Engineering Commons^™

Impact Of Oxygen Plasma Treatment On Carrier Transport And Molecular Adsorption In Graphene, Hongmei Li, Austin Singh, Ferhat Bayram, Anthony S. Childress, Apparao Rao, Goutam Koley

Publications

Impact of plasma treatment on graphene's transport properties and interaction with gas molecules has been investigated with Raman, X-ray photoelectron spectroscopy, and Hall measurements. Experimental results indicate the formation of nanocrystalline domains and the enhanced fraction of adsorbed oxygen following oxygen plasma treatment, which correlates with a significant reduction in carrier mobility and an increase in carrier density. The oxygen plasma treated graphene was found to exhibit much stronger sensitivity toward NH3 molecules both in terms of magnitude and response rate, attributable to increased domain edges and oxygen adsorption related enhancement in p-type doping. The carrier mobility in plasma exposed …

Effects On Strength And Corrosive Characteristics Of Hardened Cement Paste Using Rice Husk And Sugarcane Bagasse, Travis D. Garrett

Master's Theses

Cement is one of the most used building materials in the world. The production of ordinary Portland cement contributes to the release of harmful greenhouse gasses. In an effort to reduce these emissions, different materials are being evaluated for their use as partial replacements for ordinary Portland cement. Rice husk and sugarcane bagasse are agricultural waste products and large amounts of these are currently landfilled, making them inexpensive and available. When combusted at high temperatures they form rice husk ash and sugarcane bagasse ash that have pozzolanic characteristics. The high silicon dioxide in these products makes them good options to …

Total Fume Emissions And Emission Factors Applicable To Gas Metal Arc Welding, Nayara De Souza

LSU New Orleans Theses and Dissertations

Welding is a common industrial practice that has the potential to emit air pollutants. Emission factors are useful indicators to help in the understanding of the extent of pollution from a process and managing them to reduce or minimize health impacts. The objective of this thesis is to determine emission factors applicable to the gas metal arc welding (GMAW), under varying current and voltage conditions. The most used base metals and an electrode for the shipbuilding industry were considered. A weld fume chamber was used to achieve the project goals along with standard sampling and analytical procedures. Three test runs …

Geotechnical And Geothermal Properties Of Louisiana Coastal Sediments, Myriam Bou-Mekhayel

LSU New Orleans Theses and Dissertations

Land loss in South Louisiana is increasing at a fairly rapid rate. In an effort to reduce land loss and save the marshes of Louisiana, marsh creation projects have been proposed in carefully selected regions around the coast as part of the CPRA Coastal Master Plan 2017. Properties and characteristics of the soil obtained from soil borings were analyzed and used to determine the various design parameters that allow the marsh creation process to occur. Other properties that were taken into consideration for Louisiana coastal sediment are the geothermal properties.

This research analyses those different properties obtained from geotechnical reports …

Directional Comparison Bus Protection Using Superimposed Partial Operating Current Characteristics, Bishwas Baral

LSU New Orleans Theses and Dissertations

Various directional comparison bus protection methods including widely used superimposed directional element method need to have both voltages and currents from all feeders connected to the zone of protection to find the direction of current for detecting a bus fault or a line fault. The purpose of the thesis is to present a new technique for directional comparison bus protection to discriminate a bus fault from line fault and normal condition. The new technique, which is implementing superimposed directional element method to modify partial operating current characteristics (POC) method to superimposed POC (SPOC) method, does not use voltages from feeders, …

Evaluation Of Total Fume And Heavy Metal Emission Factors Applicable To Gas Metal Arc Welding, Abhinay Jilla

LSU New Orleans Theses and Dissertations

Welding is a metal joining process widely used in many manufacturing facilities around the world. It involves the process of heating the base and filler metals to a high temperature that leads to the formation of fumes. Welding emissions consist of gaseous pollutants and micron and sub-micron particles consisting of different heavy metals. Health risks associated with exposures to weld fume is well recognized in the literature. This research evaluates emissions and emission factors applicable to gas metal arc welding (GMAW) on AH 36 (mild steel) and 316 L (stainless steel). Emission factors evaluated consisted, total fume, chromium, cobalt, lead, …

Detection Of Sand Boils From Images Using Machine Learning Approaches, Aditi S. Kuchi

LSU New Orleans Theses and Dissertations

Levees provide protection for vast amounts of commercial and residential properties. However, these structures degrade over time, due to the impact of severe weather, sand boils, subsidence of land, seepage, etc. In this research, we focus on detecting sand boils. Sand boils occur when water under pressure wells up to the surface through a bed of sand. These make levees especially vulnerable. Object detection is a good approach to confirm the presence of sand boils from satellite or drone imagery, which can be utilized to assist in the automated levee monitoring methodology. Since sand boils have distinct features, applying object …

Scalable Community Detection Using Distributed Louvain Algorithm, Naw Safrin Sattar

LSU New Orleans Theses and Dissertations

Community detection (or clustering) in large-scale graph is an important problem in graph mining. Communities reveal interesting characteristics of a network. Louvain is an efficient sequential algorithm but fails to scale emerging large-scale data. Developing distributed-memory parallel algorithms is challenging because of inter-process communication and load-balancing issues. In this work, we design a shared memory-based algorithm using OpenMP, which shows a 4-fold speedup but is limited to available physical cores. Our second algorithm is an MPI-based parallel algorithm that scales to a moderate number of processors. We also implement a hybrid algorithm combining both. Finally, we incorporate dynamic load-balancing in …

Proposed New Military Live Load For Highway Bridges In The United States, Walter P. Parker

LSU New Orleans Theses and Dissertations

This thesis presents the results of a mathematical analysis of various live load combinations on highway bridge spans up to 304.8 meters (1,000 feet) total lengths. The analysis included continuous beams, but only the results for simple beams is presented. The analysis was performed using an independently developed Microsoft EXCEL spreadsheet computation, based on superposition and classical mechanics.

In this thesis, several actual bridge live loadings and several hypothetical live loadings were analyzed and compared to the American Association of State Highway and Transportation Officials Load and Resistance Factor Design method. Also considered was the new bridge design method adopted …

Using Thermal Gradient Measurements To Compare Bath Temperature And Agitation Effects On The Quenching Performance Of Palm Oil, Canola Oil And A Conventional Petroleum Oil, Bozidar Matijevic, Bruno F. Canale, Božidar Lišcic, George Totten

Mechanical and Materials Engineering Faculty Publications and Presentations

A proprietary Liscic/Petrofer cylindrical Inconel 600 probe of 50-mm diameter and 200-mm length which was instrumented with three thermocouples on the same radius of the crosssection at the middle of the length was used to determine the differences in quenching performance of two vegetable oils, palm oil and canola oil, and they were compared to a locally produced conventional petroleum oil quenchant. The cooling curves and heat transfer performance of these oils were determined at different bath temperatures and agitation rates. The work was performed at the Quenching Research Centre located at the Faculty for Mechanical Engineering, University of Zagreb, …

Stackcbpred: A Stacking Based Prediction Of Protein-Carbohydrate Binding Sites From Sequence, Suraj Gattani

LSU New Orleans Theses and Dissertations

Carbohydrate-binding proteins play vital roles in many vital biological processes and study of these interactions, at residue level, are useful in treating many critical diseases. Analyzing the local sequential environments of the binding and non-binding regions to predict the protein-carbohydrate binding sites is one of the challenging problems in molecular and computational biology. Prediction of such binding sites, directly from sequences, using computational methods, can be useful to fast annotate the binding sites and guide the experimental process. Because the number of carbohydrate-binding residues is significantly lower than non-carbohydrate-binding residues, most of the methods developed are biased towards over predicting …

Modeling The Effect Of A Compartment Fire On Spaces Adjacent To A Bulkhead With And Without Attachments, Carl E. Hendrickson Ii

LSU New Orleans Theses and Dissertations

Structural fire protection is an integral component of shipboard fire safety. There are national and international regulations that delineate requirements for the insulation placed throughout ships. The attachments that penetrate the insulation for hanging wires and pipes can disrupt the integrity of the division, and cause a failure to adhere to the regulations. This problem will be analyzed by using a simplified lumped capacitance model and ANSYS FLUENT CFD. A standard time-temperature fire curve is applied to the fire side of the enclosure. The thermal conductivity of the insulation and steel are made to be temperature dependent. The density of …

Very High Frequency Bipolar Junction Transistor Frequency Multiplier Drive Network Design And Analysis, Daniel Dale Schaeffer

Dissertations and Theses

The function of a frequency multiplier is verbatim -- a frequency multiplier is a circuit that takes a signal of particular frequency at the input and produces harmonic multiples of the input signal's frequency at the output. Their use is widespread throughout history, primarily in the application of frequency synthesis. When implemented as a part of a large system, a chain of multipliers can be used to synthesize multiple reference signals from a single high-performance reference oscillator.

Frequency multiplier designs use a variety of nonlinear devices and topologies to achieve excitation of harmonics. This thesis will focus on the design …

A Simplified Crossing Fiber Model In Diffusion Weighted Imaging, Sheng Yang, Kaushik Ghosh, Ken Sakaie, Satya S. Sahoo, Sarah J. Ann Carr, Curtis Tatsuoka

Mathematical Sciences Faculty Research

Diffusion MRI (dMRI) is a vital source of imaging data for identifying anatomical connections in the living human brain that form the substrate for information transfer between brain regions. dMRI can thus play a central role toward our understanding of brain function. The quantitative modeling and analysis of dMRI data deduces the features of neural fibers at the voxel level, such as direction and density. The modeling methods that have been developed range from deterministic to probabilistic approaches. Currently, the Ball-and-Stick model serves as a widely implemented probabilistic approach in the tractography toolbox of the popular FSL software package and …

Non-Canonical Amino Acid Labeling In Proteomics And Biotechnology, Aya M. Saleh, Kristen M. Wilding, Sarah Calve, Bradley Charles Bundy, Tamara L. Kinzer-Ursem

Faculty Publications

Metabolic labeling of proteins with non-canonical amino acids (ncAAs) provides unique bioorthogonal chemical groups during de novo synthesis by taking advantage of both endogenous and heterologous protein synthesis machineries. Labeled proteins can then be selectively conjugated to fluorophores, affinity reagents, peptides, polymers, nanoparticles or surfaces for a wide variety of downstream applications in proteomics and biotechnology. In this review, we focus on techniques in which proteins are residue- and site-specifically labeled with ncAAs containing bioorthogonal handles. These ncAA-labeled proteins are: readily enriched from cells and tissues for identification via mass spectrometry-based proteomic analysis; selectively purified for downstream biotechnology applications; or …

Statistical Viability Analysis Of United States Air Force Estimating Cost Factor For Sustainable Construction, Philip A. Ramsey, Diedrich Prigge, Torrey J. Wagner, Alfred E. Thal Jr.

Faculty Publications

Varying legislation and executive orders coupled with needs for energy resiliency have led the United States Air Force (USAF) to pursue sustainable construction. However, the limited understanding of initial costs to implement these changes have contributed to poor project cost estimating, resulting in 62 percent of USAF projects experiencing more than 5 percent cost growth. After reviewing 1628 USAF Military Construction (MILCON) construction projects in 922 category codes (CATCODEs), a twotailed t-test for populations with unequal variance was accomplished on the final normalized contract cost for 340 projects in 16 CATCODEs executed between 2002 and 2017. This analysis provides a …

Development Of Traffic Live Load Models For Bridge Superstructure Rating With Rbdo And Best Selection Approach, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Reliability-based design optimization (RBDO) is frequently used to determine optimal structural geometry and material characteristics that can best meet performance goals while considering uncertainties. In this study, the effectiveness of RBDO to develop a rating load model for a set of bridge structures is explored, as well as the use of an alternate Best Selection procedure that requires substantially less computational effort. The specific problem investigated is the development of a vehicular load model for use in bridge rating, where the objective of the optimization is to minimize the variation in reliability index across different girder types and bridge geometries. …

David G. Tarboton Named Utah Water Research Lab Director | College Of Engineering, Utah State University

College of Engineering News

One of the state’s largest research laboratories is getting a new director. David Tarboton, a professor of civil and environmental engineering at Utah State University, will lead the Utah Water Research Laboratory beginning July 1.

Triperyleno[3,3,3]Propellane Triimides: Achieving A New Generation Of Quasi-D3h Symmetric Nanostructures In Organic Electronics, Lingling Lv, Josiah Roberts, Chengyi Xiao, Zhenmei Jia, Wei Jiang, Chad Risko, Lei Zhang

Chemistry Faculty Publications

Rigid three-dimensional (3D) polycyclic aromatic hydrocarbons (PAHs), in particular 3D nanographenes, have garnered interest due to their potential use in semiconductor applications and as models to study through-bond and through-space electronic interactions. Herein we report the development of a novel 3D-symmetric rylene imide building block, triperyleno[3,3,3]propellane triimides (6), that possesses three perylene monoimide subunits fused on a propellane. This building block shows several promising characteristics, including high solubility, large π-surfaces, electron-accepting capabilities, and a variety of reactive sites. Further, the building block is compatible with different reactions to readily yield quasi-D_3h symmetric nanostructures (9, …

Asphalt Binder Laboratory Short-Term Aging, Hamzeh Haghshenas, Robert C. Rea

Nebraska Department of Transportation: Research Reports

The Rolling Thin Film Oven (RTFO) is widely used to simulate asphalt binder short-term aging. However, there is a general interest to improve the current short-term aging protocol especially for reducing the aging time. Besides, there are some doubts about the capability of RTFO in the simulation of aging of highly polymer modified asphalt binders which is mainly due to improper dispersion of such binders in the bottles during rotating and creeping of highly viscous binder out of the bottles during rotation. This work addresses the effect of time, temperature, airflow rate, and weight of asphalt binder on the laboratory …

Applying Internet Of Things Principles To Spacecraft, Brian K. Dixon

Theses and Dissertations

This thesis proposes the adaptation of the IEEE 1451 Transducer Electronic Data Sheet (TEDS) for usage in spacecraft subsystems. In the 1990s, TEDS initially were developed as a standardized method to provide metadata required for the operation of a transducer by a microcontroller or data acquisition device. The metadata provides information that identifies and documents key characteristics of the transducer, thereby facilitating plug-and-play interoperability within a system and across networks. An overarching goal of this thesis is to make a case for adapting and extending the TEDS concept as a means for self-describing critical physical components of a CubeSat nanosatellite. …

Pt Nanoparticles Decorated Heterostructured G-C3n4/Bi2moo6 Microplates With Highly Enhanced Photocatalytic Activities Under Visible Light, Z. Jia, F. Lyu, Laichang Zhang, S. Zeng, Shunxing Liang, Y. Y. Li, J. Lu

Research outputs 2014 to 2021

Exploring an efficient and photostable heterostructured photocatalyst is a pivotal scientific topic for worldwide energy and environmental concerns. Herein, we reported that Pt decorated g-C₃N₄/Bi₂MoO₆ heterostructured composites with enhanced photocatalytic performance under visible light were simply synthesized by one-step hydrothermal method for methylene blue (MB) dye degradation. Results revealed that the synthetic Pt decorated g-C₃N₄/Bi₂MoO₆ composites with Bi₂MoO₆ contents of 20 wt.% (Pt@CN/20%BMO) presented the highest photocatalytic activity, exhibiting 7 and 18 times higher reactivity than the pure g-C₃N₄ and …

Ulsi And Tft Technologies In Industry, Research And Higher Education In France: An Evolution Towards Innovation Resulting From Close And Sustainable Interaction, Olivier Bonnaud

Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors VII (ULSIC VS TFT 7)

The semiconductor industry and associated microelectronic production began in France in the early 1980s as part of the national microelectronics plan launched by the French government to meet the needs of new economic sectors that are heavy users of microelectronic products. Indeed, microelectronic circuits, devices and systems are the key elements of the information technology field, which includes computer and communications capabilities, and application fields such as aerospace, transport, and energy, mainly. Several new technologies had to be developed, corresponding to the first advent of communication tools such as Minitel (ancestor of the web) or credit cards, which then underwent …

Ce 200a-041: Surveying Lab, Allison Lapatka

Civil and Environmental Engineering Syllabi

No abstract provided.

The Effect Of Fabric Architecture On The Processing And Properties Of Composites Made By Vacuum Assisted Resin Transfer Molding, Francois Ntakobatagize, Oscar Ntakontagize, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

The goal of this research project was to evaluate and compare the effect of fabric architecture on the processing and properties of composites made by Vacuum Assisted Resin Transfer Molding (VARTM). The fabric architectures investigated included plain weave, satin weave, and warp-knit unidirectional. The fiber types included E-glass and standard modulus carbon fiber. Flat panels were fabricated with a lab scale VARTM process using an epoxy resin system. Fabric plies were cut to 45 cm x 30 cm (18 in. x 12 in.), and the number of plies used depended on the fiber areal weight of each fabric to produce …

Mechanical Properties And Applications Of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing, Matthew J. Reich, Aubrey Woern, Nagendra Gautam Tanikella, Joshua M. Pearce

Michigan Tech Publications, Part 1

Past work has shown that particle material extrusion (fused particle fabrication (FPF)/fused granular fabrication (FGF)) has the potential for increasing the use of recycled polymers in 3D printing. This study extends this potential to high-performance (high-mechanical-strength and heat-resistant) polymers using polycarbonate (PC). Recycled PC regrind of approximately 25 mm² was 3D printed with an open-source Gigabot X and analyzed. A temperature and nozzle velocity matrix was used to find useful printing parameters, and a print test was used to maximize the output for a two-temperature stage extruder for PC. ASTM type 4 tensile test geometries as well as ASTM-approved …

Conference Program, Yue Kuo, Junichi Murota, Yasuhiro Fukunaka, Yukiharu Uraoka

Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors VII (ULSIC VS TFT 7)

No abstract provided.

An Afternoon With General Thomas P. Stafford, Stafford Air & Space Museum

Programs

An Afternoon with General Thomas P. Stafford

Sunday, May 19th, 2019 at 2:00 P.M. at the Weatherford High School Performing Arts Center.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Novel Low Shear 3d Bioreactor For The Scaled Production Of High Purity Human Mesenchymal Stem Cells, Andrew Burns

KGI Theses and Dissertations

Human mesenchymal stem cells are an ideal candidate for stem cell therapies. They have been researched since the 1960’s and can differentiate into many desired functional cell types without undergoing teratogenesis. However, higher yields are needed for a marketable, successful stem cell therapy. To accomplish this, cells will have to be cultured to expand them to therapeutically relevant dosages for multiple patients. Bioreactor production is an ideal method to solve this problem.

The aim of this thesis is to test and validate a novel bioreactor for the cultivation of human mesenchymal stem cells. In this work, we investigate a novel …

Apollo 10, 50th Anniversary Gala, Stafford Air & Space Museum

Programs

The Apollo 10 50th Anniversary Gala was held on May 18th, 2019 at the Stafford Air & Space Museum in Weatherford, Oklahoma.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].