Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 6901 - 6930 of 197941

Full-Text Articles in Engineering

Data-Driven Discovery Of Finite-Dimensional Koopman Operator For Modeling And Control Of Uncrewed Ground Vehicles, Ajinkya Joglekar Dec 2025

Data-Driven Discovery Of Finite-Dimensional Koopman Operator For Modeling And Control Of Uncrewed Ground Vehicles, Ajinkya Joglekar

All Dissertations

This dissertation advances data-driven modeling and adaptive control techniques for Uncrewed Ground Vehicles (UGVs), with a focus on autonomy in mission-critical and safety sensitive environments. UGVs are deployed across a wide spectrum of domains, from structured manufacturing shop floors to unstructured off-road terrains, including planetary exploration, precision agriculture, and disaster response. These platforms, operating in dull, dirty, and dangerous conditions, demand autonomy that is both adaptable and robust. While traditional model-based control methods offer interpretability and robustness, they struggle with unmodeled dynamics, parameter variations, and integration of high-dimensional sensing. Conversely, modern machine learning approaches can directly exploit sensory data but …

Go to article

Integrating Dft And Machine Learning To Predict Structural Properties In High Entropy Alloys, Nathan Linton Dec 2025

Integrating Dft And Machine Learning To Predict Structural Properties In High Entropy Alloys, Nathan Linton

All Dissertations

In the past decade, a paradigm shift in the design of metal alloys has been observed. These new alloys are commonly referred to as high entropy alloys (HEAs), multi-principal element alloys (MPEAs), or complex, concentrated alloys (CCAs). In contrast to conventional alloys, which consist of one main element (for example 80%) with other elements in small amounts, HEAs are made of four or more main elements ranging from 5 to 35% each element. Due to the large presence of multiple elements, HEAs have shown substantial material property improvements over conventional alloys such as steel. For example, they have high ductility …

Go to article

Unveiling The Interactions Between The Antibiotic Resistome And Microplastics Influenced By Trace Elements And Ppcps In Wastewater Treatment Plants, Tahira Tasneem Rahman Dec 2025

Unveiling The Interactions Between The Antibiotic Resistome And Microplastics Influenced By Trace Elements And Ppcps In Wastewater Treatment Plants, Tahira Tasneem Rahman

All Graduate Theses and Dissertations, Fall 2023 to Present

Antibiotic resistance is a growing global concern, and wastewater treatment plants play a critical role in controlling its spread. These facilities process water containing microplastics (small plastic particles), trace elements like copper and zinc, and chemicals from everyday products like pharmaceuticals and personal care products. Together, these pollutants may contribute to the survival and spread of bacteria containing antibiotic resistance genes, but their combined effects are not fully understood. This study investigated how these pollutants behave and interact in wastewater treatment plants using two approaches: direct monitoring of real treatment plants and controlled lab experiments using synthetic wastewater. Results showed …

Go to article

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi Dec 2025

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi

All Graduate Theses and Dissertations, Fall 2023 to Present

Advances in water monitoring technologies have led to a large increase in the amount of data collected from rivers, lakes, and other water systems. However, ensuring that these data are accurate and reliable remains a major challenge. Traditional data quality checks are done manually by a technician, which can be slow, inconsistent, and not practical for real-time monitoring. This research addresses these challenges by developing standardized datasets for testing computer-based methods that automatically detect and correct errors in water data. Using information from the Logan River Observatory in northern Utah, we created a step-by-step process to identify, categorize, and label …

Go to article

Cognitive Dynamics In Undergraduate Engineering Education: Effects Of Need For Cognitive Closure And Achievement Goal Orientation On Cognitive Engagement, Zain Ul Abideen Dec 2025

Cognitive Dynamics In Undergraduate Engineering Education: Effects Of Need For Cognitive Closure And Achievement Goal Orientation On Cognitive Engagement, Zain Ul Abideen

All Graduate Theses and Dissertations, Fall 2023 to Present

Cognitive and motivational factors play an important role in students’ engagement during problem-solving, which can lead to academic and professional success. Among these factors, Need for cognitive closure (NFCC) and achievement goal orientation (AGO) have been studied extensively individually, but their interaction and impact on engineering students’ problem-solving is still not explored. NFCC refers to the person’s desire for quick answers, and AGO is the student’s approach to learning and success. This research investigated the impact of NFCC on gender and engineering major, and the relation between NFCC (five facets) and AGO (Mastery, Performance) at their different levels. Additionally, this …

Go to article

Enabling Scalable Camera-Based Streamflow Monitoring With Serverless Cloud Computing, Sajan Neupane Dec 2025

Enabling Scalable Camera-Based Streamflow Monitoring With Serverless Cloud Computing, Sajan Neupane

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis introduces a modern and automated method for monitoring rivers and streams using cameras and cloud-based software tools. Traditional monitoring methods often rely on sensors placed directly in the water, which can be expensive, hard to install, and difficult to maintain, especially in remote or rough terrain. In contrast, this approach uses cameras to observe water flow from a distance, offering a safer and more cost-effective alternative. However, camera systems come with their own challenges, such as collecting large amounts of image data, transferring it reliably from the field, and analyzing it quickly enough to be useful. This research …

Go to article

Design, Control, And Optimization Of Unfolding-Based Ac-Dc Topologies With Three-Port Resonant Converters For Electric Vehicle Battery Charging Applications, Aditya Zade Dec 2025

Design, Control, And Optimization Of Unfolding-Based Ac-Dc Topologies With Three-Port Resonant Converters For Electric Vehicle Battery Charging Applications, Aditya Zade

All Graduate Theses and Dissertations, Fall 2023 to Present

The global effort to reduce greenhouse gas emissions and reliance on fossil fuels has made electric mobility a cornerstone of sustainable transportation. This transition is driving demand for advanced charging infrastructure and more efficient power conversion systems. Power converters play a central role, not only in enabling reliable EV charging but also in integrating renewable energy sources with the grid. Because of the large amount of power involved, these converters must operate efficiently, reliably, and at low cost. Conventional high-power chargers often use two stages of conversion, which are effective but limited by size and energy losses. To overcome these …

Go to article

Quicklime-Based Self-Healing Concrete For Bridge Deck Applications, Mehrnoosh Nazari Dec 2025

Quicklime-Based Self-Healing Concrete For Bridge Deck Applications, Mehrnoosh Nazari

All Graduate Theses and Dissertations, Fall 2023 to Present

Concrete is one of the most widely used construction materials in the world. However, over time, it can crack and deteriorate, especially on roads and bridges exposed to harsh weather and deicing salts. Inspired by the long-lasting durability of ancient Roman concrete, this study explores the self-healing capabilities of concrete incorporating quicklime (calcium oxide) aggregates to extend the service life of bridge decks. For this purpose, three concrete mixtures were developed using local materials: one without quicklime (C-Q 0%) and two with 2% (C-Q 2%) and 4% quicklime (C-Q 4%). These mixtures were tested for fresh properties, strength, durability, and …

Go to article

Biochar As Additive And Modifier In Bitumen And Asphalt Mixtures, Chathurika Dassanayake, Nuha S. Mashaan Dec 2025

Biochar As Additive And Modifier In Bitumen And Asphalt Mixtures, Chathurika Dassanayake, Nuha S. Mashaan

Research outputs 2022 to 2026

Incorporating biochar into pavement materials is a novel and environmentally sustainable approach that aligns with global sustainability goals and advances greener pavement technologies. Studies have shown that biochar significantly enhances the strength, durability, and stability of pavements, while also contributing to sustainability by lowering the carbon footprint associated with traditional construction materials. Additionally, the incorporation of biochar contributes to the sustainability of asphalt engineering by reducing reliance on petroleum-based products and promoting the valorization of biomass. The primary objective of this review is to critically evaluate and synthesize existing research on the use of biochar in bitumen and asphalt mixtures, …

Go to article

Nanao/Organocatalyat Sio2/4-(2-Aminoethyl)-Morpholine As A New, Reusable, And Efficacious Catalyst For The Synthesis Of Polyhydroquinolines Derivatives And Antibacterially Active Evaluation, Leila Amiri-Zirtol, Zahra Karimi, Javad Farahbakhsh, Ahmad Gholami, Seyedeh Narjes Abootalebi Dec 2025

Nanao/Organocatalyat Sio2/4-(2-Aminoethyl)-Morpholine As A New, Reusable, And Efficacious Catalyst For The Synthesis Of Polyhydroquinolines Derivatives And Antibacterially Active Evaluation, Leila Amiri-Zirtol, Zahra Karimi, Javad Farahbakhsh, Ahmad Gholami, Seyedeh Narjes Abootalebi

Research outputs 2022 to 2026

In this study, a new nanocomposite comprising 4-(2-Aminoethyl)-morpholine, an organic catalyst, was prepared on the surface of silica. The absence of metal in the catalyst structure contributes to its environmental friendliness. This novel nanocatalyst was used for multi-component reactions (MCRs). Having a nano size for the composite enhances the contact between the raw materials and the catalytic surface, leading to significant advancement in the reaction. The synthesized composite was identified and evaluated using FT-IR, EDX, EDX-Mapping, TGA, XRD, BET, TEM, and FE-SEM analysis. The characteristic analysis confirmed the synthesis of both nano-silica/4-(2-Aminoethyl)-morpholine catalyst and polyhydroquinoline. The composite’s catalytic properties for …

Go to article

Photocatalytic Performance Of N-Doped Ti3o5 Nano-Catalyst For Phenolic Compounds Removal From Industrial Wastewaters, Mehdi Narimani, Maryam Gonbadi, Mahsa Navabi, Fatemeh Khezri-Shooshtari, Amin Ale Ebrahim, Mohammad Mahdi Zerafat Dec 2025

Photocatalytic Performance Of N-Doped Ti3o5 Nano-Catalyst For Phenolic Compounds Removal From Industrial Wastewaters, Mehdi Narimani, Maryam Gonbadi, Mahsa Navabi, Fatemeh Khezri-Shooshtari, Amin Ale Ebrahim, Mohammad Mahdi Zerafat

Research outputs 2022 to 2026

This study is focused on the synthesis and evaluation of TiO2 and N-doped Ti3O5 for the photocatalytic degradation of phenol as a noxious substance commonly present in the industrial process effluents with harmful effects on human and the environment. The research addresses the critical environmental challenge posed by phenol-contaminated effluents from petrochemical industries. Leveraging Response Surface Methodology with Box-Behnken design, 17 experiments were conducted to analyze the impact of independent variables such as photo-catalyst dosage, pH, and irradiation time on degradation efficiency. Notably, the average crystallite sizes were determined as 20 nm for TiO2 and 58.3 nm for N-doped Ti3O5. …

Go to article

Optimization Of Energy Management In Malaysian Microgrids Using Fuzzy Logic-Based Ems Scheduling Controller, Mohammad Nur-E-Alam, Tarek Abedin, Nur Aini Samsudin, Jana Petrů, Abdulwasa Bakr Barnawi, Manzoore Elahi M. Soudagar, T. M.Yunus Khan, Muhammad Nasir Bashir, Mohammad Aminul Islam, Boon Kar Yap, Tiong Sieh Kiong Dec 2025

Optimization Of Energy Management In Malaysian Microgrids Using Fuzzy Logic-Based Ems Scheduling Controller, Mohammad Nur-E-Alam, Tarek Abedin, Nur Aini Samsudin, Jana Petrů, Abdulwasa Bakr Barnawi, Manzoore Elahi M. Soudagar, T. M.Yunus Khan, Muhammad Nasir Bashir, Mohammad Aminul Islam, Boon Kar Yap, Tiong Sieh Kiong

Research outputs 2022 to 2026

The microgrid (MG) faces significant security issues due to the two-way power and information flow. Integrating an Energy Management System (EMS) to balance energy supply and demand in Malaysian microgrids, this study designs a Fuzzy Logic Controller (FLC) that considers intermittent renewable sources and fluctuating demand patterns. FLC offers a flexible solution to energy scheduling effectively assessed by MATLAB/Simulink simulations. The microgrid consists of PV, battery, grid, and load. A Maximum Power Point Tracking (MPPT) controller helps to extract the maximum PV output and manages the power storage by providing or absorbing excess power. System analysis is performed by observing …

Go to article

Optimization Of Size And Siting Of Distributed Generation In Unbalanced Distribution Systems: A Literature Review, Pema Dorji, Stefan Lachowicz, Octavian Bass Dec 2025

Optimization Of Size And Siting Of Distributed Generation In Unbalanced Distribution Systems: A Literature Review, Pema Dorji, Stefan Lachowicz, Octavian Bass

Research outputs 2022 to 2026

Renewable energy sources (RES) are essential for meeting the rising global electricity demand while reducing greenhouse gas emissions from conventional generation. As traditional systems approach capacity saturation, the integration of RES into power grids becomes increasingly vital. However, the intermittent and variable nature of RES introduces significant technical, economic, and operational challenges. This review focuses on the optimal planning and integration of distributed generation in unbalanced distribution systems, which more accurately reflect real-world power network conditions. Emphasis is placed on siting and sizing strategies aimed at enhancing voltage stability, minimizing power losses, and reducing system costs and emissions. The review …

Go to article

Design Of A Novel Robust Adaptive Fractional-Order Model Predictive Controller For Boost Converter Using Grey Wolf Optimization Algorithm, Chao Peng, Seyyed Morteza [email protected] Ghamari, Hasan Mollaee, Omid Rezaei Dec 2025

Design Of A Novel Robust Adaptive Fractional-Order Model Predictive Controller For Boost Converter Using Grey Wolf Optimization Algorithm, Chao Peng, Seyyed Morteza [email protected] Ghamari, Hasan Mollaee, Omid Rezaei

Research outputs 2022 to 2026

Boost converters play a crucial role in power electronics but present control challenges due to their non-minimum phase behavior and nonlinear dynamics at high switching frequencies. To address these issues, this work proposes a Fractional-order adaptive Model Predictive Control (FO-MPC) framework incorporating Exponential Regressive Least Squares (ERLS) for system identification. Traditional MPC frameworks often rely on accurate mathematical models, which are difficult to obtain in real-world scenarios. This adaptive modelling approach based on ERLS identification method eliminates the need for precise system models, improving robustness and adaptability under parameter variations. Additionally, a FO derivative term enhances damping, stability, and noise …

Go to article

Biopolymer-Based Membranes And Their Application In Per- And Polyfluorinated Substances Removal: Perspective Review, Roham Ghanbari, Ratish Permala, Stefan Iglauer, Masoumeh Zargar Dec 2025

Biopolymer-Based Membranes And Their Application In Per- And Polyfluorinated Substances Removal: Perspective Review, Roham Ghanbari, Ratish Permala, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Over the past 2 decades, per- and polyfluoroalkyl substances (PFAS) have attracted considerable attention due to their widespread occurrence and adverse effects on both the environment and human health. PFAS possess strong carbon‑fluorine bonds that confer exceptional chemical stability and resistance to natural degradation; their fluorinated chains are highly hydrophobic and oleophobic, while their polar functional groups contribute to amphiphilic behavior and water solubility. Certain PFAS thus pose serious risks to living organisms, especially mammals. Membrane filtration is recognized as a particularly effective technique, achieving removal efficiencies greater than 99 % for long-chain-PFAS (including anionic, cationic, and zwitterionic PFAS molecules). …

Go to article

Confinement-Dependent Transient Mi For The Hoek-Brown (H-B) Strength Criterion, Hao Li, Leo Pel, Zhenjiang You, David Smeulders Dec 2025

Confinement-Dependent Transient Mi For The Hoek-Brown (H-B) Strength Criterion, Hao Li, Leo Pel, Zhenjiang You, David Smeulders

Research outputs 2022 to 2026

The growing global demand for mineral resources necessitates deeper excavation, where increasing in situ stresses pose significant geomechanical challenges. Consequently, an accurate strength assessment of deep-seated rock masses is crucial for ensuring the safety and reliability of underground excavations. The Hoek-Brown (H-B) strength criterion remains a widely applied rock strength criterion. However, its conventional form struggles to characterize the full nonlinear evolution of rock strength from pre-critical to critical conditions across varying confining stresses. To address this limitation, this study proposes a Confinement-dependent Transient mi Model (CTM) as an enhancement to the H-B criterion. By incorporating confinement-sensitive variations of mi, …

Go to article

The Microbial Factor In Subsurface Hydrogen Behavior: Implications For Wettability And Interfacial Dynamics, Hamid Esfandyari, Raziallah Jafari Jozani, Aliakbar Hassanpouryouzband, Farhid Hemmatzadeh, Manouchehr Haghighi, Stefan Iglauer, Alireza Keshavarz, Abbas Zeinijahromi Dec 2025

The Microbial Factor In Subsurface Hydrogen Behavior: Implications For Wettability And Interfacial Dynamics, Hamid Esfandyari, Raziallah Jafari Jozani, Aliakbar Hassanpouryouzband, Farhid Hemmatzadeh, Manouchehr Haghighi, Stefan Iglauer, Alireza Keshavarz, Abbas Zeinijahromi

Research outputs 2022 to 2026

Microbial activity plays a significant role in subsurface hydrogen behavior, with implications for underground storage and natural hydrogen systems. This study examines how microbial processes influence the wettability and solid–liquid interfacial characteristics of key subsurface minerals, calcite, dolomite, quartz, and gypsum, in hydrogen-brine-rock systems under realistic subsurface conditions. Wettability directly affects hydrogen distribution, flow dynamics, and trapping, making it a critical factor for both storage and natural recovery applications. Experiments were conducted under high-pressure, high-temperature conditions, with SEM/EDS analysis used to characterize interfacial modifications and mineral surface changes across three scenarios: clean, organic acid-aged, and microbial-aged. Microbial aging consistently increased …

Go to article

A Critical Review On Selecting Performance Evaluation Metrics For Supervised Machine Learning Models In Wastewater Quality Prediction, Hoda Khoshvaght, Ratish Ramyad Permala, Amir Razmjou, Mehdi Khiadani Dec 2025

A Critical Review On Selecting Performance Evaluation Metrics For Supervised Machine Learning Models In Wastewater Quality Prediction, Hoda Khoshvaght, Ratish Ramyad Permala, Amir Razmjou, Mehdi Khiadani

Research outputs 2022 to 2026

While numerous machine learning (ML) models have been applied to wastewater treatment plant (WWTP) quality prediction tasks, significantly less attention has been paid to the selection and interpretation of performance evaluation metrics. Most studies rely on general-purpose regression metrics such as Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and the Coefficient of Determination (R2). Although widely used, these metrics differ considerably in terms of interpretability, sensitivity to data anomalies, and suitability for dynamic, noisy environments like WWTPs. This review, based on a systematic literature analysis of 27 performance evaluation metrics, critically …

Go to article

Enhanced Degradation Of Triclosan Using Aerated Hydrodynamic Cavitation: Turbulence-Based Modelling And Economic Evaluation, Mehdi Khiadani, Ensiyeh Taheri, Veena Bobade, Ali Fatehizadeh Dec 2025

Enhanced Degradation Of Triclosan Using Aerated Hydrodynamic Cavitation: Turbulence-Based Modelling And Economic Evaluation, Mehdi Khiadani, Ensiyeh Taheri, Veena Bobade, Ali Fatehizadeh

Research outputs 2022 to 2026

Pharmaceutical and personal care product (PPCP)-contaminated wastewater, particularly with triclosan (TCS), poses a significant environmental concern due to TCS persistence, ecotoxicity, and endocrine-disrupting effects, necessitating the development of efficient and sustainable remediation technologies. In this study, the degradation of TCS using hydrodynamic cavitation coupled with air injection (aerated HC process) is investigated as a green and chemical-free treatment method for wastewater treatment. Initially, the optimum operating conditions of the standalone HC process were determined by varying the inlet pressure and flow rate, which were found to be 2.34 bar and 0.45 L/s, respectively, corresponding to the highest turbulence frequency level …

Go to article

Design Principles For Customer‑Engaging Digital Service Systems: An Action Research Study, Keng Siau, Xiaofeng Chen, Xin Tan Dec 2025

Design Principles For Customer‑Engaging Digital Service Systems: An Action Research Study, Keng Siau, Xiaofeng Chen, Xin Tan

Research Collection School Of Computing and Information Systems

Digital services represent a business approach employed by organizations to operate in the digital environment. However, systematic development guidelines for developing quality digital service systems are lacking in the literature. The authors identified four general challenges for developing and implementing customer-engaging digital service systems (CEDSS). By employing the method of canonical action research in a digital service system project, they derived 10 design principles for developing high-quality CEDSS. They empirically evaluated the design principles in the development project and through follow-up focus group sessions. The design principles provide applicable and actionable guidelines for the development of CEDSS.

Go to article

Optimizing Zeolite Catalysts For Efficient Ldpe Plastic Waste Pyrolysis, Hilda Porawati, Mazwan Mazwan, Sukadi Sukadi Nov 2025

Optimizing Zeolite Catalysts For Efficient Ldpe Plastic Waste Pyrolysis, Hilda Porawati, Mazwan Mazwan, Sukadi Sukadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The problem of plastic waste, particularly from low-density polyethylene (LDPE) plastic bags, poses a significant challenge in environmental management due to its non-biodegradable nature and widespread use in daily life. This study evaluates the influence of catalyst types on the characteristics and energy efficiency of liquid fuel products produced from LDPE waste pyrolysis. The three treatments compared were no catalysts, natural zeolite catalyst, and synthetic zeolite catalysts, each subjected to three different temperature variations: 250°C, 300°C, and 350°C. The observed parameters in this study were volume, product mass, cetane index, density, sulfur content, viscosity, flash point, calorific value, and energy …

Go to article

The Impact Of Pine Resin-Epoxy Ratios On Fire Resistance And Acoustic Performance Of Banana Fiber Composites, Cokorda Istri Putri Kusuma Kencanawati, Dewa Ngakan Ketut Putra Negara, I Gede Andy Andika Parahita Nov 2025

The Impact Of Pine Resin-Epoxy Ratios On Fire Resistance And Acoustic Performance Of Banana Fiber Composites, Cokorda Istri Putri Kusuma Kencanawati, Dewa Ngakan Ketut Putra Negara, I Gede Andy Andika Parahita

Journal of Mechanical Engineering Science and Technology (JMEST)

Because of their low environmental impact and biodegradability, composite materials derived from natural fibers and resins have drawn interest as sustainable substitutes for synthetic materials in thermal and acoustic applications. Two promising natural components are banana stem fiber and pine resin, but they need to be modified due to their mechanical limitations and flammability. Epoxy resin is commonly used to enhance structural performance; however, its effects on acoustic and fire resistance properties require further investigation. This study examined how different epoxy resin contents affected the sound absorption and fire resistance of composites made from banana stem fiber and pine resin. …

Go to article

Simulation Of Stress, Deformation, And Vibration In Unlubricated Ball Bearings At Varying Rotational Speeds, Billy Dwiki, Moh. Hartono Nov 2025

Simulation Of Stress, Deformation, And Vibration In Unlubricated Ball Bearings At Varying Rotational Speeds, Billy Dwiki, Moh. Hartono

Journal of Mechanical Engineering Science and Technology (JMEST)

Bearings are critical components in rotating machinery, and their performance is highly influenced by operational factors such as rotational speed, load, and lubrication. This study aims to analyze the deformation, stress, and dynamic behavior of SAE 52100 bearings under dry operating conditions at various rotational speeds, as well as to propose mitigation strategies for high-speed industrial applications. A finite element simulation was conducted using ANSYS R19.2 to evaluate the total deformation, equivalent elastic strain, Von Mises stress, and vibrational characteristics of a 6204-type SAE 52100 bearing. The simulations were performed across a speed range of 600 to 2000 RPM under …

Go to article

Numerical Investigation Of Ethanol-Enriched Diesel And Biodiesel Fuels In A Diesel Engine, Annisa Bhikuning, Hezron Elyakim Potto, Sandi Apriandi Setiawan, Jamal F. Jati Nov 2025

Numerical Investigation Of Ethanol-Enriched Diesel And Biodiesel Fuels In A Diesel Engine, Annisa Bhikuning, Hezron Elyakim Potto, Sandi Apriandi Setiawan, Jamal F. Jati

Journal of Mechanical Engineering Science and Technology (JMEST)

This study explores the effects of ethanol blending on the performance and emissions of a compression ignition (CI) engine using both diesel and biodiesel as base fuels. Motivated by increasing environmental concerns regarding pollutant emissions from conventional diesel engines, ethanol was introduced as an oxygenated additive to improve combustion characteristics and reduce the formation of harmful exhaust emissions. Ethanol’s high oxygen content promotes more complete combustion, potentially lowering carbon-based emissions such as carbon monoxide (CO), particulate matter (PM), and unburned hydrocarbons. In this study, performance and emission parameters were simulated using Diesel-RK software at various engine speeds of 1500, 2000, …

Go to article

One-Way Thermal-Fluid-Solid Coupling Analysis Of Helicopter Tail Reducer With Spiral Bevel Gear, Dongping Sheng, Zhongyuan Ma, Chenqi Zhou, Haidong Feng, Hun Guo, Chun Su Nov 2025

One-Way Thermal-Fluid-Solid Coupling Analysis Of Helicopter Tail Reducer With Spiral Bevel Gear, Dongping Sheng, Zhongyuan Ma, Chenqi Zhou, Haidong Feng, Hun Guo, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

This research focuses on investigating the thermal-fluid-solid coupling behavior within spiral bevel gears to enhance the bearing capacity and extend the operational service life of the gear reducer located in the helicopter tail gearbox. The study commences by constructing detailed, parametrically defined threedimensional digital models. These models accurately represent the critical components: the spiral bevel gear itself, the surrounding gearbox housing, and the supporting gear shaft, based directly on the specifications of an actual helicopter tail reducer assembly. Subsequently, the analysis proceeds with a one-way, steadystate thermal-solid coupling simulation performed on the established model assembly. This critical simulation phase aims …

Go to article

The Effect Of Preheater On Heat And Mass Transfer Efficiency Using Rotating Drum Roaster, Melisa Surya Andini, Retno Wulandari, Heru Suryanto Nov 2025

The Effect Of Preheater On Heat And Mass Transfer Efficiency Using Rotating Drum Roaster, Melisa Surya Andini, Retno Wulandari, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is the third-largest coffee producer globally, facing challenges including rising raw material costs, increased energy consumption, and unpredictable weather conditions. One potential solution is optimizing energy efficiency during roasting. This study investigates the effect of preheating on time and energy efficiency in heat and mass transfer by utilizing waste heat to preheat green Robusta coffee beans. The experiment was conducted on a laboratory scale using a rotating drum roaster with a double-layer drum made of stainless steel and clay, at 200 °C under atmospheric pressure. Two treatments were applied: roasting with a preheater and without, each repeated three times …

Go to article

Spray Angle On The Performance Of Split-Type Ac Condenser Installed On Concrete Rooftop In Tropical Climate, Kennedy Kennedy, I N Frenki Aryana, Basri Basri Nov 2025

Spray Angle On The Performance Of Split-Type Ac Condenser Installed On Concrete Rooftop In Tropical Climate, Kennedy Kennedy, I N Frenki Aryana, Basri Basri

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigated the influence of different water spray angles (0°, 15°, and 30°) on the thermal and energy performance of a split-type air-conditioning (AC) condenser installed on a concrete rooftop in a tropical climate. An experimental setup was designed to replicate actual concrete rooftop conditions, focusing on the condenser inlet temperature, compressor power consumption, and system coefficient of performance (COP). A 6-minute ON and 6-minute OFF intermittent spray cycle was employed to optimise water usage and minimise excessive humidity. Experimental measurements were conducted on a 9,000 Btu/h split-type unit equipped with a nozzle system connected to a 200 L …

Go to article

Effect Of Argon Gas Flow Rate On Crystal Structure, Morphology, And Optical Properties Of Cigs Film For Photodetector Applications, Nurul Lathi’I Fatul Chamidah, Fadilah Wulan Cahyani, I Gusti Ayu Isnaini Fatha Ramadhani, Erma Surya Yuliana, Nasikhudin Nasikhudin, Safwan Abd. Aziz, Nandang Mufti Nov 2025

Effect Of Argon Gas Flow Rate On Crystal Structure, Morphology, And Optical Properties Of Cigs Film For Photodetector Applications, Nurul Lathi’I Fatul Chamidah, Fadilah Wulan Cahyani, I Gusti Ayu Isnaini Fatha Ramadhani, Erma Surya Yuliana, Nasikhudin Nasikhudin, Safwan Abd. Aziz, Nandang Mufti

Journal of Mechanical Engineering Science and Technology (JMEST)

CIGS material can be used as a material for photodetector applications. The deposition of CIGS thin films remains challenging. Generally, argon is used as a gas to bombard the CIGS material through the sputtering method. This study fabricated photodetectors by varying the argon gas flow rate (50-80 sccm) to investigate its effect on device performance. XRD, SEM, UV-Vis, and photoresponse tests were characterized. Structural analysis using XRD showed a weak (112) diffraction peak, indicating that the resulting film was not fully crystalline, but rather consisted of a nanocrystalline phase, even partly amorphous, with small crystallite sizes. According to the SEM …

Go to article

Numerical Analysis Of The Effect Of Vortex Generator On The Aerodynamic Performance Of Naca 6412 Airfoils Using Large Eddy Simulation, Dedet Hermawan Setiabudi, Joan Bayuaji Nugroho, Eli Kumolosari, Lazuardy Rahendra Pinandhita, Okto Dinaryanto Nov 2025

Numerical Analysis Of The Effect Of Vortex Generator On The Aerodynamic Performance Of Naca 6412 Airfoils Using Large Eddy Simulation, Dedet Hermawan Setiabudi, Joan Bayuaji Nugroho, Eli Kumolosari, Lazuardy Rahendra Pinandhita, Okto Dinaryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Aerodynamic performance of an airfoil is significantly affected by flow separation, especially at high angles of attack. One common strategy to control flow separation is adding a triangular vortex generator (VG), which creates small vortices that help keep the airflow attached. The present study investigated the impact of triangular vortex generators on a NACA 6412 airfoil using Computational Fluid Dynamics (CFD) method. Large Eddy Simulation (LES) was applied due to its ability to show the vortices more clearly than other methods. It can also accurately capture the flow separation. To obtain the lift, drag, and lift-to-drag ratio (CL/CD) data, four …

Go to article

The Effect Of Heat Treatment Duration On The Psychochemical, Mechanical, And Biodegradability Of Polyvinyl Alcohol/Gambir Extract Biocomposite Films, Ainul Kahfi Muhlasin, Poppy Puspitasari, Heru Suryanto, Diki Dwi Pramono, Dieter Rahmadiawan, Billie Jack Pasion Nov 2025

The Effect Of Heat Treatment Duration On The Psychochemical, Mechanical, And Biodegradability Of Polyvinyl Alcohol/Gambir Extract Biocomposite Films, Ainul Kahfi Muhlasin, Poppy Puspitasari, Heru Suryanto, Diki Dwi Pramono, Dieter Rahmadiawan, Billie Jack Pasion

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigates PVA-based films with the addition of gambir and heat treatment to improve the characteristics of the film. Methods include the synthesis of PVA film with gambir addition (0.5%), treated by heat treatment for 40 minutes and 60 minutes. The film was characterised by physicochemical, mechanical properties, and biodegradability. Data was analyzed using ANOVA with a significance of 95%. Results indicate that the surface of PVA/gambir films is smoother and more homogeneous as the heat treatment duration increases. New peaks of functional groups were identified after the addition of gambir at the C-C and C-O groups. After heat …

Go to article

First Prev Next Last