Engineering Commons^™

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Felix Hamza-Lup Receives Erasmus+ Grant

Light Intensity-Induced Phase Transitions In Graphene Oxide Doped Polyvinylidene Fluoride, Yuri A. Barnakov, Omari Paul, Akinwunmi Joaquim, April Falconer, Richard Mu, Vadim Y. Barnakov, Dmitriy Dikin, Vitalii P. Petranovskii, Andre Zavalin, Akira Ueda, Frances Williams

Electrical and Computer Engineering Faculty Research

The coupling of light with low-frequency functionalities of dielectrics and liquid crystals and an ability to turn “on” and “off” the pyro-, piezo-, or ferro- electric properties of materials on demand by optical means leads to fascinating science and device applications. Moreover, to achieve all-optical control in nano-circuits, the coupling of the light with mechanical degrees of freedom is highly desirable and has been elusive until recently. In this work, we report on the light intensity-induced structural phase transitions in graphene oxide doped piezoelectric polyvinylidene fluoride (PVDF) film observed by micro-Raman spectroscopy. Increasing the laser power results in a steady …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Mechanical Faculty Among Focus on Excellence Award Recipients

Preparation Of Insulating Material Based On Rice Straw And Inexpensive Polymers For Different Roofs, Fatma Zakaria, M. A. Radwan, M. A. Sadek, Hany A. Elazab Dr

Chemical Engineering

Fossil fuel saving is part of the 21th century goal. One of the largest sectors that consumes energy is the building sector since it consumes 40% of the total energy in Europe through heating and cooling. Thus, the need of minimizing the energy consumption played an im-portant role in the development of building insulation materials. Selection of a proper material for building insulation differs according to the building surrounding climate and the properties required in the material. Building climate determines the insulating material location whether its internal or external while properties can differ ac-cording to many parameters that affect the …

Energy Science And Engineering: Looking Ahead, Yun Hang Hu

Michigan Tech Publications, Part 1

No abstract provided.

Stream Centric Methods For Determining Groundwater Contributions In Karst Mountain Watersheds, Bethany T. Neilson, Hyrum Tennant, Trinity L. Stout, Matthew P. Miller, Rachel S. Gabor, Yusuf Jameel, Mallory Millington, Andrew Gelderloos, Gabriel J. Bowen, Paul D. Brooks

Civil and Environmental Engineering Faculty Publications

Climate change influences on mountain hydrology are uncertain but likely to be mediated by variability in subsurface hydrologic residence times and flow paths. The heterogeneity of karst aquifers adds complexity in assessing the resiliency of these water sources to perturbation, suggesting a clear need to quantify contributions from and losses to these aquifers. Here we develop a stream centric method that combines mass and flow balances to quantify net and gross gains and losses at different spatial scales. We then extend these methods to differentiate between karst conduit and matrix contributions from the aquifer. In the Logan River watershed in …

Introducing The Boise State Bangla Handwriting Dataset And An Efficient Offline Recognizer Of Isolated Bangla Characters, Nishatul Majid, Elisa H. Barney Smith

Electrical and Computer Engineering Faculty Publications and Presentations

This introduces the Boise State Bangla Handwriting Dataset, a publicly accessible offline handwriting dataset of Bangla script. This can be found at https://scholarworks.boisestate.edu/saipl/1/

A basic character recognition method is presented where the features are extracted based on zonal pixel counts, structural strokes and grid points with U-SURF descriptors modeled with bag of features.

Benchmarking with this approach on 3 other publicly available Bangla datasets is reported. The highest classification accuracy obtained with an SVM classifier based on a cubic kernel is 96.8%.

Insulating Material Based On Shredded Used Tires And Inexpensive Polymers For Different Roofs, Hany A. Elazab Dr

Chemical Engineering

Thermal insulation is the ability of the material to prevent or reduce the heat transfer through the insulating material or between thermally contacted objectives. The increasing of the greenhouse effect leads to a continuous rising of the temperature especially in the summer, thus, there is a continuous research that aims to find more effective and environmental friendly insulation materials. Nowadays, a great number of proportions from polyurethane foam are produced every year in order to be used as an insulating material. Polyurethane foam shows an effective heat insulation results, but the price of the polyurethane is getting more expensive each …

Indirect Imaging Using Heterodyne Remote Digital Holography, Muralidhar Madabhushi Balaji

Electrical Engineering Theses and Dissertations

Conventional line-of-sight imaging techniques rely on detecting light paths bouncing from the object and reaching directly to the detector. Absence of any such direct light paths from object to detector results in a failure to recover any useful information using conventional techniques. The absence of direct light paths from object to detector can be observed in several real-world scenarios such as looking around a corner, imaging through turbid media, imaging through tissue etc.

The focus of this thesis is pertaining to the problem of looking around corners (or) imaging object hidden from line of sight at macroscopic scales. This thesis …

A Hands-On Robotics Concentration Curricula In Engineering Technology Programs, Andy S. Zhang, Angran Xiao, Yu Wang, Farrukh Zia, Muhammad Ummy

Publications and Research

This paper discusses the creation of a robotic concentration with four courses to meet the industry demands for qualified graduates in product design and services. Advances in computer technology and electronics have created a new field called mechatronics. Nowadays almost all high tech products are mechatronics in nature. Products such as automotive subsystems (such as anti-lock braking systems and automatic steering systems), medical devices, environmental monitoring systems, service and surgical robots are all mechatronic products. The robotic concentration focus on one of the most popular and visible area of mechatronics: robotics. The creation of the four courses: Embedded Systems Fundamentals, …

Quadrotor Swarm Arena (Quasar) Development Of A Swarm Control Testbed, Shane T. Stebler, William Mackunis

Beyond: Undergraduate Research Journal

Swarm control systems are increasingly popular in the robotics industry and academia due to their many potential applications. The goal of the Quadrotor Swarm Arena (QuaSAr) project is to construct a quadrotor swarm control testbed to provide researchers with the tools needed to experimentally investigate this emerging science. This testbed is equipped with a motion capture system, test control station, and numerous quadrotor UAVs. MATLAB-Simulink is utilized for control law development, data processing, and test control. This configuration allows researchers to test developing control law in a 'plug and play' manner as control development and test control are all completed …

Causal Loop Development Activity, Ali Mirchi

All ECSTATIC Materials

Students will work in groups to develop a causal loop diagram (CLD) to illustrate the structure and expected behavior of the fictional water short state of Nevizonato facilitate qualitative discussion of expected outcomes of a proposed water management strategy. This activity requires familiarity with systems thinking and system dynamics modeling. CLDs are introduced as a fundamental systems thinking tool for conceptual modeling.

Node-Based Resilience Measure Clustering With Applications To Noisy And Overlapping Communities In Complex Networks, John Matta, Tayo Obafemi-Ajayi, Jeffrey Borwey, Koushik Sinha, Donald C. Wunsch, Gunes Ercal

Electrical and Computer Engineering Faculty Research & Creative Works

This paper examines a schema for graph-theoretic clustering using node-based resilience measures. Node-based resilience measures optimize an objective based on a critical set of nodes whose removal causes some severity of disconnection in the network. Beyond presenting a general framework for the usage of node-based resilience measures for variations of clustering problems, we experimentally validate the usefulness of such methods in accomplishing the following: (i) clustering a graph in one step without knowing the number of clusters a priori; (ii) removing noise from noisy data; and (iii) detecting overlapping communities. We demonstrate that this clustering schema can be applied successfully …

An Analysis Of Harmonic Airloads Acting On Helicopter Rotor Blades, Iftekhar A. Riyad

LSU New Orleans Theses and Dissertations

Rotary wing aircrafts in any flight conditions suffer from excessive vibration which makes the passengers feel uncomfortable and causes fatigue failure in the structure. The main sources of vibration are the rotor harmonic airloads which originate primarily from the rapid variation of flow around the blade due to the vortex wake. In this thesis, a mathematical model is developed for rotor blades to compute the harmonic airloads at rotor blades for two flight conditions vertical takeoff and landing, and forward flight. The sectional lift, drag, and pitching moment are computed at a radial blade station for both flight conditions. The …

Ultra-Low Temperature Properties Of Correlated Materials, Seyed Mohammad Ali Radmanesh

LSU New Orleans Theses and Dissertations

Abstract

After the discovery of topological insulators (TIs), it has come to be widely recognized that topological states of matter can actually be widespread. In this sense, TIs have established a new paradigm about topological materials. Recent years have seen a surge of interest in topological semimetals, which embody two different ways of generalizing the effectively massless electrons to bulk materials. Dirac and, particularly, Weyl semimetals should support several transport and optical phenomena that are still being sought in experiments. A number of promising experimental results indicate superconductivity in members of half-Hesuler semimetals which realize the mixing singlet and triplet …

Improved Iterative Truncated Arithmetic Mean Filter, Prathyusha Surampudi Venkata

LSU New Orleans Theses and Dissertations

This thesis discusses image processing and filtering techniques with emphasis on Mean filter, Median filter, and different versions of the Iterative Truncated Arithmetic Mean (ITM) filter. Specifically, we review in detail the ITM algorithms (ITM1 and ITM2) proposed by Xudong Jiang. Although filtering is capable of reducing noise in an image, it usually also results in smoothening or some other form of distortion of image edges and file details. Therefore, maintaining a proper trade off between noise reduction and edge/detail distortion is key. In this thesis, an improvement over Xudong Jiang’s ITM filters, namely ITM3, has been proposed and tested …

Hydrodynamics Of An Anguilliform Swimming Motion Using Morison’S Equation, Naga Sasi Devarakonda

LSU New Orleans Theses and Dissertations

In this study, the hydrodynamic performance of anguilliform swimming motion is computed using Morison’s equation. This method was shown to predict the servo motor torques well. The anguilliform swimming motion is sinusoidal with increasing amplitude from head to tail. A “wakeless” swimming motion proposed by Vorus and Taravella (2011) with zero net circulation is considered.

This method is compared to the existing slender body theory and is validated with reference to the experimental results of NEELBOT-1.1 (Potts, 2015). The results for the study indicates that self-propulsion speed of the motion is independent of the oscillating tail amplitude at a constant …

Measuring Landscape Performance: Case Study Investigation, Hannah Michelle Lopresto, Brandon Zambrano, Catherine De Almeida

UCARE: Research Products

Participating in the Landscape Architecture Foundation’s 2018 Case Study Investigation has been an incredibly informative experience for our research team at the University of Nebraska-Lincoln. We are eager to shine a spotlight on the landscape performance of two Great Plains projects: P Street Corridor, a revitalized downtown streetscape in Lincoln, Nebraska, and Tom Hanafan River’s Edge Park, a waterfront redevelopment in Council Bluffs, Iowa. Working on the post-occupancy study of both projects has been extremely beneficial in understanding how reclaiming underutilized sites can create high-performing landscapes. Both are public projects in urban settings with primary goals of transforming formerly unpleasant, …

Forensic Analysis Of Immersive Virtual Reality Social Applications: A Primary Account, Ananya Yarramreddy, Peter Gromkowski, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

Our work presents the primary account for exploring the forensics of immersive Virtual Reality (VR) systems and their social applications. The Social VR applications studied in this work include Bigscreen, Altspace VR, Rec Room and Facebook Spaces. We explored the two most widely adopted consumer VR systems: the HTC Vive and the Oculus Rift. Our tests examined the efficacy of reconstructing evidence from network traffic as well as the systems themselves. The results showed that a significant amount of forensically relevant data such as user names, user profile pictures, events, and system details may be recovered. We anticipate that this …

Fabrication Of Mnox/Mwcnts-Gc Nanocatalyst For Oxygen Evolution Reaction, Yaser M. Asal Mr, Islam M. Al-Akraa Dr, Amr M. Arafa Eng.

Chemical Engineering

Manganese oxide (MnOx) and multiwalled carbon nanotubes (MWCNTs) are intended to modify the GC electrode for oxygen evolution reaction (OER). Optimization of MnOx loading is carried out and the deposition of 55 cycles was sufficient to obtain the highest activity toward OER. The stability of the catalyst is enhanced by the addition of MWCNTs. As a result, an amount of 22 kWh/Kg of O₂ of energy is saved. Several techniques including cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, field-emission scanning electron microscopy, and energy dispersive X-ray spectroscopy will be combined to track the catalyst activity and to determine its …

Relationship Between Time-Constants And 3db Cutoff Of High-Order Damped Lti Systems, Vladimir I. Prodanov, Katherina Prodanov

Electrical Engineering

This paper deals with linear time-invariant (LTI) systems and examines the link between the 3dB cutoff and time-constants. It shows that the cutoff frequency of a low-pass damped network can be estimated from the reciprocal of a p-norm calculated from the system's time-constants. Furthermore, to achieve good accuracy the p factor must have a fractional value, for example, p=1.7. Two formulas are derived, and their performance evaluated using Monte Carlo simulations which reveal a sub-3% error for most cases.

Preparation And Characterization Of Decorative And Heat Insulating Floor Tiles For Buildings Roofs, Hany A. Elazab Dr

Chemical Engineering

Since the beginning of the 5th century, people felt the urge to construct a sort of heat insulation system to their houses. This research paper focuses on the preparation, development and design of heat insulating tiles using materials like automobile tires powder and rice husk which are materials that are available at almost negligible costs and great amounts. Throughout this paper, experimental work will be provided to document, analyze and compare different insulating materials based on their thermal conductivity factor (K-factor), eco-nomic aspects, contribution to a greener earth, and mechanical properties. The results show that a mixture of used automobile …

Prior Day Effect In Forecasting Daily Natural Gas Flow From Monthly Data, Maral Fakoor, George F. Corliss, Ronald H. Brown

Electrical and Computer Engineering Faculty Research and Publications

Many needs exist in the energy industry where measurement is monthly yet daily values are required. The process of disaggregation of low frequency measurement to higher frequency values has been presented in this literature. Also, a novel method that accounts for prior-day weather impacts in the disaggregation process is presented, even though prior-day impacts are not directly recoverable from monthly data. Having initial daily weather and gas flow data, the weather and flow data are aggregated to generate simulated monthly weather and consumption data. Linear regression models can be powerful tools for parametrization of monthly/daily consumption models and will enable …

Preparation And Characterization Of Bullet-Proof Vests Based On Polyamide Fibers, Hany A. Elazab Dr

Chemical Engineering

Fiber reinforced plastics (FRP) is classified as one of the main classes of structural materials. Due to its high strength and light weight, it is considered for being used in a large scale of different applications. Particularly, bullet proof vests are widely used in order to protect the soldiers from being targeted in battle fields, however many modifications are being implemented to enhance the bullet resistivity of the vests for achieving more protection. This scientific paper investigates the enhanced properties of Twaron CT 736 when it is being reinforced with epoxy resin and topped with silicon carbide ceramics. The potential …

An Efficient Constructive Heuristic To Balance Trade-Offs Between Makespan And Flowtime In Permutation Flow Shop Scheduling, Feidi Dang, Wei Li, Honghan Ye

Mechanical Engineering Faculty Publications

Balancing trade-offs between production cost and holding cost is critical for production and operations management. Utilization of a production line affects production cost, which relates to makespan, and work-in-process (WIP) inventories in a production line affect holding cost, which relate to flowtime. There are trade-offs between two objectives, to minimize makespan and to minimize flowtime. Without addressing trade-off balancing issues in flow shop scheduling, WIP inventories are still high in manufacturing, generating unnecessary holding cost. However, utilization is coupled with WIP inventories. Low WIP inventory levels might lower utilization and generate high production cost. Most existing constructive heuristics focus only …

Twelve Questions For The Participatory Modeling Community, Rebecca Jordan, Steven Gray, Moira Zellner, Pierre D. Glynn, Alexey Voinov, Beatrice Hedelin, Eleanor J. Sterling, Kirsten Leong, Laura Schmitt Olabisi, Klaus Hubacek, Pierre Bommel, Todd K. Bendor, Antoine J. Jetter, Bethany Laursen, Alison Singer, Philippe J. Giabbanelli, Nagesh Kolagani, Laura Basco Carrera, Karen Jenni, Christina Prell, National Socio-Environmental Synthesis Center Participatory Modeling Pursuit Working Group

Engineering and Technology Management Faculty Publications and Presentations

Participatory modeling engages the implicit and explicit knowledge of stakeholders to create formalized and shared representations of reality and has evolved into a field of study as well as a practice. Participatory modeling researchers and practitioners who focus specifically on environmental resources met at the National Socio-Environmental Synthesis Center (SESYNC) in Annapolis, Maryland, over the course of 2 years to discuss the state of the field and future directions for participatory modeling. What follows is a description of 12 overarching groups of questions that could guide future inquiry.

Assessing Production Line Risk Using Bayesian Belief Networks And System Dynamics, Sudhir Punyamurthula, Fazleena Badurdeen

Mechanical Engineering Faculty Publications

Increased complexity in product design, strict regulations and a changing market make risk assessment critical for successful operations. Failure in responding quickly to raw material shortages, downtimes, deteriorating equipment conditions or other operational issues can prove to be an expensive affair. A company-wide risk assessment includes both external and internal operations. However, external/supplier risk assessment has been of major interest. Even though the scope of risk assessment at the production line level is not as broad as it is at the supply chain level, assessing risk would help recognize vulnerable areas of the production line, which would in turn help …

Multi-Pred: A Software Module For Predictive Modeling Of Coupled Multi-Physics Systems, Dan Gabriel Cacuci, Ruixian Fang, Madalina C. Badea

Faculty Publications

The software module MULTI-PRED implements the methodology for predictive modeling of coupled multi-physics systems (PM-CMPS) formulated by Cacuci [Ann. Nucl. Energy, Vol. 70, p, 266 (2014)]. This methodology fully takes into account the coupling terms between the systems but requires only the computational resources that would be needed to perform predictive modeling on each system separately. The PM-CMPS methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution based on a priori known mean values and uncertainties characterizing the experimental and computational parameters and results of interest responses called for the multi-physics models …

Efficacy Of Eluted Antibiotics In 3d Printed Orthopaedic Implants, Mohammed Mehdi Benmassaoud

Theses and Dissertations

Costs associated with musculoskeletal diseases in the United States account for 5.7 % of the Gross Domestic Product (GDP) [1]. As such, there is a need to pursue new ideas in orthopaedic implants that can decrease cost and improve patient care. In the recent years, 3D printing using Fused Deposition Modeling (FDM) or Stereolithography (SLA) has opened several exciting possibilities to create orthopaedic implants. Such implants can be engineered to release antibiotics in a controlled manner either by infusing the drug into the material during manufacturing or by using built-in design features such as micro-channels and reservoirs [2]. The use …

An Iot System For Converting Handwritten Text To Editable Format Via Gesture Recognition, Nidhi Patel

Master of Science in Computer Science Theses

Evaluation of traditional classroom has led to electronic classroom i.e. e-learning. Growth of traditional classroom doesn’t stop at e-learning or distance learning. Next step to electronic classroom is a smart classroom. Most popular features of electronic classroom is capturing video/photos of lecture content and extracting handwriting for note-taking. Numerous techniques have been implemented in order to extract handwriting from video/photo of the lecture but still the deficiency of few techniques can be resolved, and which can turn electronic classroom into smart classroom.

In this thesis, we present a real-time IoT system to convert handwritten text into editable format by implementing …