Engineering Commons^™

Students Are The Engine Of Swbec | Sustainable Waste-To-Bioproducts Engineering Center, Usu College Of Engineering

College of Engineering News

More than 10 projects for 2017 include 20 students total with 6 graduate students and 14 undergraduate students.

Maximizing Operating Room Performance Using Portfolio Selection, Vivek Reddy Gunna, Amin Abedini, Wei Li

Mechanical Engineering Faculty Publications

The operating room (OR) is responsible for most hospital admissions and is one of the most cost and work intensive areas in the hospital. From recent trends, we observe an ironic parallel increase among expenditure and waiting time. Therefore, improving OR scheduling has become obligatory, particularly in terms of patient flow and benefit. Most of the hospitals rely on average patient arrivals and processing times in OR planning. But in practice, variations in arrivals and processing times causes high instability in OR performance. Our model of optimization provides OR schedules maximizing patient flow and benefit at a fixed level of …

An Optimization Model For Operating Room Scheduling To Reduce Blocking Across The Perioperative Process, Amin Abedini, Wei Li, Honghan Ye

Mechanical Engineering Faculty Publications

Operating room (OR) scheduling is important. Because of increasing demand for surgical services, hospitals must provide high quality care more efficiently with limited resources. When constructing the OR schedule, it is necessary to consider the availability of downstream resources, such as intensive care unit (ICU) and post anaesthesia care unit (PACU). The unavailability of downstream resources causes blockings between every two consecutive stages. In this paper we address the master surgical schedule (MSS) problem in order to minimize blockings between two consecutive stages. First, we present a blocking minimization (BM) model for the MSS by using integer programming, based on …

Effect Of Austempering Time On The Microstructure And Carbon Partitioning Of Ultrahigh Strength Steel 56nicrmov7, Quanshun Luo, Matthew Kitchen, Shahriar Abubakri

Henry M. Rowan College of Engineering Departmental Research

Ultrahigh strength steel 56NiCrMoV7 was austempered at 270 °C for different durations in order to investigate the microstructure evolution, carbon partitioning behaviour and hardness property. Detailed microstructure has been characterised using optical microscopy and field emission gun scanning electron microscopy. A newly developed X-ray diffraction method has been employed to dissolve the bainitic/martensitic ferrite phase as two sub-phases of different tetragonal ratios, which provides quantitative analyses of the carbon partitioning between the resultant ferrites and the retained austenite. The results show that, a short-term austempering treatment was in the incubation period of the bainite transformation, which resulted in maximum hardness …

Meniscus-Assisted Solution Printing Of Largegrained Perovskite Films For High-Efficiency Solar Cells, Ming He, Bo Li, Xun Cui, Beibei Jiang, Yanjie He, Yihuang Chen, Daniel O'Neil, Paul Szymanski, Mostafa A. El-Sayed, Jinsong Huang, Zhiqun Lin

Department of Mechanical and Materials Engineering: Faculty Publications

Control over morphology and crystallinity of metal halide perovskite films is of key importance to enable high-performance optoelectronics. However, this remains particularly challenging for solution-printed devices due to the complex crystallization kinetics of semiconductor materials within dynamic flow of inks. Here we report a simple yet effective meniscus-assisted solution printing (MASP) strategy to yield large-grained dense perovskite film with good crystallization and preferred orientation. Intriguingly, the outward convective flow triggered by fast solvent evaporation at the edge of the meniscus ink imparts the transport of perovskite solutes, thus facilitating the growth of micrometre-scale perovskite grains. The growth kinetics of perovskite …

Impact Analysis Of Increased Dispatchable Resources On A Utility Feeder In Opendss, Crystal Eppinger

Dissertations and Theses

Oregon utilities are replacing their portfolios of traditional fossil fuel generation with renewable generating sources. Stepping away from carbon-producing energy will leave a deficit of on-demand power, resulting in decreased reliability. To overcome these technical challenges, utilities must maximize the use of their present dispatchable resources. One such resource is the Portland General Electric (PGE) Dispatchable Standby Generation Program (DSG), which is an aggregated 105 MWs of distributed generation (DG). These resources are brought on-line when there is a critical need for power. Resources are added to the program if a transfer trip scheme is in place or a modeling …

A Multiscale Modeling Study Of The Mammary Gland, Joseph D. Butner

Biomedical Engineering ETDs

Multiscale, hybrid computer modeling has emerged as a valuable tool in the fields of computational systems biology and mathematical oncology. In this work, we present an overview of the motivations for, and development and implementation of, three hybrid multiscale models of the mammary gland system and early stage ductal carcinoma in situ (DCIS) in the gland. Pubertal mammary gland development was described first using a two-dimensional, lattice-based hybrid agent-based model description of the mammary terminal end bud (TEB), and then with a three-dimensional lattice-free TEB model. Both models implement a discrete, agent-based description of the cell scale, and a continuum, …

An Operationalized Model For Defining Computational Thinking, Tony A. Lowe, Sean B. Brophy

School of Engineering Education Graduate Student Series

The Computational Thinking (CT) conceptual framework is entering its second decade of research yet still lacks a cohesive definition by which the field can coalesce. The lack of clear definition makes assessment tool challenging to formulate, pedagogical efforts difficult to compare, and research difficult to synthesize. This paper looks to operationalize differing definitions of CT enhancing the ability to teach then assess the presence of CT. Expanding upon CT definitions, industry practices and processes, and educational theory, we link existing concepts and propose a new element to model an active definition of CT as a theoretical framework to guide future …

Packet Scheduling Algorithms In Lte/Lte-A Cellular Networks: Multi-Agent Q-Learning Approach, Najem Nafiz Sirhan

Electrical and Computer Engineering ETDs

Spectrum utilization is vital for mobile operators. It ensures an efficient use of spectrum bands, especially when obtaining their license is highly expensive. Long Term Evolution (LTE), and LTE-Advanced (LTE-A) spectrum bands license were auctioned by the Federal Communication Commission (FCC) to mobile operators with hundreds of millions of dollars. In the first part of this dissertation, we study, analyze, and compare the QoS performance of QoS-aware/Channel-aware packet scheduling algorithms while using CA over LTE, and LTE-A heterogeneous cellular networks. This included a detailed study of the LTE/LTE-A cellular network and its features, and the modification of an open source …

Effect Of Formation Hydrodynamics On Mechanical Properties Of Container Materials, Barry Hojjatie Dr, D. W. Coffin, C. K. Aidun

Georgia Journal of Science

The objectives of this study were to compare the mechanical and physical properties of the sheets made using the Vortigen technology (a non-conventional technique that creates very high number vortices in a fluid flow mixture of water, fibers, and chemical additives) with those produced from a conventional method of papermaking and to provide insight into the impact of formation hydrodynamics on sheet properties. The results of formation, ultrasonic stiffness, and creep/accelerated creep measurements of the Vortigen sheets as compared with the standard sheets are presented. Samples of Vortigen (V) and standard (S) sheets (4 samples from each group) were obtained …

Study Of Polysulfide Speciation In Lithium Sulfur Batteries Using In Situ Confocal Raman Microscopy, Josefine Mcbrayer

Nanoscience and Microsystems ETDs

Secondary lithium sulfur (Li-S) batteries have been heavily studied in the battery community since the start of the 21^st century due to their high theoretical capacity and specific energy density. The ground-breaking lithium ion battery has revolutionized society and its ability to store energy, however the lithium ion battery is reaching its limit with a theoretical capacity almost five times lower than that of lithium sulfur. With the improvement and commercialization of Li-S batteries, electric vehicles and personal electronics will have extended performance on a single charge. The viability of this promising chemistry relies on overcoming several key difficulties, …

Implementing Conditional Inequality Constraints For Optimal Collision Avoidance, Nathan E. Smith, Christopher D. Arendt, Richard G. Cobb, Jonah A. Reeger

Faculty Publications

Current Federal Aviation Administration regulations require that passing aircraft must either meet a specified horizontal or vertical separation distance. However, solving for optimal avoidance trajectories with conditional inequality path constraints is problematic for gradient-based numerical nonlinear programming solvers since conditional constraints typically possess non-differentiable points. Further, the literature is silent on robust treatment of approximation methods to implement conditional inequality path constraints for gradient-based numerical nonlinear programming solvers. This paper proposes two efficient methods to enforce conditional inequality path constraints in the optimal control problem formulation and compares and contrasts these approaches on representative airborne avoidance scenarios. The first approach …

Novel Transducer Calibration And Simulation Verification Of Polydimethylsiloxane (Pdms) Channels On Acoustic Microfluidic Devices, Scott T. Padilla

USF Tampa Graduate Theses and Dissertations

The work and results presented in this dissertation concern two complimentary studies that are rooted in surface acoustic waves and transducer study.

Surface acoustic wave devices are utilized in a variety of fields that span biomedical applications to radio wave transmitters and receivers. Of interest in this dissertation is the study of surface acoustic wave interaction with polydimethylsiloxane. This material, commonly known as PDMS, is widely used in the microfluidic field applications in order to create channels for fluid flow on the surface of a piezoelectric substrate. The size, and type of PDMS that is created and ultimately etched on …

Advanced Treatment Technologies For Mitigation Of Nitrogen And Off-Flavor Compounds In Onsite Wastewater Treatment And Recirculating Aquaculture Systems, Laura C. Rodriguez-Gonzalez

USF Tampa Graduate Theses and Dissertations

Non-point sources (NPS) of pollution are non-discernable, diffuse sources of pollution that are often difficult to localize and in turn mitigate. NPS can include stormwater runoff, agricultural/aquaculture wastes and wastes from small decentralized wastewater treatment systems, such as conventional septic systems. The mitigation of these NPS is imperative to reduce their potential detrimental effects on the water environment. This dissertation addresses novel treatment technologies for the mitigation of nutrients, particularly nitrogen, in Recirculating Aquaculture Systems (RAS) and onsite wastewater treatment systems (OWTS). The removal of trace organics limiting RAS production and water reuse were also investigated.

The first question this …

1785 - The Public Land Survey System (Plss)

American Period Maps

Adopted by the United States Congress of Confederation on May 20, 1785, the Land Ordinance was established to provide a means by which the land west of the Appalachian Mountains, north of the Ohio River and East of the Mississippi River could be sold and settled. This article describes the Public Land Survey System (PLSS), a way of subdividing and describing all public domain lands in the United States. Regulated by the U.S. Department of the Interior, the PLSS divides the lands owned by the Federal government into 6-miles square townships and is included in the National Atlas. Townships are …

A Novel Application Of Machine Learning Methods To Model Microcontroller Upset Due To Intentional Electromagnetic Interference, Rusmir Bilalic

Electrical and Computer Engineering ETDs

A novel application of support vector machines (SVMs), artificial neural networks (ANNs), and Gaussian processes (GPs) for machine learning (GPML) to model microcontroller unit (MCU) upset due to intentional electromagnetic interference (IEMI) is presented. In this approach, an MCU performs a counting operation (0-7) while electromagnetic interference in the form of a radio frequency (RF) pulse is direct-injected into the MCU clock line. Injection times with respect to the clock signal are the clock low, clock rising edge, clock high, and the clock falling edge periods in the clock window during which the MCU is performing initialization and executing the …

Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

The Irish Government has requested that Enterprise Ireland, an organisation responsible for the development and growth of Irish enterprises in world markets to actively promote the use of BIM in Ireland. This promotion has taken the form of an opportunity for Enterprise Ireland clients to apply for a grant under their BIM Enable and BIM Implementation schemes and also through their funding of the BIM Innovation Capability Programme (BICP) of Ireland. The BICP is a two-year project (2016-2018) which seeks to capture the capability of the Irish Construction Industry and the Higher Education Institutes to respond to the increased requirement …

Harmonic Distortion Minimization In Power Grids With Wind And Electric Vehicles, Ritam Misra, Sumit Paudyal, Oguzhan Ceylan, Paras Mandal

Michigan Tech Publications, Part 1

Power-electronic interfacing based devices such as wind generators (WGs) and electrical vehicles (EVs) cause harmonic distortions on the power grid. Higher penetration and uncoordinated operation of WGs and EVs can lead to voltage and current harmonic distortions, which may exceed IEEE limits. It is interesting to note that WGs and EVs have some common harmonic profiles. Therefore, when EVs are connected to the grid, the harmonic pollution EVs impart onto the grid can be reduced to some extent by the amount of wind power injecting into the grid and vice versa. In this context, this work studies the impact of …

Bisphosphonate Functionalized Gold Nanoparticles For The Study And Treatment Of Osteoporotic Disease, Christopher Conners

USF Tampa Graduate Theses and Dissertations

The use of nanoparticles for disease treatment is an increasingly popular area of research. The potential for multi-functionality allows nanoparticles to be used as transport and delivery vehicles for drugs and as diagnostic aides, among other applications, to address the unmet needs of many disease treatments. One such class of disease is osteoporosis including severe disorders, like Paget’s disease, Osteogenesis Imperfecta and Legg Calve Perthes disease. In this dissertation, we discuss a nanoparticle system consisting of gold nanoparticles surface functionalized with primary amine bisphosphonates, which is a classification of pharmaceuticals that is common in the treatment of osteoporosis. Functionalized nanoparticles …

Magnetic Field Sensor Based On A Combination Of A Microfiber Coupler Covered With Magnetic Fluid And A Sagnac Loop, Fangfang Wei, Arun Mallik, Dejun Liu, Qiang Wu, Gang-Ding Peng, Gerald Farrell, Yuliya Semenova

Articles

This paper proposes a novel magnetic field sensor based on a microfiber coupler (MFC) combined with a magnetic fluid (MF) in a Sagnac loop formed from a polarization maintaining fiber (PMF). Thanks to the small (~2.6μm) waist diameter of the MFC, the resulting interference is strongly influenced by the presence of the MF and this leads to the desirable high sensitivity of the structure to the applied magnetic field. The maximum magnetic field sensitivities of −100pm/mT and −488pm/mT have been experimentally demonstrated with the PMF lengths of 75cm and 20cm respectively in the range of magnetic field strengths from 0 …

Autonomous Vehicles: An Empirical Assessment Of Consumers’ Perceptions, Intended Adoption, And Impacts On Household Vehicle Ownership, Nikhil Menon

USF Tampa Graduate Theses and Dissertations

Emerging automotive and transportation technologies have provided revolutionary possibilities in the way we might travel in the future. Major car manufacturers and technology giants have demonstrated significant progress in advancing and testing autonomous vehicles in real-life traffic conditions. Governmental agencies are grappling with how to plan transportation systems for a world with autonomous vehicles. Past research has shown that not all technologies are immediately welcomed by the public. Autonomous Vehicles would have to likely go through a similar phase, and would need to overcome not just technological challenges but also social barriers for successful penetration into the marketplace. Most previous …

Real-Time Camera Tracking System Using Optical Flow Feature Points, Daniel D. Doyle, Alan L. Jennings, Jonathan T. Black

AFIT Patents

A new apparatus and method for tracking a moving object with a moving camera provides a real-time, narrow field-of-view, high resolution and on target image by combining commanded motion with an optical flow algorithm for deriving motion and classifying background. Commanded motion means that movement of the pan, tilt and zoom (PTZ) unit is “commanded” by a computer, instead of being observed by the camera, so that the pan, tilt and zoom parameters are known, as opposed to having to be determined, significantly reducing the computational requirements for tracking a moving object. The present invention provides a single camera pan …

Three Hundred And Sixty Degree Real-Time Monitoring Of 3-D Printing Using Computer Analysis Of Two Camera Views, Siranee Nuchitprasitchai, Michael C. Roggemann, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Prosumer (producing consumer)-based desktop additive manufacturing has been enabled by the recent radical reduction in 3-D printer capital costs created by the open-source release of the self-replicating rapid prototype (RepRap). To continue this success, there have been some efforts to improve reliability, which are either too expensive or lacked automation. A promising method to improve reliability is to use computer vision, although the success rates are still too low for widespread use. To overcome these challenges an open source low-cost reliable real-time optimal monitoring platform for 3-D printing from double cameras is presented here. This error detection system is implemented …

Free And Open Source 3-D Model Customizer For Websites To Democratize Design With Openscad, Yuenyong Nilsiam, Joshua M. Pearce

Department of Materials Science and Engineering Publications

3-D printing has entered the consumer market because of recent radical price declines. Consumers can save substantial money by offsetting purchases with DIY pre-designed 3-D printed products. However, even more value can be obtained with distributed manufacturing using mass customization. Unfortunately, the average consumer is not technically sophisticated enough to easily design their own products. One solution to this is the use of an overlay on OpenSCAD parametric code, although current solutions force users to relinquish all rights to their own designs. There is thus a substantial need in the open source design community for a libre 3-D model customizer, …

On Axon-Axon Interaction Via Currents And Fields, Aman Chawla

USF Tampa Graduate Theses and Dissertations

In this dissertation, we investigate coupling between axons in a tract, when the tract has an arbitrary cross-section, with the coupling being mediated by currents as well as electric fields. Under the current mediated setting, we develop a new master equation which captures the relative axonal geometry, specifically, the axon inclinations θ_i and the inter-axon distances W_ip and perform a number of simulations. We observe synchronization in our simulations of axons with differing diameters and separation-dependent coupling delays in the case of non-trivial tract geometries. For the field-mediated interaction setting, we determine the electric near-field of a firing …

Multiple Attributes Decision Fusion For Wireless Sensor Networks Based On Intuitionistic Fuzzy Set, Zhenjiang Zhang, Ziqi Hao, Sherali Zeadally, Jing Zhang, Bowen Han, Han-Chieh Chao

Information Science Faculty Publications

Decision fusion is an important issue in wireless sensor networks (WSN), and intuitionistic fuzzy set (IFS) is a novel method for dealing with uncertain data. We propose a multi-attribute decision fusion model based on IFS, which includes two aspects: data distribution-based IFS construction algorithm (DDBIFCA) and the category similarity weight-based TOPSIS intuitionistic fuzzy decision algorithm (CSWBT-IFS). The DDBIFCA is an IFS construction algorithm that transforms the original attribute values into intuitionistic fuzzy measures, and the CSWBT-IFS is an intuitionistic fuzzy aggregation algorithm improved by the traditional TOPSIS algorithm, which combines intuitionistic fuzzy values of different attributes and obtains a final …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• GenCyber Junior Investigators Camp a Success

Mathematical Description And Mechanistic Reasoning: A Pathway Toward Stem Integration, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Because reasoning about mechanism is critical to disciplined inquiry in science, technology, engineering, and mathematics (STEM) domains, this study focuses on ways to support the development of this form of reasoning. This study attends to how mechanistic reasoning is constituted through mathematical description. This study draws upon Smith’s (2007) characterization of mathematical description of scientific phenomena as ‘‘bootstrapping,’’ where negotiating the relationship between target phenomena and represented relations is fundamental to learning. In addition, the development of mathematical representation presents a viable pathway towards STEM integration. In this study, participants responded to an assessment of mechanistic reasoning while cognitive interviews …

Discontinuous Galerkin Time-Domain Analysis Of Power/Ground Plate Pairs With Wave Port Excitation, Ping Li, Li (Lijun) Jun Jiang, Hakan Baǧci

Electrical and Computer Engineering Faculty Research & Creative Works

In this work, a discontinuous Galerkin time-domain method is developed to analyze the power/ground plate pairs taking into account arbitrarily shaped antipads. To implement proper source excitations over the antipads, the magnetic surface current expanded by the electric eigen-modes supported by the corresponding antipad is employed as the excitation. For irregularly shaped antipads, the eigen-modes are obtained by numerical approach. Accordingly, the methodology for the S-parameter extraction is derived based on the orthogonal properties of the different modes. Based on the approach, the transformation between different modes can be readily evaluated.

Analytical Evaluation Of Partial Inductances With Retardation, L. Lombardi, G. Antonini, A. E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

The Partial Element Equivalent Circuit (PEEC) circuit oriented electromagnetic method has been found particularly useful for modeling PCBs, interconnects, and 3-D problems involving both electromagnetic computations and circuits. Efficiency improvements in PEEC for higher frequencies are becoming important especially for large aspect ratio cells. The analytical solution of the six-fold integrals has been shown to lead to a very efficient solution for such integrals. In this paper we introduce a new approach for the analytical evaluation of retarded partial inductances at arbitrary distances.