Engineering Commons^™

A Mixed Method Study On The Impact Of Industry Sponsored Projects On Senior Capstone Design Student’S Motivational Factors, Devanshi Shah

Theses and Dissertations

This thesis examines the change in student motivation through a yearlong senior capstone design course with respect to their choice of project type. The senior capstone design projects offered at the university fall into one of two major project types: industry sponsored and nonindustry sponsored. The students opt for either of the two major project types based on their interest and future career goals. The students were given an adapted version of Motivated Strategies for Learning Questionnaire (MSLQ) to self-identify their motivation levels by rating various questions on a 7-point Likert scale. The surveys were conducted at two different points …

Airport Taxiway Traversal And Safety Optimization Using Combinatorics, Thore Groenlund Rasmussen

Theses and Dissertations

The demand for air travel has increased dramatically in the last decade, putting large strain on airports and their limited resources. Expanding the available resources at an airport is not always an option either due to location, budget or time. This forces the administrators of an airport system to use the limited resources as efficiently as possible. This thesis proposes a tool for air traffic controllers and pilots that can be used when planning taxiway systems. Taking inspiration from Dijkstra’s Algorithm, an algorithm is proposed to safely move aircraft from the terminal to the runway. Applying constraints to the algorithm …

Experimental And Numerical Analysis Of The Drag Force On Surfboards With Different Shapes, Omar Lahlou

Theses and Dissertations

The aim of the present study is to define the hydrodynamic resistance of surfboards with different designs. Decreasing the drag acting on a board helps the surfer to attain higher surfing performances. It helps to attain higher speeds and maneuvering for the surfer. In this thesis, theoretical, experimental and computational approaches are used to explain how the drag changes with different surfboard shapes. Four surfboards with varying shapes were towed at different speeds and the resulting force was recorded. Two computational models were developed using Star CCM and Flowsquare to confirm the experimental results. The drag force on the boards …

Calibration Of The Rapidscat Microwave Brightness Temperature, Ali Al-Sabbagh

Theses and Dissertations

NASA RapidScat is the first satellite scatterometer that flown in non-Sun-synchronous orbit. Its unique orbit enabled collocated measurements with multiple satellite remote-sensing instruments that usually fly in Sun-synchronous orbits. RapidScat’s primary mission was retrieval of global ocean wind vectors from normalized radar backscatter measurements. The instrument operated onboard the International Space Station between September 2014 and August 2016 covering latitude range between ±51.6ᵒ . To serve as a cross-calibration reference with other instruments, RapidScat must be internally calibrated. This dissertation presents the first radiometric calibration of RapidScat brightness temperature measurements and describes the process that combines RapidScat’s active/passive mode, simultaneously …

A Sensor Fusion And Machine Learning Approach For Predicting Signal Power Path Loss In Wireless Communications, Yunus Egi

Theses and Dissertations

When it comes to Wireless Communication systems and their optimization in different environments, estimation of SPPL for different terrain models becomes one of the most tedious problems for Radio Frequency engineers. Since every terrain has their complex terrain structures and contains micro-variations, they end up with an ambiguous SPPL via scattering and absorption. Also, modern SPPL prediction models are error free since they use predefined estimation parameters for classified terrain model. Sometimes, terrain-related estimation errors may cause over undesirable SPPL level which is much larger than 5% tolerance error. To avoid this problem, one can benefit from 3D map of …

Open Source Completely 3-D Printable Centrifuge, Salil S. Sule, Aliaksei Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, the costs of the former and the required electricity to operate the latter limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified, and reliable lab-scale centrifuges. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class (self-replicating rapid prototyper) fused filament fabrication (FFF)- or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open …

Space Image Processing And Orbit Estimation Using Small Aperture Optical Systems, David Zuehlke

Doctoral Dissertations and Master's Theses

Angles-only initial orbit determination (AIOD) methods have been used to find the orbit of satellites since the beginning of the Space Race. Given the ever increasing number of objects in orbit today, the need for accurate space situational awareness (SSA) data has never been greater. Small aperture (< 0:5m) optical systems, increasingly popular in both amateur and professional circles, provide an inexpensive source of such data. However, utilizing these types of systems requires understanding their limits. This research uses a combination of image processing techniques and orbit estimation algorithms to evaluate the limits and improve the resulting orbit solution obtained using small aperture systems. Characterization of noise from physical, electronic, and digital sources leads to a better understanding of reducing noise in the images used to provide the best solution possible. Given multiple measurements, choosing the best images for use is a non-trivial process and often results in trying all combinations. In an effort to help autonomize the process, a novel “observability metric” using only information from the captured images was shown empirically as a method of choosing the best observations. A method of identifying resident space objects (RSOs) in a single image using a gradient based search algorithm was developed and tested on actual space imagery captured with a small aperture optical system. The algorithm was shown to correctly identify candidate RSOs in a variety of observational scenarios.

An Evaluation Of Wastewater Pumping Station Facilities Using Statistical Techniques In Analyzing Each For Rehabilitation Design And To Improve The Adverse Environmental Affects, Zenaida S. Guerrero

Theses and Dissertations

The objective of this research project is to develop two evaluation models, one using excel to provide a design criterion for wastewater pumping stations in collecting design parameters and information effecting efficiency and performance of the pumps. Secondly, to develop a linear regression model for these parameters giving a correlation between dependent and independent variables to verify adverse environmental aspects. This study is based in the City of Weslaco, pertaining to the north waste watershed. The parameters collected are age, efficiency, service area, total dynamic head, existing conditions, monthly sanitary sewer over flow work orders, precipitation data, population by service …

Design Of A Bedside Walker-Cane Hybrid To Aid Senior Adults Avoid Falls During Night Walks, Jorge L. Gutierrez

Theses and Dissertations

The objective of this research and development work is to design a device to help senior adults prevent fall during night walks indoors. The problem of elders falling at a night setting was found to be caused by the multiple environmental and medical conditions. The target demographic was found to be seniors from age 65 and older. Several occupational therapists and two physical therapists were consulted to gain knowledge on elders' behavior, possible improvements on current existing devices, and feedback regarding the early prototype built. Several products and patents were researched with a lack of findings on similar products that …

Biomechanics Of Lower Limb During The Golf Swing Using Opensim Modeling, Andrew B. Butler

Theses and Dissertations

The purpose of this research is to investigate the biomechanics of the lower-limb using an inverse dynamics model. Experimental data, recorded by an integrated Motion Analysis – Force Plate System in the UTRGV Biomechanics Laboratory, is used to determine ground reaction forces and marker trajectories. OpenSim, a graphical musculoskeletal and computational platform, is used to model the body in three dimensions. The human body is modeled as a 12-segment linkage, consisting of 23 degrees-of-freedom and 92 muscles. The experimental data for the Biomechanics Laboratory is imported in OpenSim. Then, joint angles, generalized coordinates & accelerations of lower-limb segments, muscle forces, …

Experimental Study Of Condensation In Different 3d Printed Regenerators In A Thermoacoustic Cooler, Aibek Bekkulov

Theses and Dissertations

Thermoacoustics (TA) deals with the conversion of heat into sound and vice versa. Device that converts heat into acoustic work is called TA heat engine, while the device that transfers energy from a low temperature reservoir to a high temperature one by utilizing acoustic work is called TA cooler. A simple construction of TA cooler includes an acoustic speaker, a resonator tube and a regenerator stack in which the temperature gradient is being imposed. Such a TA cooler has several advantages over traditional compression/expansion cooling machine such as its simplicity of the construction, high reliability and lack of toxic refrigerants. …

Dehumidification Water Quality Analysis Of The South Texas Gulf Of Mexico, Erik Esteban Castillo

Theses and Dissertations

This project is to introduce a new methodology for environmental research that analyzes humidity from a water treatment perspective. This is done by using a household dehumidifier, which extracts the excess humidity in a given space, to harvest the samples. The dehumidifier was used outside to act as an Atmospheric Water Generator (AWG), which is the process of extracting water from the atmosphere. When AWG is placed near shoreline, then it's classified as a Desalinated Atmospheric Water Generator (DAWG) since it extracts distilled seawater water-vapors. The methodology for DAWG analyzed turbidity in the humidity on SPI, indicating to meet {<.15} TCEQ turbidity water quality standard. The turbidity also showed to have an adverse relation to weather conditions. There is an open market in research on this topic, where the methodology for DAWG can offer answers. This project identifies DAWG as being a sustainable source of potable water for a municipality.

Development Of Flexible Photo-Mechanoluminescent Polymeric Based Systems, Carlos Hernandez

Theses and Dissertations

The project focuses on the creation of nanofiber systems with enhanced photo-mechanoluminescent response and high mechanical flexibility to further enhance promising optical applications. Lanthanide-Polyvinyl Di-Fluoride fiber systems were created using centrifugal spinning and characterized using SEM, FTIR, XPS, DSC, XRD, and PL. Fibers luminescence response was gotten when induced by ultraviolet light and the application of an impact force.

Security Assessment Of Select Computer Systems Under Distributed Denial Of Service Attacks Performed By Botnets, Hugo Armando Herrera Martinez

Theses and Dissertations

With the passage of time Internet connectivity has been found on more electronic devices than in previous decades. This continuous development may be perceived as a double-edged sword. While the world becomes more Internet-connected and quality of life increases, the lack of proper security protocols in some of these electronic devices permits illegitimate parties to take control of them for their own malicious purposes.

This thesis studies the impact of compromised Internet-connected devices on commonly used server operating systems: Microsoft’s Windows Server 2012 R2 Datacenter, Windows Server 2016 Datacenter, and Apple’s macOS 10.13.6 High Sierra deployed on Apple’s Mac Pro …

Polymeric Pvdf Fibers For Piezoelectric Applications In Energy Harvesting, Misael E. Martinez

Theses and Dissertations

This work focuses on developing and characterizing the piezoelectric response of Cerium doped Polyvinylidene Fluoride (PVDF) fine fibers and the effects of dopants and alignment on the formation of the β-phase and consequently on the piezoelectric performance. Six sets of fiber mats were prepared varying the concentration (2.5–7.5wt%) of Cerium (III) Nitrate-Hexahydrate and Ammonium-Cerium (IV) Sulfate-Dihydrate. Fiber mats were developed using the Forcespinning® technique and the angular velocity and dopant concentration were adjusted to obtain a synergy between fiber yield and fiber diameter. Fourier Transform Infrared Spectroscopy showed a significant enhancement in the PVDF β-phase and inhibition of the non-polar …

Blockchain Technology Based Supply Chain Systems And Supply Chain Performance: A Resource-Based View, Madhavi Latha Nandi

Theses and Dissertations

Blockchain technology (BCT) is set to transform firms’ present ways of managing supply chains. This thesis explores how the efforts by firms to integrate BCT into their supply chain systems and activities, can enable certain supply chain capabilities and subsequently, improve supply chain performance. Using an abductive research approach, qualitative content analyses of 126 cases of firms’ efforts in BCT-based supply chain systems (BCT-SCS) across multiple industries are conducted to identify the BCT-enabled supply chain capabilities and their performance outcomes. Findings reveal that the present BCT-SCS efforts are mainly oriented towards improving the operational-level capabilities namely, information sharing and coordination …

Compliance Of Open Source Ehr Applications With Hipaa And Onc Security And Privacy Requirements, Maryam Farhadi, Hisham Haddad, Hossain Shahriar

Master of Science in Computer Science Theses

Electronic Health Records (EHRs) are digital versions of paper-based patient's health information. EHR applications are increasingly being adopted in many countries. They have resulted in improved quality in healthcare, convenient access to histories of patient medication and clinic visits, easier follow up of patient treatment plans, and precise medical decision-making process. EHR applications are guided by measures of the Health Insurance Portability and Accountability Act (HIPAA) to ensure confidentiality, integrity, and availability. However, there have been reported breaches of Protected Health Identifier (PHI) data stored by EHR applications. In many reported breaches, improper use of EHRs has resulted in disclosure …

Bs News May/June

Building Services Engineering

No abstract provided.

The Eco-Smart Can V2.0, Darack B. Nanto

Electronic Theses and Dissertations

On a scorching summer day in 2015, a campus maintenance worker was observed emptying a trash bin. Upon closer observation, it was noted that the bin was not full; in fact, it was less than one third full. There were other bins that were full and needed to be emptied urgently. It was confusing and problematic to see that bins that needed more attention were not prioritized. After extended research, it was found that maintenance operates on daily routes to pick up trash at designated times, regardless of the level of trash in the bins. Therefore, to tackle this issue, …

The Use Of Generic Scripting In Certain Application Development Projects, Vance Allen Etnyre, Jian Denny Lin, Nanfei Sun

Journal of International Technology and Information Management

This article discusses generic scripting, a useful scripting technology for developing applications. In its simplest use, generic scripting can be used as a documentation tool to replace flowcharting or pseudocode. in certain situations, generic scripting can lead directly to a working application without the need to write, compile and test a new program. Generic scripting is discussed as a tool which can be used in logical design, detailed design and implementation of a new application. An example is presented to show how generic scripting can be used by non-programmers to simplify the development of applications. This example is used to …

College Choice Criteria Utilizing Conjoint Analysis Enabled On A Saas Platform, Alison Munsch

Journal of International Technology and Information Management

College enrollments and low to moderate household incomes are stagnating while tuition costs are increasing. The New York State Legislature enacted the nation’s first tuition-free degree program, the Excelsior Scholarship, designed to make a college education more affordable to middle class families. This legislation can impact what institution of higher education students will choose upon high school graduation. In order to understand the choice criteria for selecting an institution of higher education, a research study was conducted among a representative sample of high school upper classmen and parents of this respondent segment. The data collection and analysis were accomplished using …

Field Evidence Of A Natural Capillary Barrier In A Gravel Alluvial Aquifer, Todd Halihan, Ronald B. Miller, David Correll, Derek M. Heeren, Garey A. Fox

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Ozark streams commonly feature “composite” floodplains, in which the vadose zone consists of silt or silt loam soils (?1 m thick) overlying gravel subsoil. Previous work has shown that preferential flow paths can exist within the gravel subsoil, which can conduct water and P at rates exceeding the sorption capacity of the gravel. At a site on Barren Fork Creek, a 1- by 1-m infiltration plot was constructed and an infiltration experiment was performed using sequentially introduced solutes including P (the constituent of regulatory interest), Rhodamine-WT (Rh-WT, a visual tracer), and Cl− (an electrical tracer). The solute transport was measured …

Simultaneous Estimation Of Ocean Tides And Underwater Topography In The Weddell Sea, Edward D. Zaron

Civil and Environmental Engineering Faculty Publications and Presentations

A new model for theM2, S2, K1, and O1 tides in the Weddell Sea is developed by assimilating CryoSat-2 data into a barotropic tide model. A variational approach is used, which explicitly allows for errors in the water depth, that is, the bottom topography in open water and the water column thickness under floating ice shelves, so that an optimized estimate of the topography is obtained together with the tidal fields. In preparation for assimilation, the sensitivity of the tidal elevation to the interfacial drag at the sea floor and the ice-water interface (under the floating ice shelves) is investigated; …

A Machine Learning Approach To Network Intrusion Detection System Using K Nearest Neighbor And Random Forest, Ilemona S. Atawodi

Master's Theses

The evolving area of cybersecurity presents a dynamic battlefield for cyber criminals and security experts. Intrusions have now become a major concern in the cyberspace. Different methods are employed in tackling these threats, but there has been a need now more than ever to updating the traditional methods from rudimentary approaches such as manually updated blacklists and whitelists. Another method involves manually creating rules, this is usually one of the most common methods to date.

A lot of similar research that involves incorporating machine learning and artificial intelligence into both host and network-based intrusion systems recently. Doing this originally presented …

Micro-Ct-Based Approaches For Quantifying The Morphology Of Pulverized Char Particles, Scott Jorgensen, Simcha L. Singer

Mechanical Engineering Faculty Research and Publications

Morphological analysis of pulverized coal char particles using two-dimensional (2-D) cross-sectional imaging has been widely employed, but its accuracy has not been adequately assessed. In this study, pulverized coal char particles are imaged in three dimensions (3-D) using high-resolution X-ray microcomputed tomography (micro-CT). Particle volume, macropore volume, and macroporosity are measured in three dimensions and analyzed as a function of distance from the particle center using averaging at each radial location. A technique for extracting each particle’s average wall thickness, another morphological parameter used for classification, is also presented based on micro-CT imaging. When applied to pulverized bituminous coal char …

A Method For The Measurement Of The Latency Tolerance Range Of Western Musicians, Jorge Medina Victoria

PhDs

This thesis presents a new systematic method to measure the ability of western musicians to cope with latency. The core of the method is a listening test and the development of a measure. The viability of the method is statistically tested with an empirical observation of 31 test subjects performing on 17 different musical instruments.

The primary goal of the investigation is the development of a systematic, reliable and replicable method that can be applied to different western music instruments, in order to provide data for analysis on latency issues while performing music in non-collaborative performances. In addition, a measure …

Incentivizing Cyber Security Investment In The Power Sector Using An Extended Cyber Insurance Framework, Jack P. Rosson, Mason J. Rice, Juan Lopez Jr., R. David Fass

Faculty Publications

Collaboration between the DHS Cybersecurity and Infrastructure Security Agency (CISA) and public-sector partners has revealed that a dearth of cyber-incident data combined with the unpredictability of cyber attacks have contributed to a shortfall in first-party cyber insurance protection in the critical infrastructure community. This research explores the foundations of insurance theory and adopts behavioral manipulation methods to incentivize cyber-security investment. We validate the model by applying power industry performance data from 2013-2015 to assess risk facing the industry. Results show that the model can successfully discriminate between individual power companies as well as geographic regions on the basis of risk …

Aviation Safety Action Program In The United States Air Force: Mobility Aircrews’ Intentions To Use Safety Reporting, Travis Jared Whittemore

Doctoral Dissertations and Master's Theses

No abstract provided.

2019 Spring Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for spring 2019. Includes photographs, upcoming events, recent publications, and student profiles.

Community Discovery In Heterogeneous Social Networks, Lei Meng, Ah-Hwee Tan, Donald C. Wunsch

Research Collection School Of Computing and Information Systems

Discovering social communities of web users through clustering analysis of heterogeneous link associations has drawn much attention. However, existing approaches typically require the number of clusters a priori, do not address the weighting problem for fusing heterogeneous types of links, and have a heavy computational cost. This chapter studies the commonly used social links of users and explores the feasibility of the proposed heterogeneous data co-clustering algorithm GHF-ART, as introduced in Sect. 3.6, for discovering user communities in social networks. Contrary to the existing algorithms proposed for this task, GHF-ART performs real-time matching of patterns and one-pass learning, which guarantees …