Engineering Commons^™

Machine Learning Based Computational Electromagnetic Analysis For Electromagnetic Compatibility, L. (Lijun) J. Jiang, H. M. Yao, H. H. Zhang, Y. W. Qin

Electrical and Computer Engineering Faculty Research & Creative Works

While machine learning is becoming a demanding request in every corner of modern technology development, we are trying to see if we could make computational electromagnetic algorithms compatible to machine learning methods. In this paper, we introduce two efforts in line with this direction: solving method of moments (MoM) can be seen as a training training process. Consequently, the artificial neural network (ANN) could be used to solve MoM naturally through training. Amazon Web Service (AWS) can be used as the computations platform to utilize the existing hardware and software resources for machine learning. Another effort regarding to the nonlinear …

Model Order Reduction Schemes In Solving Multi-Scale Electromagnetic Problems, Qin S. Liu, Li (Lijun) Jun Jiang, Qi Dai, Hui Gan, Tian Xia, Ting Wan, Sheng Sun, Weng Cho Chew

Electrical and Computer Engineering Faculty Research & Creative Works

Reduced-order models show significant advantages in solving multi-scale electromagnetic problems when the equivalence surfaces are used to enclose the dense-mesh features. With much coarse discretization on the equivalence surface, the computational complexities are largely reduced. Additionally, the scheme is suitable for the scattering problems especially when the location of radiator changes.

Noncontact Time-Domain Emi Measurement Of Two Adjacent Traces On A Pcb, Haimi Qiu, Chengyang Luo, Wenxiao Fang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Nonintrusive electromagnetic interference (EMI) detection is a powerful method for EMI diagnosis in high-speed links and multiple signal PCB designs. However, due to the dispersive nature of signal delivery passages and interferences from neighborhood signals, it is very difficult to locate exactly the EMI source of two adjacent traces without contact. In this paper, a noncontact time-domain voltage measurement method is proposed to detect the EMI signals of two adjacent traces on a PCB. A near-field electric probe is employed and a reconstruction algorithm is developed to recover the voltage signals without contact. Through experimental benchmarks, it is demonstrated that …

The Evolution Of Peec Methods For Si, Pi, And Antennas, Lijun Jiang, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Soft Ferrites For Emc Applications, Marina Y. Koledintseva

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

A Novel Indoor Positioning System For Firefighters In Unprepared Scenarios, Vamsi Karthik Vadlamani

Electrical and Computer Engineering ETDs

Situational awareness and indoor positioning of firefighters are types of information of paramount importance to the success of search and rescue operations. GPS units are undependable for use in Indoor Positioning Systems due to their associated mar- gins of error in position and their reliance on satellite communication that can be interrupted inside large structures. There are few other techniques like dead reck- oning, Wifi and bluetooth based triangulation, Structure from Motion (SFM) based scene reconstruction for Indoor positioning system. However due to high temper- atures, the rapidly changing environment of fires, and low parallax in the thermal images, the …

Quality Criteria For Electromagnetic Wave Absorbers, Konstantin N. Rozanov, Marina Y. Koledintseva

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Equivalent Capacitance And Multilayer Models For Effective Roughness Dielectric In Pcbs, Marina Koledintseva, Tracey Vincent

Electrical and Computer Engineering Faculty Research & Creative Works

Effective Roughness Dielectric (ERD) is used to substitute copper foil roughness in printed circuit board (PCB) interconnects. In this work, the equivalent capacitance approach is used to get the ERD parameters based on the understanding that there is a gradual variation of concentration of metallic inclusions in the transition layer between the dielectric and foil. The metallic concentration profile can be extracted from scanning electron microscopy (SEM) or high-resolution optical microscopy. The proposed model of equivalent capacitance with gradient dielectric is applied to standard (STD), very-low-profile (VLP), and hyper-very-low profile (HVLP) foils, and the frequency-dependent dielectric parameters of the homogenized …

Influence Of Higher-Order Modes In Coaxial Waveguide On Measurements Of Material Parameters, Dmitry A. Petrov, Konstantin N. Rozanov, Marina Y. Koledintseva

Electrical and Computer Engineering Faculty Research & Creative Works

The use of a coaxial air-filled line as a test fixture for measuring complex permittivity and permeability often shows odd resonance-like behavior of material parameters as functions of frequency. This effect is typically either ascribed to the half-wavelength resonance at the sample length, or erroneously misinterpreted as intrinsic resonance behavior of the material. However, as is shown in this paper, such behavior can be attributed to excitation of the higher-order modes on the surface of the sample resulting in resonance absorption of electromagnetic energy in the test fixture. Herein, analytical, numerical, and experimental results show that there can actually be …

Introduction To The (Peec) Partial Element Equivalent Circuit Approach Applied To Si/Pi, Albert E. Ruehli, Lijun Jiang, Giulio Antonini

Electrical and Computer Engineering Faculty Research & Creative Works

This article consists only of a collection of slides from the author's conference presentation.

Introduction To The Finite-Difference Time-Domain (Fdtd) Technique, Bruce Archambeault

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Fluted Films, Nathan B. Spiers, Mohammad M. Mansoor, Jesse Belden, Randy Craig Hurd, Zhao Pan, Tadd T. Truscott

Mechanical and Aerospace Engineering Faculty Publications

This paper is associated with a poster winner of a 2017 APS/DFD Milton van Dyke Award for work presented at the DFD Gallery of Fluid Motion. The original poster is available from the Gallery of Fluid Motion, https://doi.org/10.1103/APS.DFD.2017.GFM.P0030

Community Resilience Management : Reflections And Strategies From Corporate Sustainability, Jennifer Schneider, John Hummel, Joseph M. Rosenbeck 4756469, Sarah Dobie

Journal of Environmental Sustainability

Creating community resilience is a daunting task, both in scope and application, therefore it is useful to examine related efforts to inform our strategy. Sustainability, specifically corporate sustainability, has developed through similar challenges and provides insight into the possible trajectory of community resilience management. We find that both concepts reflect similar origins, developmental paths and merging goals at a scale that can be systematically managed. Therefore, we describe four strategies from corporate sustainability management that can be applied to community resilience 1) consider the community context while implementing an increasingly broad view of responsibility; 2) integrate and engage across constructs; …

Design And Implementation Of A Hybrid Face Recognition Technique, Asim S. Chaudhry

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Asim S. Chaudhry on October 16, 2018.

Webinar: Addressing Bicycle-Vehicle Conflicts With Alternate Signal Control Strategies, Sirisha Kothuri

TREC Webinar Series

There is nationwide interest in supporting sustainable and active transportation modes such as bicycling and walking due to the many benefits associated with them, including reduced congestion, lower emissions and improved health. Although the number of bicyclists is increasing, safety remains a top concern. In urban areas, a common crash type involving bicycles at intersections is the “right hook” where a right-turning vehicle collides with a through bicyclist. While geometric treatments and pavement markings have been studied, there is a lack of research on signal timing treatments to address right-hook bicycle-vehicle conflicts.

Addressing Bicycle-Vehicle Conflicts with Alternate Signal Control Strategies …

Birefringence Imaging Chromatography Based On Highly Ordered 3d Nanostructures, Mathias M. Schubert, Tino Hofmann, David S. Hage, Erika Pfaunmiller, Craig M. Herzinger, John A. Woollam, Stefan Schoeche

Department of Electrical and Computer Engineering: Faculty Publications

Ellipsometers and polarimeters or the like to investigate analyte containing fluids applied to a substrate - stage having a multiplicity of nano - structures that project non - normal to a surface thereof , including dynamics of interaction there with , to the end of evaluating and presenting at least partial Jones or Mueller Matricies corresponding to a multiplicity of locations over an imaged area .

A Narrow-Wall Complementary-Split-Ring Slotted Waveguide Antenna For High-Power-Microwave Applications, Xuyuan Pan

Electrical and Computer Engineering ETDs

A narrow-band, rugged, complementary-split-ring (CSR) slotted waveguide antenna (SWA) with significant size reduction is presented. The antenna is to be vertically front mounted on a land vehicle, with a horizontally polarized fan-beam radiation pattern. The radiation characteristics of a CSR slot in the narrow-wall of a rectangular waveguide are studied for the first time in this work. Both simulation and experimental results show that the complementary-split-ring slot radiates a linearly polarized wave with a total efficiency and gain close to those of conventional longitudinal slots, while the proposed CSR slots have a maximal outer diameter of 0.23λ₀, much …

Crash/Near-Crash: Impact Of Secondary Tasks And Real-Time Detection Of Distracted Driving, Peter Ramzy Zaki Bakhit

LSU Doctoral Dissertations

The main goal of this dissertation is to investigate the problem of distracted driving from two different perspectives. First, the identification of possible sources of distraction and their associated crash/near-crash risk. That can assist government officials toward more informed decision-making process, allowing for optimized allocation of available resources to reduce roadway crashes and improve traffic safety. Second, actively counteracting the distracted driving phenomenon by quantitative evaluation of eye glance patterns.

This dissertation research consists of two different parts. The first part provides an in-depth analysis for the increased crash/near-crash risk associated with different secondary task activities using the largest real-world …

Numerical Study Of Liquid Atomization And Breakup Using The Volume Of Fluid Method In Ansys Fluent, Sai Saran Kandati

LSU Master's Theses

The spherical metal particles produced from the centrifugal atomization process have been the topic of numerous theoretical, experimental and numerical studies from the past few years. This atomization process uses centrifugal force to break-up molten material into spherical droplets, which are quenched into solidified granules by the flow of cold air on the spherical droplets. In the present work, a transient three-dimensional multiphase CFD model is applied to three different materials: Molten slag, aqueous glycerol solution, and molten Ni-Nb to study the influence of the dimensionless parameters on the centrifugal atomization outcome.

Results from numerical experiments indicated that the droplet …

Evaluation Of Synthetic Cpt And Soil Boring Data By Various Spatial Interpolation Techniques, Md Habibur Rahman

LSU Master's Theses

In order to incorporate the influence of collected in-situ data, the spatial correlation between the data and the foundation needs to be explored. However, risk and uncertainty are the characteristics of the soil that cannot be eliminated. Statistical information of the soil property can be estimated from available field data obtained from testing at discrete locations across the site. In this research, several well-established spatial interpolation methods like ordinary kriging (OK), simple kriging (SK), inverse distance weight (IDW), spline, natural neighbor (NaN) and universal kriging (UK) were incorporated to evaluate the best method. Six CPT (Cone penetration test) (Tip Resistance …

Machine Learning Tools For Optimization Of Fuel Consumption At Signalized Intersections In Connected/Automated Vehicles Environment, Saleh Ragab Mousa

LSU Doctoral Dissertations

Researchers continue to seek numerous techniques for making the transportation sector more sustainable in terms of fuel consumption and greenhouse gas emissions. Among the most effective techniques is Eco-driving at signalized intersections. Eco-driving is a complex control problem where drivers approaching the intersections are guided, over a period of time, to optimize fuel consumption. Eco-driving control systems reduce fuel consumption by optimizing vehicle trajectories near signalized intersections based on information of the SpaT (Signal Phase and Timing). Developing Eco-driving applications for semi-actuated signals, unlike pre-timed, is more challenging due to variations in cycle length resulting from fluctuations in traffic demand. …

Papaverine And Its Derivatives Radiosensitize Solid Tumors By Inhibiting Mitochondrial Metabolism, Martin Benej, Xiangqian Hong, Sandip Vibhute, Sabina Scott, Jinghai Wu, Edward Graves, Quynh-Thu Le, Albert C. Koong, Amato J. Giaccia, Bing Yu, Ching-Shih Chen, Ioanna Papandreou, Nicholas C. Denko

Biomedical Engineering Faculty Research and Publications

Tumor hypoxia reduces the effectiveness of radiation therapy by limiting the biologically effective dose. An acute increase in tumor oxygenation before radiation treatment should therefore significantly improve the tumor cell kill after radiation. Efforts to increase oxygen delivery to the tumor have not shown positive clinical results. Here we show that targeting mitochondrial respiration results in a significant reduction of the tumor cells’ demand for oxygen, leading to increased tumor oxygenation and radiation response. We identified an activity of the FDA-approved drug papaverine as an inhibitor of mitochondrial complex I. We also provide genetic evidence that papaverine’s complex I inhibition …

Three-Dimensional Forming Of Multi-Layered Materials: Material Heat Response And Quality Aspects, Sami-Seppo Ovaska, Pavel Geydt, Ville Leminen, Johanna Lyytikäinen, Sami Matthews, Panu Tanninen, Malte Wallmeier, Marek Hauptmann, Kaj Backfolk

Journal of Applied Packaging Research

The micro- and macrostructural changes occurring in multi-layered substrates during three-dimensional forming were studied by atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical analyses. Particular attention was paid to heat-induced deformations at the interface between of polymeric coating layer and the paperboard. With excessive heat transfer, occasional delamination of polyethylene terephthalate (PET) coating from the paperboard was observed. The mechanism behind delamination was studied in detail in-situ with an AFM at temperatures relevant to the converting process. Based on the analysis, the delamination could partially be linked to the widening of the initially-existing nano-scale cracks at the coating-paperboard …

Optimal And Objective Placement Of Sensors In Water Distribution Systems Using Information Theory, Mohammad S. Khorshidi, Mohammad Reza Nikoo, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

Optimization-based deployment of contamination warning system in water distribution systems has been widely used in the literature, due to their superior performance compared to rule- and opinion-based approaches. However, optimization techniques impose an excessive computational burden, which in turn is compensated for by shrinking the problem’s decision space and/or using faster optimization algorithms with less accuracy. This imposes subjectivity in interpretation of the system and associated risks, and undermines model’s accuracy by not exploring the entire feasible space. We propose a framework that uses information theoretic techniques, including value of information and transinformation entropy, for optimal sensor placement. This can …

Utah State Grad Burke Williams Really Is A Rocket Scientist | College Of Engineering, Usu College Of Engineering

College of Engineering News

Burke Williams was born and raised in Alpine, Utah, but has now lived in Farr West Utah for 13-plus years.

Numerical Simulation And Experimental Validation Of The Vibration Suppression Control By Using Input Shaping Technique With Extended Kalman Filter, Yi-Cheng Huang, Yen-Lin Lee, Ming-You Ma

Journal of Marine Science and Technology–Taiwan

The development of high-speed and high-precision machine tools is a challenge for designers because of the difficulties associated with the vibration control of mechanical systems. This study proposed a method to suppress such vibration by using input shaping functions with an extended Kalman filter (EKF). Input shaping is a technique that deploys one or several designed impulses to eliminate the vibration response of a mechanical system. To determine the parameters of an input shaper, the vibration of the mechanical system was assumed to be a simple, exponentially decaying sinusoidal signal. The EKF was used to estimate signal parameters, namely frequency …

Cip2a Immunosensor Comprised Of Vertically-Aligned Carbon Nanotube Interdigitated Electrodes Towards Point-Of-Care Oral Cancer Screening, Shaowei Ding, Suprem R. Das, Benjamin J. Brownlee, Kshama Parate, Taylor Davis, Loreen R. Stromberg, Edward K.L. Chan, Joseph Katz, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

Vertically aligned carbon nanotube array (VANTA) coatings have recently garnered much attention due in part to their unique material properties including light absorption, chemical inertness, and electrical conductivity. Herein we report the first use of VANTAs grown via chemical vapor deposition in a 2D interdigitated electrode (IDE) footprint with a high height-to-width aspect ratio (3:1 or 75:25 µm). The VANTA-IDE is functionalized with an antibody (Ab) specific to the human cancerous inhibitor PP2A (CIP2A)—a alivary oncoprotein that is associated with a variety of malignancies such as oral, breast, and multiple myeloma cancers. The resultant immunosensor is capable of detecting CIP2A …

Performance Comparison Of Low Temperature And Chemical Absorption Carbon Capture Processes In Response To Dynamic Electricity Demand And Price Profiles, Seyed Mostafa Safdarnejad, John Hedengren, Kody M. Powell

Faculty Publications

Current projections to the year 2050 reveal that fossil fuels will remain the main source of energy generation. To achieve the target limits of carbon dioxide emission, set by national and international policies, carbon capture will play a key role. Modeling and optimization of various carbon capture technologies such as pre-combustion, oxy-fuel, and post-combustion, when integrated with coal-fired power plants, have been researched extensively in literature. Research on the integration of power generation with capture technologies regarding comparisons between the different schemes in response to dynamic inputs is lacking. This work provides a comparison between a low temperature carbon capture …

A Bismuth Attack At Grain-Boundaries Of Ceria-Based Electrolytes, Tianrang Yang, Kevin Huang

Faculty Publications

Bismuth is a common additive of commercial silver pastes for enhancing metallization effect; silver paste is also commonly used in high-temperature electrochemical cells as a current collector or contact layer. We here report that the minor amount of bismuth in commercial silver pastes can transport to the interface of electrode/Gd-doped CeO₂ (GDC) electrolyte and seriously corrode grain-boundaries (GBs) of the GDC electrolyte, a commonly used intermediate-temperature electrolyte, causing significant ionic conductivity degradation. A comprehensive electron microscopic analysis reveals that the Bi-corrosion takes place along GBs of GDC electrolyte acting as “washing flux” agent, causing grain separation and thus blocking …

An Experimental And Numerical Study Of A High Speed Planing Craft With Full-Scale Validation, Ahmet Gultekin Avci, Baris Barlas

Journal of Marine Science and Technology–Taiwan

During the conceptual design of a high speed craft, the most important element of the process is resistance and drag prediction. To increase efficiency in high speed craft design, the prediction of total resistance must be increasingly accurate. To achieve this objective, model towing tank tests were used. Although testing will always be necessary, the growing field of computational fluid dynamics (CFD) is gaining interest, considering the experimental costs. This paper investigates both the experimental and numerical methods of total resistance prediction for a high speed hull, including comparison of the trim and sinkage measurements. Additionally, the model tests were …