Engineering Commons^™

Improved Triboelectric Nanogenerator By As-Prepared Lithium Niobate For Energy Harvesting And Sensing Applications, Jahid Inam Chowdhury, Md. Wasikur Rahman, Md Arafat Hossain, Nicholas Dimakis, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Triboelectric nanogenerators (TENGs) have garnered significant research interest due to their ability to harvest mechanical energy efficiently. In this study, we report a TENG composed of polydimethylsiloxane (PDMS) and polyvinyl alcohol (PVA) as triboelectric layers. To enhance charge generation in the PDMS composite polymer, we incorporated lithium niobate (LiNbO3) nanoparticles, leveraging their piezoelectric and ferroelectric properties. The LiNbO3 nanoparticles were synthesized using a solid-state reaction method, resulting in two distinct phases: triclinic LiNbO3 and monoclinic LiNb3O8. Various weight percentages of LiNbO3 and LiNb3O8 nanoparticles were added to the PDMS matrix to optimize power generation. The maximum open-circuit voltage (VOC) and …

Storage Location Optimization In Automated Storage And Retrieval Systems: A Deep Reinforcement Learning Approach, Lingjun Wang, Aldy Gunawan, Pieter Vansteenwegen

Research Collection School Of Computing and Information Systems

This study investigates the optimization of storage location in automated storage and retrieval systems (AS/RS). We introduce an optimization approach based on the Deep Q-Network (DQN) algorithm to enhance warehouse task efficiency and minimize stacker travel during storage and retrieval. To accelerate the algorithm training process, we integrate a prioritized experience replay mechanism. Furthermore, we decouple action selection from value estimation within the DQN framework to address the issue of value overestimation. The proposed model is evaluated against three heuristic methods. The experimental results demonstrate that our approach significantly outperforms these baselines.

Incorporation Of E-Waste Plastics Into Asphalt: A Review Of The Materials, Methods, And Impacts, Sepehr Mohammadi, Dongzhao Jin, Zhongda Liu, Zhanping You

Michigan Tech Publications

This paper presents a comprehensive review of the environmentally friendly management and reutilization of electronic waste (e-waste) plastics in flexible pavement construction. The discussion begins with an overview of e-waste management challenges and outlines key recycling approaches for converting plastic waste into asphalt-compatible materials. This review then discusses the types of e-waste plastics used for asphalt modification, their incorporation methods, and compatibility challenges. Physical and chemical treatment techniques, including the use of free radical initiators, are then explored for improving dispersion and performance. Additionally, in situations where advanced pretreatment methods are not applicable due to cost, safety, or technical constraints, …

Communicating Wastewater-Based Surveillance Data To Drive Action, Kata Farkas, Devrim Kaya, Rasha Maal-Bared, Ahmad I. Al-Mustapha, Sarmila Tandukar, Ishi Keenum, Teemu Gunnar, Aaron Bivins, Matthew J Wade, Kyle Bibby, Tarja M. Pitkänen, Ananda Tiwari

Michigan Tech Publications

As exemplified during the COVID-19 pandemic, wastewater-based surveillance (WBS) can deliver near real-time, population-level pathogen data to guide public health action. Its impact, however, hinges on timely, transparent, and context-specific communication to stakeholders, including health authorities, policymakers, scientists, clinicians, and the public. This review examines current WBS communication practices, identifies persistent challenges, and proposes strategies to enhance relevance. Key challenges include data complexity, lack of standardised communication frameworks, ethical and privacy concerns, and variable stakeholder capabilities. The strategic use of digital platforms, such as dashboards, reports, press releases, and social media, alongside traditional media, can broaden reach and aid interpretation. …

Comprehensive Review Of In Vitro Approaches For Environmental Heavy Metal Exposure, Manas Warke, Madeline English, Camila Padilla, Lexie Gasco, Wendy Leisner, Rupali Datta, Smitha Rao

Michigan Tech Publications

Heavy metals are ubiquitous environmental pollutants, contaminating air, soil, and water via the erosion of natural deposits, as well as originating from anthropogenic sources, such as agriculture, industries, transportation, and landfills. The increasing utilization of heavy metals over the years, combined with the persistent nature of metals in the environment poses a direct threat to human and environment health. Although regulatory limits have been established for toxic metals, assessing the associated health risks using real-life exposure scenarios remains challenging. In this review, we summarize the development and use of in vitro models based two- and three-dimensional cell culture systems, focusing …

How Does The Sewer Microbiome Impact Wastewater Surveillance For Antibiotic Resistance?, Israel Adedayo Adeoye, Ishi Keenum

Michigan Tech Publications

Antibiotic resistance is a global health threat that is difficult to directly monitor prior to clinical presentation. Wastewater surveillance has emerged as a public health tool that could aid in identifying the community wide circulation of antibiotic resistance genes (ARGs) and antibiotic resistant bacteria (ARB), however this is complicated by the potential growth and decay of ARB within the sewer network. Sewer systems have been suggested as a primary place where sub-lethal doses of antibiotics are present with human and environmental adapted bacterial strains, however little is understood about what physiochemical properties might enhance or inhibit ARG propagation. Hence, key …

Diffusion Mri Biomarkers For Predicting Treatment Outcomes In Infantile Epileptic Spasms Syndrome With Non-Lesional Mri, Daniel Ackom, Scott A. Beardsley, Jennifer Meylor, Kayleigh Butler, Ricardo Vega, Andrew J.D. Crow, Hema Patel, Brian D. Schmit, Pradeep Javarayee

Biomedical Engineering Faculty Research and Publications

Background

Infantile epileptic spasms syndrome (IESS) is a devastating developmental epileptic encephalopathy (DEE) and patients exhibit diffuse white matter alterations and structural remodeling. However, the correlation between these structural changes and brain network properties, or their effect on the efficacy of treatment outcomes in MRI non-lesional IESS patients is not clear.

Method

This retrospective study was conducted on IESS patients using fixel-based analysis (FBA) of diffusion MRI and graph theory analysis of structural connectivity, involving 26 non-lesional IESS patients aged 2 to 12 months and 120 age-matched controls. We further examined the differences between antiseizure medication (ASM) responders and non-responders …

Lung Injury Risk Curves From Behind Armor Blunt Trauma Using A Live Swine Model, Narayan Yoganandan, Lewis Somberg, Danielle Wilson, Alok Shah, Jared Michael Koser, Brian D. Stemper, Valeta Carol Chancey, Joseph Mcentire

Biomedical Engineering Faculty Research and Publications

Introduction

From structural, anatomical, and functional perspectives, components of the thoracoabdominal region are heterogeneous and physiologically and functionally different. Although their tolerances to injury are expected to be different, the current Roma Plastilina No. 1 clay penetration criterion for behind armor blunt trauma (BABT) is not specific to the body region. It is important to develop regional injury criteria to ensure its specificity. The objective of the study is to conduct impact tests on the lung region using a live animal model and develop injury risk curves using velocity and deflection metrics via parametric survival analysis.

Materials and Methods

Live …

Measuring Neck Morphologies Using Upright Magnetic Resonance Imaging, Narayan Yoganandan, Mahmudur Rahman, Ali Warriach, Karthik Banurekha Devaraj, Brian D. Stemper, Aditya Vedantam, Christopher Wolfla, Peter Le

Biomedical Engineering Faculty Research and Publications

Introduction

Because the head supported mass worn by military pilots adds loading to the head-neck complex, morphometrical characteristics of neck muscles are expected to be different from those that do not wear the added mass. To accurately determine segmental neck loads using computational whole-body human or head-neck models, it is important to include accurate morphometrical properties of cervical muscles from the population of interest, in this case military pilots. Routine radiographic imaging (x-rays and computed tomography scans) is less optimal, while magnetic resonance imaging (MRI) is appropriate. Although MRI scanners are generally available in clinical settings, recumbent scanning does not …

Renewable-Based Isolated Power Systems: A Review Of Scalability, Reliability, And Uncertainty Modeling, Mehrdad Ghahramani, Daryoush Habibi, Seyyedmorteza Ghamari, Hamid Soleimani, Asma Aziz

Research outputs 2022 to 2026

Electric power systems are increasingly becoming more decentralized. Many communities depend on isolated power systems that operate independently of the main grid. Remote, islanded, and isolated systems face challenges due to the intermittency and unpredictability of renewable energy sources. This paper reviews the current status of renewable integration and control in stand-alone power systems. It examines techniques to enhance system reliability through energy storage, hybrid systems, and advanced predictive models. Additionally, the issues related to connecting stand-alone systems, focusing on reliability and renewable penetration, are discussed. The scalability of stand-alone power systems is analyzed based on classifications of small-, medium-, …

Electrical Characterization Of Germanium Tin Alloys And Devices For Space Reliability, Kevin K. Choe

Theses and Dissertations

GeSn (germanium tin) alloys are potentially well suited for near-mid infrared space optoelectronic applications. Alloys of GeSn have similar properties to group III-V and mercury-cadmium-telluride semiconductors and are compatible with cost-effective complementary metal oxide semiconductor (CMOS) manufacturing technology. Recent progress in non-equilibrium remote plasma-enhanced chemical vapor deposition (RPECVD) has enabled the crystalline growth of GeSn with Sn concentrations of up to 10% without Sn surface segregation. Several experimental studies in previous literature report CVD- or molecular beam epitaxy (MBE)-grown GeSn alloys achieving a direct bandgap with 6%-9% Sn content. This novel growth technique opens opportunities for a cost-effective, next-generation optical …

Validation And Proposed Expansion Of The Data-Driven D Region Model, Kevin M. Watson

Theses and Dissertations

Predicting ionosphere effects on radio wave propagation is critical for communications and over-the-horizon radar systems. The D region is challenging to model for several reasons, one of which is chemical complexity. Ion density changes during sunrise/sunset introduce substantial uncertainty in electron density profiles (EDPs). The Data Driven D Region (D3R) model solves electron densities through an ion chemistry model and assimilates relevant space weather inputs. This study evaluates D3R against the Faraday International Reference Ionosphere (FIRI) and measurements using Very Low Frequency (VLF) propagation paths. Space weather event impacts on D3R EDPs are evaluated during the disturbed period from 8-12 …

Automation Of Lcmc Logistics Processes: A Delphi Approach, Kline M. Alt

Theses and Dissertations

As the U.S. Air Force confronts growing complexity in system acquisition, the implementation of digital models in system design and logistics process management allows the incorporation of digital tools and the possibility for automation of portions of logistics processes. This thesis investigates where these technologies can be most effectively integrated within the Air Force Life Cycle Management Center logistics enterprise (AFLCMC). Using a three round Delphi study, AFLCMC logistics subject matter expert (SME) opinions were solicited from program-level senior logisticians, program managers to identify high-need areas, key success factors, and potential barriers to adoption. Quantitative consensus from Likert-scale and ordinal …

Investigating The Impact Of Forest Vegetation On Nuclear Weapon Prompt Radiation Energy Deposition, Paul A. Clement

Theses and Dissertations

This work seeks to answer the unstudied questions “Does a layer of vegetation impact the prompt radiation energy deposition in the soil from an atmospheric nuclear detonation?” and “If yes, by how much?” A new methodology was developed to repeatably automate and streamline a process of generating a three-dimensional geometry for subsequent radiation transport simulations and statistical analysis. The methodology streamlined three diverse applications: a three-dimensional mesh generator, a radiation transport simulation code, and a sensitivity analysis & uncertainty quantification software. The methodology was tested by simulating the quantitative influence that vegetation has on changing the energy deposition into the …

Tensile Creep Of A Hybrid Polymer-Matrix/Ceramic-Matrix Composite At Elevated Temperature, Waleed S. Alshehri

Theses and Dissertations

Advanced aerospace systems require structural materials that can perform reliably in high-temperature environments for long durations. The performance of standard polymer matrix composites (PMCs) in these conditions is often limited by their susceptibility to time-dependent deformation, such as creep. The objective of this research is to characterize the high-temperature creep behavior of a novel unitized material system comprising a polymer matrix composite (PMC) and a ceramic matrix composite (CMC) co-cured together. The PMC part consists of the polyimide matrix reinforced with laminated carbon fibers woven in an eight harness satin weave (8HSW). The CMC part consists of a zirconia-based ceramic …

Impacts Of Climate Disruption On Mobility Aircraft Performance In The Pacaf Region, Hannah M. Dauterman

Theses and Dissertations

This thesis investigates the projected impacts of climate disruption on the performance and fuel management of the C-17 Globemaster III, a critical mobility aircraft in the Pacific Air Forces (PACAF) region. As rising global temperatures reduce air density, the performance of aircraft is compromised, resulting in increased fuel consumption, as well as the potential for extended runway requirements and diminished cargo capacity. Using climate projection data from Coupled Model Intercomparison Project Phase 6 (CMIP6), this research analyzes future air temperature trends and their implications for C-17 fuel consumption. Results suggest that by 2049, the U.S. Air Force may incur an …

Multi-Fidelity Machine Learning Modeling For Aerodynamic Response Prediction Of Aerospace Vehicles, Ethan S. Jackman

Theses and Dissertations

Hypersonic vehicle design requires understanding complex aerodynamic phenomena across the full flight regime. This study presents a novel MF surrogate modeling methodology that enables the prediction the full field response across a vehicle’s surface. A Space-Filling Curve (SFC) is used to convert unstructured data into 1D vectors. The a Convolutional Autoencoder is used with transfer learning to reduce the dimensionality of the data. An Emulator-Embedded Neural Network (E2NN) combines multi-fidelity data for fast, accurate predictions. A benchmark analytical example and hypersonic application are used to evaluate the methodology. Using various numbers of samples and sampling strategies it is found that …

Low-Cost Transfers For Cislunar Liaison Navigation, Ka'eo J. Swartzmiller

Theses and Dissertations

CubeSats have an inherent limitation on volume due to their small form factor. Naturally, this extends to the capacity of on-board ΔV, thus limiting the maneuverability of the satellites. This limited maneuverability makes it extremely important to be intentional when planning out mission trajectories. The cislunar region subjects these trajectories to the gravitational forces of both the Earth and the Moon, making it all the more necessary to deliberately plan out maneuvers. The Circular Restricted Three Body Problem (CR3BP) provides a simpler model for estimating the motion of spacecraft within the cislunar region, allowing for the gravitational forces to be …

Designing An Experiment To Create And Evaluate Behavioral Changes In Air Force Pilots' Fuel Efficiency, Jackson Macias

Theses and Dissertations

Fuel represents over 70% of the logistical resupply demand within the Department of Defense, with the United States Air Force accounting for most of that consumption. While prior fuel efficiency efforts have primarily focused on technical upgrades, this research explores how behavioral interventions can influence pilot decision-making and operational energy outcomes. Using the Theory of Planned Behavior (TPB) as a guiding framework, this study investigates the effects of targeted behavioral strategies on pilots’ attitudes, subjective norms, perceived behavioral control, intentions, and actual fuel-efficient behaviors. A quasi-experimental design was applied through a controlled pilot study using simulator flights. Six participants were …

Designing The Protocol For An Experimental Flight Simulation Study Encouraging Fuel Efficient Behavior, Thomas S. Reardon

Theses and Dissertations

This study designed and tested an experimental instrument to examine how pilots respond to fuel efficiency feedback in a flight simulator. A standardized flight plan, script, and hardware setup were created using X-Plane 12 software and physical flight simulator hardware. The chosen sortie guided participants from Monterey Regional Airport to Moffett Federal Airfield using instrument flight rules (IFR). The flight script provided step-by-step guidance to ensure consistent behavior across participants. The simulator was mapped to match real cockpit controls and allowed for precise data collection including flight time, altitude, heading, and fuel use. The goal was to support a larger …

Implementing Lean Principles To Enhance Warehouse Operations At King Abdulaziz Air Base(Kaab): A Case Study Of Royal Saudi Air Force (Rsaf), Saleh A. Alghamdi

Theses and Dissertations

The Royal Saudi Air Force (RSAF) relies on efficient logistics to sustain readiness. At King Abdulaziz Air Base, warehouse receiving inefficiencies caused delays and waste. This study used Lean principles and a six-month time–motion analysis, with Pareto and Fishbone tools, to identify 55% waste in dead pile and 75% in palletized shipments. Standard times of 5.98 and 6.55 minutes were set. Key recommendations include SOPs, cross-training, forklift certification, layout redesign, and RFID. Lean adoption could save 100+ labor hours and $4,000 annually, improving safety, accuracy, and mission readiness.

A Review Of The United States' Long Term War Support Capabilities In The Indo-Pacific Command Region, Brian J. Mullin Jr.

Theses and Dissertations

This study examines U.S. maritime transportation readiness in the Indo-Pacific, highlighting fleet age, mariner shortages, shipyard decline, and port vulnerabilities. It also considers contested logistics and technological threats. Recommendations include fleet recapitalization, mariner pipeline growth, port diversification, and defensive upgrades. The study concludes that secure sea line assumptions are outdated and calls for greater resilience, with follow-on efficiency analysis proposed for ports and ships.

Temperature-Dependent Properties Of Cu-Doped Znte Thin Films Deposited On Slg Substrates Via Rf Magnetron Sputtering And E-Beam Techniques, Sherif Salah, Camellia Doroody, Fazliyana ‘Izzati Za'abar, Zheng Jie Feng, Prajindra Sankar Krishnan, Ahmad Wafi Mahmood Zuhdi, Muhammad Najib Harif, Nur Irwany Ahmad, Yap Boon Kar, Mohammad Nur-E-Alam

Research outputs 2022 to 2026

Copper doping in zinc telluride (ZnTe) thin films has been extensively studied for optoelectronic applications; however, challenges remain in optimizing temperature-dependent diffusion while minimizing defect-related emissions. Although numerous studies have explored Cu-doped ZnTe, comprehensive investigations using electron-beam (E-beam) evaporation remain limited, especially concerning its influence on diffusion dynamics, defect formation, and electrical properties. This study systematically examined Cu-doped ZnTe films fabricated via E-beam evaporation with a fixed 50 nm Cu layer deposited at three substrate temperatures (RT, 150 °C, and 300 °C), followed by rapid thermal annealing (RTA) at 100 °C and 200 °C for 1 h under a nitrogen …

A Biocompatible Nitinol Based Triboelectric Stent Sensor For Prospective Cardiovascular Health Monitoring, Ulises Vidaurri Romero, Sk Shamim Hasan Abir, Najlah Karam, Mariana Torres, Shahria Ahmed, Md. Wasikur Rahman, Bahareh Azimi, Serena Danti, Jianzhi Li, M. Jasim Uddin

Mechanical Engineering Faculty Publications

Triboelectric nanogenerators (TENGs) have been considered as an effective approach for self-powered systems. Currently, coronary heart disease remains the leading cause of death in the United States. This can be easily resolved by balloon angioplasty or a specialized mesh tube called a stent. This study demonstrates a stent sensor made of nitinol, a nickel—titanium alloy used in the medical field for its pseudo-elasticity and strong corrosion resistance, poly(vinylidene fluoride) (PVDF) and polydimethylsiloxane (PDMS), which can measure several physiological parameters while placing it in the arteries. This nitinol health monitor sensor (NHMS) device thus integrates the TENG with a specific medical …

Reduced Order Models Of Hydrodynamically Interacting Flapping Wings, Jose Pabon

Dissertations

Fish schools exhibit a collective behavior and self-organization that is mediated by hydrodynamic interactions between individual fish. However, the long-time evolution of hydrodynamically interacting collectives is challenging to investigate due to the persistent influence of long-lived vortical structures, and the high-resolution requirements of direct numerical simulation at large Reynolds numbers. Reduced-order models have therefore played an important role in theoretical investigations of collectives of swimming bodies. The main results detailed herein are several new reduced-order models of swimmers that self-propel by flapping, i.e., by executing a prescribed periodic rigid body motion. The models are extensions of a discrete-time dynamical system …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Low-Cost Cutaneous Protoporphyrin Ix (Ppix) Detection (Cpd) Device For Follow-Up Monitoring Of Patients After Photodynamic Therapy, Md Asaduzzaman Rasel

Graduate Masters Theses

Background: Photodynamic Therapy (PDT) utilizes specific wavelengths of light to activate photosensitizing chemical compounds, known as photosensitizers, which induce the generation of cytotoxic reactive oxygen species (ROS) for the targeted destruction of cancer cells. Among various photosensitizers for PDT, Protoporphyrin IX (PpIX) is widely employed in oncology and dermatology due to its natural in situ generation via the metabolic conversion of 5- aminolevulinic acid (ALA), a non-phototoxic prodrug. Systemic administration of ALA after 3-6 hr drug delay leads to peak PpIX accumulation in tissues, facilitating therapeutic and diagnostic applications. However, PpIX can persist in the skin for 24–48 hours post-treatment, …

Design And Development Of A Standalone Digital Holographic Microscope Employing Phase-Driven Reconstruction And Classification For Biomedical Imaging And Optical Diagnostics, Charlotte Kyeremah

Graduate Doctoral Dissertations

Access to advanced biomedical imaging technologies remains a significant challenge in resource-limited settings, especially for early disease detection and monitoring of diseases such as malaria, HIV, and other blood-borne diseases. Although point-of-care (POC) devices have gained popularity in global health, many rely on antibody-based tests, lateral flow strips, or optical readouts that often lack quantitative capabilities, sensitivity to early infections, or versatility in different diagnostic targets. In addition, these systems are typically dependent on disposable reagents or manual interpretation, which limits their effectiveness in remote areas. Digital Holographic Microscopy (DHM) presents a promising alternative as a label-free imaging method capable …

Multimodal Learning In Real-World Application: Enhancing Feature Representation And Training Strategies, Nana Lin

Graduate Doctoral Dissertations

Multimodal learning has emerged as a critical paradigm for developing intelligent systems that can understand and reason across diverse inputs such as images, text, and audio data. Despite significant advances, effective deployment of multimodal models in practice remains a challenging task. This dissertation explores how multimodal learning can be effectively applied to high-stakes, real-world scenarios, with a focus on enhancing feature representation and training efficiency. Specifically, this research investigates multimodal learning strategies in two key domains: healthcare and surveillance.

In the healthcare domain, we explored the data fusion and alignment approaches for cognitive decline diagnoses. First, we propose the LOVEMA …

Lifting-Line Predictions For Optimal Dihedral Distributions In Ground Effect, Amanda K. Olsen, Zachary S. Montgomery, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

When a flying wing comes within close proximity to the ground, a phenomenon called ground effect occurs where the lift is increased and the induced drag is decreased. This research seeks to determine the optimal dihedral distribution predicted by lifting-line theory that minimizes induced drag in ground effect. Despite some limitations, using lifting-line theory for this study allows for quick results across a large range of design variables, which would be infeasible for high-fidelity methods. The SLSQP optimization method is used along with a numerical lifting-line code to find the dihedral distribution that minimizes induced drag. Results are presented showing …