Engineering Commons^™

Minimum Induced Power For A Helicopter In High-Speed Forward Flight, Junsoo (Sean) Hong

McKelvey School of Engineering Graduate Student Theses & Dissertations

A dynamic inflow model is used to calculate minimum induced power for a helicopter in high-speed forward flight with infinite and finite number of blades. Comparisons between analytical and numerical results are shown and they show good agreement. Different flow conditions (such as with and without reverse flow or inflow feedback) are used to show how each condition affects optimum induced power. Several results confirm the findings of earlier investigations such as a singularity in rotor power in reverse flow and induced power reduction with increase in blade number. Some of the new findings are that greater inflow feedback (due …

Mechanobiology Of Epithelial Clusters In Ecms Of Diverse Mechanical Properties, Samila Nasrollahi

McKelvey School of Engineering Graduate Student Theses & Dissertations

Cell clusters reside in complex extracellular matrices (ECMs) of varying mechanical properties. Epithelial cells sense and translate the mechanical cues presented by the surrounding ECM into biochemical signals through a process called ‘mechanotransduction’, which controls fundamental aspects of disease and development. During the course of metastasis, mechanical changes in the tumor microenvironment can lead to declustering of epithelial cells through a process called epithelial-to-mesenchymal transition (EMT). Throughout different steps of metastasis, escaped epithelial clusters encounter heterogeneous tissues of varying mechanical properties that ultimately influence their behavior in distant locations within the body. This dissertation investigates the mechanobiology of epithelial clusters …

Forecasting Us Army Enlistment Contract Production In Complex Geographical Marketing Areas, Joshua L. Mcdonald, Edward D. White, Raymond R. Hill, Christian Pardo

Faculty Publications

Purpose: The purpose of this paper is to demonstrate an improved method for forecasting the US Army recruiting. Design/methodology/approach: Time series methods, regression modeling, principle components and marketing research are included in this paper. Findings: This paper found the unique ability of multiple statistical methods applied to a forecasting context to consider the effects of inputs that are controlled to some degree by a decision maker. Research limitations/implications: This work will successfully inform the US Army recruiting leadership on how this improved methodology will improve their recruitment process.
Practical implications: Improved US Army analytical technique for forecasting recruiting goals.

Adaptive Learning Pedagogy In Udl And Multi-Modal Training, Ziho Kang, Mattlyn R. Dragoo, Randa L. Shehab, Han Yuan, Lei Ding, Stephen G. West

National Training Aircraft Symposium (NTAS)

Currently, most learning methods are based on classroom teaching through unidirectional communication using boards or slides. However, the Universal Design for Learning (UDL) asserts that the students can increase their performance if the instructors can provide the students with diversified information representation, expression, and engagement means. Although UDL minimizes the mismatch between the teaching and learning styles, we lack the detailed methods to implement the UDL and its associated multi-modal training methods in the context of air traffic control candidates and/or technical operators. We propose an approach that adapts the Index of Learning Styles (ILS) based on four categories: perception, …

Combining Forces: Utilizing Expertise From Applied Linguistics And Flight Instruction For Better Atc Communications, Jennifer L. Roberts, Muhammad T. Omar

National Training Aircraft Symposium (NTAS)

ATC communications are a complex mix of FAA phraseology and plain English. The dynamic demands of a pilot’s workload, simultaneously operating the aircraft, managing checklists, and maintaining situational awareness, make this domain of communication particularly challenging for many non-native English speakers. The dramatic growth of aviation in regions of the world in which English is not the native language has increased the need for flight training organizations to address and manage language issues. This paper outlines a new initiative at Embry-Riddle Aeronautical University to support flight students with the English language necessary for successful flight training. Two subject matter experts …

Necessary, But Not Sufficient: What Flight Training Organisations Teach Is No Longer Adequate For A Demanding Market That Needs ‘Captains Out-Of-The-Box', Michael J. Mylan

National Training Aircraft Symposium (NTAS)

Early 2017 one of the fastest growing low-cost Asian airlines posed a problem to the Aerudite™ consultancy.

“We are expanding faster than we can mature our first officers to command. We have no choice but to distil the command knowledge and maturity, traditionally attained through ten years of right-seat osmosis, into three years flat! We don’t plan to recruit MPL first officers. We plan to recruit CIWs - Captains-In-Waiting. And we want you to devise a training course - right now.”

To enjoy (or to suffer) such a rate of expansion, this airline ‘sticks to its knitting’ and outsources …

Pilot Control Design Influences On Pilot Monitoring Effectiveness Of Crew Resource Management In Airbus 320 Landings, Edwin Odisho

National Training Aircraft Symposium (NTAS)

The purpose of this paper is to examine the effects of Airbus flight control design on pilot perception of Crew Resource Management (CRM) in the landing phase of flight. Federal Aviation Administration Advisory Circular 120-71B: Standard Operating Procedures and Pilot Monitoring Duties for Flight Deck Crewmembers, published in January 2017, defines Pilot Monitoring (PM) responsibilities and potential barriers to PM effectiveness of these duties. The unique flight deck design of the A320 includes non-coupled, independently manipulated, side stick controllers, and non-moving autothrust levers. The combination of these design elements on the A320 flight deck presents unique challenges to the flight …

Towards Food Service Sustainability In Suburban Environments By Optimally Locating Shared Anaerobic Digester Units, Rebecca Loraamm, Joni Downs, Robert Alonso Bair, Daniel Yeh

Suburban Sustainability

Anaerobic digestion is an effective method for reducing food waste at the consumer level. Drawbacks associated with this strategy include high construction costs for multiple digester units and limited public awareness of the method’s commercial potential. Given the large scale problem of food waste, an approach establishing community partnerships between local businesses and primary schools is offered to combat the problem of food waste. Optimizing the placement of shared digester units enabling utilization by multiple stakeholders is the suggested mitigation method. This research explores application of the p-median problem to determine the set of optimal sites for shared anaerobic digester …

Amorphous Boron Nanorod As An Anode Material For Lithium-Ion Batteries At Room Temperature, Changjian Deng, Miu Lun Lau, Riley Parrish, Kassiopeia A. Smith, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

We report an amorphous boron nanorod anode material for lithium-ion batteries prepared through smelting non-toxic boron oxide in liquid lithium. Boron in theory can provide capacity as high as 3099 mAh g^-1 by alloying with Li to form B₄Li_5. However, experimental studies of boron anode were rarely reported for room temperature lithium-ion batteries. Among the reported studies the electrochemical activity and cycling performance of bulk crystalline boron anode material are poor at room temperature. In this work, we utilized amorphous nanostructured one-dimensional (1D) boron material aiming at improving the electrochemical reactivity between boron and lithium ions …

The Effect Of Good Form Running Gait Retraining On Lower Extremity Kinematics And Ground Reaction Forces, Alyssa Schaefbauer

Masters Theses

Running is a popular activity for those trying to get in shape, stay fit, and improve overall health. As running has increased in popularity over the past couple of decades, so has the number of running related injuries. (Higginson, 2009; Statistics and Research, 2016). Interest in running gait research has also increased to address and understand the running related injuries. In addition to reducing injuries, the search for an optimal running form that will improve efficiency is being pursued (Davis, 2005). Good Form Running has become an increasingly popular school of running that seeks to fulfill these needs, but its …

General Design Procedures For Airport-Based Solar Photovoltaic Systems, Anurag Anurag, Jiemin Zhang, Jephias Gwamuri, Joshua M. Pearce

Department of Materials Science and Engineering Publications

A source of large surface areas for solar photovoltaic (PV) farms that has been largely overlooked in the 13,000 United States of America (U.S.) airports. This paper hopes to enable PV deployments in most airports by providing an approach to overcome the three primary challenges identified by the Federal Aviation Administration (FAA): (1) reflectivity and glare; (2) radar interference; and (3) physical penetration of airspace. First, these challenges and precautions that must be adhered to for safe PV projects deployment at airports are reviewed and summarized. Since one of the core concerns for PV and airport symbiosis is solar panel …

Pulsed Laser Beam Welding Of Pd43Cu27Ni10P20 Bulk Metallic Glass, Ling Shao, Amit Datye, Jiankang Huang, Jittisa Ketkaew, Sung Woo Sohn, Shaofan Zhao, Sujun Wu, Yuming Zhang, Udo D. Schwarz, Jan Schroers

Electrical and Computer Engineering Faculty Publications

We used pulsed laser beam welding method to join Pd₄₃Cu₂₇Ni₁₀P₂₀ (at.%) bulk metallic glass and characterized the properties of the joint. Fusion zone and heat-affected zone in the weld joint can be maintained completely amorphous as confirmed by X-ray diffraction and differential scanning calorimetry. No visible defects were observed in the weld joint. Nanoindentation and bend tests were carried out to determine the mechanical properties of the weld joint. Fusion zone and heat-affected zone exhibit very similar elastic moduli and hardness when compared to the base material, and the weld joint shows high …

Protecting Non-Public Information In Community Banks: A Study For Implementing Risk Based Framework For Protecting Non Public Personal Information, Bruce Lee Upton

Theses and Dissertations

In today’s world it seems that cyber hackers, cyber terrorists, and cyber activists make headlines almost every day. Information security has become a major concern for bankers from both a reputation and regulatory examination standpoint. Bank management is tasked to answer a litany of questions. Is my bank secure? What impact does this security have on productivity? What solutions are cost effective? What impact will a security breach have on my bank and respective customer base? Additionally, many bankers don’t have on-staff expertise to answer these questions. Having a framework where bankers can know how likely it is they will …

Reduced Order Description Of Experimental Two-Phase Pipe Flows: Characterization Of Flow Structures And Dynamics Via Proper Orthogonal Decomposition, Bianca Fontanin Viggiano

Dissertations and Theses

Multiphase pipe flow is investigated using proper orthogonal decomposition for tomographic X-ray data, where holdup, cross-sectional phase distributions and phase interface characteristics within the pipe are obtained. Six cases of stratified and mixed flow with water content of 10%, 30% and 80% are investigated to gain insight into effects of velocity and proportion of water on the flow fields. Dispersed and slug flows are separately analyzed to consider the added interface complexity of the flow fields. These regimes are also highly applicable to industry operational flows. Instantaneous and fluctuating phase fractions of the four flow regime are analyzed and reduced …

Sequentially Rotated Virtual Antenna Array Using A Single Conducting Patch, Ali Isam Hammoodi

Theses and Dissertations

Circularly polarized microstrip antennas are attractive due to their low profile, conformability, compatibility with MMIC, and low cost. Numerous circularly polarized microstrip antenna designs have been proposed to achieve high gain with an axial ratio typically less than 3 dB for a narrow range of elevation and azimuth angles around the boresight. One well-known and popular design approach is the sequentially rotated antenna array, in which sufficiently separated, arbitrarily polarized antenna elements and their excitation are progressively rotated and phase shifted in the spatial and temporal domains, respectively. Traditionally, the antenna elements must be excited by a separate feeding network …

Preclinical Evaluation Of Spatial Frequency Domain-Enabled Wide-Field Quantitative Imaging For Enhanced Glioma Resection, Mira Sibai, Carl Fisher, Israel Veilleux, Jonathan T. Elliot, Frederic Leblond, David W. Roberts, Brian Wilson

Dartmouth Scholarship

5-Aminolevelunic acid-induced protoporphyrin IX (PpIX) fluorescence-guided resection (FGR) enables maximum safe resection of glioma by providing real-time tumor contrast. However, the subjective visual assessment and the variable intrinsic optical attenuation of tissue limit this technique to reliably delineating only high-grade tumors that display strong fluorescence. We have previously shown, using a fiber-optic probe, that quantitative assessment using noninvasive point spectroscopic measurements of the absolute PpIX concentration in tissue further improves the accuracy of FGR, extending it to surgically curable low-grade glioma. More recently, we have shown that implementing spatial frequency domain imaging with a fluorescent-light transport model enables recovery of …

Removal Of Retained Electrospinning Solvent Prolongs Drug Release From Electrospun Plla Fibers, Anthony R. D'Amato, Nicholas J. Schaub, Jesus M. Cardenas, Andrew S. Fiumara, Paul M. Troiano, Andrea Fischetti, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

A major challenge in developing drug-releasing electro spun nanofibers is obtaining long-term drug release over many weeks with no burst release of drug. Here, we present new methods capable of prolonging the diffusive release of small molecule drugs from electro spun poly-L-lactic acid (PLLA) nanofibers. The methods focus on removal of retained electrospinning solvent through fiber heating, maintaining fibers in a laboratory setting, or a combination of these methods. These post-fabrication methods altered the release characteristics of a model small molecule drug, 6-aminonicotinamide (6AN), from PLLA fibers. Specifically, untreated fibers released 6AN over 9 days, and fibers that underwent a …

Phased Deep Retrofit Project: Real-Time Measurement Of Energy End-Uses And Retrofit Opportunities, Florida Solar Energy Center, Karen Fenaughty

FSEC Energy Research Center®

This paper describes how utilities can 'make reductions real' through real-time measurement of energy end-uses and corresponding retrofit opportunities. A field evaluation of the methodology was conducted from 2012 to 2016 with Florida Power and Light (FPL), an investor owned utility. A collaborative program between the U.S. Department of Energy (DOE) Building America and FPL led to an ambitious residential energy-efficiency retrofit study aimed to represent FPL's customer base. Fifty-six existing, all electric, occupied Florida homes were instrumented to collect one-minute data on most all energy end-uses in advance of energy-efficiency retrofits. Baseline measurements enabled the development of end-use profiles …

A Smoother Ride Over Troubled Waters | College Of Engineering, Usu College Of Engineering

College of Engineering News

Boating through choppy waters can be an exciting but physically exhausting experience.

Satellite Propulsion Spectral Signature Detection And Analysis For Space Situational Awareness Using Small Telescopes, Pamela L. Wheeler

Theses and Dissertations

Safe satellite operations are of utmost importance. Maintaining precise orbital maintenance places stringent performance requirements on current propulsion systems, which are often electric propulsion systems. Electron temperature is a commonly used diagnostic to determine the performance of a Hall thruster, and recent work has correlated near infrared (NIR) spectral measurements of ionization lines of xenon and krypton to electron temperature measurements. In the research herein, appropriate line spectra ratios are identified for each propellant type when used with remote space-to-ground observations. NIR plume emissions were used to characterize a 600 Watt Hall thruster for a variety of observation angles and …

Issues In Urban Trip Generation, Kristina Marie Currans

Dissertations and Theses

In the 1976, the Institute of Transportation Engineers (ITE) compiled their first Handbook of guidelines and methods for evaluating development-level transportation impacts, specifically vehicular impacts (Institute of Transportation Engineers 1976). Decades later, these methods--essentially the same as when they were originally conceived--are used ubiquitously across the US and Canada. Only recently, with the guidelines in its third edition of the ITE's Trip Generation Handbook (Institute of Transportation Engineers 2014) new data and approaches have been adopted--despite substantial evidence that questions the accuracy of older data, automobile bias, and lack of sensitivity to urban contexts.

This dissertation contributes to this literature …

Catalytic Oxidation And Depolymerization Of Lignin In Aqueous Ionic Liquid, Lalitendu Das, Siquan Xu, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Lignin is an integral part of the plant cell wall, which provides rigidity to plants, also contributes to the recalcitrance of the lignocellulosic biomass to biochemical and biological deconstruction. Lignin is a promising renewable feedstock for aromatic chemicals; however, an efficient and economic lignin depolymerization method needs to be developed to enable the conversion. In this study, we investigated the depolymerization of alkaline lignin in aqueous 1-ethyl-3-methylimidazolium acetate [C₂C₁Im][OAc] under oxidizing conditions. Seven different transition metal catalysts were screened in presence of H₂O₂ as oxidizing agent in a batch reactor. CoCl₂ and …

Mechanical Characteristics For Different Composite Materials Based On Commercial Epoxy Resins And Different Fillers, Marwa Mohamed, M. A. Radwan, M. A. Sadek, Hany A. Elazab

Chemical Engineering

The bulletproof jacket and the cassette shields of reactive armors are formed from different layers containing polymeric composite material of low density but with high resistance to penetration of high kinetic energy projectiles. Composites based on epoxies are very rigid and can resist bullet penetration specially when made with other layers of carbon fibers or Kevlar. In this work different composites based on epoxy resins were prepared and all mechanical properties were determined including resistance to high kinetic energy by falling steel ball to reach the optimum composition, which may be used in the production of the bulletproof jackets and …

Nathan Guymon, Junior And Swbec Member Awarded Urco Project For 2017-2018 | Sustainable Waste-To-Bioproducts Engineering Center, Usu College Of Engineering

College of Engineering News

Nathan Guymon, a junior in the Biological Engineering department's Undergradaute program and member of SWBEC has been awarded an URCO grant by the USU Office of Research and Graduate Studies for the reseach he and his faculty mentor Dr. Ron Sims are working on titled the Effects of Photoperiods on the Performance of an Algal Biofilm Reactor for Wastewater Remeditation & Biomass Producst

Camel And Adcirc Storm Surge Models—A Comparative Study, Muhammad K. Akbar, Richard A. Luettich, Jason G. Fleming, Shahrouz K. Aliabadi

Mechanical and Manufacturing Engineering Faculty Research

The Computation and Modeling Engineering Laboratory (CaMEL), an implicit solver-based storm surge model, has been extended for use on high performance computing platforms. An MPI (Message Passing Interface) based parallel version of CaMEL has been developed from the previously existing serial version. CaMEL uses hybrid finite element and finite volume techniques to solve shallow water conservation equations in either a Cartesian or a spherical coordinate system and includes hurricane-induced wind stress and pressure, bottom friction, the Coriolis effect, and tidal forcing. Both semi-implicit and fully-implicit time stepping formulations are available. Once the parallel implementation is properly validated, CaMEL is evaluated …

Fabricating Zirconia Components With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70°C to melt the PCL. The part is then sintered …

Additive Manufacturing Of High Entropy Alloys -- A Review, Wenyuan Cui, Xinchang Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

High-entropy alloys have attracted increasingly interest due to their unique compositions, microstructures and mechanical properties. Additive manufacturing has been recognized as a promising technology to fabricate the high-entropy alloys in the recent years. The purpose of this paper is to review the current research progress in high-entropy alloys by additive manufacturing process. It will first highlight the important theory of the high-entropy alloys. The next aspect is to summarize current additive manufacturing methods applied for the high entropy alloys. At last, the correlation between the microstructures and the mechanical properties of the high-entropy alloys will be examined and discussed.

Raman Spectroscopy Based Validation For Handheld Non-Invasive Glucose Measurement, Dong Jae Joo

Theses and Dissertations

Diabetes mellitus has been steadily increasing for the past three decades and has been one of the major causes of death. Diabetes may develop serious complications as well. Even though diabetes can be controlled without developing severe complications by steady checking of glucose level, the physical pain in pricking fingers and the emotional distress associated with using conventional invasive glucose meter make diabetics neglect self-monitoring of blood glucose. Hence, the improvement of non-invasive glucose measurement technology could give a huge effect on diabetes patient for not only improving health but also an economic benefit. However, no non-invasive glucose monitoring device …

Bonding Of 304l Stainless Steel To Cast Iron By Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, Nikhil Doiphode

Mechanical and Aerospace Engineering Faculty Research & Creative Works

While cast iron is widely used in industry, a major limitation is the weldability of a dissimilar material onto cast iron due to hot cracking as a result of lack of ductility from graphite flakes. Consequently, a significant amount of preheat is often employed to reduce the cooling rate in the fusion zone, which, however, may lead to distortion of the welded parts. A potential remedy could be the Selective Laser Melting (SLM) process, where only small melt pools are created and thus the overall energy input is reduced. The present paper describes an investigation of the SLM process to …

Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Through using Zr intermediate layers, Zr_52.5Ti₅Al₁₀Ni_14.6Cu_17.9 metallic glass (MG) parts are successfully built on Ti-6Al-4V substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils are laser welded layer-by-layer onto the substrate. The printed MG part is free of porosity, cracking and crystallization; additionally, its glass transition temperature, crystallization temperature, micro-hardness, and tensile strength are very similar to the original MG material. The Zr intermediate layers are aimed at preventing direct interaction between the first layer of MG foil and the Ti substrate; otherwise, the welded MG foils would peel …