Engineering Commons^™

Inspire E-News 02 2019, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• WMU included in $2.2 million state grant to enhance mobility for veterans
• Disruptive technology theme of Engineers Week Dinner
• Shrestha receives Fullbright award
• Paper engineers host student summit
• Area students get to "Dream Big"
• Printing organization provides scholarship
• Save the date to "Give a Slice"

Dynamic Light Scattering Optical Coherence Tomography To Probe Motion Of Subcellular Scatterers., Nico J J Arezza, Marjan Razani, Michael C Kolios

Medical Biophysics Publications

Optical coherence tomography (OCT) is used to provide anatomical information of biological systems but can also provide functional information by characterizing the motion of intracellular structures. Dynamic light scattering OCT was performed on intact, control MCF-7 breast cancer cells and cells either treated with paclitaxel to induce apoptosis or deprived of nutrients to induce oncosis. Autocorrelations (ACs) of the temporal fluctuations of OCT intensity signals demonstrate a significant decrease in decorrelation time after 24 h in both the paclitaxel-treated and nutrient-deprived cell groups but no significant differences between the two groups. The acquired ACs were then used as input for …

Preformed Partial Gel Injection Chased By Low-Salinity Waterflooding In Fractured Carbonate Cores, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Abdullah Almansour

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fractures and oil-wet conditions significantly limit oil recovery in carbonate reservoirs. Gel treatment has been applied in injector wells to modify the prevailing reservoir streamlines and significantly reduce fracture permeability, whereas low-salinity waterflooding has been applied experimentally to modify rock wettability toward water-wet for improved oil recovery. However, both processes have limitations that cannot be resolved using a single method. The objective of this study was to test whether low-salinity water could enable gel particles to move deeply into fractures to efficiently increase oil recovery and control water production. A semitransparent fracture model of carbonate cores and acrylic plates was …

Towards Multi-Lingual Pneumonia Research Data Collection Using The Community-Acquired Pneumonia International Cohort Study Database, William A. Mattingly, Kimberley A. Buckner, Senen Pena

The University of Louisville Journal of Respiratory Infections

Background: Although multilingual interfaces are preferred by most users when they have a choice, organizations are often unable to support and troubleshoot problems involving multiple user languages. Software that has been structured with multiple languages and data interlinking considerations early in its development is more likely to be easily maintained. We describe the process of adding multilingual support to the CAPO international Cohort study database using REDCap.

Methods: Using Google Translate API we extend the supported Spanish language version of REDCap to the most recent version used by CAPO, 8.1.4. We then translate the English data dictionary for CAPO to …

W&B Problems For Far/Cs 25 Airplanes Tutorial, Nihad E. Daidzic

Aviation Department Publications

Weight and Balance (W&B) computations are essential step in ensuring that the aircraft (in this case FAR/CS 25 Transport-category airplanes) is properly loaded with its Center of Mass (CM) of Center of Weight/Gravity (CG) in the proper range.

Bartja Dhe Shpërndarja E Energjisë Elektrike Në Republikën E Kosovës, Berat Bajrami

Theses and Dissertations

Sektori i energjisë elektrike si një ndër sektorët më të rëndësishëm industrial në ekonominë e Kosovës, duhet të planifikohet dhe zhvillohet në mënyrë adekuate dhe në kohë. Rrjeti i bartjes dhe shpërndarjes luan rol të rëndësishëm në sistemin elektroenergjetik duke bërë të mundur bartjen dhe shpërndarjen e sasive të mëdha të energjisë elektrike nga gjeneratorët vendor dhe nga importet, deri te konsumatorët e mëdhenj dhe nyjet shpërndarëse. Zhvillimi i shoqërisë dhe ngritja e varësisë për energjinë elektrike kërkon rrjet të bartjes dhe shpërndarjes të sigurt, të besueshëm dhe efikas. Varësia në rritje për energji elektrike nënkupton që toleranca për ndërprerje …

Gjenerimi I Energjisë Elektrike Përmes Paneleve Fotovoltaike Të Lidhur Në Rrjetin Elektrik Shpërndarës, Agon Abazi

Theses and Dissertations

Energjia diellore është një nga burimet për perfitimin e energjisë elektrike, duke e pare gjithnje në rritje të konsumit dhe nevojen për energji elektrike, u deshtë të merren hapa konkret dhe investime të mëdha në këtë drejtim për përfitimin e energjisë elektrike nga energjia e riperteritshme qoftë nga dielli, energjia e erës dhe burime të tjera, duke e konsideru që me energji të riperteritshme nuk ka emetim dhe ndotje të ambientit. Nxitur nga zhvillimet e fundit teknologjike dhe shqetësimi në rritje për qëndrueshmërin dhe ndikimin mjedisor të përdorimit të karburantit konvencional, mundësia për të prodhuar energji të pastër dhe të …

Dimensionimi I Mbajtësit Linear Të Tipit Kapriatë, Misim Bela

Theses and Dissertations

Në këtë temë do të flasim për konstruksionet metalike, në veçanti për konstruksionet kapriatë të cilat janë të ndërtuara prej çeliku. Janë përshkruar karakteristikat e tyre, përdorimi i tyre, vetitë dhe tipet e konstruktimit, projektimi dhe dimensionimi i konstruksioneve metalike. Janë përshkruar edhe llojet e kapriatave, karakteristikat e tyre duke u bazuar në llojin e kapriatës në të cilat rolë shumë të rëndësishën luan hapësira e cila duhet të mbulohet në bazë të cilës përcaktohet lloji i kapriatës. Detyra kryesore e këtij punimi është projektimi i një kapriatë duke pasur parasysh hapësirën që do të mbulohet, llojet e ngarkesave, klasën …

Sanimi I Pjeseve Te Asfaltit Ne Temperatur E Te Ulet Te Dimirit, Gjyljeta Kabashi

Theses and Dissertations

Kërkesat e komunikacionit rrugor për rrugët e ndërtuara dhe të përshtatura ndaj kushteve për makinat e shpejta dhe të rënda motorike,me nivele më të mëdha shërbimi ,shkallë sigurie dhe qëndrueshmëri të planifikuar,si dhe hulumtimet e deritanishme eksperimentale në fushën e teknologjisë për prodhimin e asfaltit. Në katër dekadat e kaluara kishin dhe akoma kanë ndikim të konsiderueshëm në përmirësimin e koncepteve për projektimin dhe ndërtimin e rrugëve dhe aeroporteve, sidomos të konstruksioneve fleksibile rrugore.

Ndryshimet e tilla janë pasojë e zhvillimit dhe përkryerjes së prodhimit të mjeteve lidhëse nga bitumet rrugore të fituara gjatë proceseve të rafinimit te naftës në …

Organizimi Në Ndërtimtari, Rexhep Olluri

Theses and Dissertations

Ndërtimtaria është veprimtari specifike ekonomike që ka për synim ngritjen dhe rikonstruktimin e objekteve ndërtimore. Si veprimtari, ajo realizon produktin e caktuar, objektin ndertimor-arkitektonik. Ndërtimtaria veqohet për shkak të aktiviteteve të shumta që nevojiten për arritjen e një rezultati brenda një afati kohor. Secili aktivitet si proces teknologjik ka kohëzgjatjen e tij.

Varësisht nga natyra e projektit kemi:

• Aktivitete që kryhen në vartësi nga aktivitetet tjera paraprake
• Aktivitete të pavarura, që kryhen në të njejtën kohë me aktivitet tjera.

Planifikimi dhe strukturimi i aktiviteteve punuese në varësi të kohës quhet plan dinamik i punës. Paraqitja e aktiviteteve dhe kohëzgjatjes së …

Review Of Fiber Optic Sensors For Structural Fire Engineering, Yi Bao, Ying Huang, Matthew S. Hoehler, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reliable and accurate measurements of temperature and strain in structures subjected to fire can be difficult to obtain using traditional sensing technologies based on electrical signals. Fiber optic sensors, which are based on light signals, solve many of the problems of monitoring structures in high temperature environments; however, they present their own challenges. This paper, which is intended for structural engineers new to fiber optic sensors, reviews various fiber optic sensors that have been used to make measurements in structure fires, including the sensing principles, fabrication, key characteristics, and recently-reported applications. Three categories of fiber optic sensors are reviewed: Grating-based …

Maximum Coverage Capacitated Facility Location Problem With Range Constrained Drones, Darshan Chauhan, Avinash Unnikrishnan, Miguel Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Given a set of demand and potential facility locations and a set of fully available charged drones, an agency seeks to locate a pre-specified number of capacitated facilities and assign drones to the located facilities to serve the demands. The facilities serve as drone launching sites for distributing the resources. Each drone makes several one-to-one trips from the facility location to the demand points and back until the battery range is met. The planning period is short-term and therefore the recharging of drone batteries is not considered. This paper presents an integer linear programming formulation with the objective of maximizing …

Raman Spectroscopy As A Predictive Tool For Monitoring Osteoporosis Therapy In A Rat Model Of Postmenopausal Osteoporosis, J. Renwick Beattie, Antonia Sophocleous, M. Clare Caraher, Olive O'Driscoll, Niamh M. Cummins, Steven E.J. Bell, Mark R. Towler, Alireza Rahimnejad Yazdi, Stuart H. Ralston, Aymen I. Idris

Chemical and Biochemical Engineering Faculty Research & Creative Works

Pharmacological therapy of osteoporosis reduces bone loss and risk of fracture in patients. Modulation of bone mineral density cannot explain all effects. Other aspects of bone quality affecting fragility and ways to monitor them need to be better understood. Keratinous tissue acts as surrogate marker for bone protein deterioration caused by oestrogen deficiency in rats. Ovariectomised rats were treated with alendronate (ALN), parathyroid hormone (PTH) or estrogen (E2). MicroCT assessed macro structural changes. Raman spectroscopy assessed biochemical changes. Micro CT confirmed that all treatments prevented ovariectomy-induced macro structural bone loss in rats. PTH induced macro structural changes unrelated to ovariectomy. …

Optimization Of The Catalytic Performance Of Pd/Fe 3 O 4 Nanoparticles Prepared Via Microwave-Assisted Synthesis For Pharmaceutical And Catalysis Applications, Hany A. Elazab, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microwave assisted synthesis technique was used to prepare palladium supported on iron oxide nanoparticles. The advantage of using microwave irradiation as a synthetic tool is due to its unique features as a one step, simple, versatile, and rapid process. The reactants are added simply at room temperature without using high-temperature injection. Hydrazine hydrate was added by the following ratios (0.1, 0.2, 0.3, 0.4, 0.6, 0.8, 1, 1.6, and 3) ml to the different prepared samples at room temperature in order to investigate its effect on the catalytic performance of the prepared catalysts. The prepared catalyst could be used as an …

Exploring The Effects Of Electrospun Fiber Surface Nanotopography On Neurite Outgrowth And Branching In Neuron Cultures, Anthony R. D'Amato, Devan L. Puhl, Alexis M. Ziemba, Christopher D.L. Johnson, Janneke Doedee, Jonathan Bao, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Three aligned, electro spun fiber scaffolds with unique surface features were created from poly-L-lactic acid (PLLA). Fibers without surface nano topography (smooth fibers), fibers with surface divots (shallow pits), and fibers with surface pits (deeper pits) were fabricated, and fiber alignment, diameter, and density were characterized using scanning electron microscopy (SEM). Whole dorsal root ganglia (DRG) were isolated from rats and placed onto uncoated fibers or fibers coated with laminin. On uncoated fibers, neurite outgrowth was restricted by fibers displaying devoted or pitted nano topography when compared to neurite outgrowth on smooth fibers. However, neurites extending from whole DRG cultured …

Fluorine-Containing Oxidizers For Metal Fuels In Energetic Formulations, Siva Kumar Valluri, Mirko Schoenitz, Edward Dreizin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fluorine containing oxidizers, primarily polymers, are extensively used in pyrotechnic compositions. Fluorinated oxidizers are less explored for metalized propellants and explosives despite a potential advantage of substantial heat release combined with gaseous combustion products. This review summarizes different types of fluorinated oxidizers used in energetic formulations or of potential interest for such systems, including gases, polymers, and inorganic compounds. Types of energetic formulations employing metals and fluoropolymers are discussed in more detail, including methods used to prepare composites and resulting salient features of the obtained materials. Laboratory experiments characterizing such materials, in particular, electron microscopy and thermal analysis, are discussed, …

Large-Strain Strength Of Polymer-Modified Kaolinite And Fly Ash-Kaolinite Mixtures, Xin Kang, Junnan Cao, Bate Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Polymers have gained gradual attention in soil stabilization as a sustainable alternative to inorganic counterparts such as cement. However, the effects of polymers on the strength of soils and soil-waste mixtures are still unclear. Meanwhile, waste recycling has been important in fostering a sustainable environment in recent decades. To solve the deficiency in knowledge, large-strain strength of polymer-modified kaolinite (KA) and Class-F fly ash-kaolinite mixtures (FAKAs) was investigated with isotropically consolidated undrained triaxial compression tests. Both synthetic polymer (polyethylene oxide, PEO) and naturally occurring biopolymers (chitosan and xanthan gum) were used. An interface model was also proposed to account for …

Recent Advances On Carrier And Exciton Self-Trapping In Strontium Titanate: Understanding The Luminescence Emissions, Miguel L. Crespillo, Joseph T. Graham, Fernando Agullo-Lopez, Yanwen Zhang, William J. Weber

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

An up-to-date review on recent results for self-trapping of free electrons and holes, as well as excitons, in strontium titanate (STO), which gives rise to small polarons and self-trapped excitons (STEs) is presented. Special attention is paid to the role of carrier and exciton self-trapping on the luminescence emissions under a variety of excitation sources with special emphasis on experiments with laser pulses and energetic ion-beams. In spite of the extensive research effort, a definitive identification of such localized states, as well as a suitable understanding of their operative light emission mechanisms, has remained lacking or controversial. However, promising advances …

A Pulse Sensor Interface Design For Fpga Based Multisensor Health Monitoring Platform, Yu Wang, Sunghoon Jang

Publications and Research

The FPGA-based platform is critical for producing an inexpensive early validation platform design. In past years, sensor nodes based on the FPGA platform have been proposed to be IoT low-end devices. In this study, we present the FPGA based IoT low-end reconfigurable pulse sensor interface design that can be integrated with a multi-sensor healthcare platform to monitor a human pulse vital sign and be able to distinguish between user normal, Bradycardia, or Tachycardia heart rate. The pulse sensor interface is implemented by VHDL programming and FPGA technology. The designed pulse sensor peripheral interface is reliable and reconfigurable. It can collect …

Aid Project Summary Report For Intelligent Compaction, David Q. Hunsucker, Kean H. Ashurst Jr., Brad W. Rister

Kentucky Transportation Center Research Report

This study reviews data from five roadway construction projects on which intelligent compaction (IC) techniques were used to achieve the more uniform compaction of road-building materials. Kentucky Transportation Center (KTC) researchers looked at IC data collected from these projects — resulting in the production of eight analyzable data sets — to determine whether they complied with the special construction note included in contract documents. The report also compares the intelligent compaction measurement value (ICMV) collected on each project to traditional laboratory results. Researchers used Veta software to analyze geospatial data collected from IC machines during construction work. Of the data …

Graphene Based Functional Devices: A Short Review, Rong Wang, Xin Gang Ren, Ze Yan, Li (Lijun) Jun Jiang, Wei E.I. Sha, Guang Cun Shan

Electrical and Computer Engineering Faculty Research & Creative Works

Graphene is an ideal 2D material system bridging electronic and photonic devices. It also breaks the fundamental speed and size limits by electronics and photonics, respectively. Graphene offers multiple functions of signal transmission, emission, modulation, and detection in a broad band, high speed, compact size, and low loss. Here, we have a brief view of graphene based functional devices at microwave, terahertz, and optical frequencies. Their fundamental physics and computational models were discussed as well.

Deep-Turbulence Wavefront Sensing Using Digital Holography In The On-Axis Phase Shifting Recording Geometry With Comparisons To The Self-Referencing Interferometer, Douglas E. Thornton, Mark F. Spencer, Glen P. Perram

Faculty Publications

In this paper, we study the use of digital holography in the on-axis phase-shifting recording geometry for the purposes of deep-turbulence wavefront sensing. In particular, we develop closed-form expressions for the field-estimated Strehl ratio and signal-to-noise ratio for three separate phase-shifting strategies—the four-, three-, and two-step methods. These closed-form expressions compare favorably with our detailed wave-optics simulations, which propagate a point-source beacon through deep-turbulence conditions, model digital holography with noise, and calculate the Monte Carlo averages associated with increasing turbulence strengths and decreasing focal-plane array sampling. Overall, the results show the four-step method is the most efficient phase-shifting strategy and …

A Framework For Process Inspection Of Metal Additive Manufacturing, Chih-Kun Cheng, Frank W. Liou, Yi-Chien Cheng, Sheng-Chih Shen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, we propose a process inspection framework for metal additive manufacturing (AM) processes. AM, also known as 3D printing, is the process of joining materials to make objects on the basis of 3D model data and is envisioned to play a strategic role in maintaining economic and scientific dominance. Different from conventional manufacturing methods, the AM process is a point-by-point and layer-by-layer manufacturing. Thus, there are many opportunities to generate a process error that can cause quality issues in an AM part. A systematic AM process inspection is needed to yield acceptable performance of the part. The critical …

Closed-Form Solution For Curling Responses In Rigid Pavements, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

Closed-form expressions for calculating stresses and displacements of partially restrained concrete pavement caused by a linear temperature gradient are presented. Translational and rotational linear elastic springs along the slab edges defined the partial restraint. In addition to plate theory behavior, the model assumes linear elastic concrete and an infinitely long slab resting on a Winkler foundation. The solutions of curling stresses and displacements were validated using the finite-element (FE) method and quantified the effect of semirigid connections, slab and foundation material properties, and slab thickness and width on them. Rotational and translational restraints, which can be related to joint condition …

Clinical Research In Pneumonia: Role Of Artificial Intelligence, Timothy L. Wiemken, Robert R. Kelley, William A. Mattingly, Julio A. Ramirez

The University of Louisville Journal of Respiratory Infections

No abstract provided.

Mean Curvature Flow Of Compact Spacelike Submanifolds In Higher Codimension, Brendan Guilfoyle, Wilhelm Klingenberg

Publications

We prove long-time existence for mean curvature flow of a smooth n-dimensional spacelike submanifold of an n + m dimensional manifold whose metric satisfies the timelike curvature condition.

Introducing The Default Effect: Reducing The Gap Between Theoretical Prediction And Actual Energy Consumed By Dwellings Through Characterising Data More Representative Of National Dwellings Stocks, Ciara Ahern

Doctoral

Dwelling stock models that include the renovation status of the dwelling stock enable energy analyses of the stock. Using Ireland’s predominant single‐family housing typology as a case study dwelling, the overarching objective of this research is to define a transparent generalisable methodology to create a stock model from a large empirical Energy Performance Certification (EPC) database, employing reference dwellings (RDs) defined using a ‘bottom‐up’ approach. RDs are to be reported in compliance with Regulation No. (EU) 244/2012. The generalisable methodology defined allows for the development of stock models from EPC datasets. Where obtaining the required data would be prohibitively costly, …

Influence Of Micro-Structured Superhydrophobic Surfaces On Nucleation And Natural Convection In A Heated Pool, Adam Cowley, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

This word experimentally explores sub-boiling pool nucleation on micro-structured superhydrophobic surfaces. All surfaces tested were submerged in a 20 mm deep pool of water and heated from below to maintain a constant surface temperature, while the side walls of the pool were insulated, and the top was covered. Three thermocouples positioned in the pool obtain the average pool temperature. A heat flux sensor is placed directly beneath the surface to measure the heat flux supplied to the pool. Free convection heat transfer coefficients are obtained for the sub-boiling temperature range of 40 – 90 ºC. Six surface types are studied: …

Deficit Irrigation Management Of Maize In The High Plains Aquifer Region: A Review, Daran Rudnick, Sibel Irmak, C. West, J.L. Chavez, I. Kisekka, T.H. Marek, J.P. Schneekloth, D. Mitchell Mccallister, V. Sharma, K. Djaman, J. Aguilar, M.E. Schipanski, D.H. Rogers, A. Schlegel

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Irrigated agriculture is a major economic contributor of the High Plains Region and it primarily relies on the High Plains Aquifer as a source of water. Over time, areas of the High Plains Aquifer have experienced drawdowns limiting its ability to supply sufficient water to sustain fully irrigated crop production. This among other reasons, including variable climatic factors and differences in state water policy, has resulted in some areas adopting and practicing deficit irrigation management. Considerable research has been conducted across the High Plains Aquifer region to identify locally appropriate deficit irrigation strategies. This review summarizes and discusses research conducted …

Rubik's Cube: A Visual And Tactile Learning Of Algorithms And Patterns, Lawrence Muller

Open Educational Resources

This is a classroom activity report on teaching algorithms as part of a second course in computer programming. Teaching an algorithm in an introductory level programming class is often a dry task for the instructor and the rewards for the student are abstract. To make the learning of algorithms and software more rewarding, this assignment employs a Rubik’s cube.