Publications

Molecular simulation has the ability to predict various physical properties that are difficult to obtain experimentally. For example, we implement molecular simulation to predict the critical constants (i.e., critical temperature, critical density, critical pressure, and critical compressibility factor) for large n-alkanes that thermally decompose experimentally (as large as C₄₈). Historically, molecular simulation has been viewed as a tool that is limited to providing qualitative insight. One key reason for this perceived weakness in molecular simulation is the difficulty to quantify the uncertainty in the results. This is because molecular simulations have many sources of uncertainty that propagate …

Preliminary Study Of Optimization Of Normal Pulse Voltammetry For Actinide Measurement In Molten Salt Electrorefiners Using Licl-Kcl-Ucl3-Mgcl2 As A Surrogate Salt, Chao Zhang, Devin Rappleye, Michael Simpson

Faculty Publications

Normal pulse voltammetry has been applied and optimized to develop correlations between diffusional current and concentration for UCl₃ and MgCl₂ in molten eutectic LiCl-KCl. This method was selected to mitigate working electrode area growth in concentrated molten salt mixtures in which a fairly wide potential range is needed to analyze all actinides. MgCl₂ has been selected as a surrogate for PuCl₃ based on similar standard reduction potential. Diffusional current plateaus were successfully attained by adjusting the step size to 0.03 V. Relaxation time of 15 seconds was found to be sufficient to recover after each pulse. …

Real Time Learning Level Assessment Using Eye Tracking, Saurin S. Parikh, Hari Kalva

MODVIS Workshop

E-Learning is emerging as a convenient and effective learning tool. However, the challenge with eLearning is the lack of effective tools to assess levels of learning. Ability to predict difficult content in real time enables eLearning systems to dynamically provide supplementary content to meet learners’ needs. Recent developments have made possible low-cost eye trackers, which enables a new class of applications based on eye response. In comparison to past attempts using bio-metrics in learning assessments, with eye tracking, we can have access to the exact stimulus that is causing the response. A key aspect of the proposed approach is the …

A Time-Series Forecasting Model For Windhoek Rainfall, Namibia, Godfrey T. Pazvakawambwa

Andrews Research Conference

The objective of the study was to use time series forecasting techniques to model Windhoek rainfall based on secondary monthly data from 1891 to 2011. Descriptive summary statistics in the form of measures of centrality and dispersion, time series plots, and autocorrelation functions were generated using R time series statistical software. The Box Jenkin’s ARIMA modelling procedure (model identification, model estimation, model validation) was used to determine the best models for the data. Model diagnostics based on residual analysis were performed to assess the adequacy of the identified models. The final model was then used to forecast monthly rainfall for …

Modeling Accommodation Control Of The Human Eye: Chromatic Aberration And Color Opponency, Agostino Gibaldi, Steven A. Cholewiak, Marty S. Banks

MODVIS Workshop

Accommodation is the process by which the eye lens changes optical power to maintain a clear retinal image as the distance to the fixated object varies. Although luminance blur has long been considered the driving feature for accommodation, it is by definition unsigned (i.e., there is no difference between the defocus of an object closer or farther than the focus distance). Nonetheless, the visual system initially accommodates in the correct direction, implying that it exploits a cue with sign information. Here, we present a model of accommodation control based on such a cue: Longitudinal Chromatic Aberration (LCA). The model relies …

Color Algebras, Jeffrey B. Mulligan

MODVIS Workshop

No abstract provided.

Evaluating The Impacts Of Farmers’ Behaviors On A Hypothetical Agricultural Water Market Based On Double Auction, Erhu Du, Ximing Cai, Barbara Minsker

Daugherty Water for Food Global Institute: Faculty Publications

Agricultural water markets are considered effective instruments to mitigate the impacts of water scarcity and to increase crop production. However, previous studies have limited understanding of how farmers’ behaviors affect the performance of water markets. This study develops an agent-based model to explicitly incorporate farmers’ behaviors, namely irrigation behavior (represented by farmers’ sensitivity to soil water deficit k) and bidding behavior (represented by farmers’ rent seeking l and learning rate b), in a hypothetical water market based on a double auction. The model is applied to the Guadalupe River Basin in Texas to simulate a hypothetical agricultural water market under …

2017 Spring Engr333 Project Final Report (Section A), Devin Auld, Scott Bokach, Joshua Bronner, Alex Meador, Ryan Hoek, Robert Lanser, Matthew Lenko, Elliot Slenk, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jenny Haney, Joel Hoskins, Caleb Senyshyn

ENGR 333

The objective of ENGR-333-A was to develop a well-defined, bottom-up energy demand model for the energy consumption of the dormitories on Calvin College’s campus for each year of the past decade within an accuracy of ± 2%.

2017 Spring Engr333 Project Final Report (Section B), Daniel Dick, Nathan Swaim, Jonathan Sager, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, John Lee, Zach Mouw, Daniel Wharton, Sam Hanover, Jay Noyola, Adam Christenson, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

The Physical Education Complex is located in the North-end of Calvin College’s campus, and supports many athletic, academic, event and recreational functions. Due to its heavy use, the complex contributes 20% of the College’s electricity consumption. Monetarily, this equated to electricity costs of about $385,000 last year. With these financial implications, the College is searching for ways to reduce the cost. While there is little to no room for electricity cost rate reductions, there is opportunity for improvement through the implementation of more efficient components. However, the sources of electricity demand are largely unknown. Our objective is to develop a …

A Tunable, Three-Dimensional In Vitro Culture Model Of Growth Plate Cartilage Using Alginate Hydrogel Scaffolds, Alek G. Erickson, Taylor D. Laughlin, Sarah Romereim, Catherine Sargus-Patino, Angela K. Pannier, Andrew T. Dudley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Defining the final size and geometry of engineered tissues through precise control of the scalar and vector components of tissue growth is a necessary benchmark for regenerative medicine, but it has proved to be a significant challenge for tissue engineers. The growth plate cartilage that promotes elongation of the long bones is a good model system for studying morphogenetic mechanisms because cartilage is composed of a single cell type, the chondrocyte; chondrocytes are readily maintained in culture; and growth trajectory is predominately in a single vector. In this cartilage, growth is generated via a differentiation program that is spatially and …

Numerical Study Of The Aerodynamics Of Dlr-F6 Wing-Body In Unbounded Flow Field And In Ground Effect, Ning Deng

McKelvey School of Engineering Graduate Student Theses & Dissertations

The main focus of this thesis is on the simulation of flow past a three-dimensional wing-body configuration (DLR-F6) in ground effect; a complex 3D wing-body configuration in ground effect has never been analyzed in the aerodynamics literature to date. For the purpose of validation of the simulation approach, computations are performed for the DLR-F6 wing-body in unbounded flow and are compared with the experimental data. The commercial CFD solver ANSYS FLUENT is employed for computations. Compressible Reynolds-Averaged Navier-Stokes (RANS) equations in conjunction with Spalart-Allmaras (SA) and - Shear Stress Transport (SST) turbulence models are solved. The validated code is employed …