Engineering Commons^™

An Investigation Into Remote Sensing Techniques For Describing Hydraulic Roughness, Smriti Chaulagain

Civil Engineering ETDs

Riparian vegetation, an indicator of healthy river system, increases the hydraulic roughness and reduces the conveyance capacity of a channel. Vegetation provides dominant drag force influencing the velocity distribution, turbulence intensity and water depth. Thus, the study of hydraulic roughness due to vegetation is essential to determine the characteristics of flow. Traditionally, a constant Manning’s roughness value is assigned based on land cover maps and that does not adequately account for vegetation. The roughness due to vegetation are determined on the basis of its parameters like height, density, LAI and flexibility. Remote sensing data (LiDAR, aerial photos or satellite images) …

Emulating Balance Control Observed In Human Test Subjects With A Neural Network, Wade William Hilts

Dissertations and Theses

Human balance control is a complex feedback system that must be adaptable and robust in an infinitely varying external environment. It is probable that there are many concurrent control loops occurring in the central nervous system that achieve stability for a variety of postural perturbations. Though many engineering models of human balance control have been tested, no models of how these controllers might operate within the nervous system have yet been developed. We have focused on building a model of a proprioceptive feedback loop with simulated neurons. The proprioceptive referenced portion of human balance control has been successfully modeled by …

Inter-Comparison Of Thermal Measurements Using Ground-Based Sensors, Uav Thermal Cameras, And Eddy Covariance Radiometers, Alfonso F. Torres-Rua, Héctor Nieto, Christopher Parry, Manal Elarab, Wesley Collatz, Calvin Coopmans, Lynn Mckee, Mac Mckee, William P. Kustas

Civil and Environmental Engineering Faculty Publications

With the increasing availability of thermal proximity sensors, UAV-borne cameras, and eddy covariance radiometers there may be an assumption that information produced by these sensors is interchangeable or compatible. This assumption is often held for estimation of agricultural parameters such as canopy and soil temperature, energy balance components, and evapotranspiration. Nevertheless, environmental conditions, calibration, and ground settings may affect the relationship between measurements from each of these thermal sensors. This work presents a comparison between proximity infrared radiometer (IRT) sensors, microbolometer thermal cameras used in UAVs, and thermal radiometers used in eddy covariance towers in an agricultural setting. The information …

Evaluation Of Effectiveness Of Streambank Stabilization Practices And Flood Impact On Cedar River, Nebraska, Naisargi N. Dave

Department of Environmental Engineering: Theses and Other Student Research

Stream restoration has been a major environmental objective for preserving biodiversity, reducing loss of valuable cropland and improving water quality. The impact and efficiency of streambank stabilization practices has been simulated using erosion-prediction models; however, evaluation of the erosion-control practices to measure their efficiency is often neglected. This project monitored changes in fluvial geomorphology on the Cedar River in Nebraska and quantified the effectiveness of 18 sites with streambank stabilization practices. A flood event in 2010 due to dam failure acted as a major parameter in measuring the efficiency of the erosion control practices. The methodology included aerial imagery to …

Conference Program, A.K. Vasudevan, Henry Holroyd, Ronald Latanision

Stress-Assisted Corrosion Damage V

No abstract provided.

An Ensemble Stacked Convolutional Neural Network Model For Environmental Event Sound Recognition, Shaobo Li, Yong Yao, Jie Hu, Guokai Liu, Xuemei Yao, Jianjun Hu

Faculty Publications

Convolutional neural networks (CNNs) with log-mel audio representation and CNN-based end-to-end learning have both been used for environmental event sound recognition (ESC). However, log-mel features can be complemented by features learned from the raw audio waveform with an effective fusion method. In this paper, we first propose a novel stacked CNN model with multiple convolutional layers of decreasing filter sizes to improve the performance of CNN models with either log-mel feature input or raw waveform input. These two models are then combined using the Dempster–Shafer (DS) evidence theory to build the ensemble DS-CNN model for ESC. Our experiments over three …

Characterizing Patterns In E. Coli Levels In Rio Grande River Water And Riverbed Sediments Near Albuquerque, Nm, James Fluke

Civil Engineering ETDs

In this work I examined how Fecal indicator Bacteria (FIB) behave in a large environmental system (Rio Grande near Albuquerque, ~60 km distance). I addressed the questions: How do FIB levels in river water and riverbed sediments of this reach change with distance along the river and throughout one year?

I conducted year-round river water and sediment sampling for concentration of E. coli bacteria, a persistent contaminant in the area. I found that over the year, E. coli loading in river water increased along the 60 km reach and E. coli in the sediments mainly increased near the Albuquerque urban …

Capacitive Pcb Security For Active Tamper And Alteration Detection, Casey Petersen

Electrical and Computer Engineering ETDs

The purpose of the research presented is to establish the viability of using capacitive based sensors for the purpose of hardware security at the Printed Circuit Board (PCB) level. Capacitive sensors are traditionally used to sense changes to the areas surrounding the sensing pads in applications such as sensing proximity, position, humidity, fluid levels and much more.

The specific sensor used for this research is an inductor-capacitor (LC) based Capacitance-to-Digital Converter. This configuration is virtually immune to EM noise because it is a tank circuit and therefore filters out the noise which, in the past, caused reliability issues with these …

Pulse Sharpening Circuit For Explosive Emission Cathode Driver, Nicholas D. Kallas

Electrical and Computer Engineering ETDs

Explosive field emission cathodes (EEC), used for the generation of relativistic electron beams, require short rise-time high-voltage pulses in order to minimize the extraction of off-energy electrons. To this end, a rise-time sharpening circuit has been developed at the Los Alamos National Laboratory (LANL). The circuit consists of a 7 nF water-filled peaking capacitor with an integrated self-breakdown switch designed to operate up to -300 kV. This unit is intended to reduce the rise-time of a 4-stage Type-E PFN Marx Generator that will be used to study operational characteristics of velvet cathodes. Simulations of the peaking circuit show a reduction …

Pore-Resolving Simulation Of Char Particle Gasification Using Micro-Ct, Greg Hingwah Fong, Scott Jorgensen, Simcha L. Singer

Mechanical Engineering Faculty Research and Publications

Understanding the interaction between transport, reaction and morphology at the scale of individual char particles is important for optimizing solid fuel gasification and combustion processes. However, most particle-scale models treat porous char particles as an effective porous continuum, even though the presence of large, irregular macropores, voids and fractures render such upscaled treatments mathematically invalid, and the models non-predictive. A new modeling framework is therefore proposed to elucidate the impact of morphology on char particle gasification and combustion. A pore-resolving, transient, three-dimensional simulation for gasification of a realistic coal char particle is developed based on X-ray micro-computed tomography (micro-CT). The …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Students Participate in Study Abroad in Germany

Metal Reactivity In Laboratory Burned Wood From A Watershed Affected By Wildfires, Asifur Rahman

Civil Engineering ETDs

Massive amounts of wood ash are deposited into nearby streams as a result of runoff from storm events after increasing frequency of wildfire events that negatively affect water quality. Ash and debris from burned vegetation can alter the pH, turbidity and dissolved oxygen (DO) in water and can release heavy metals, organic matter, and nutrients. We investigated interfacial processes affecting metal mobility in wood ash burned under laboratory-controlled conditions using aqueous chemistry, microscopy and spectroscopy analyses. Wood was collected from the Valles Caldera National Preserve in New Mexico which has experienced two wildfires since 2011 that have caused devastating effects. …

Data-Driven Uncertainty Quantification Interpretation With High Density Regions, Matthew Gregor Peterson

Computer Science ETDs

In a time when data is being constantly generated by phones, vehicles, sensor net- works, social media, etc. detecting anomalies with in the data can be very crucial. In cases where we know little prior knowledge about the data, it becomes difficult to extract uncertainty about our results. In this thesis, we will propose a framework in which we can extract uncertainty distributions from data-driven modeling prob- lems. We will show some concrete examples of how to apply framework and provide some insight into what the uncertainty distributions are telling us using High Density Regions (HDRs).

Me2b

SIGNED: The Magazine of The Hong Kong Design Institute

Fixing the internet's biggest flaw

Seismic Performance And Retrofit Evaluation Of Hollow-Core Composite Bridge Columns, Mohanad M. Abdulazeez, Ahmed Gheni, Nicholas Colbert, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the seismic behavior of large-scale hollow-core fiber-reinforced polymerconcrete-steel (HC-FCS) bridge column. The HC-FCS column consists of a concrete wall sandwiched between an outer fiber-reinforced polymer (FRP) tube and an inner thin-walled steel tube. The width-to-diameter ratio for the steel tube was 147. The column had an outer diameter of 24 inches and a height-to-diameter ratio of 4.0. The steel tube was embedded into reinforced concrete footing with an embedded length of 1.25 times the steel tube diameter, while the FRP tube only confined the concrete wall thickness and curtail at the top of the footing level. The …

Intelligent Computational Transportation, Yuming Zhang

Electrical and Computer Engineering ETDs

Transportation is commonplace around our world. Numerous researchers dedicate great efforts to vast transportation research topics. The purpose of this dissertation is to investigate and address a couple of transportation problems with respect to geographic discretization, pavement surface automatic examination, and traffic ow simulation, using advanced computational technologies. Many applications require a discretized 2D geographic map such that local information can be accessed efficiently. For example, map matching, which aligns a sequence of observed positions to a real-world road network, needs to find all the nearby road segments to the individual positions. To this end, the map is discretized by …

Properties Of Torrefied U.S. Waste Blends, Zhou Xu, Stas Zinchik, Shreyas Kolapkar, Ezra Bar Ziv, Ted Hansen, Dennis Conn, Armando G. Mcdonald

Michigan Tech Publications, Part 1

Power generation facilities in the U.S. are looking for a potential renewable fuel that is sustainable, low-cost, complies with environmental regulation standards and is a drop-in fuel in the existing infrastructure. Although torrefied woody biomass, meets most of these requirements, its high cost, due to the use of woody biomass, prevented its commercialization. Industrial waste blends, which are also mostly renewable, are suitable feedstock for torrefaction, and can be an economically viable solution, thus may prolong the life of some of the existing coal power plants in the U.S. This paper focuses on the torrefaction dynamics of paper fiber-plastic waste …

Selected Applications Of Silicon Nanopillar Arrays., Behnam Kheyraddini Mousavi

Electrical and Computer Engineering ETDs

Interaction of optical waves with nanostructures made of various material systems has been the subject of intensive research for many years. These researches have been mainly driven by the need to make smaller optical devices and exploiting the functionalities offered by light-matter interaction in nanoscale. Majority of the nanostructures are fabricated using electron beam (e-beam) lithography that is slow and expensive. As such alternative methods have been developed to enable nanoscale fabrication faster and less expensive. Among these interferometric lithography (IL) is a relatively simple method for quick fabrication of nanostructures. As IL method generates periodic patterns, exploring the potential …

Huron-To-Erie Water Quality Data Platform, Lanyu Xu, Carol J. Miller, James Olson, Michael Beaulac

Civil and Environmental Engineering Faculty Research Publications

To address the challenges of environmental degradation, creation of a sustainable urban environment, and increased public engagement and awareness, a mass-oriented, user-friendly and cloud-based data platform has been developed and deployed to provide integrative water quality data in one of the most critical urban corridors of the Laurentian Great Lakes system. In this paper, we describe the data platform developed for the watershed and connecting channels between Lake Huron and Lake Erie, including the St. Clair River, Lake St. Chair, and the Detroit River. This data platform greatly facilitates the access of data across data providers and agencies. Several example …

Coreless And Conventional Axial Flux Permanent Magnet Motors For Solar Cars, Narges Taran, Vandana Rallabandi, Greg Heins, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Axial flux permanent magnet (AFPM) motors are suitable options for solar-powered vehicles due to their compact structure and high torque density. Furthermore, certain types of AFPM machines may be configured without stator cores, which eliminates associated losses and cogging torque and simplifies the manufacturing and assembly. This paper examines two machine designs for use in the solar-powered vehicle of the challenger class-a single rotor, single stator conventional AFPM machine, and a coreless AFPM machine with multiple stator and rotor disks. The response surface methodology (RSM) is utilized for the systematic comparison of the conventional and coreless topologies and to select …

High-Performance Testbed For Vision-Aided Autonomous Navigation For Quadrotor Uavs In Cluttered Environments, Shakeeb Ahmad

Electrical and Computer Engineering ETDs

This thesis presents the development of an aerial robotic testbed based on Robot Operating System (ROS). The purpose of this high-performance testbed is to develop a system capable of performing robust navigation tasks using vision tools such as a stereo camera. While ensuring the computation of robot odometery, the system is also capable of sensing the environment using the same stereo camera. Hence, all the navigation tasks are performed using a stereo camera and an inertial measurement unit (IMU) as the main sensor suite. ROS is used as a framework for software integration due to its capabilities to provide efficient …

Correction: Orbital Angular Momentum Generation And Detection By Geometric-Phase Based Metasurfaces [Appl. Sci., 8, (2018), (362)] Doi:10.3390/App8030362, Menglin L.N. Chen, Li (Lijun) Jun Jiang, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

We, the authors, wish to make the following corrections to our paper [1]. We found that the literature we listed on page 2 has a mistake: "Afterwards, many other devices for OAM generation have been proposed, such as the cylindrical lens in 1993 [30], spiral phase plates (SPPs) in 1994 [31], q plates in 2006 [32]." We would like to give credit to the first phase rotor filter [2] and remove the year for the designs. Thus, the statement would be changed to: "In 1992, a phase rotor filter was devised to introduce the azimuthal phase term [30]. Afterwards, many …

Microwave Characterization Of Printable Dielectric Inks Using Additive Manufacturing Methods, Seth York

USF Tampa Graduate Theses and Dissertations

Two methods of dielectric characterization are presented that offer quick and cost-effective solutions for screening complex dielectric material properties. Through Direct-Print Additive Manufacturing (DPAM) methods, a dielectric material of choice is dispensed into a capacitor structure and characterized through 1-port s-parameter measurements. The presented methods use fixtures that are modeled and validated through simulation then implemented in practice. Advanced simulations are performed to gain insights which are used to optimize the dielectric characterization performance of the fixtures. Additional investigations are performed which investigate the durability of the fixture and material within by exposing the combination to rough environmental conditions for …

Bioengineering Of An In Vitro Microphysiological Human Alveolar Model, Ayesha Arefin

Nanoscience and Microsystems ETDs

Drugs tested on animal models do not always produce the same results in humans; a reliable in vitro lung model can bridge the divide between the two. Because the alveolus is a target for several drugs, an alveolar model can be a platform for both designing drugs and studying lung diseases. A model should allow for gas exchange, growth of primary alveolar epithelial cells, extracellular matrix production, and have similar mechanical properties to alveoli, creating an environment conducive to normal metabolic activity and cellular responses. Existing artificial alveolar models that use polymeric membranes to sustain lung cells are limited by …

Compact Hardware Implementation Of A Sha-3 Core For Wireless Body Sensor Networks, Yi Yang, Debiao He, Neeraj Kumar, Sherali Zeadally

Information Science Faculty Publications

One of the most important Internet of Things applications is the wireless body sensor network (WBSN), which can provide universal health care, disease prevention, and control. Due to large deployments of small scale smart sensors in WBSNs, security, and privacy guarantees (e.g., security and safety-critical data, sensitive private information) are becoming a challenging issue because these sensor nodes communicate using an open channel, i.e., Internet. We implement data integrity (to resist against malicious tampering) using the secure hash algorithm 3 (SHA-3) when smart sensors in WBSNs communicate with each other using the Internet. Due to the limited resources (i.e., storage, …

Catalysts For Nitrogen Reduction To Ammonia, Royce D. Duda, Julie N. Renner

Faculty Scholarship

The production of synthetic ammonia remains dependent on the energy- and capital-intensive Haber-Bosch process. Extensive research in molecular catalysis has demonstrated ammonia production from dinitrogen, albeit at low production rates. Mechanistic understanding of dinitrogen reduction to ammonia continues to be delineated through study of molecular catalyst structure, as well as through understanding the naturally occurring nitrogenase enzyme. The transition to Haber-Bosch alternatives through robust, heterogeneous catalyst surfaces remains an unsolved research challenge. Catalysts for electrochemical reduction of dinitrogen to ammonia are a specific focus of research, due to the potential to compete with the Haber-Bosch process and reduce associated carbon …

Cross Photoreaction Of Glyoxylic And Pyruvic Acids In Model Aqueous Aerosol, Sha-Sha Xia, Alexis J. Eugene, Marcelo I. Guzman

Chemistry Faculty Publications

Aerosols of variable composition, size, and shape are associated with public health concerns as well as with light-particle interactions that play a role in the energy balance of the atmosphere. Photochemical reactions of 2-oxocarboxylic acids in the aqueous phase are now known to contribute to the total secondary organic aerosol (SOA) budget. This work explores the cross reaction of glyoxylic acid (GA) and pyruvic acid (PA) in water, the two most abundant 2-oxocarboxylic acids in the atmosphere, under solar irradiation and dark thermal aging steps. During irradiation, PA and GA are excited and initiate proton-coupled electron transfer or hydrogen abstraction …

Synchronization In An Externally Driven Mechanical Oscillators Experiment, Sumit Chhabria

Electrical and Computer Engineering ETDs

Our experimental system studies the effects of externally controlled oscillation on directly and indirectly driven system of metronomes. This is analogous to many practical systems such as pacemaker effect on heart cells, the external light effect on the suprachiasmatic nucleus in the brain. Here the pacemaker can be compared to an external driving force to the system where the heart cells are our oscillating system. Also, in the suprachiasmatic nucleus cell system, the external input is external light which synchronizes the cell. We explore the synchronization of directly and indirectly driven metronomes due to externally provided forcing.

We designed an …

Portable Electronic Devices On The Flight Deck, Irena Wentzel, John E. Deaton

International Journal of Aviation, Aeronautics, and Aerospace

The emergence of portable electronic devices (PEDs) has provided people with most anything at the touch of a button but has caused many safety-related distractions at the same time. A somewhat addictive reliance on PEDs, mostly smart phones, seems to exist even during times that would prohibit their use. Operation of PEDs during these times has led to some fatal accidents in all areas of transportation. The urgency of this safety issue now means the National Transportation Safety Board (NTSB) studies what role a PED may have played in every new accident investigation. Examining the use of PEDs on the …

Modification And Assessment Of A Residential Summer Program For High School Women, Aimee Cloutier, Guo Zheng Yew, Siddhartha Gupta, Kalpani Dissanayake, Paula Monaco, Susan Mengel, Audra Morse

Journal of Pre-College Engineering Education Research (J-PEER)

The importance of reducing the gender gap in engineering programs by recruiting and retaining female students is well recognized. Although women hold roughly half of all jobs in the United States, only 24% of STEM jobs are occupied by women. The problem is even more pronounced for engineering, where women held about 12% of jobs as of 2013 (Corbett & Hill, 2015). Consequently, interactive, hands-on outreach programs are a common tool used by universities to encourage interest in engineering from K–12 students. Engineering—Get Into Real Learning (E-GIRL) is a week-long, residential summer program offered by Texas Tech University for female …