Engineering Commons^™

Building Small Commercial Airport Clusters To Increase Marketing Capability, Dixie Button Phd, Rachel M. Vigness, Patti Clark

Publications

Building Small Commercial Airport Clusters to Increase Marketing Capability was presented at MBAA International, Chicago, IL in April, 2018.

Micropollutant-Free Nutrient Recovery: Adsorption Of Micropollutants On Ion Exchangers And Biosolids-Derived Biochar, Yiran Tong

Dissertations (1934 -)

The presence of excessive nutrients in treated wastewater effluent is a growing concern in terms of water quality and ecological balance. Thus, removal of nutrients is of great interest. Moreover, the removed nutrients can be recovered in forms amenable for agricultural reuse, which yields a sustainable supply of nonrenewable phosphorus that can be used to support global food production. As nutrient recovery gains interest, it is essential that the products be free of harmful contaminants. One class of contaminants of great concern is organic micropollutants. To help address these issues, this study evaluated the fate and impact of micropollutants during …

An Unsupervised Cluster: Learning Water Customer Behavior Using Variation Of Information On A Reconstructed Phase Space, Michele Rae Bizub Malinowski

Dissertations (1934 -)

The unsupervised clustering algorithm described in this dissertation addresses the need to divide a population of water utility customers into groups based on their similarities and differences, using only the measured flow data collected by water meters. After clustering, the groups represent customers with similar consumption behavior patterns and provide insight into ‘normal’ and ‘unusual’ customer behavior patterns. This research focuses upon individually metered water utility customers and includes both residential and commercial customer accounts serviced by utilities within North America. The contributions of this dissertation not only represent a novel academic work, but also solve a practical problem for …

Analysis Of Sensor Signals For Online Detection Of Hydrocarbons In Liquids In The Presence Of Interferents, Karthick Sothivelr

Dissertations (1934 -)

Current applicability of many chemical sensors is limited due to the lack of adequate selectivity to enable real-world applications. Often, the chemically sensitive element of the sensor is only partially selective to any specific target analyte, potentially giving rise to low probability of detection. Other challenges include the need to identify and quantify the target analytes in a mixture, especially in the presence of non-target interferents. In this dissertation, to enhance the selectivity of the sensor, analysis of sensor signals for detection and quantification of mixtures of hydrocarbon compounds in liquids in the presence of interferents using estimation theory and …

A Strategic Audit Of Medtronic Plc, Jozzy Carter

Honors Program: Senior Projects (Public)

Humans will always have a need for healthcare, and as the world continues to innovate in the tech space, consumers will demand advances in medicine and medical devices. Medtronic is at the forefront of this innovation but faces intense competition in the medical technologies industry. This poses the question: what can Medtronic do to continue its growth and stay competitive in this space? This paper offers an analysis of Medtronic as a medical device company by offering insight to its competitive advantage, financials, business mix, and value chain. It also analyzes the forces that affect Medtronic using SWOT, PEST, and …

Effects Of Surface Treatments On National Bridge Inventory Condition Ratings For Concrete Bridge Decks In Utah, John Taani De Leon

Theses and Dissertations

Although the application of surface treatments on bridge decks is expected to positively impact bridge deck condition, the effectiveness of specific surface treatments on extending bridge deck life has not yet been quantified on Utah bridge decks. Therefore, the objectives of this research were to develop and analyze deterioration curves for bare concrete bridge decks and decks with specific treatments commonly used in Utah. The scope of this study was determined by the types and extent of electronically available data, including selected static inventory information; maintenance, rehabilitation, and reconstruction histories; and National Bridge Inventory (NBI) condition ratings for the bridge …

Measuring And Calculating Current Atmospheric Phosphorous And Nitrogen Loadings On Utah Lake Using Field Samples, Laboratory Methods, And Statistical Analysis: Implication For Water Quality Issues, Jacob Milton Olsen

Theses and Dissertations

Atmospheric nutrient loading and transport though precipitation and dry deposition is one of the least understood yet one of the most important pathways of nutrient transport into many lakes. These nutrients, phosphorus and nitrogen, are essential for aquatic life and often play major roles in algae blooms that occur in lakes and reservoirs. Often heavy algal growth intensifies a variety of water quality problems. Utah Lake may be even more susceptible to atmospheric deposition due to its large surface area to volume ratio and proximity to Great Basin dust sources. In this study, eight months of atmospheric deposition data were …

Chloride Concentration And Blow-Through Analysis For Concrete Bridge Decks Rehabilitated Using Hydro-Demolition, Elizabeth Ashleigh Roper

Theses and Dissertations

The objectives of this research were 1) to investigate the effects of hydrodemolition treatment timing on chloride concentration profiles in concrete bridge decks for depths of concrete removal below the top mat of reinforcing steel and 2) to investigate factors that influence the occurrence of blow-throughs in concrete bridge decks when hydrodemolition is used. The research results are intended to provide engineers with guidance about the latest timing of hydrodemolition that can maintain a chloride concentration level below 2.0 lb of chloride per cubic yard of concrete at the levels of both the top and bottom mats of reinforcing steel, …

Effect Of Gyroscope Parameters On Gyroscopic Tremor Suppression In A Single Degree Of Freedom, Brendon Connor Allen

Theses and Dissertations

Although tremor is one of the most common movement disorders, there are few effective tremor-suppressing options available to patients. One potential tremor-suppression device involves a wearable gyrostabilizer similar to those used to stabilize cameras. However, we do not currently know how to design a gyrostabilizer to suppress tremor in an optimal manner. To address this gap, we present a systematic investigation of how gyrostabilizer parameters affect tremor suppression in a single degree of freedom (DOF). A simple model of the hand with a single DOF at the wrist and a gyroscope mounted on the back of the hand was used …

Visualization And Quantification Of Lipid And Protein In Single Microalgal Cell, Hina Laghari Mohammad Shakeel

Electrical Engineering Theses

Microalgae have the potential to be used as a main source of renewable energy in the future due to their lipid contents. Microalgae are comprised of several components including carbohydrates, lipids and proteins. This lipid and protein composition needs to be quantified so the amount of usable energy can be measured. Therefore, the main objective of this thesis is to develop an image processing technique for the quantification of lipid and protein contents in single microalgal cell.

This image processing technique has made lipid quantification an easier process as compared to previous methods used to quantify lipid content. The technique …

Experimental And Modeling Of Co2 Removal From Gas Mixtures Using Membrane Contractors Packed With Glass Beads., Farah O.S. Abuhatab

Chemical and Petroleum Engineering Theses

Natural gas is one of the major natural resources in UAE which carries significant amounts of acid gases. For the purpose of utilizing or liquefying, the gas must be pre-treated by separating the major non-hydrocarbon gases, namely C0₂. Typical C0₂ separation processes involve separation using sorbents or solvent, cryogenic or membrane. Among these processes, the chemical absorption considered to be the most effective process to remove C0₂. However, this process carries several drawbacks such as flooding, foaming, entraining, channeling, and most importantly high capital and operating costs.

An integrated unit called gas absorption membrane (GAM) …

Structural Identification And Assessment Of The Inverted Tee Girder Bridge System, Garrett P. D. Martindale

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Inverted Tee (IT) girder bridge system was originally developed in 1996 by the University of Nebraska–Lincoln (UNL) and Nebraska Department of Roads (NDOR) engineers. This bridge system currently accounts for over 110 bridges in Nebraska used for both state highways and local county roads. Excessive transverse and longitudinal deck cracking has been observed and noted in numerous bridge inspection reports. Since the IT girder bridge system is relatively new, limited data and knowledge exist on its structural performance and behavior. This study evaluates the IT girder bridge system by conducting twenty field observations as well as recording accelerometer time …

Simulation Of The Inertia Friction Welding Process Using A Subscale Specimen And A Friction Stir Welder, Ty Samual Dansie

Theses and Dissertations

This study develops a method to simulate a full-scale inertia friction weld with a sub-scale specimen and modifies a direct drive friction stir welder to perform the welding process. A torque meter is fabricated for the FSW machine to measure weld torque. Machine controls are modified to enable a force control during the IFW process. An equation is created to measure weld upset due to deflection of the FSW machine. Data obtained from a full-scale inertia friction weld are altered to account for the geometrical differences between the sub-scale and full-scale specimens. The IFW are simulated with the sub-scale specimen …

Force And Motion Based Methods For Planar Human-Robot Co-Manipulation Of Extended Objects, Erich Allen Mielke

Theses and Dissertations

As robots become more common operating in close proximity to people, new opportunities arise for physical human-robot interaction, such as co-manipulation of extended objects. Co-manipulation involves physical interaction between two partners where an object held by both is manipulated in tandem. There is a dearth of viable high degree-of-freedom co-manipulation controllers, especially for extended objects, as well as a lack of information about how human-human teams perform in high degree-of-freedom tasks. One method for creating co-manipulation controllers is to pattern them off of human data. This thesis uses this technique by exploring a previously completed experimental study. The study involved …

Effect Of Inclined Loading On Passive Force-Deflection Curves And Skew Adjustment Factors, Joshua Rex Curtis

Theses and Dissertations

Skewed bridges have exhibited poorer performance during lateral earthquake loading in comparison to non-skewed bridges (Apirakvorapinit et al. 2012; Elnashai et al. 2010). Results from numerical modeling by Shamsabadi et al. (2006), small-scale laboratory tests by Rollins and Jessee (2012), and several large-scale tests performed by Rollins et al. at Brigham Young University (Franke 2013; Marsh 2013; Palmer 2013; Smith 2014; Frederickson 2015) led to the proposal of a reduction curve used to determine a passive force skew reduction factor depending on abutment skew angle (Shamsabadi and Rollins 2014). In all previous tests, a uniform longitudinal load has been applied …

A Comparative Analysis Of Computer-Aided Collaborative Design Tools And Methods, Keenan Louis Eves

Theses and Dissertations

Collaboration has always been critical to the success of new product development teams, and the advent of geographically dispersed teams has significantly altered the way that team members interact. Multi-user computer-aided design (MUCAD) and crowdsourcing are two results of efforts to enable collaboration between geographically dispersed individuals. In this research, a study was done to investigate the differences in performance between MUCAD and single-user CAD teams, in which teams competed to create the best model of a hand drill. This was done across a three-day period to recreate the scenario found in industry. It was found that MUCAD increases awareness …

Evaluation Of Augmented Reality Glasses For Use In Flight Test Courses, Leonardo Macena Silveira

Theses and Dissertations

The objective of this thesis research was to analyze the implementation of new technologies into the flight test engineering major courses at Florida Institute of Technology. The focus was to use current augmented reality technology available in the market and create ways the students would be able to use it while performing experiments. Augmented reality is not the same as virtual reality. It is a technology that generates computer images of effect into an existing reality. In easier words, augmented reality projects images into the real-life surroundings the user locates. It allows the user to interact with the computer while …

Tracing Actin Filament Bundles In Three-Dimensional Electron Tomography Density Maps Of Hair Cell Stereocilia, Salim Sazzed, Junha Song, Julio Kovacs, Willi Wriggers, Manfred Auer, Jing He

Computer Science Faculty Publications

Cryo-electron tomography (cryo-ET) is a powerful method of visualizing the three-dimensional organization of supramolecular complexes, such as the cytoskeleton, in their native cell and tissue contexts. Due to its minimal electron dose and reconstruction artifacts arising from the missing wedge during data collection, cryo-ET typically results in noisy density maps that display anisotropic XY versus Z resolution. Molecular crowding further exacerbates the challenge of automatically detecting supramolecular complexes, such as the actin bundle in hair cell stereocilia. Stereocilia are pivotal to the mechanoelectrical transduction process in inner ear sensory epithelial hair cells. Given the complexity and dense arrangement of actin …

A Multi-Level Longitudinal Investigation Of Transformational Leadership Influence On Team Members Development In Engineering Project Teams, Nathapon Siangchokyoo

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of the current study is to contribute to the existing Transformational Leadership literature. Despite the overwhelming support that Transformational Leadership theory has garnered over the recent years, the underlying mechanisms and processes by which these leaders exert influence on their followers have yet to be adequately examined. More importantly, while the majority of advances in leadership research can largely be attributed to traditional areas of management and social sciences, studies of leadership in the context of engineering still remain relatively unexplored. Drawing on previous empirical research as well as the concept of Core Self-Evaluations, this study sets out …

Learn-To-Fly Control System Design, Alexander Brent Streit

Electrical & Computer Engineering Theses & Dissertations

In order to improve aircraft flight control system development life cycle, new flight control techniques are being explored to allow the system to ``learn-to-fly" with limited a priori information of the aircraft's aerodynamic characteristics. One approach is to have a system identification process operating on-the-fly to generate mathematical models which can be used to update control laws. In this thesis, a wind tunnel experiment was conducted with a model aircraft set up to be free-to-roll, so system identification and control methods could be explored for a one-degree-of-freedom case. In particular this thesis covers the design of a novel control system …

Anthropomorphically Inspired Design Of A Tendon-Driven Robotic Prosthesis For Hand Impairments, Manali Bapurao Bhadugale

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents the design of a robotic prosthesis, which mimics the morphology of a human hand. The primary goal of this work is to develop a systematic methodology that allows a custom-build of the prosthesis to match the specific requirements of a person with hand impairments. Two principal research questions are addressed toward this goal: 1) How do we cater to the large variation in the distribution of overall hand-sizes in the human population? 2) How closely do we mimic the complex morphological aspects of a biological hand in order to maximize the anthropomorphism (human-like appearance) of the robotic …

Flexural Behavior And Strength Of Doubly-Reinforced Concrete Beams With Hollow Plastic Spheres, Rutvik R. Patel

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of an investigation into the experimental and theoretical flexural behavior and strength of doubly-reinforced concrete beams with and without hollow plastic spheres. Tests are conducted on two types of beams having simply supported end conditions. To obtain experimental results, a gradually increasing two-point loading is used up to collapse. The experimental load-deflection and load-strain curves are recorded. Theoretical analysis is based on developing non-linear moment-curvature relationships for cross sections with and without hollow spheres. These moment-curvature relationships are then coupled with three separate numerical methods namely, finite difference method, finite integral method and Newmark’s method …

A Dual Resonant Transformer And A Dielectric Antenna For Picosecond Pulse Radiation, Khiem Huynh

Electrical & Computer Engineering Theses & Dissertations

This thesis discusses the development of a pulsed power system for high power picosecond pulse radiation. In the system, a charging transformer, which generates a high voltage pulse of ~100 kV, can be used for charging a transmission line in less than 100 ns. Such a short pulse could cause a peak gap switch to break down and generate a picosecond pulse transient for radiation. A dielectric antenna, if fed with the high voltage picosecond pulses, can radiate them to targets made of high dielectric materials. Biological tissues, for instance, can be targeted for electrostimulation.

The transformer was designed considering …

3d Bioprinting Systems For The Study Of Mammary Development And Tumorigenesis, John Reid

Electrical & Computer Engineering Theses & Dissertations

Understanding the microenvironmental factors that control cell function, differentiation, and stem cell renewal represent the forefront of developmental and cancer biology. To accurately recreate and model these dynamic interactions in vitro requires both precision-controlled deposition of multiple cell types and well-defined three-dimensional (3D) extracellular matrix (ECM). To achieve this goal, we hypothesized that accessible bioprinting technology would eliminate the experimental inconsistency and random cell-organoid formation associated with manual cell-matrix embedding techniques commonly used for 3D, in vitro cell cultures. The first objective of this study was to adapt a commercially-available, 3D printer into a 3D bioprinter. Goal-based computer simulations were …

Study Of Abc Membrane Transporters In Single Live Cells, Preeyaporn Songkiatisak

Chemistry & Biochemistry Theses & Dissertations

The multidrug ATP-binding cassette (ABC) membrane transporters (efflux pumps) are found in both prokaryotes and eukaryotes and they can extrude diverse structurally unrelated substrates, such as antibiotics and chemotherapeutic agents out of the cells. The efflux pumps are responsible for multidrug resistance (MDR) and the failure of numerous treatments in infections and cancers. All ABC membrane transporters share a common modular topology containing two transmembrane domains (TMDs) and two nucleotide binding domains (NBDs). The underlying molecular mechanisms regarding how the similar structural ABC membrane transporters could selectively extrude a wide variety of substrates and cause MDR, are not yet fully …

Continuous Top-K Monitoring On Document Streams (Extended Abstract), Leong Hou U, Junjie Zhang, Kyriakos Mouratidis, Ye Li

Research Collection School Of Computing and Information Systems

The efficient processing of document streams plays an important role in many information filtering systems. Emerging applications, such as news update filtering and social network notifications, demand presenting end-users with the most relevant content to their preferences. In this work, user preferences are indicated by a set of keywords. A central server monitors the document stream and continuously reports to each user the top-k documents that are most relevant to her keywords. The objective is to support large numbers of users and high stream rates, while refreshing the topk results almost instantaneously. Our solution abandons the traditional frequency-ordered indexing approach, …

Virtualization In Wireless Sensor Networks: Fault Tolerant Embedding For Internet Of Things, Omprakash Kaiwartya, Abdul Hanan Abdullah, Yue Cao, Jaime Lloret, Sushil Kumar, Rajiv Ratn Shah, Mukesh Prasad, Shiv Prakash

Research Collection School Of Computing and Information Systems

Recently, virtualization in wireless sensor networks (WSNs) has witnessed significant attention due to the growing service domain for IoT. Related literature on virtualization in WSNs explored resource optimization without considering communication failure in WSNs environments. The failure of a communication link in WSNs impacts many virtual networks running IoT services. In this context, this paper proposes a framework for optimizing fault tolerance in virtualization in WSNs, focusing on heterogeneous networks for service-oriented IoT applications. An optimization problem is formulated considering fault tolerance and communication delay as two conflicting objectives. An adapted non-dominated sorting based genetic algorithm (A-NSGA) is developed to …

Criteria-Based Encryption, Tran Viet Xuan Phuong, Guomin Yang, Willy Susilo

Research Collection School Of Computing and Information Systems

We present a new type of public-key encryption called Criteria-based Encryption (or , for short). Different from Attribute-based Encryption, in , we consider the access policies as criteria carrying different weights. A user must hold some cases (or answers) satisfying the criteria and have sufficient weights in order to successfully decrypt a message. We then propose two Schemes under different settings: the first scheme requires a user to have at least one case for a criterion specified by the encryptor in the access structure, while the second scheme requires a user to have all the cases for each criterion. We …

Safety Analysis Of Automatic Dependent Surveillance – Broadcast (Ads-B) System, Rajee Olaganathan

Publications

ADS-B is one of the significant implementation systems of NextGen, to help pilots and air traffic controllers to create a safer, and more efficient National Airspace System (NAS). First, this research paper will briefly describe the ADS-B system, its design structure, ADS-B In and ADS-B Out systems, its efficiency both in pilot applications and in air traffic control applications, and then discuss about the system safety analysis. The preliminary hazard analysis and fault tree analysis will be done for the identified and selected hazards, and will be briefly discussed. The paper will conclude by providing recommendations to prevent/mitigate the hazards …

Discovering The Data Of Safety: Embry-Riddle’S Aviation Safety And Security Archives, Melissa Gottwald, Michelle M. Bennett, Brent D. Bowen, Erin E. Bowen, Jordan I. Brown, Ed J. Coleman, Timothy B. Holt, William D. Waldock

Publications

The path to the sky and beyond has not been simple or obstacle-free, but dedicated dreamers have worked to overcome obstacles, learn from mishaps, and develop new technologies to achieve their goals. As the leading university for aviation and aerospace education, Embry-Riddle Aeronautical University maintains a firm commitment to the practice and study of safety. As part of this mission, the university has established the Aviation Safety and Security Archives (ASASA) which is a national treasure of aviation safety history and information.