Engineering Commons^™

Mechanism Of Virus Inactivation By Cold Atmospheric-Pressure Plasma And Plasma-Activated Water, Li Guo, Ruobing Xu, Lu Gou, Zhichao Liu, Yiming Zhao, Dingxin Liu, Lei Zhang, Hailan Chen, Michael G. Kong

Bioelectrics Publications

ABSTRACT Viruses cause serious pathogenic contamination that severely affects the environment and human health. Cold atmospheric-pressure plasma efficiently inactivates pathogenic bacteria; however, the mechanism of virus inactivation by plasma is not fully understood. In this study, surface plasma in argon mixed with 1% air and plasma-activated water was used to treat water containing bacteriophages. Both agents efficiently inactivated bacteriophages T4, ϕ174, and MS2 in a time-dependent manner. Prolonged storage had marginal effects on the antiviral activity of plasma-activated water. DNA and protein analysis revealed that the reactive species generated by plasma damaged both nucleic acids and proteins, consistent with the …

A Comparative Study Of Constant Power Operation Techniques For Low Inductance Machines, Damien Lawhorn, Narges Taran, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

In traditional electric machines, it is usually possible to achieve constant power high-speed operation by employing field weakening through the injection of a negative d-axis current component. However, in machines with low armature inductance, such as high power density permanent magnet synchronous machines, and more specifically, coreless machines, which are gaining increasing attention because of their high specific torque, the extended speed range obtained using this method is very narrow. This paper summarizes the performance characteristics of existing approaches for obtaining constant power operation and proposes two new techniques, specially applicable to coreless axial flux permanent magnet machine namely, current …

Occupant Comfort And Energy Efficient Design For Academic Buildings In Tropical Climate, T S Sudheer Kumar

Manipal Journal of Science and Technology

The increased energy usage in buildings and infrastructure indicates that alternate means must be adopted to improve efficiency, conserve energy, and to operate the buildings with sustainable means. The energy demands must be reduced to develop energy efficient buildings for the future, without compromising the thermal and visual comfort level and performance of the building. For the buildings, energy efficiency can be achieved by using appliances of less wattage, improved architectural technique, and modified construction methodology. The energy analyzing software eQuest was used to simulate the building to meet the occupants’ thermal comfort and lighting software DialuxEvo was used to …

Root Cause Analysis Of Inlet Hole And Leak Off Hole Operation Missing Problem In Common Rail Injector Body Using Shainin Approach, Himanshu Sawant

Manipal Journal of Science and Technology

The two major challenges that industries are facing today are continuous improvement in productivity and quality of the product. Bosch Production System (BPS) is one of the leading manufacturers in diesel system equipment. Fuel Injector is the main product of Bosch India Nashik. This plant produces around 10,000 injectors per day. They have a mass production and it may happen that in such a mass production there might be some part missing in the operation. Such missing operation parts contribute a lot in defect cost. There are two holes in an injector body- inlet hole and leak off hole with …

Prediction Of Drugs To Be Prescribed To A Diabetic, Ojasva Jain

Manipal Journal of Science and Technology

The purpose of this research is to review the outcome measures used to evaluate a prevailing disease, in this case, diabetes and make recommendations for the incoming future patients.

Comparative Analysis Of Cooperative Sensing Techniques In Cognitive Radio, H Srikanth Kamath

Manipal Journal of Science and Technology

Cognitive radio is an intelligent radio network that has the capability of recognizing when the spectrum is idle and unused by the licensed users to allot those frequencies to unlicensed users, thus increasing spectral efficiency. Spectrum sensing is a significant step in cognitive radio. Its senses the spectrum of interest to identify the presence or absence of a primary or a licensed user and detects spectrum holes. Cooperative spectrum sensing enhances spectrum sensing as it improves the spectrum efficiency by exploiting spatial diversity. In this paper, we have discussed the three most popular sensing techniques which are; energy detection, cyclo-stationary …

An Integrated Decision Support Framework For Life-Cycle Building Asset Management, Maha Reda Alkasisbeh

Dissertations

Building assets are essential to the economic, cultural, and historical growth of any nation. Examples of buildings include shelters, entertainment facilities, living spaces, teaching facilities, civil offices, parking structures, police buildings, libraries, and service areas used to accommodate human activity. Deterioration of building assets, inadequate renewal budgets, climbing deficits, and increasing demand levels are difficulties that face owners when managing building assets. The role of asset management has recently become significant in municipal governments for strategic, operational, and financial reasons. The main functions of an asset management system include assessment of the current condition, prediction of future deterioration, asset prioritization, …

Deterioration Prediction Modeling For The Condition Assessment Of Concrete Bridge Decks, Aqeed Moshin Chyad

Dissertations

Bridges are key elements in the US transportation system. There are more than six hundred thousand bridges on the highway system in the United States. Approximately one third of these bridges are in need of maintenance and will cost more than $120 billion to rehabilitate or repair. Several factors affect the performance of bridges over their life spans. Identifying these factors and accurately assessing the condition of bridges are critical in the development of an effective maintenance program. While there are several methods available for condition assessment, selecting the best technique remains a challenge. Therefore, developing an accurate and reliable …

Optimized Insulation And Filter Design Of Rotating Machines Fed By Fast Front Pulses, Mohammed Khalil Hussain

Dissertations

AC rotating machines are exposed to fast front pulses when fed from inverters. This type of excitation produces dielectric stress in the machine’s insulation system that can result in premature deterioration or even failure.

In this dissertation, a non-uniform transmission line model to predict the transient voltage distribution in a machine coil under steep-fronted surge conditions is described and implemented. This model is a function not only of frequency but also of space to represent the variation of electrical parameters in the overhang and slot regions of the coil. These parameters are computed using the finite element method. In order …

Measurements Of Fluid Structures And Mass Transport In Channel With Fabric Base, Karl David Mcallister

Dissertations

This thesis studies the relationships between flow structures and mass transport (dye concentration) within a Poiseuelle water flow glass chamber using optical flow experimental techniques in turbulent conditions. Through optical flow methods, velocity, vorticity, kinetic energy, Reynolds stress and turbulent production metrics where determined by laser illuminated glass beads and Rhodamine 6G dye removing from three different fabric substrates for multiple horizontal planes and one vertical plane. From the dye intensity, mass concentration metrics were determined providing visualization of velocity and mass transport simultaneously along with kinetic energy, mass flux, and concentration fluctuations.

A 3d Simulation Of Leukocyte Adhesion In Blood Flow, Tai-Hsien Wu

Dissertations

It has been widely acknowledged that further understanding about the dynamics between blood cells and blood flow can help us gain more knowledge about the causes of diseases and discover more effective treatments. Examples of such dynamics include red blood cell (RBC, or erythrocyte) aggregation, white blood cell (WBC, or leukocyte) margination, and WBC extravasation. WBC extravasation is an important multiple-step process in the inflammatory response and therefore has drawn considerable attention over the past two decades. In this multiple-step process, a WBC undergoes at least four steps, including capture, rolling, firm adhesion, and transmigration, and each step is influenced …

Bubble Nucleation In Superhydrophobic Microchannels Due To Subcritical Heating, Adam Cowley, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

This work experimentally studies the effects of single wall heating on laminar flow in a high-aspect ratio superhydrophobic microchannel. When water that is saturated with air is used as the working liquid, the non-wetted cavities on the superhydrophobic surfaces act as nucleation sites and allow air to effervesce out of the water and onto the surface when heated. Previous works in the literature have only considered the opposite case where the water is undersaturated and absorbs air out the cavities for a microchannel setting. The microchannel considered in this work consists of a rib/cavity structured superhydrophobic surface and a glass …

Universal Airfoil Parametrization Using B-Splines, Dev Rajnarayan, Andrew Ning, Judd Mehr

Faculty Publications

In this paper, we apply well-known techniques for parametric curves to the definition and deformation of airfoil sections. While it has already been shown that many versions of Kulfan’s Class Shape Transformation (CST) are exactly equivalent to Bézier curves, we show here that all NACA 4-digit thickness distributions and the PARSEC parametrization of Sobiezcky are also higher-order Bézier curves. As with CST, Béziers and B-Splines provide direct control over aerodynamically meaningful features such as nose radius and boat-tail angle, but also provide more a intuitive parametrization of the rest of the airfoil surface. We show the efficacy of B-Spline-based parametrizations …

Assessing Scrum Project Management And Teamwork In Electrical And Computer Engineering Courses, Branimir Pejcinovic, Robert B. Bass, Phillip Wong

Electrical and Computer Engineering Faculty Publications and Presentations

Teamwork and project management are essential skills for engineering students, as recognized in the proposed new ABET topic area 7. Our team of instructors exposes students to project management techniques at multiple levels within our undergraduate ECE program. By learning project management early and practicing it often, students improve their teamwork efficacy in projects, courses, and in their future careers. Scrum is a cyclical project management technique commonly used in high-tech industries. Scrum provides a framework that facilitates teamwork through an adaptable and incremental process. Our variant of scrum is tailored to students working on engineering projects in a higher-education …

Optimizing Available Surveying Technology To Streamline Project Delivery, Christopher Van Dyke, Adam J. Kirk, Steven Waddle, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Kentucky Transportation Cabinet (KYTC) Project Managers bear responsibility for preparing all phases of highway projects, from initial concept to letting, while Section Engineers manage all phases of highway construction projects, from letting to completion. To perform the activities for which they are responsible, these stakeholders require knowledge of best practices for leveraging current surveying methodologies and equipment. With survey technologies having advanced significantly over the past 15-20 years, staff attrition at the Cabinet depleting its in-house surveying expertise, and contractors frequently undertaking their own surveying, acquiring this knowledge has become increasingly difficult. Drawing on a series of interviews with KYTC …

Characterization Of Solid Oxide Fuel Cells With Lscf-Sdc Composite Cathodes, Gianfranco Digiuseppe, Venkatesh Boddapati

Mechanical Engineering Publications

This paper reports the study of an anode-supported SOFC cell containing an LSCF-SDC composite cathode. The SOFC cell was tested at different temperatures and reactant flow rates. After testing, the cell was sectioned and characterized using SEM/EDS. Such analysis indicated that no structural damage and no significant interdiffusion of elements among the layers occurred. The measured electrochemical performance data at different temperatures indicate an Arrhenius behavior or temperature activated processes. The low-porosity anode functional layer appears to be very sensitive to low hydrogen contents. The electrochemical performance is also affected by changing air flow rates.

Annuloplasty Mti: Improved Tooling For Annuloplasty Ring Manufacturing, Justin David Smith, Spencer Lee Combs, Luke Edward Maly

Mechanical Engineering

The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …

Senior Project - Roborodentia Robot, Nicholas Alexander Ilog

Computer Engineering

This project includes an autonomous robot capable of dispensing balls from a dispenser mounted on a wall and shooting the balls through targets five to eight feet away. The robot can hold up to five balls at a time and shoots balls one by one at targets.

Multi-Physics Modeling For Electric And Hybrid Vehicles With In-Wheel Electric Motors, Vandana Rallabandi, Damien Lawhorn, Dan M. Ionel, Xiao Li

Power and Energy Institute of Kentucky Faculty Publications

This paper discusses multi-domain and multi-physics modeling of in-wheel electric vehicles using ANSYS Simplorer and ANSYS Maxwell. The study includes component level modeling of the vehicle, brakes, wheels, battery, traction motor, inverter, solar panels and boost converter. The traction motor used is an axial flux permanent magnet synchronous machine. In order to accommodate both the large time constants of the mechanical system and the high switching frequency power electronics, average models of the inverter and boost converter are considered. Simulation examples are provided for the University of Kentucky Gato Del Sol V car.

Increased Energy Yield Through Fast Pyrolysis: Empowering Malawian Villages, Diehl Mutamba

Undergraduate Honors Theses

Biomass contributes to several renewable energy technologies. This project will explore the use of fast pyrolysis to produce fuels by designing an apparatus for fast pyrolysis. Malawian people harvest firewood from the forests, which is a major contributor to deforestation. Furthermore, they convert some of it to charcoal with about 10-15% efficiency to sell to city dwellers. The project will enable herbaceous fuels to replace wood, increase charcoal yields and create new products. Firewood and charcoal produce smoke and carbon monoxide (CO) that compromises the villagers’ health.

This project will address deforestation problems, improve sustainability, decrease health hazards and improve …

Collision Avoidance Smartphone, Matt Columbres, Aaron Parisi, Joey Schnecker, Luis Wong

Electrical Engineering

There are many instances in day-to-day life where people cannot or would rather not pay full attention to their surroundings. Walking while preoccupied with a smartphone or walking while blind are excellent examples where technology could be used to make the task of avoiding 2collisions reactive, instead of proactive. A device which monitors a user’s surroundings and notifies the user when a potential collision is detected (and, additionally, notifying them as to where the obstacle is with respect to them) could be used to make walking distracted less of a hazard for the user and those around the user and …

Dc House Solar Panel Cleaner, Sarahanne Heredia, Sophia Deguia

Electrical Engineering

Solar panels lose 0.05% of their power conversion efficiency per day due to soil accumulation, according to an experiment conducted by the University of California, San Diego in 2013 [18]. The project is an electro-mechanical cleaning system that effectively and efficiently cleans solar panels at set intervals. A drip irrigation system with spray jets was attached to a water pump and Arduino, both powered by the DC House Project solar panel battery. The DC House solar panel was the targeted panel set up for the project. Several components of the design could have been chosen more optimally for the system; …

Circuit Breaker Module, Garvin Yee, Yei Trinh

Electrical Engineering

The circuit breaker module for this design project is a proof of concept that demonstrates the functionality, feasibility, and attainability of a consumer grade power systems analysis device suitable for college laboratory use. The goal of this project was to create the final iteration of a module that has been developed and refined over the course of previous years. The Cal Poly Electrical Engineering Department intends to use this design to produce circuit breaker modules intended for fault analysis. With the current changes made to the previous modules, the current circuit breaker is lighter, safer, and more universally reproducible. The …

Beam Scanning Realized By Coupled Modes In A Single-Patch Antenna, Haozhan Tian, Kirti Dhwaj, Li (Lijun) Jun Jiang, Tatsuo Itoh

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, we introduce a novel beam scanning in a single-rectangular-patch antenna realized by coupled modes. The design exhibits radiated beams that scan as a function of frequency but is different in its operation mechanism compared to a traditional leaky-wave antenna. The idea is to manipulate the phase difference between the fields at two radiating slots of the antenna to reform the beam. Metal vias are introduced to create two coupled half-mode cavities in the patch antenna. The mutual coupling between the two cavities makes the phase difference as a function of the operating frequency. The simulated beam scans …

Creating The Fleet Maker - Lessons Learned From The First Series Of Workshops On Maker Concepts For Active Duty Personnel, Karina Arcaute, Michel Albert Audette, Vukica Jovanovic, Anthony Dean, Dipankar Ghosh

STEMPS Faculty Publications

The US Navy has supported research related to the 3D printing or Additive Manufacturing area for more than 20 years. More recently, efforts like the Print the Fleet initiative and Marine Makers are exploring ways to design and create solutions to future problems with the possibility of reducing maintenance costs, increasing equipment readiness, and improving combat effectiveness. The Creating the Fleet Maker project is an effort supported by the Navy and Marine Corps Science, Technology, Engineering and Mathematics Education, Outreach and Workforce Program of the Office of Naval Research. It examines the concept of making in order to develop skills …

Assembling A Successful Industry-Sponsored Senior Capstone Program – Lessons Learned From A Startup Effort At A Liberal Arts University, Lori Houghtalen, Timothy Kennedy, Raymond Smith

Management Sciences

A medium-sized (around 4000 students) liberal arts university recently began a general engineering program. The program’s first graduating class was in May 2016, and the program obtained initial ABET accreditation in August 2017. Entering the 2015-2016 academic year, program faculty envisioned a capstone design experience that would engage student teams in a year-long, professional level design project sponsored by an industry client. The first two years of the capstone design program have been inarguably successful, and in this paper we identify and reflect on the keys to our success. The intention for writing this paper is to ensure the success …

Toward Controllable Hydraulic Coupling Of Joints In A Wearable Robot, Emma Treadway, Z. Gan, C. D. Remy, R. Brent Gillespie

Engineering Faculty Research

In this paper, we develop theoretical foundations for a new class of rehabilitation robot: body powered devices that route power between a user’s joints. By harvesting power from a healthy joint to assist an impaired joint, novel bimanual and self-assist therapies are enabled. This approach complements existing robotic therapies aimed at promoting recovery of motor function after neurological injury.

We employ hydraulic transmissions for routing power, or equivalently for coupling the motions of a user’s joints. Fluid power routed through flexible tubing imposes constraints within a limb or between homologous joints across the body. Variable transmissions allow constraints to be …

Modular Injection System And Sampling Template (M.I.S.S.T) Design Report, Froylan M. Aguirre

Computer Engineering

Digital systems are ubiquitous throughout modern life and their applications continue to grow. Thus system designers engineer and test modular systems to mitigate error rates. Smaller systems and their increasing importance in many applications demand the utmost reliability. Fault injection is the most common method used by researchers and engineers to test system reliability. However, most hardware fault injection implementations are ad hoc and only used to test a specific system or for specific tests. There is also software-implemented fault injection that adds overhead in the benchmark source code. The aim of this project is to develop a general use, …

Smart Speaker Integration With Letshub, Michael Thanh Diep

Computer Engineering

Imagine you are a property manager, and you are currently renting your property to tenants. These tenants, who pay rent continuously for use of the property often leave the burden of upkeep to the property owner (or property manager). If the tenant were to run into an issue with their rental (such as a broken sink, replacement of a faucet, leaking of the roof, … etc.) they would have to coordinate with the property manager, who would then in turn have to manage the logistics of a service contractor and the tenants availability. Eventually, after logistic juggling from the tenant, …