Engineering Commons^™

Pollution And Biodiversity Loss: A Comprehensive Review Of Impacts And Mechanisms, Great Iruoghene Edo, Agatha Ngukuran Jikah, Patrick Othuke Akpoghelie, Joseph Oghenewogaga Owheruo, Endurance Fegor Isoje, Ufuoma Augustina Igbuku, Arthur Efeoghene Athan Essaghah

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Biodiversity plays a vital role in maintaining ecological balance and providing essential ecosystem services. However, human activities, including pollution and overexploitation, have led to significant biodiversity loss. Pollution has particularly emerged as a major threat to biodiversity, impacting various species and ecosystems worldwide. This article synthesizes evidence on pollution-driven biodiversity loss, emphasizing industrial, agricultural, and urban sources. We discuss cascading ecosystem impacts and propose mitigation strategies to inform policy making. Overall, the article highlights the importance of addressing the impact of pollution on biodiversity to ensure the preservation of our planet's ecology and the sustainability of our natural resources.

Biosynthesis Of Metallic Nanoparticles Using Plant Extracts: Mechanisms, Advances, And Sustainable Applications, Alice Njolke Mafe, Great Iruoghene Edo, Patrick Othuke Akpoghelie, Endurance Fegor Isoje, Ufuoma Augustina Igbuku, Joseph Oghenewogaga Owheruo, Arthur Efeoghene Athan Essaghah

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Growing concerns over the environmental and health impacts of conventional nanoparticle synthesis have driven a shift toward green, plant-based methods. This review highlights the biosynthesis of nanoparticles using plant extracts as a sustainable, economical and non-toxic alternative. Plant-derived phytochemicals such as flavonoids, phenolics, and alkaloids serve dual roles as natural reducing and stabilizing agents, enabling the production of nanoparticles typically ranging between 10 and 100 nm. Several studies have demonstrated up to 80% yield improvement when using optimized extracts from plants like Azadirachta indica and Ocimum sanctum. The review outlines recent progress, including the use of novel botanical sources, …

Especial Linkage To Poly(Vinyl Chloride) Structure To Enhance Its Characteristics, Amamer M. Redwan

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Due to a variety of factors that motivated multiple creativities, modification of poly(vinyl chloride) chemical structure has become a flourishing area of research. The current study acts as a condensed overview of the improvements produced using various methods for adjusting the characteristics of poly(vinyl chloride) that is widely utilized. This study explains and emphasizes, through a brief discussion, the findings of the efforts made in recent decades, even if it does not address all of the issues at hand. The article covers a special linkage to the polymer chemical structure such as using heterocyclic moieties to modify poly(vinyl chloride), C–N …

Utilization Of Ftir-Atr For Material Characterization And Forensic Analysis, Helmut Leodarta, Ahmed S. El-Ashwah, Punyaslok Rath, Magdy Abdelrahman, William G. Buttlar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The growing use of chemical modifiers and additives in asphalt mixtures necessitates a reliable system for their identification and quantification, crucial for quality control, assurance, and forensic investigations. Fourier Transform Infrared (FTIR) spectroscopy offers a cost-effective method by analyzing the interaction of infrared light with chemical groups, producing distinct spectral fingerprints. This study evaluates 44 materials, including binders, warm mix additives (WMAs), rejuvenators, release agents, and concrete admixtures. It also assesses the ability of FTIR testing to identify and quantify chemical changes and aging in asphalt binders with rejuvenator addition. An Attenuated Total Reflectance (ATR) accessory was employed for practical …

Mechanical And Deformation Behavior Of Silt Reinforced With Wicking Geotextile: An Experimental Study, Yipeng Guo, Yiyong Xue, Yongjie Zhang, Wei Ruan, Yafeng Li, Xiong Zhang, Zhili Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely utilized as a filling material in transportation construction, However, it frequently suffers from problems, such as excess pore water pressure buildup, settlement, and mud pumping. Wicking geotextiles have emerged as a sustainable solution by improving both drainage and reinforcement capacities, yet their optimal design parameters remain unclear. To address this gap, a series of tests were performed to investigate the effects of compaction degree, reinforcement configuration (number, spacing, position), and specimen geometry on the mechanical and consolidation of silt reinforced with wicking geotextiles. The results reveal that the failure mechanism of reinforced silt progresses through four distinct …

Technological Schemes For Recycling Used Mineral Oils Carbon-Based Adsorbents Derived From Petroleum Coke, Jaloliddin Sharafiddinovich Bakhtiyorov, Vais Narzullaevich Juraev, Mirzhalol Nuriddinovich Norpulatov

Technical science and innovation

Currently, the demand for mineral oils used in engine vehicles and transformers is increasing year by year worldwide. Additionally, a significant portion of used oils is burned as fuel. At present, the contact method is widely used for oil regeneration with the help of adsorbents such as aluminosilicates, zeolites, silica gels, bleaching clays, and others. The existing industrial reprocessing technologies are of great importance in the recycling of used engine and transformer oils. Furthermore, scientists worldwide are conducting research to create long-lasting carbon-based adsorbents for the regeneration of used engine and transformer mineral oils. In this regard, special attention is …

Studying Effect Of Temperature On Photovoltaic Characteristics Of Photovoltaic Modules Based On Cigs Solar Cells, Farrux Anvar O‘G‘Li Akbarov, Anvar Akbarovich Alimov

Technical science and innovation

The article presents the experimental results of the temperature dependence of the load current-voltage characteristics of a solar photovoltaic (PV) module based on a polycrystalline semiconductor binary compound Cu(In,Ga)Se₂ under normal sunlight P_rad=800±5 W/m², in a temperature range of (32÷60) ^оС. It was found that the temperature dependence of the photocurrent has two slopes, which is explained by a change in the generation-recombination mechanism. An increase in the short-circuit current with an increase in the temperature of the photovoltaic module is explained by an increase in the drift length of minority charge carriers, due …

An Approach To The Mesostructure Sealing In Coal By Mine Water Clathrate, Haiyang Yi, Ze Li, Tao Yang, Zhuang Zhuo, Tingxiang Chu, Xianfeng Shi, Guang Xu

Mining Engineering Faculty Research & Creative Works

The sealing performance of coal mass is of significant importance for converting abandoned mines into geological repository. This study presents a novel approach to enhancing the sealing of the pore structure in coal seams, such a technique utilizes mined water as the primary substance and additive solution based crystalline. Sequent tests are implemented, including saturation test, ion chromatography test, permeability test and scanning electronic microscope observations. It was suggested that the produced crystalline decrease the porosity and permeability of the coal, with different crystal morphologies due to various ions of additive solutions. The produced rod-shaped crystals have the most remarkable …

Development And Characterization Of Pmma/Pvp Nanofiber-Loaded Bioactive Agents With Enhanced Breast Cancer Activity, Samar A. Salim, The British University In Egypt, Esraa Abdelazim, Marwa Abdel Aleem

Nanotechnology Research Centre

Breast cancer remains a leading cause of cancer-related mortality globally, driving the need for novel effective and less toxic therapeutic agents. This study explores the synthesis and characterization of bioactive compounds: 1-(4-methoxyphenyl)-N- (p-tolyl)methanimine (MPTI), N-(4-methylphenyl)benzamide (MPB), and 4-methyl-N-(p-tolyl)benzenesulfonamide (MTS), and their incorporation into a PMMA/PVP polymer matrix for potential anticancer applications. Morphological analysis of the PMMA/PVP-loaded agents via SEM depicts structural modifications in the PMMA/PVP nanofibrous matrix upon incorporation of the bioactive agents. The FTIR analysis of the synthesized compounds before and after loading into the 7PMMA:3PVP nanofibers reveals successful incorporation of MPTI, MPB, and MTS, with characteristic absorption bands …

Chromatography In Analysis And Quality Control Of Oil And Gas Products: Modern Approaches And Prospects, Muborak Akramovna Mirshomilova, Natalia Evgenievna Sheina, Lala Bekirova

Technical science and innovation

Chromatography plays a key role in the analysis and quality control of oil and gas products. Modern chromatographic methods, including gas and liquid chromatography, provide high accuracy, sensitivity and speed of analysis. They allow you to identify impurities, control the composition and compliance of products with standards. The article considers innovative approaches, such as multidimensional chromatography and the use of automated systems. Development prospects are discussed, including integration with AI and digital technologies, which opens up new opportunities to improve the efficiency of quality control in the oil and gas industry. This article considers the role of chromatographic methods in …

Training Stages And Algorithms Of Multilayer Neural Networks For The Control System, Abdishukurov Maqsudovich Shavkat, Xuecheng Li

Technical science and innovation

The application of neural network technologies in control systems consists of several stages. In technological object control systems, each layer of the multilayer perceptron neural networks is represented using separate transfer functions. The result of synthesizing neural network technology into control systems allows for the rapid solution of many problems. Using neural network technology, it is possible to perform many calculations. Chain rules of neural networks are added this paper. Lots of training algorithms are compared to choose better to train network. Backpropagation neural networks is seen deeply in the last page. Problems of interpolation and extrapolation are solved. Algorithms …

Research Of Hereditarily Deformable Structures Under Seismic Impacts, Abdali Abdukarimov, Kazbek Nuratdinov

Technical science and innovation

This article examines the responses of a structure to both single-component and multi-component seismic impacts if they are generally described by three linear displacements and three rotations of the foundation relative to three orthogonal axes.

A mathematical apparatus has been created that allows developing statistical theories of seismic resistance for studying hereditarily deformable structures under random seismic impacts. Using impulse transition functions, having established the explicit form of the reaction of hereditarily deformable structures to an arbitrary form of random disturbance, it is possible to determine: the mathematical expectation and moments of the outgoing process; correlation functions; spectral densities, i.e. …

Synthesis And Characterization Of Temperature- And Ph-Responsive Pia-B-Pnipam@Fe3O4 Nanocomposites, Swati Kumari, Cayla Cook, Fatema Tarannum, Erick Salvador Vasquez-Guardado, Olufemi Ogunjimi, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe₃O₄ nanoparticles (APTES@Fe₃O₄) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe₃O …

Reduction-Driven Mobilization Of Structural Fe In Clay Minerals With High Fe Content, Anke Neumann, Luiza Notini, W. A.P.Jeewantha Premaratne, Drew E. Latta, Michelle M. Scherer

Michigan Tech Publications

Clay minerals contain significant amounts of Fe in their alumosilicate framework, and this structural Fe can be reduced and re-oxidized, constituting a potentially renewable source of reduction equivalents in sedimentary environments. However, dissolution and/or clay mineral transformations during microbial Fe reduction contradict this concept. Here, we investigate how Fe reduction and re-oxidation affect the propensity of Fe to be released from the clay mineral structure and use selective sequential extractions in combination with Mössbauer spectroscopy. Negligible amounts of Fe were released in the sequential extraction of high Fe content clay minerals NAu-1 and NAu-2. Once aqueous Fe(II) was added as …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Development Of An Experimental Stand For The Study Of The Directions Of Movement And Velocity Of Air Flows In The Pneumatic Channel Of The Final Aspiration Of The Muz-16 Air Sieve Separator, Alexey Igorevich Ermakov, Alexey Alexandrovich Yazenkov, Sergey Anatolyevich Zelenko, Zulfiya Kakhramonovna Ergasheva

Technical science and innovation

The article describes the principle of operation of the MUZ-16 air-sieve separator produced by CJSC Borisov Plant Metalist, intended for preliminary, primary and secondary purification of grain and seeds of cereals, legumes, cereal crops and rapeseed. The results of a study of the directions of air flow in the MUZ-16 aspiration system and the efficiency of purifying buckwheat from impurities that differ in aerodynamic properties are presented. It has been established that the part of the MUZ-16 aspiration system, responsible for preliminary aspiration, works effectively, while the part of the system responsible for the final aspiration of the grain mixture …

Research On Geological Complications Occurring During Drilling Operations At Uzbekneftegaz Jsc Wells, Otabek Rajabovich Eshmurodov, Komilxodja Anvarxodjayevich Raximov, Shaxnoza Hikmatullayevna Mirsaatova, Tolib Olimovich Komilov, Sherali Halloqovich Umedov

Technical science and innovation

This article presents an analysis of maintaining wellbore stability, preventing pack-off formation, stuck pipe incidents, and drilling fluid losses. A technology aimed at ensuring successful and high-quality trouble-free well drilling is analyzed and recommended. Based on data obtained from the Surkhandarya Basin fields, many wells were not drilled to the designed depth. Geophysical data from studied fields indicate that pore pressure retained in clay formations causes wellbore instability. These data also help to identify zones prone to collapse; however, the direct measurement of pore pressure in such formations remains impossible. This research was primarily conducted in the Ustyurt region, one …

Technical And Economic Justification Of The New Design Of A Hydro-Accumulation Syste, Kurbon Salikhdjanovich Dzhuraev, Abdurasul Sayfutdinov, Elyor Doniyorovich Ismoilov

Technical science and innovation

The effective utilization of renewable energy sources such as solar and wind requires reliable and efficient energy storage systems due to their irregular and intermittent supply. This paper presents a novel hydro-accumulation system that significantly reduces energy consumption by integrating hydraulic ram pumps instead of traditional electrically powered pumps. The proposed system operates in cascade mode, where the kinetic energy of water is used multiple times through a sequence of hydraulic rams to pump water from a lower reservoir back to the upper one. Each stage of the system reuses the outflow water of the previous ram, achieving up to …

Comparative Analysis Of Gas And Mechanical Emissions From Electric Cars And Internal Combustion Engine Vehicles, Bakhtiyor Akhmatjonovich Kosimov

Technical science and innovation

This article analyzes the environmental impact of modern cars, in particular the amount of harmful substances emitted into the environment by electric cars and internal combustion engine cars, and provides scientific information on the substances that are released from cars in the form of not only gaseous emissions, but also dust particles generated by the mechanical wear of the brake system and tires. At the same time, this article also takes a scientific approach to the wear rates of brake pads and tires, their impact on environmental safety, and the level of dispersion of the microdust generated. Comparative tables have …

Improving The Methodology Of Complex Organization Of Rural Areas Based On Gis Technologies, Anvarjon Pardaboyev

Technical science and innovation

In the world, scientific research is being conducted aimed at improving the efficiency of complex organization of rural areas by utilizing modern geographic information systems (GIS) and remote sensing data. These studies focus on shaping the land allocated to these areas, organizing their activities, and forming the basis of cartographic information. Additionally, the use of modern GIS and remote sensing data has become widespread in the complex organization of rural areas in many countries. This method stands out for its effectiveness in organizing regions today.

In our republic, comprehensive measures are being implemented to consistently develop production through structural, institutional, …

Intelligent Control Of Reducing Energy Consumption And Water Loss In Smart Home Systems, Hakimjon Nasriddinovich Zaynidinov, Damira Farxodovna Hodjaeva, Dhananjay Singh

Technical science and innovation

The article presents an innovative approach to developing an intelligent control system for managing temperature and water level in smart home systems. The proposed method integrates an adaptive PID controller with fuzzy logic algorithms, enabling dynamic adjustment of the PID controller coefficients in real time. The mathematical model of the system incorporates heat balance equations, differential heat transfer relations, and nonlinear models of fluid loss. The adaptive control algorithms developed within the study allow the system to effectively respond to changes in input data.

A comprehensive analysis of the membership functions is conducted, along with adaptive tuning of the PID …

Research Into Technological Features In The Curring Process Of Multilayer Polymer Composite Parts, Umidbek Dilshod Ugli Kosimov, Jonibek Kobilovich Tokhirov, Andrey Dmitrievich Novikov

Technical science and innovation

This paper examines the main technologies and mechanisms used in the curing process of multilayer thick-walled parts of unmanned aerial vehicles (UAVs) made of polymer composite materials (PCM) based on epoxy resin. The study provides a detailed analysis of the technological features of the curing process, its kinetics, and the influence of heat transfer mechanisms on the final quality of molded components. It is emphasized that due to the low thermal conductivity of PCM, temperature inhomogeneity may occur during curing, leading to defects, internal stresses, and deterioration of the mechanical properties of the product. Therefore, ensuring uniform temperature distribution throughout …

Harnessing Environmentally Healthy Approaches For Plastic Degradation: A Review And Future Perspectives, Marc Chojnacki

Beyond: Undergraduate Research Journal

In the face of escalating plastic pollution, innovative degradation strategies, such as enzymatic degradation, smokeless incineration technology, and biodegradable plastics, are gaining traction. This paper collates comprehensive research on these methods, assessing their environmental impact and operational feasibility. A special focus is placed on the role of technology and its capacity to spark advancements in these degradation strategies as well as to draw on specific research to understand the economic implications of these methods. At the core of this study is the exploration of potential new, inventive degradation methodologies. Through examining methods of green plastic degradation, the study aims to …

Unveiling Degradation Patterns In Dye-Sensitized Solar Cells: A Machine Learning Perspective, Ahmed Alali, Mahmoud Ashraf, Ahmad Muhammad, Sameh O. Abdellatif

Electrical Engineering

This study examines the time-dependent degradation of dye-sensitized solar cells (DSSCs) by systematically investigating several critical parameters, including TiO2 thickness, porosity, dye concentration, and iodine-based electrolyte concentration. We developed a novel figure of merit (FOM) to quantify the degradation rates, utilizing a finite element model (FEM) in COMSOL to simulate performance over time. 400 DSSC samples were fabricated, resulting in a comprehensive dataset comprising over 228,000 data points derived from experimental results and simulations. The findings reveal that PCE declines significantly over time, with an average initial efficiency of 4.0% for the DSSCs, dropping to approximately 0.5% after 360 h. …

Deployable Systems Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

What Are Mechanisms?

• Moving Mechanical Assembly (MMA)

• A device that controls the movement of a deployable or other movable system of a space or launch vehicle

• Why do mechanisms exist?

• 1) Fit within launch vehicle or dispenser
• 2) Stow for launch loads
• 3) Change position or pointing once on orbit
• 4) Deploy objects

Leveraging Oxygen Mobility With Zirconia In Low-Temperature Plasma For Enhanced Methane Reforming To Syngas, Fnu Gorky, Levy Pile, Grace Jones, Apolo Nambo, Mourad Benamara, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

Despite extensive efforts to optimize the single-step production of syngas, hydrocarbons, and oxygenates via plasma catalysis, several challenges remain unresolved. In particular, understanding the various reaction pathways is hindered by the complexity of the reactions and the diverse range of chemical products formed. In this study, our main objective is to evaluate and compare the influence of zirconia on reaction pathways, methane (CH4) and carbon dioxide (CO2) conversions (%), and syngas selectivity (%) relative to the plasma-only route. Experiments were conducted at a low radio-frequency plasma power of 50 Watts without external heating. The results demonstrated significantly enhanced conversions of …

Investigating Vacuum Insulator Flashover Resistance Of Rexolite And Acrylic Before And After Applying Novel Insulator Cleaning Techniques, Ritin Joseph

Electrical and Computer Engineering ETDs

Pulsed power involves accumulating large amounts of electrical energy and releasing it instantaneously. Large pulsed power accelerators use a vacuum insulator stack to facilitate power transfer from the liquid to vacuum section. Limiting the probability of surface flashover in this setting to acceptable levels improves machine longevity and prevents energy loss. Post-shot debris deposition requires a refurbishment process to prevent deterioration of dielectric performance, though the current technique of hand-sanding is long, labor-intensive, and pose serious health hazards. I have collected flashover data on frustrum-shaped Acrylic and C-Lec Rexolite® (cross-linked polystyrene) samples using a 500-kV, 20-ns risetime pulsed power test …

Summary Of: Immersive Modeling Of Water Banking Elicits Local Knowledge And Strategies To Get More Water To Great Salt Lake, Hadia Akbar, David E. Rosenberg

Civil and Environmental Engineering Student Research

Getting more water to the declining Great Salt Lake (GSL) is difficult. Strategies must address complex water rights, competing water needs, differing stakeholder priorities, historical legacies, lack of trust, and more arid and variable hydrology. Here we used immersive online collaborative modeling to explore water banking strategies to get more water to GSL. This 2-page brief describes the immersive modeling method, a Win-Win outcome, key results, new insights collaborators took from a model session, 2 new strategies to deliver water to GSL, and 3 next steps.

Analyzing The Interfacial Properties Of Natural Fiber Composites, Rahul Kumar Arram

Doctoral Dissertations and Master's Theses

In response to growing environmental concerns and the urgent demand for sustainable development, the composite materials industry is increasingly challenged to balance high performance with environmental responsibility. Conventional composites, typically composed of synthetic fibers and petroleum-based resins, offer outstanding mechanical properties but are associated with significant ecological drawbacks due to their non-biodegradable nature and energy-intensive production. This has led to increased interest in the development of sustainable composites that minimize environmental impact without compromising functionality. This study presents the development of eco-friendly composites reinforced with natural bast fibers—specifically ramie and jute—through a comprehensive program of materials processing and characterization. To …

A Comprehensive Review Of Software Requirements Dependencies Analysis Techniques, Nahla Mohamed, Sherif Mazen, Waleed Helmy

Iraqi Journal for Computer Science and Mathematics

The software Requirements Prioritization (RP) process is essential for producing a successful software project. Requirements are interdependent in software projects, so handling their dependency during the RP process is mandatory. Many researchers have shown that requirements dependency is challenging for large-scale systems. Extracting requirements dependency is difficult since requirements are documented in natural language. Improper handling of dependencies among requirements while prioritization can cause inaccurate prioritization results and deadlocks, which cause project delays, rework, and redesign. Many techniques have been introduced to automate the dependency analysis process among software requirements, including artificial intelligence (AI) and other logic-based methods such as …