Engineering Commons^™

Methods For Estimating Vehicle Fuel Consumption In Urban Road Networks Using Geographical Attributes, Ryan G. Conrad

Civil and Environmental Engineering Master's Project Reports

This paper presents statistical techniques for estimating vehicle fuel consumption in urban road networks based on vehicle and geographical factors. A routing algorithm utilizing mapping data from OpenStreetMap and elevation data from the Shuttle Radar Topography Mission is presented and used to generate paths that minimize vehicle fuel consumption. The concept of a fuel consumption estimating function is proposed as an extension of the well-known distance-estimating functions that are widely used in logistics planning and research.

Statistical models are developed that estimate fuel consumption in three tested urban areas with vehicle weight, elevation and regional travel speed characteristics being the …

Sonomechanical Enhanced Sparging Techniques For Advanced Reactor Applications, Floren V. Rubio

Nuclear Engineering ETDs

The fluoride salt cooled high temperature reactor (FHR) is a Generation IV advanced reactor design that has potential to produce efficient, low carbon, and safe energy. But, there are significant engineering challenges that need to be addressed before the deployment of this reactor. One of the key challenges is tritium release mitigation and sequestration. Because the FHR utilizes a eutectic LiF-BeF2 (flibe) salt as a coolant, the coolant is a significant source of tritium.

High-power ultrasonics have been used in many industrial process streams such as food processing, metal production, chemical production, and pharmaceutical manufacturing. Techniques and concepts from these …

A Computational Fluid Dynamics Study On The Aerodynamic Performance Of Ram-Air Parachutes, Angelo A. Fonseca Pazmiño

Doctoral Dissertations and Master's Theses

The modeling of a ram-air parachute presents challenges in the prediction of the inflight geometry, as there is a strong interaction between the flow field and parachute structure. This thesis presents the development of a CAD design and CFD methodology to the simulation of ram-air parachutes in steady-state conditions. Starting from a 2D rib drawing, methods were developed to approximate the 3D geometry and efficiently model the parachute as a rigid and impermeable body. The use of distortions was implemented on a 2D, pseudo-2D, and 3D model to enhance their behavior during a real flight. The SST turbulence model was …

A Computational Analysis Of The Aerodynamics And Aeroacoustics Of Jets With Fluid Injection, Marco Coderoni

Doctoral Dissertations and Master's Theses

A detailed numerical analysis of fluidic injection as a tool to reduce noise emission is presented here. The noise reduction strategy, developed at the Pennsylvania State University, is based on injectors that blow air into the diverging section of the nozzle to emulate the effect of interior corrugation on the jet plume. The advantage is that the injection can be activated during takeoff and turned o_ during other phases of flight so that performance is not affected. Numerical simulations are performed on a military-style nozzle based on the GE F400-series engines, with a design Mach number of 1:65, for over-expanded …

Sensitivity Analyses Of Optimized Attitude Estimators Using Sensor Fusion Solutions For Low-Cost Mems Configurations, Ryan W. Hoffman

Doctoral Dissertations and Master's Theses

Since the 1990’s, there has been increased focus on creating navigation systems for small unmanned systems, particularly small unmanned aerial systems (SUAS). Due to size, weight, and cost restrictions, compared to larger more costly manned systems, navigation systems for SUAS have evolved to be quite different from the proven systems of the past. Today, there are many solutions for the problem of navigation for SUAS. The problem has now become choosing the most fitting navigation solution for a given application/mission. This is particularly true for evaluating solutions that are fundamentally different.

This research analyses the performance and sensitivity of four …

Improving Seaglider Efficiency: An Analysis Of Wing Shapes, Hull Morphologies, And Propulsion Methods, Christopher James Hockley

Doctoral Dissertations and Master's Theses

Autonomous underwater gliders are a family of autonomous underwater vehicles used for long-term observation of oceanic environments. These gliders leverage changes in buoyancy and the resulting vertical motion, to generate forward locomotion via hydrodynamic surfaces. In order to function for extended periods, these systems operate in a low-speed, low-drag regime. This research examines factors impacting the operational efficiencies of gliders, including morphological changes, configuration changes, and propulsion. An interesting question arises when considering the operational efficiencies of conventionally propelled systems at the operating speeds typical of gliders. Can a conventional propulsion system match the efficiency of an underwater glider buoyancy …

Determining The Location Of Runway Exits Using Airport Surface Detection Equipment, Christopher Bryan Clemmer

Doctoral Dissertations and Master's Theses

Airport surface detection equipment, such as ASDE-X, is used by thirty-five commercially operated airports throughout the United States. ASDE-X is responsible for the safe monitoring of aircraft movements as well as ground support vehicle operating on the airfield. Like most radar-based technologies, ASDE-X can report the position of any aircraft within a one second time interval. This data not only contains the geographic position, but also reports speed, heading, altitude, and aircraft specific characteristics. Using a quantitative approach, this research will use the data reported by ASDE-X to analyze current runway exit locations and develop an improved method of determining …

General Aviation Pilot Acceptance And Adoption Of Electronic Flight Bag Technology, Troy Ernest Techau

Doctoral Dissertations and Master's Theses

This research used an adapted version of the extended Unified Theory of Acceptance and Use of Technology (UTAUT2) to examine electronic flight bag (EFB) acceptance and adoption for general aviation (GA) pilots. EFBs are a common tool in almost all types of aviation and feature many useful capabilities such as the ability to display traffic, weather, and aviation charts. Despite their potential benefits, while some pilots choose to use EFBs in their flight operations, others continue to rely on traditional paper charts and reference materials. Determination of which factors explain differences in pilot acceptance and adoption of EFBs could influence …

Enhanced Coupling Strength Gratings For Outcouplers In Optical Waveguides, Ruo-Hua He

Electrical Engineering Theses and Dissertations

Gratings used for silicon photonic waveguides were demonstrated with outcoupling efficiency greater than 60% in a short grating length of 13 µm at a wavelength of 1550 nm. Due to problems of generating light from silicon, light has to be generated by either growing III-V material, wafer bonding III-V material to silicon, or externally generated light has to be coupled into and out of silicon photonic waveguides. Gratings have been used in semiconductor lasers to obtain single frequency operation. Some applications such as telecommunications require a narrow and single spectral line. And such single frequency lasers are typically distributed Bragg …

Measuring And Evaluating Safety Maturity Of Construction Contractors: Multicriteria Decision-Making Approach, Ali A. Karakhan, Sathyanarayanan Rajendran, John Gambatese, Chukwuma Nnaji

All Faculty Scholarship for the College of the Sciences

Evaluating the safety maturity of construction contractors before awarding the contract is an effective strategy that many owners have started to implement. Given the importance of workplace safety, awarding the contract to safer contractors can enhance project performance outcomes in terms of safety, quality, cost, and schedule. Safety maturity is one quality of a construction organization encompassing interdependent factors that can be used to evaluate expected safety performance. However, there is no formal decision-making framework available in literature that owners can use to evaluate contractor safety maturity. The present study aims to bridge this gap in safety knowledge by proposing …

Influence Of Blt Content On Phase Structure And Electrical Properties Of (1-X)Bt-Xblt Ceramic, N Thongmee, R Sumang, S Pojprapai, T Klaytae

Journal of Metals, Materials and Minerals

(1-x)BaTiO3-x(Bi3.25La0.75)Ti3O12; (1-x)BT-xBLT ceramics with x = 0-0.20 wt.% were prepared by a solid-state reaction method. The BaTiO3 (BT) and (Bi3.25La0.75)Ti3O12 (BLT) powders were, respectively, calcined at 1100°C and 750°C for 4 h. The (1-x)BT-xBLT samples were sintered between 1250°C and 1350°C. The structure exhibited a transformation from tetragonal to orthorhombic with increasing in BLT contents. The average grain size increased with increasing BLT contents. The maximum density and relative density about 6.19 ± 0.07 g/cm3and 99.3% were obtained for the composition of 0.95BT-0.05BLT. The Curie temperature (Tc) continuously decreased with increase in BLT contents. The dielectric constant showed a broad …

Atomic Diffusion In The Feal Alloy: A Research Via The Kinetic Monte Carlo Method, E V Manrique Castillo, F A. Reyes Navarro

Journal of Metals, Materials and Minerals

For a binary alloy with an ordered structure B2, we research the atomic migration by means of kinetic Monte Carlo simulations, where the atomic migration results from the exchange of positions between an atom and a vacancy in a rigid lattice. The atomistic kinetic model we used is based on the jump rate theory and the residence time algorithm, wherein we consider the pair interactions between neighbours up to the next-nearest neighbours. Likewise, we determine the ratio of the diffusion coefficients as a function of temperature and investigate the antiphase boundary mobility in the last stages of the ordering process. …

Starch Consolidation Of Porous Fused Silica Ceramics, K Kanlai, T Wasanapiarnpong, B Wiratphinthu, K Serivalsatit

Journal of Metals, Materials and Minerals

Starch consolidation is a forming technique, in which ceramic suspension is consolidated by gelatinization of starch under suitable temperature. This technique is promising for fabricating porous ceramics because starch can act as a binder as well as a pore former. In this study, porous fused silica ceramics were prepared by starch consolidation using glutinous rice flour as a gelling agent. The 29 vol% solid loading of fused silica slurries with the addition of glutinous rice flour were prepared. After mixing the slurries were poured into a plastic mold and kept in an oven at 75ºC for an hour. The green …

Synthesis Of Nanoparticulate Ti-Doped Zno By Solution Combustion Technique, O Jongprateep, P Deedit, R Puranasamriddhi, K Meesombad

Journal of Metals, Materials and Minerals

ZnO and TiO2 have been widely accepted as prominent photocatalysts. Enhancement of their photocatalytic activities can be achieved through particle refinement and doping. Solution combustion technique is a simple and cost-effective method capable of producing fine ceramic powders with homogeneous chemical compositions. It is, therefore, employed in this research project as the technique to synthesize nanometer-sized Ti-doped ZnO powders. The research also aimed at examining a relationship among doping contents, chemical composition, particle sizes, and photocatalytic performance of the synthesized powder. Compositional analysis revealed that the solubility limit of Ti in zinc oxide was within the range of 3 at% …

Flip-Chip (Fc) And Fine-Pitch-Ball-Grid-Array (Fpbga) Underfills For Application In Aerospace Electronics—Brief Review, Ephraim Suhir, Reza Ghaffarian

Mechanical and Materials Engineering Faculty Publications and Presentations

In this review, some major aspects of the current underfill technologies for flip-chip (FC) and fine-pitch-ball-grid-array (FPBGA), including chip-size packaging (CSP), are addressed, with an emphasis on applications, such as aerospace electronics, for which high reliability level is imperative. The following aspects of the FC and FPGGA technologies are considered: attributes of the FC and FPBGA structures and technologies; underfill-induced stresses; the roles of the glass transition temperature (T_g) of the underfill materials; some major attributes of the lead-free solder systems with underfill; reliability-related issues; thermal fatigue of the underfilled solder joints; warpage-related issues; attributes of accelerated life …

Multiuser Coding And Signal Processing In A Low Power Sensor Network, Dongqi Lai

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Backscatter communication system is a wireless communication system that is used by both academic community and industry circles in recent years. This communication system only requires ultra-low power usage and simple design of the sensors. This project is using backscatter communication system to transmit data with backscatter tags. The method we used is semi-passive backscatter communication. This project focuses on transmitting signals with multiple sensors so there is a problem about distinguishing the signal reflected by different nodes. We modulated the transmitting digital signal with Walsh function to solve the problem of separating the signals between different nodes. By using …

Implementation Of Vision Processing Tasks On A Smart Camera Platform Using Neighborhood Processors, Dingyi Hong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Two applications of vision processing on a smart camera platform using neighborhood processors are presented. A smart camera application of real-time trajectory calculation for tracking objects and predicting their path of motion by using a single intelligent camera or a dual camera system are designed, simulated and implemented. Another application of object recognition with a key points algorithm for detecting simple shaped objects and locating the camera position within a 3-D coordinate system via imaging by using artificial neural network is applied to provide quick and accurate processing on a neighborhood-level parallel processor or other limited vision chip. For all …

Surgical And Medical Applications Of Drones: A Comprehensive Review, James C. Rosser, Vudatha Vignesh, Brent A. Terwilliger, Brett C. Parker

Publications

Background: Drones have the ability to gather real time data cost effectively, to deliver payloads and have initiated the rapid evolution of many industrial, commercial, and recreational applications. Unfortunately, there has been a slower expansion in the field of medicine. This article provides a comprehensive review of current and future drone applications in medicine, in hopes of empowering and inspiring more aggressive investigation. Database: A literature search was performed by EBSCO (Elton B. Stephens Company) Discovery Service, searching the phrases "drones," "UAV," "unmanned aerial vehicles," "UAS," and "unmanned aerial systems." A second search was used to identify sources that contained …

Surgical And Medical Applications Of Drones: A Comprehensive Review, Brent Terwilliger, James C. Rosser Jr., Vudatha Vignesh, Brett C. Parker

Publications

Drones have the ability to gather real time data cost effectively, to deliver payloads and have initiated the rapid evolution of many industrial, commercial, and recreational applications. Unfortunately, there has been a slower expansion in the field of medicine. This article provides a comprehensive review of current and future drone applications in medicine, in hopes of empowering and inspiring more aggressive investigation.

Towards Domain-Specific Modeling Methodology For Avionic Safety-Critical Systems, Emanuel S. Grant

Computer Science Faculty Publications

The use of domain-specific modeling languages and associated methodologies, provide support in application domain where the safe and reliable operations of the systems are of paramount importance to the users and organizations, and wherein the domains are well understood and documented. One such area of domain-specific modeling application is in the field of avionic systems. For software systems to be used onboard aircrafts they must be certified, and as such certification protocols have been established for developing these safety-critical systems. These established protocols are usually represented as textual documents and inherently are difficult to apply directly in software development environments. …

Characteristics And Applications Of Biochars Derived From Wastewater Solids, Zhongzhe Liu, Simcha L. Singer, Yiran Tong, Lee Kimball, Erik Anderson, Matthew Hughes, Daniel Zitomer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Pyrolysis is a thermochemical decomposition process that can be used to generate pyrolysis gas (py-gas), bio-oil, and biochar as well as energy from biomass. Biomass from agricultural waste and other plant-based materials has been the predominant pyrolysis research focus. Water resource recovery facilities also produce biomass, referred to as wastewater solids, that could be a viable pyrolysis feedstock. Water resource recovery facilities are central collection and production sites for wastewater solids. While the utilization of biochar from a variety of biomass types has been extensively studied, the utilization of wastewater biochars has not been reviewed in detail. This review compares …

Boro-Austempering Treatment Of Ductile Cast Irons, Fábio Edson Mariani, Carolina Soares, Amadeu Lombardi Neto, George Totten, Luiz Carlos Casteletti

Mechanical and Materials Engineering Faculty Publications and Presentations

Samples of ductile cast irons alloyed with Cu, Cu-Ni and Cu-Ni-Mo were austempered, borided and boro-austempered and characterized for hardness and micro-adhesive wear behavior. The kinetics of layer formation was also studied. The boriding method used was molten borax bath, in periods of 2 and 4 hours at temperatures of 850, 900 and 950º C. The direct austempering treatment was performed immediately following the boriding treatment (from 850, 900 and 950º C) using molten salt baths at temperatures of 240, 300 and 360º C for 4 hours (boro-austempering treatment). For comparative purposes, the conventional austempering treatment was also conducted. Optical …

Compartmentalization Of Dna-Based Molecular Computing Elements Using Lipid Bilayers, Aurora Fabry-Wood

Biomedical Engineering ETDs

This dissertation will present a progression from the detection of double-stranded DNA using a combination of toehold-mediated strand displacement and DNAzyme reactions in dilute saline solutions, to the generation of separate compartments to allow standardization of DNA computing elements, by protecting from complementary strands. In well-mixed solutions complementary regions cause spurious interactions. Importantly, these compartments also provide protection from nucleases. Along the way we will also explore the use of silica microsphere supported lipid bilayers to run compartmentalized DNA reactions on a fluid surface and the design of a molecule capable of DNA-based transmembrane signal transduction.

An Evaluation Of Unmanned Aerial System Multispectral And Thermal Infrared Data As Information For Agricultural Crop And Irrigation Management, Mitch Maguire

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Spatial irrigation management has been steadily advancing over the last several years. A current issue with managing irrigation spatially on sub-field scale is the inability to readily collect the spatial field data necessary to properly manage irrigation. Multispectral and thermal infrared imagery used in informing irrigation management decisions was previously collected by satellite and manned aircraft remote sensing platforms. These remote sensing platforms pose issues concerning economic feasibility, revisit intervals, and weather factors that inhibit the collection of data. Recent developments in unmanned aerial systems, which provide an additional means of collecting multispectral and thermal infrared data, have the potential …

Software For Peak Finding And Elemental Composition Assignment For Glycosaminoglycan Tandem Mass Spectra, John D. Hogan, Joshua A. Klein, Jiandong Wu, Pradeep Chopra, Geert Jan Boons, Luis Carvalho, Cheng Lin, Joseph Zaia

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glycosaminoglycans (GAGs) Covalently Linked to Proteoglycans (PGs) Are Characterized by Repeating Disaccharide Units and Variable Sulfation Patterns Along the Chain. GAG Length and Sulfation Patterns Impact Disease Etiology, Cellular Signaling, and Structural Support for Cells. We and Others Have Demonstrated the Usefulness of Tandem Mass Spectrometry (MS 2 ) for Assigning the Structures of GAG Saccharides; However, Manual Interpretation of Tandem Mass Spectra is Time-Consuming, So Computational Methods Must Be Employed. in the Proteomics Domain, the Identification of Monoisotopic Peaks and Charge States Relies on Algorithms that Use Averagine, or the Average Building Block of the Compound Class Being Analyzed. …

Significant Improvement In Tio₂ Photocatalytic Activity Through Controllable Zro₂ Deposition, Xiaofeng Wang, Rajankumar L. Patel, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

ZrO₂ was deposited on anatase TiO₂ nanoparticles using 5-80 cycles of atomic layer deposition (ALD). The photocatalytic activity of all samples was evaluated based on the degradation of methylene blue (MB) solution under UV light. The TiO₂ sample with 45 cycles of ZrO₂ deposition (45c-Zr/TiO₂, 1.1 wt% ZrO₂) was proved to be the most efficient catalyst with a degradation kinetic constant 10 times larger than that of the pure TiO₂ sample. All samples were characterized using inductively coupled plasma atomic emission spectroscopy (ICP-AES), nitrogen adsorption-desorption, X-ray diffraction (XRD), transmission electron microscopy …

Numerical Modeling Of The Effects Of Land Use Change And Irrigation On Streamflow Depletion Of Frenchman Creek, Nebraska, Moussa Guira

Department of Earth and Atmospheric Sciences: Dissertations, Theses, and Student Research

A three-dimensional Control Volume Finite Difference-based numerical groundwater flow model was constructed to assess the effects of agricultural irrigation and land use change on streamflow depletion. The study area is Frenchman Creek basin located in southwestern corner of the State of Nebraska, USA. This area was subject to an increased proliferation of groundwater abstraction for agricultural purposes since industrial revolution. It has also been subject to land use change from native rangeland to dry and irrigated cropland. The groundwater flow model was spatially discretized using Voronoi cells in unstructured grid built with the USGS MODFLOW-6. Temporal discretization defined 151 time …

Robust Assignment Of Customer Orders With Uncertain Configurations In A Production Network For Aircraft Manufacturing, Jens Buergin, Philippe Blaettchen, Juri Kronenbitter, Katharina Molzahn, Yannick Schweizer, Caroline Strunz, Manuel Almagro, Frank Bitte, Stephan Ruehr, Marcello Urgo, Gisela Lanza

Research Collection Lee Kong Chian School Of Business

Production of multi-variant products in a network requires the assignment of customer orders to locations and periods. This is a highly complex planning task, as requirements of procurement, production, distribution, and sales have to be considered. Providing customers with the flexibility of configuring their ordered products after order assignment further increases the complexity of the planning task by taking uncertainty into account. Therefore, a robust optimisation model, using scenarios representing potential customer-specific order configurations, is introduced. By providing enough flexibility to handle maximum work overload caused by the potential order configurations at locations, a robust assignment of orders can be …

Uv-Based Advanced Oxidation Of P22 Bacteriophange And E. Coli Bacteria, Vincent Martino

Master's Theses (2009 -)

Two novel, sustainable UV-LED advanced oxidation processes (AOPs) were evaluated for their ability to improve inactivation efficacy of P22 bacteriophage and E. coli bacteria. The first objective of this research was to determine the treatment efficacy of P22 bacteriophage and E. coli bacteria using UV-LED at wavelengths of 255, 265, and 285 nm. The UV-LED system demonstrated high inactivation potential for both contaminants at all wavelengths, suggesting it could be a potential alternative to typical low-pressure and medium-pressure mercury-based UV systems. Increased inactivation of both microorganisms was observed with decreasing wavelength (255>265>285 nm). As the peak UV absorbance …

A Biomechanical Simulation Of Musculoskeletal Kinematics During Ambulation, Alex Thomas

Master's Theses (2009 -)

The purpose of this study was to validate a 3D musculoskeletal model in OpenSim and assess OpenSim’s ability to determine muscle-length variation during ambulation. An 18 camera motion capture system was used to analyze 20 healthy individuals between the ages of 18 and 35. Following data collection, the data was processed through OpenSim and Visual3D. The kinematic output processed through the OpenSim model was then compared to the kinematic output of the validated Visual3D model to validate the OpenSim model. Muscle fiber length data obtained from the same experimental data was compared to control data to assess OpenSim’s muscle analysis …