Engineering Commons^™

Panelized Workforce Housing, Brock H. Armstrong

Construction Management

This study analyzes the utility of a panelized exterior wall system in workforce housing. First, it introduces why the need for the project exists. Second, it touches on how Cal Poly procured the project and who the client is. Third, it lays out how the project was dealt with as far as its structure and the roles of the students taking part in the cohort. Fourth, it looks at the process of designing the panels, the various restrictions the students had to deal with in designing them, and how the panels changed over time due to new constraints being made …

Creating An Organized/Safer Way For Contractors To Carry Oversized Spare Tires, Thomas Arismendi

Construction Management

Construction is an industry that needs trucks/vehicles to travel across large dirt construction sites without getting stuck. This typically means upgrading to a larger wheel width/diameter to create the largest possible surface area for the tire to cover while off-road. Managing to get a flat tire whether it is rolling a bead in the dirt from being aired down or running over objects such as nails/screws, it is always important to carry a spare tire that fits the application. This causes an increased need to safely lock down an oversized spare when the time comes for one. Most of the …

The Feasibility Of Implementing Solar Power On Construction Sites, Jordan Alves

Construction Management

The purpose of the research conducted in this project is to determine the feasibility of implementing solar on a construction site as means of providing power. Power requirements as well as costs from the established sources were compared to the current costs of solar, more importantly, to the current cost of the specific solar setup needed to provide consistent power to the site. As a baseline, the project power requirements were based of the requirements of the civil site the generator data was pulled from.

Case Study: Proven Benefits Of Insurance Backed Stretch And Flex Programs With Cdm Smith, Colin Dzubnar

Construction Management

Safety is the most important aspect of the construction industry. Due to daily strenuous physical activities that occur on a construction jobsite, having your body warmed up, pain-free and ready to perform labor intensive tasks is critical. This case study will examine the correlation between the past and present daily stretching format at the construction jobsite with CDM Smith and Insurance Company. For continuity, it will include an interview with the same CDM Smith Region H&S Manager as well as similar surveys to find out the construction workers thoughts and reactions to stretching prior to work. Although IO to 20 …

Contextual Framework Of Communications Functions Supporting Complex System Governance, Charles Wesley Chesterman Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a systems theory-based contextual framework of communication functions supporting complex system governance using an inductive research design. Communication, as one aspect of Management Cybernetics (communication and control for effective system organization) constructed of channels of communication, provides for the movement of information internally and externally for a system. This flow reflecting new information, decisions, questions, and intelligence is critical for viability of a system. This research looked for communication mechanisms as developed in system theory, communication theory, management theory, and organizational theory. The literature indicates the importance of communications, but a systemic …

Behavior Of Piled Raft Foundation In Partially Saturated Soils, Salman Alrubaye

Civil & Environmental Engineering Theses & Dissertations

Current foundation design practice considers conventional pile group foundation when simpler and rather economical raft foundations do not meet one of the design criteria. However, design requirements could be met by incorporating a reduced number of piles with the raft. Piled Raft foundation (PRF) is a composite foundation in which, the piles and the raft contribute to the total resistance of the foundation.

The objective of this dissertation is to study the behavior of PRF in fully and partially saturated soils. The primary purpose of this study is to develop models capable of estimating the resistance of different types of …

Techno-Economic And Life Cycle Assessment Of Hydrothermal Processing Of Microalgae For Biofuels And Co-Product Generation, Andrew P. Bessette

Civil & Environmental Engineering Theses & Dissertations

Traditional processing methods of algae to biofuels require dewatering after harvesting of the algae before the lipids can be extracted. This is typically the most energy intensive and therefore the most expensive step. Old Dominion University (ODU) has successfully utilized a flash hydrolysis (a kind of hydrothermal) process where proteins are solubilized into the liquid phase of product and the remainder lipid-rich, low nitrogen product is separated into a solid phase. The solid phase (lipid-rich) is then an ideal candidate for biofuel feedstock and the liquid phase, or hydrolysate, can be used for coproducts such as a source of nutrients …

Simplified, Alternative Formulation Of Numerical Simulation Of Proton Exchange Membrane Fuel Cell, Russell L. Edwards

Mechanical & Aerospace Engineering Theses & Dissertations

Three-Dimensional proton exchange fuel cell (PEMFC) operation in steady-state is simulated with computational fluid dynamics / multiphysics software that is based upon the finite-element method. PEMFC operation involves the simultaneous simulation of multiple, interconnected physics involving fluid flows, heat transport, electrochemical reactions, and both protonic and electronic conduction. Modeling efforts have varied by how they treat the physics occurring within and adjacent to the membrane-electrode assembly (MEA). Several approaches treat the MEA as part of the computational domain, solving multiple, and coupled conservation equations via the CFD approach within the 3 regions of the MEA. The thickness dimensions of the …

The Evaluation Of Enhancing Biological Phosphorus Removal And Improving Settleability Using Mainstream Hydrocyclones For External Selection, Amanda Carrie Ford

Civil & Environmental Engineering Theses & Dissertations

Hydrocyclones, which receive mixed liquor tangentially, separate lighter solids from more dense solids through their tapered shape. Increasing the velocity of liquid as it moves downward allows for the selection of a desired solids fraction. Limited research has been conducted utilizing 20 m³hr^-1 hydrocyclones, with the intent of improving settleability and biological phosphorus removal (Bio-P) for mainstream processes. Improved settleability would allow for increased capacity in the secondary clarifiers which prevents the loss of biomass and subsequent treatment disruption, especially during wet weather scenarios. In addition, treatment intensification can be accomplished by maintaining a higher mixed liquor …

To Relive The Web: A Framework For The Transformation And Archival Replay Of Web Pages, John Andrew Berlin

Computer Science Theses & Dissertations

When replaying an archived web page (known as a memento), the fundamental expectation is that the page should be viewable and function exactly as it did at archival time. However, this expectation requires web archives to modify the page and its embedded resources, so that they no longer reference (link to) the original server(s) they were archived from but back to the archive. Although these modifications necessarily change the state of the representation, it is understood that without them the replay of mementos from the archive would not be possible. Unfortunately, because the replay of mementos and the modifications made …

High-Intensity Variable Stepping Training In Patients With Motor Incomplete Spinal Cord Injury: A Case Series, Carey L. Holleran, Patrick W. Hennessey, Abigail L. Leddy, Gordhan B. Mahtani, Gabrielle Brazg, Brian D. Schmit, T. George Hornby

Biomedical Engineering Faculty Research and Publications

Background and Purpose: Previous data suggest that large amounts of high-intensity stepping training in variable contexts (tasks and environments) may improve locomotor function, aerobic capacity, and treadmill gait kinematics in individuals poststroke. Whether similar training strategies are tolerated and efficacious for patients with other acute-onset neurological diagnoses, such as motor incomplete spinal cord injury (iSCI), is unknown. Individuals with iSCI potentially have greater bilateral impairments. This case series evaluated the feasibility and preliminary short- and long-term efficacy of highintensity variable stepping practice in ambulatory participants for more than 1 year post-iSCI.

Case Series Description: Four participants with iSCI (neurological levels …

Quantifying Sea-Level Rise Hazard Addressing Climate Forcing And Projection Uncertainty, Matthew Thomas

Dissertations (1934 -)

Sea-level rise, driven by climate change, puts coastal communities and ecosystems at risk. Major sources that contribute to sea-level rise include ocean thermal expansion, glacier loss, and ice sheet loss. Here we account for uncertainty in modeling these sources, along with climate forcing uncertainty.Ocean thermal expansion uncertainty is modeled using a probabilistic ensemble of climate models and climate forcing scenarios. The ensemble addresses model uniqueness and weights models and scenarios based on their ability to reproduce observed sea-level trends. Glacier sea-level rise is modeled by updating an existing glacier mass balance model with a probabilistic regional covariance model that addresses …

Development And Application Of Quantitative Metrics For Computed Tomography Image Quality Assessment, Parag Khobragade

Dissertations (1934 -)

Selecting the tube current can be challenging when using iterative reconstruction algorithms due to the varying relationship between spatial resolution, contrast, noise, and dose across different algorithms. The objective of this dissertation was to develop and evaluate an Automated Exposure Control (AEC) method for iterative reconstruction algorithms using a task-based image quality metric. To achieve this objective, several CT image quality metrics were evaluated and developed. Two studies were performed to evaluate candidate metrics for use in a task-based AEC method. In Aim 1, a study was performed to identify and experimentally evaluate candidate metrics that have been previously proposed …

An Embeddable Strain Sensor With 30 Nano-Strain Resolution Based On Optical Interferometry, Chen Zhu, Yizheng Chen, Yiyang Zhuang, Fujian Tang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

A cost-effective, robust and embeddable optical interferometric strain sensor with nanoscale strain resolution is presented in this paper. The sensor consists of an optical fiber, a quartz rod with one end coated with a thin gold layer, and two metal shells employed to transfer the strain and orient and protect the optical fiber and the quartz rod. The optical fiber endface, combining with the gold-coated surface, forms an extrinsic Fabry—Perot interferometer. The sensor was firstly calibrated, and the result showed that our prototype sensor could provide a measurement resolution of 30 nano-strain (nε) and a sensitivity of 10.01 µε/ µm …

A Novel Deep Junction Edge Termination For Superjunction Mosfets, Chia Hui Cheng, Chih Fang Huang, Kung Yen Lee, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, a novel edge termination named deep junction termination for silicon super junction (SJ) MOSFETs is proposed, simulated, and experimentally demonstrated for the first time. By utilizing a typical implantation-and-epitaxy process to form P- and N-pillars for SJ, it is possible to form deep junctions as the device termination with a large radius of curvature and lateral and vertical doping gradation. The 2-D simulation shows that more than 700-V blocking voltage (BV) can be achieved by a 57-drift layer with this novel termination, and experimentally BV as high as 660 V is demonstrated by the fabricated device.

Understanding How Engineering Identity And Belongingness Predict Grit For First-Generation College Students, Dina Verdín, Allison Godwin, Adam Kirn, Lisa Benson, Geoff Potvin

School of Engineering Education Graduate Student Series

Increasing the participation of underrepresented students, including first-generation college students, in engineering plays a central role in sustaining the U.S. research and innovation capacity. Diversity continues to be recognized as an asset in engineering. However, we also know that the culture of engineering has an implicit assumption about who can be and who is recognized as an engineer. There is also a complex relationship between participation in a community of practice and identity. Diverse students must not only author an identity as an engineer but also must grapple with how that identity, historically constructed as white and masculine, becomes a …

First-Generation College Students Identifying As Future Engineers, Dina Verdín, Allison Godwin

School of Engineering Education Graduate Student Series

This paper seeks to understand factors that influence how first-generation college students identify as engineers now and in the future. Data used in this study came from four U.S. institutions obtaining a total first-generation college student sample of 596 participants. We used future possible selves as a lens to understand how first-generation college students’ current views of themselves as engineers shape their future identities as engineers. Two separate analyses were conducted. First, a multiple regression analysis was used to determine which career future satisfaction variables predicted first-generation college students current and future identification as engineers. Second, a hierarchical regression analysis …

Materials Design With Polylactic Acid-Polyethylene Glycol Blends Using 3d Printing And For Medical Applications., Jeremiah R. Bauer

Electronic Theses and Dissertations

This thesis is an examination of two material systems derived from polylactic acid (PLA) and polyethylene glycol (PEG). PLA is a polymer commonly sourced from renewable sources such as starches and sugars. It is a relatively strong, biodegradable polymer, making it ideal for use in the body. Even though it has a relative high strength, PLA is also brittle leading to the use of plasticizers to increase flexibility. One such plasticizer is PEG, which is a material that can exist at room temperature as either a thin liquid, or a hard waxy solid depending on the molecular weight. The first …

Sum Frequency Generation Spectroscopy Of Simulated Protein Secondary Structures., Andrew J. Adams

Electronic Theses and Dissertations

Sum frequency generation (SFG) spectroscopy is an experimental technique for differentiating between various conformations and orientations of interfacial proteins. Combining a theoretical framework for SFG with molecular dynamics (MD) simulations provides a powerful tool for studying systems containing interfacial proteins with applications in cell transport, biofilms, and fermentation processes. Roeters’ method was used to calculate theoretical SFG responses for a variety of individual α-helix and β-sheet peptide secondary structures simulated using MD. Results show how the shape and locations of SFG amide I responses change with differences in hydrogen bonding patterns, peptide orientations, and SFG polarization combinations. The data presented …

Design And Development Of A Multifunctional Surgical Device For Ground And Space-Based Surgical Applications., Brooke Elaine Barrow

Electronic Theses and Dissertations

With the possibility of longer ventures into space, NASA will face many new medical challenges. The ability to surgically treat trauma and other disorders in reduced gravity requires reliable wound access, containment, and visualization. In collaboration with Carnegie Mellon University, the University of Louisville is currently developing the AISS (Aqueous Immersion Surgical System) to increase efficiency and control of the operative field in space-based surgeries. Reliable wound access and containment is achieved by placing a transparent wound-isolation dome securely over the wound-site and pressurizing it with a saline solution. Leak-free trocars provide access ports for various surgical instruments. This system …

Tumor-Targeted Double Emulsions For Ultrasound-Triggered Delivery Of Molecular Therapeutics., Connor S Centner

Electronic Theses and Dissertations

Cancer is the second leading cause of death in the United States, with 1.74 million new cancer cases diagnosed and 610,000 cancer deaths expected in 2018 alone. Current treatments often result in negative systemic effects and ineffective treatment of the tumor. Drug delivery vehicles have been developed for more effective local delivery methods, but many drug delivery vehicles lack spatial and temporal control. Targeted double emulsions are a new class of drug delivery vehicles which present a promising option for a high payload and controlled delivery. The purpose of our project was to develop and characterize an aptamer-chelated double emulsion …

The E-Agriculture Research Landscape In South Africa: A Systematic Literature Review, Alain Nzuzi Kintoki

The African Journal of Information Systems

Despite the growing interest in e-agriculture research in South Africa, academic studies have not sufficiently and deeply investigated the current e-agriculture research trends in the South African context. It is unclear how primary e-agriculture research in South Africa will aid both current and future generations to create new and better ways to transform agricultural development using this modern technology. This study sought to determine the current status of e-agriculture research in the South African context. A systematic literature review was used to gather and analyze data. The results indicate that 17 papers (26.5%) were published during the first two years …

Swelling As A Stabilizing Mechanism During Ion Bombardment Of Thin Films: An Analytical And Numerical Study, Jennifer M. Swenson

Mathematics Theses and Dissertations

Irradiation of semiconductor surfaces often leads to the spontaneous formation of rippled structures at certain irradiation angles. However, at high enough energies, these structures are observed to vanish for all angles, despite the absence of any identified, universally-stabilizing physical mechanisms in operation. Here, we examine the effect on pattern formation of radiation-induced swelling, which has been excluded from prior treatments of stress in irradiated films. After developing a suitable continuum model, we perform a linear stability analysis to determine its effect on stability. Under appropriate simplifying assumptions, we find swelling indeed to be stabilizing at wavenumbers typical of experimental observations. …

Pilots’ Likelihood To Quit Flying In Part 121 Commercial Aviation, Gajapriya Tamilselvan

Theses and Dissertations

The purpose of the study was to develop a statistical model representing predictors to anticipate pilots’ likelihood to quit flying in Part 121 Commercial Aviation. The study was primarily focused on the current Part 121 pilots in the United States. The study was designed with a correlational methodology and multiple linear regression was employed as the statistical procedure to analyze the data collected from diverse sources. The sample of the study consists of 163 participants (33 females), and all of them currently working for either major or regional airline in the United States respectively. Simultaneous regression strategy was used to …

Unsupervised Parkinson’S Disease Assessment, Alexander S. Adranly, Senbao Lu, Yousef Zoumot

Interdisciplinary Design Senior Theses

Parkinson’s Disease (PD) is a progressive neurological disease that affects 6.2 million people worldwide. The most popular clinical method to measure PD tremor severity is a standardized test called the Unified Parkinson’s Disease Rating Scale (UPDRS), which is performed subjectively by a medical professional. Due to infrequent checkups and human error introduced into the process, treatment is not optimally adjusted for PD patients. According to a recent review there are two devices recommended to objectively quantify PD symptom severity. Both devices record a patient’s tremors using inertial measurement units (IMUs). One is not currently available for over the counter purchases, …

Performance Prediction Of Concrete Deep Beams Containing Cutouts Internally- Reinforced With Composite Bars, Somoud Jebril Arabasi

Theses

The development of code provisions for the use of strut-and-tie model (STM) in structural design has been hindered by great uncertainties due to the lack of experimental evidences. The problem becomes more complex when the conventional steel reinforcing bars around disturbed regions are replaced by non-metallic composite reinforcement. This research aimed to investigate the structural behavior of concrete deep beams with cutouts internally reinforced with glass fiber-reinforced polymer (GFRP) bars around regions of discontinuities. Different STMs were developed for the design of GFRP-reinforced concrete deep beams. The models were analyzed through the use of ACI 318 (2014) and CSA S806 …

Airline Customer Satisfaction 2015-2017 Results, Michelle M. Bennett, Brent D. Bowen, Erin E. Bowen, Z. Bowen, Dean Headley, Timothy B. Holt, Jacqueline R. Luedtke

Publications

Previous research on perceptions, satisfaction, and attitudes regarding the major commercial air carriers in the United States has provided little more than an interesting descriptive representation of the average air traveler. This study moves beyond basic descriptive information of air travelers to identify attitudinal patterns and relationships in the way consumers at varying levels of travel frequency view the commercial air industry. The Airline Passenger Survey (APS) elements developed via the utilization of rigorous scientific methodology, with the intention of capturing the most important data from passengers while reducing confusion or variability in comprehension of questions. APS items are a …

Non-Newtonian Fabric-Fluid Composites: Fabrication, Characterization And Testing For Anti-Ballistics Applications, Hayley M. Weir

All Theses

This thesis aims to characterize non-Newtonian suspensions for anti-ballistics applications. This involves characterizing the rheological behavior of each suspension. It also includes characterizing the interactions of the suspensions with several types of fabrics with known antiballistics properties. The study also tests the armor composites under ballistics stresses by firing on them with standardized military weaponry. This data is then compiled to determine which, if any, of the fabrics and suspensions are ultimately suitable for anti-ballistics uses.

Traffic Characterization Of An Internet Of Things(Iot) Network Architecture, Maitha Saif Salem Mohammed Alderei

Electrical Engineering Theses

Internet of things (IoT) is an evolving paradigm that is currently getting more attention and rapidly gaining importance. The basic idea of IoT is to connect everyone and everything to the Internet for information exchange. It is essential to develop a clear understanding of characteristics of IoT traffic sources as well as to find a traffic model that efficiently characterizes the statistical behavior of IoT traffic. Since many IoT devices generate relatively small sized data, we are particularly interested in an IoT network architecture where data from a number of different IoT devices are aggregated at an IoT gateway. We …

Development Of Rule-Based Recognition Systems For Continuous Monitorization Of Pulse Oximetry, Brian Delehanty

Senior Theses

Pulse Oximeters provide a convenient, non-invasive method to quickly gather information about a patient's pulse rate (PR) and arterial blood oxygen saturation (SpO₂). Many pulse oximeters lack alert systems that notify caregivers if a patient's readings go outside the healthy range, and pulse oximeters that have these mechanisms are significantly more expensive. This project set out to write a program using LabVIEW that collects pulse oximeter data via Bluetooth and generates an alert when readings persist in the abnormal range for more than fifteen seconds. Due to privacy laws that allow pulse oximeter manufacturers to not disclose the …